SPECIAL REPAIR TO SECURITY OFFICE AND RECREATION HALL IN DEPOT AREA (BUILDING NO P-01) AT NAD SUNABEDA

Amount

M&L 10 mm thick rendering in CM 1:6 and 2nd coat of 5 mm thick in CM 1:4 with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement and including taking down complete all as specified and directed. NOTE: WPC will be measured and paid separately.

M&L preparation of new plastered wall surface and including applying two coats of weather shield ultra exterior premium emulsion paint over a coat of exterior primer over a coat of wall care putty complete all as specified and directed.

M&L 10 mm thick rendering on fair faces of brick or concrete sufaces in cement mortar 1:6 and including finishing even and smooth (without using extra cement) and taking down complete all as specified and directed.

M&L 5 mm thick rendering on ceiling surfaces in CM 1:3 and including finishing even & smooth (without using extra cement) and taking down complete all as specified and directed.

M&L preparation of newly plastered or unplastered ceiling surfaces and including applying three coats white wash complete all as specified and directed.

M&L preparation of old plastered or unplastered ceiling surfaces and including applying two coats of white wash complete all as specified and directed.

M&L complete removal of existing tretment on walls and including applying two coats of weather shield ultra exterior premium emulsion paint over a coat of exterior primer over a coat of wall care putty complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in footpath, plinth protection etc, surface finished even and smooth without using extra cement and including demolition & removal of demolished materials complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20 mm graded aggregate as in roof padding, roof kerbs or mud stops and including demolition & removal of demolished materials complete all as specified and directed.

M&L for roof treatment including the following complete all as specified and as directed:- (i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm. (ii) 15 mm thick screed bed in CM 1:4 on surface mixed with WPC as per manufacturers instructions. (iii) Cleaning of plastered surface and applying one coat of oil based bituminous primer conforming to IS -3384 (latest) @ 0.30 Ltr / Sqm.

(iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.80 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (v) Applying one coat of bituminous aluminium primer @ 0.1. Lit / Sqm. Note:- (a) Primer, APP membrane & bituminous aluminium paint shall be of same manufacturer and executed through applicator authorised by the approved manufacturer only. (b) Membrane shall be laid with side overlap of 100 mm and end overlap of 150 mm as per manufacturers instruction. (c) WPC will be measured and paid seperately.

M&L light shade vitrified ceramic tiles 8 to 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match to the shade of tile and including 15 mm thick screed bed in CM 1:6 and dismantling complete all as specified and directed.

All as per Sl. Item No. 11 above but in skirting with 10 mm thick rendering in CM 1:4.

S&F 6 to 7 mm thick coloured non skid ceramic tiles (squares / rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles and including 15 mm thick screed bed in CM 1:6 and dismantling complete all as specified and directed.

S&F coloured glazed ceramic tiles in vertical surfaces 350 x 250 mm / 450 x 350 mm, 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surfaces such as skirting / dado and including 10 mm thick rendering in CM 1:4 and dismantling complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, cleaning & re-fixing the same in new or old position in walls / ceiling or in floors etc. complete all as specified and as directed.

All as per Sl. Item No. 15 above but 20 mm

All as per Sl. Item No. 15 above but 25 mm

Refixing 15 mm bore old steel tubing and connections in new or old position on wall / ceiling / floors etc. complete all as specified and directed. Note:- Serviceable quantity obtained from taking down shall be reused under this item.

All as per Sl. Item No. 18 above but 20 mm

All as per Sl. Item No. 18 above but 25 mm

S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.

All as per Sl. Item No. 21 above but 20 mm

All as per Sl. Item No. 21 above but 25 mm

M&L brick work with fly ash bricks, straight or curved on plain exc. 6 m mean radius built in cement mortar 1:6 and including demolition complete all as specified and directed.

S&F in repairs wash hand basin vitreous china white flat back of size 580 X 450 mm with brackets, complete all as specified and directed.

M&L 18 to 20 mm thick Makrana white marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L RCC M-20, 1:11/2:3 mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and coloumns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

All as per Sl. Item No. 27 above but including demolition.

M&L RCC M-15, 1:2:4 mix using 20 mm graded stone aggregate as in chajjas and including demolition complete all as specified and directed.

M&L form work to sides and soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed.

All as per Sl. Item No. 30 above but in chajjas

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 450.mm long pipe complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, with or without lettered hot or cold with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs one piece EWC Elba and including integrated cistern, seat cover and twin flush fittings P or S trap concealed of size 690 x 370 x 710 mm, soft close cover (Colour-Snow white) complete all as specified and directed. Make : Hindware Cat Part No. 92047, 92037, 92048 or equivalent in CERA, JAQUAR

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 litres capacity fixed including syphonic action type, ball valve, float and handle including brackets etc, complete all as specified and directed

S&F in repairs viterous china urinals, bowl type (back or corner wall type), of size 465 x 355 x 265 mm white and including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe to flushing cistern complete all as specified and directed.

S&F in repairs soap dish of chromium plated fixed with screws complete all as specified and directed.

S&F in repairs shower rose brass chromium plated 125 mm size complete all as specified and directed.

S&F in repairs CP tubular rail, 20 mm dia 600 mm long, brass chromium plated complete all as specified and directed.

S&F in repairs 15 mm bore CP bip taps with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each including taking out of holdfast & making in CM (1:4) complete all as specified and directed.

All as per Sl. Item No. 45 above but exc. 1.5 sqm and n. exc. 4.0 sqm each

Taking down shutters of any descriptionn n. exc. 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and n. exc 2 sqm each complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, and including tarring on back of chowkats complete all as specified and directed.

S&F 35 mm thick, factory made second class hard wood rail and style, plain framed panelled shutter (any number of panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc.; sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.24 (a); complete all as specified and directed.

S&F 30 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. with edges of sash bars and framing moulded framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass; for windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) complete all as specified and directed.

M&L in repairs 18 / 19 mm thick veneered particle board solid core interior grade with decorative face veneers on one face fixed with screws to frame work as in pelmet boxes, etc complete all as specified and directed.

S/F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strick inside complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 125 mm MS butt hinges medium weight cold rolled complete all as specified and directed.

All as per Sl. Item No. 56 above but 75 mm

S&F in repair continuous (piano) hinges MS bright finish or galvanised width of flaps when open 40 mm complete all as specified and directed.

S&F 250 mm hasp and staple aluminium anodised, saftey type, with mild steel hinge pin including bolt to hinge plate and fixed with scrwes complete all as specified and directed.

S&F 150 mm extruded aluminium handles fabricated type complete all as specified and directed.

All as per Sl. Item No. 60 above but 100 mm

S&F 200 mm aluminium anodised barel tower bolt of extruded section complete all as specified and directed.

All as per Sl. Item No. 62 above but 150 mm

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane complete all as specified and directed.

All as per Sl. Item No. 64 above but in repairs

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified and directed.

All as per Sl. Item No. 66 above but in repairs

S&F in repairs curtain rod of 18 mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F in repairs MS helical door spring 300 mm long mild steel including roller and roller plate complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20 mm graded aggreagate in lintels upto 1.5 m clear span, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L mild steel for hold fast, wall ties similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coast of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Sl. Item No. 75 above but on steel surfaces

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description, n.exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8, type D-2, using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L coloured chequered cement concrete tiles 300 mm x 300 mm x 20 to 25 mm thick with grey cement & pigment, set, jointed and pointed in neat cement slurry laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed.

S&F in repairs 1000 litres rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including demolition of old RCC tank and removing all debris in low lying areas all as specified in SSR Part -I complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed with necessary fittings for iron pipe size 20 mm bore and fixed (Minimum weight 20 mm - 210 gms) complete all as specified and directed.

S&F false ceilling using anodised aluminium T & L sections snap grid frame work of size 610 x 610 mm and including runners of size 15 mm x 32 mm, 6 mm dia (upto 1200 mm length) hangers, adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm, 40 mm long complete all as specified and directed.

S&F 9 mm thick Gypsum tiles of size 605 x 605 mm, moisture resistant, micro looks edge inserted to GI / aluminium frame work complete all as specified and directed.

M&L preparation of new plastered wall surfaces and including applying two coats of plastic emulsion paint over a coat of primer and over a coat of wall care putty as per manufacturers instructions complete all as specified and directed.

M&L 18 to 20 mm thick granite stone in steps, jambs, pillars, window cills, cooking platform, office counter set etc, in cement morter (1:4) and including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work complete all as specified and directed.

S&F anodised aluminium powder coating (thickness of powder coating not less than 50 micron) frame for doors, windows ventilators, and aluminium partition with one or more rebates and including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium powder coating (thickness of powder coating not less than 50 micron) doors shutters aluminium section weighing 0.55 kg/m and including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 nos. in each door, hinges windows ventilators with one or more rebates including joining cleat for fixing with locking arrengments etc, complete all as specified and directed. Note: Glass shall be measured and paid separately

S&F aluminium anodised powder coating (thickness of powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100 mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. Note: Glass shall be measured and paid separately

S&F 5 mm thick heat absorbing glass of any size and including fixing to aluminium doors and frames complete all as specified and directed.

M&L 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed to aluminium frame work complete all as specified and directed.

S&F in repairs aluminium (extruded section) door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed.

S&F 150 mm aluminium anodised barel tower bolt of extruded section complete all as specified and directed.

All as per Sl. item No. 94 above but 100 mm

Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for laying of cables etc, n.exc. 10 sqm on plan and n. exc. 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

All as per Sl. item No. 96 above but in hard / dense soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soil n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

S&F 50 mm bore GI tubes, 'medium grade' galvanised, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

All as per Sl. Item No. 100 above but 20 mm

S&F 50 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

All as per Sl. Item No. 102 above but 20 mm

M&L cutting the existing pipe line for alterations or additions in position without taking down and inserting Tee of 100 x 100 x 50 mm for tapping complete all as specified and directed.

M&L cutting the existing road and laying of GI pipe and including making good with PCC type B1 1:2:4 (20 mm graded aggregate) on surface complete all as specified and directed.

Supply only integral water proofing compound of approved make.

M&L valve chamber of internal size 750 x 750 x 750 mm comprising of 50 mm thick PCC 1:5:10 type E2 foundation, 200 mm thick brick wall in CM 1:6, 15 mm thick plastering in CM 1:4 internally and externally up to 50 mm below GL, 100 mm thick PCC 1:3:6 type B1 as in copings, 3 mm thick MS sheet cover with suitable hinges and locking arrangement, painting steel surfaces with two coats of synthetic enamel paint over a coat of primer and necessary earth work and excavation in any type of soil complete all as specified and directed.

M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.

Supply and laying reinforced precast concrete cable cover class LV type 1 flat, size 250 mm x 150 mm x 40 mm complete all as specified and directed.

Supply and replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 3½ core, complete all as specified and directed.

All as per Sl. item No. 110 above but 25 sqmm 4 core

S&F 40 mm bore galvanised steel tubing, light grade with necessary fittings fixed along electric pole etc, for cable protectionscomplete all as specified and directed.

M&L feeder pillar box made out of CRCA sheet 2 mm thick of suitable size but not less than 0.45 x 0.45 x 0.3 m size outdoor Pedestal type, totally enclosed made of rust proof material and including aluminium bus bar with suitable for three phase and four wire LT AC, 50 Hz 415 V with MCB TPN 63 Amp -01 No (incomer), MCB TPN 63 A - 02 Nos (One spare) with LED Indicating Lamps for each phase with colour code Red Yellow Blue for R, Y and B Phases and including taking down complete all as specified and directed.

M&L point wiring with 1.5 sqmm PVC insulated unsheathed multistranded copper cable of FRLSH grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in concealed PVC Conduit not less than 20 mm with pressed steel in concealed modular MS box duly and including covered with modular sheets for mounting modular switches / sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / bell point 5 amp socket on independent board controlled by one switch and including taking down complete all as specified and directed. Note- The quoted rate is deemed to be include cutting, chasing, pinning and making good the disturbed surface.

All as per Sl.item No. 114 above but one 3 pin socket outlet 5 amps on independent board.

All as per Sl.item No. 114 above but one 3 pin socket outlet 5 amps on the same board.

All as per Sl.item No. 114 above but with 2.5 sqmm cable with one run of 2.5 sqmm cable as earth continuity on independent board.

S&F metal flush box 8 module and including modular white cover plate with frame complete all as specified and directed.

All as per Sl.item No. 118 above but 4 module

All as per Sl.item No. 118 above but 3 module

All as per Sl.item No. 118 above but 2 module

S&F modular switch 6 amps single module complete all as specified and directed.

All as per Sl.item No. 122 above but 16 amps

S&F modular socket 6 amps 5 pin socket 02 Module complete all as specified and directed.

All as per Sl.item No. 124 above but 6/16 amp 3 pin combined

S&F modular fan regulator 2 module complete all as specified and directed.

S&F ceiling rose, 3 phase / PVC / polycarbonate, isolated body for surface type, bakelite 65 x 50 mm three terminal complete all as specified and directed.

S&F lamp holder (angular) insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F energy efficient light emmitting for high efficiency recess mounted LED Luminaire with deep drawn CRCA housing efficacncy of 120 lm/w designed for optimal lighting with comfortable 36 Watt, high transculent diffuser, soft glare free light suitable for 600 mm x 600 mm for modular / POP / Gypsum Ceiling and including with all accessories luminaire with CRCA powder coated body & provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on ceiling with necessary fixing accessories complete all as specified and directed.

Supply and replacement of energy efficient light emmitting fluorescent light fitting 1 x 20 watt, four feet, white fittings with LED rod and including all accessories & provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall with necessary fixing accessories complete all as specified and directed.

Supply and replacement of energy efficient light emmitting fluorescent light fitting 1x10 watt two feet LED tube light with LED rod complete and including all accessories & provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall with necessary fixing accessories complete all as specified and directed.

S&F LED B22 cool day light lamp B-22 holder based with polycarbonate body and including aluminium heat sink with warm white, 7 W LED Lamp complete all as specified and directed.

Taking down existing ceiling fans of any sweep and including keeping at site in safe custody for carry out repairs and refixing the same in serviceable condition after completion of repair works in old or new location complete all as specified and directed.

M&L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- (i) Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. (ii) The quoted rate is deemed to be include cutting, chasing, pinning and making good the disturbed surface.

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

Supply and replacement of MCB DB TPN 4 Way, 415 Volt AC supply and including 200 Amps rated bus bar with sheet metal and steel sheet phosphatised powder coated with bus bar, neutral link earth bar and Din Rail having IP 42-IK 09, connection with aluminium / copper lugs, making good for matching with existing surface with the following complete all as specified and directed:- [a] MCB TPN 63 Amps - 01 No. [b] MCB SPN 6 to 32 Amps - 03 Nos. [c] MCB SP 6 to 32 Amps - 06 Nos.

Supply and replacement of MCB DB and MCB DB SPN Double door, 8 way 240 Volts, 50 Hz, single phase, AC supply and including 200 Amps rated bus bar with steel sheet phosphatised powder coated with bus bar, neutral link earth bar and Din Rail having IP 42-IK 09, connection with aluminium / copper lugs, making good for matching with existing surface with the following complete all as specified and directed:- [a] MCB SPN 32 Amps - 01 No. [b] MCB SP 6 to 32 Amps - 06 Nos.

Supply and replacement of LED street light fitting 60 watt, made up of pressure die cast aluminum housing with high power LEDs with secondary optics, IP66 protection and including 40 bore GI pipe bracket upto 1.5 m long, fixed with 2 Nos. FI 40 x 6 mm clamps with necessary nuts, bolts complete all as specified and directed.

M/S SANTOSH SATAPATHY