Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC VILLAGE HARIGAON PO PS NIKAMUL SATRA TEZPUR DIST SONITPUR ASSAM | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹38.2 L+₹90,166 (2.42%)Rejected-Finance BANKODI BANKODI BANKODI KALYANPUR JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L2 | Rejected-Finance BEING LOWEST BID | |
| 3 | L3₹41.8 L+₹4.5 L (12.1%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST BID | |
| 4 | L4₹42.6 L+₹5.3 L (14.3%)Rejected-Finance | L4 | Rejected-Finance BEING LOWEST BID | |
| 5 | L5₹43.6 L+₹6.3 L (16.8%)Rejected-Finance CAMP AT GORUBANDHA MISSAMARI ASSAM 784506 | SONITPUR | ASSAM | 784506 | L5 | Rejected-Finance BEING LOWEST BID |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
21 Oct 2022, 6:00 pmClosed
GE MISAMARI
PO-Missamari Dist-Sonitpur Assam
PROVN OF HARDSTANDING FOR PARKING OF AVIATION ASSETS AND SANCTIONED WORK OF CSD DEPOT UNDER GE MISAMARI
2022_MES_554353_1
8307
Open Tender
Civil Works
Item Rate
270 days
GE MISAMARI
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
Yes
GE MISAMARI
₹89,000
Yes
16 May 2023
27 Sept 2022
24 Oct 2022
27 Sept 2022
21 Oct 2022
11 Oct 2022
Amount
Excavation over area n exc 1.5 m deep and getting out in soft/loose soil , all as specified and directed.
Removing surplus soil to a distance exceeding 5.00 Km but not exceeding 10.00 Km and depositing where directed at level not exceeding 1.50m above the starting point, complete all as specified and directed
Rolling and consolidating formation surface in cutting with 8 to 10 tonne power roller including filling in deperession which occurs during the process of rolling to required gradient and camber, complete all as specified and directed.
M&L for Soling 300 mm thick spread thickness (or sub base) with broken boulders or quarried stone, inter stices filled , surface formed and rolled and consolidated to required gradiant and camber, complete all as specified and directed.
M&L for 100 mm thick Granular Sub base one layers on carrage way using shingle or gravel, spread, rolled and consolidated to gradiant and camber required, complete all as specified and directed.
M&L for 75 mm thick Granular Sub base one layers on carrage way using shingle or gravel, spread, rolled and consolidated to gradiant and camber required, complete all as specified and directed.
M&L cement concrete (1:5:10) Type E2 (using 40mm graded aggregate) as in foundation,mass concrete, etc, complete all as specified and directed.
M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.exc 25 cm thick, complete all as specified and as directed.
M&L providing & fixing 150 micron thick polythene film laid in floors, complete all as specified and directed
M&L for RCC, M30 Design Mix (using 20 mm graded stone aggregate) as in foundations, footings, basement slabs and mass, complete all as specified and directed. Note : Reinforcement & Formwork will be measured and paid separately under relevant items.
M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
Use and waste form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter similar work rough finished surfaces, complete all as specified and directed.
Finishing the concrete surface / pavement by brooming while concrete is in green, complete all as specified and directed.
M&L for forming 20 mm thick expansion joints 250mm deep filled with pre form bituminus filler and top 30 mm primed and sealed with sealing compound Grade A, complete all as specified and directed.
M&L for forming contraction joints(Dummy) joints 50 mm deep 10 mm wide filled with sealing compound Grade A, complete all as specified and directed.
M&L forming construction joints 250 mm deep 10 mm wide filled with sealing compound Grade A, complete all as specified and directed.
M&L for painting lines, dashes, arrows, letters etc on roads, pavements and the like, exc 10 cm wide with road marking paint, white or golden yellow.
M&L for Complete removal of existing treatment of walls and applying two coat of cement base paint, complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described applying one coat of synthetic enamel paint, complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of stone/ concrete Surfaces in cement mortar 1:6 incl finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer, with alkali resistant priming paint, complete all as specified and as directed.
Sneh Construction Co
R D ENTERPRISE
M/S Mahabir Traders
Saraswati Auto Works
Sunrise Enterprise
M/S S.S.Corporation
M/S Singha Enterprise
shree kamakhya traders
MAA CONSTRUCTION
Markson
United Traders
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .