Loading
Loading…
Loading…
Tender Value
₹496.9 Cr
EMD Value
₹5 Cr
Closing Date
24 Jul 2026, 6:00 pm
Group General Manager Contract (EnM)-I
NHPC Limited Contract (EnM) Division, 2nd Floor, Jyoti Sadan, NHPC Office Complex, Sector-33, Faridabad-121003 (Haryana)
Lot-2a Electro-mechanical works (Except GSU Transformer, GIS, XLPE Cable and Switchyard Equipment) of 260 MW (2X130MW) Dulhasti Stage-II H.E Project, Kishtwar District of UT of J and K, India
2026_NHPC_905459_1
NH/Conts(EnM)-I/Dulhasti Stage-II/ENM/2026/01
Open Tender
Electrical Works
1149 days
Kishtwar District of UT of J and K, India
As per tender document
11 documents required · 11 mandatory
₹10,000
NHPC Limited
₹5 Cr
NHPC Limited, Faridabad
29 May 2026
29 May 2026
29 Jul 2026
29 May 2026
24 Jul 2026
3 Jul 2026
29 May 2026 - 12 Jun 2026
19 Jun 2026
GENERAL TECHNICAL REQUIREMENTS
Unit Model as specified at Section 1 in clause 1.6.4 of Vol.3B.
Documentation / record of the work / activities as specified at Section 1 in clause 1.6.1 of Vol.3B.
Technical documentation as specified at Section 1 in clause 1.6.3 of Vol.3B.
TURBINE AND ACCESSORIES
Vertical Shaft Francis Turbine which shall produce sufficient power (further 10% over load) at rated speed 187.5 rpm, rated head 135.1 m with 85% guide vane opening to generate 131.98 MW at 0.85 power factor at generator terminal, complete with all accessories, auxiliary equipment including model testing and field acceptance tests as per specifications and scope defined in Section 2 of Vol.3B.
Specified Spare parts (Details as per Section 2, clause no. 2.8 of Vol.3B).
Tools and instruments (as per Section 2, clause no. 2.9 of Vol.3B).
DIGITAL GOVERNING SYSTEM AND ACCESSORIES
Digital Programmable Electronic type governor including oil-pumping units, pressure and sump tanks, allied valves and piping as per specifications and scope defined in Section 3 of Vol.3B.
Specified Spare parts (Details as per Section 3, clause no. 3.8 of Vol.3B).
Tools and instruments (as per Section 3, clause no. 3.9 of Vol.3B).
MAIN INLET VALVE AND ACCESSORIES
Main Inlet Valve of Butterfly Valve type. including oil-pumping units, pressure and sump tanks, allied valves and piping as per specifications and scope defined in Section 4 of Vol.3B.
Specified Spare parts (Details as per Section 4 , clause no. 4.8 of Vol.3B).
Tools and instruments (as per Section 4, clause no. 4.9 of Vol.3B).
GENERATOR
130 MW rated capacity with further 10% overload capacity at 13.8kV and 0.85 power factor, 50 Hz synchronous generator, direct driven, vertical shaft, complete with thrust and guide bearings, upper and lower bracket, other components and auxiliaries as per specifications and scope defined in Section 5 of Vol.3B.
Specified Spare parts (Details as per Section 5, clause no. 5.8 of Vol.3B).
Tools and instruments (Details as per Section 5, clause no. 5.9 of Vol.3B).
STATIC EXCITATION SYSTEM
Static Excitation system equipment complete with DVR, excitation transformer and other accessories as per specifications and scope defined in Section 6 of Vol.3B.
Specified Spare parts (Details as per Section 6, clause no. 6.8 of Vol.3B).
Tools and instruments (Details as per Section 6 , clause no. 6.9 of Vol.3B).
BUS DUCT
Bus duct, isolated type, CT, PT & SP along with all accessories and terminals cubicles and equipment as per specifications and scope defined in Section 7 of Vol.3B.
Specified Spare parts (Details as per Section 7, clause no. 7.8 of Vol.3B).
Tools and instruments (Details as per Section 7, clause no.7.9 of Vol.3B).
DC SYSTEM
220V battery System consisting of battery banks, battery chargers, UPS, 220 V and 48 V distribution boards of appropriate ratings, racks as per specifications and scope defined in Section 8 of Vol.3B.
Specified Spare parts (Details as per Section 8, clause no. 8.8 of Vol.3B).
Tools and instruments (as per Section 8, clause no.8.9 of Vol.3B).
CONTROL AND MONITORING (SCADA) SYSTEM
Control and Monitoring System including SCADA, Control boards, reliable computers, colour video display units, LSD, Control networks, Optical cable, printer units, operating keyboards, etc. as per specifications and scope defined in Section 9 of Vol.3B
Control room furniture as specified at Section 9 in clause 9.5.17 of Vol.3B
Specified Spare parts (Details as per Section 9 of Vol.3B).
Tools and instruments (as per Section 9 of Vol 3 B)
PROTECTION SYSTEM
Electrical Protection System for generating units, generator step-up transformer, bus-bar, reactor, 11kV switchgear , LV & MV Switchgear, XLPE cable, outgoing transmission lines etc. complete with all accessories, wiring and cubicles etc. as per specifications and scope defined in Section 10 of Vol.3B.
Specified Spare parts (Details as per Section 10, clause no. 10.8 of Vol.3B).
Tools and instruments (as per Section 10, clause no. 10.9 of Vol.3B).
CABLING SYSTEM
Power, Control and instrumentation cables, cables trays, supporting structures, complete with cable terminals and all accessories as per specifications and scope defined in Section 11 of Vol.3B.
Specified Spare parts (Details as per Section 11 , clause no. 11.8 of Vol.3B).
Tools and instruments (as per Section 11, clause no. 11.9 of Vol.3B).
MV SWITCHGEAR & AUXILIARY TRANSFORMERS
11KV Switchgear along with all accessories as per specifications and scope defined Section 12 of Vol.3B.
Unit Tap-off Transformer (Dry Type, 13.8 / 11 kV, 4 MVA) associated with all accessories as per specifications and scope defined in Section 12 of Vol.3B.
Specified Spare parts (Details as per Section 12, clause no. 12.8 of Vol.3B).
Tools and instruments (Details as per Section 12 , clause no. 12.9 of Vol.3B).
DG SETS
1000 kVA, 11kV, 0.8 pf (lagging) silent DG Set complete with all accessories, fuel system, instrumentation and wiring as per specifications and scope defined in Section 13 of Vol.3B.
Specified Spare parts (Details as per Section 13, clause no. 13.8 of Vol.3B).
Tools and instruments (Details as per Section 13, clause no. 13.9 of Vol.3B).
415V SWITCHGEAR AND AUXILIARY TRANSFORMERS
415V AC switchgear systems complete with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Unit Auxiliary Transformer (Dry Type 800 kVA, 11kV/0.415kV) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Station Service Transformer (Dry 2.5 MVA, 11kV/0.415kV) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 1000 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 500 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 250 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Specified Spare parts (Details as per Section 14, clause no. 14.8 of Vol.3B).
Tools and instruments (Details as per Section 14 , clause no. 14.9 of Vol.3B).
ILLUMINATION SYSTEM
Illumination System complete with all accessories including distribution boards, switchboards, cables/wires, lighting fixtures etc. for power house complex, Transformer cavern, Control block cavern, GIS cavern, Pothead yard area, and outside area as per specifications and scope defined in Section 15 of Vol.3B.
Specified Spare parts (Details as per Section 15, clause no. 15.8 of Vol.3B).
Tools and instruments (as per Section 15, clause no. 15.9 of Vol.3B
COMMUNICATION SYSTEM
Public Address System and EPBAX System as per specifications and scope defined in Section 16 of Vol.3B.
Conferencing System for powerhouse as per specifications and scope defined in Section 16 of Vol.3B.
Specified Spare parts (Details as per Section 16, clause no. 16.8 of Vol.3B).
Tools and instruments (Details as per Section 16, clause no. 16.9 of Vol.3B.).
ELECTRICAL WORKSHOP
Electrical Workshop as per specifications and scope defined in Section 17 of Vol.3B.
Specified Spare parts (Details as per Section 17, clause no. 17.8 of Vol.3B).
Tools and instruments (as per Section 17, clause no. 17.9 of Vol.3B).
ELECTRIC OVERHEAD TRAVELLING (EOT) CRANES
190/30/10 T EOT cranes for Power House along with equalizer beam for tandem operation complete with all accessories as per specifications and scope defined in Section 18 of Vol.3 B.
Electrical Overhead Traveling crane for MIV Cavern (Capacity 90 MT/10 MT) with all accessories as per specifications and scope defined in Section 18 of Vol.3B.
Electrical Overhead Traveling crane for Transformer Hall (Capacity 80 MT/20 MT) with all accessories as per specifications and scope defined in Section 18 of Vol.3B.
Specified Spare parts (Details as per Section 18, clause no. 18.8 of Vol.3B).
Tools and instruments (Details as per Section 18 , clause no. 18.9 of Vol.3B).
COOLING WATER SYSTEM
Close loop Cooling Water System and other accessories as per specifications and scope defined in Section 19 of Vol.3B.
Specified Spare parts (Details as per Section 19, clause no. 19.8 of Vol.3B)
Tools and instruments (Details as per Section 19, clause no. 19.9 of Vol.3B).
DRAINAGE AND DEWATERING SYSTEM
Drainage Water System complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
Dewatering system complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
Flood Dewatering system complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
Specified Spare parts (Details as per Section 20, clause no. 20.8 of Vol.3B).
Tools and instruments (as per Section 20, clause no. 20.9 of Vol.3B).
HEATING, VENTILATION AND AIR CONDITIONING SYSTEM (HVAC)
Heating, Ventilation and Air conditioning System complete with all accessories and controls as per specifications and scope defined in Section 21 of Vol.3B.
Specified Spare parts (Details as per Section 21, clause no. 21.10 of Vol.3B).
Tools and instruments (as per Section 21, clause no. 21.11 of Vol.3B).
GROUNDING SYSTEM
Grounding System for Power house complex, Control block cavern, Transformer cum draft tube gate cavern, GIS cavern, tailrace area, draft tube area and adjoining functional areas etc. complete with all accessories as per specifications and scope defined in Section 22 of Vol.3B.
Specified Spare parts (Details as per Section 22, clause no. 22.8 of Vol.3B).
Tools and instruments (Details as per Section 22, clause no. 22.9 of Vol.3B).
COMPRESSED AIR SYSTEMS
Low pressure compressed air system as per specifications and scope defined in Section 23 of Vol.3B
LP/HP compressed air system for blow down compressed air system for synchronous condenser mode operation as per specifications and scope defined in Section 23 of Vol.3B.
Specified Spare parts (Details as per Section 23, clause no. 23.8 of Vol.3B).
Tools and instruments (Details as per Section 23, clause no. 23.9 of Vol.3B).
FIRE FIGHTING SYSTEM
Fire Fighting System as per specifications and scope defined in Section 24 of Vol.3B.
Specified Spare parts (Details as per Section 24, clause no. 24.8 of Vol.3B).
Tools and instruments (Details as per Section 24 , clause no. 24.9 of Vol.3B).
OIL HANDLING SYSTEM
Insulating oil handling systems as per specifications and scope defined in Section 25 of Vol.3B.
Lubricating oil handling systems as per specifications and scope defined in Section 325 of Vol.3B.
Specified Spare parts (Details as per Section 25, clause no. 25.8 of Vol.3B)
Tools and instruments (as per Section 25, clause no. 25.9 of Vol.3B).
MECHANICAL WORKSHOP
Mechanical workshop as per specifications and scope defined in Section 26 of Vol.3B.
Specified Spare parts (Details as per Section 26, clause no. 26.8 of Vol.3B).
Tools and instruments (as per Section 26, clause no. 26.9 of Vol.3B).
ELEVATOR
Elevator complete with all accessories as per specifications and scope defined in Section 27 of Vol.3B.
Specified Spare parts (Details as per Section 27 , clause no. 27.8 of Vol.3B).
Tools and instruments (as per Section 27, clause no. 27.9 of Vol.3B).
SECURITY AND SURVEILLANCE SYSTEM
Security and Surveillance System with its all accessories as per specifications and scope defined in Section 28 of Vol.3B.
Specified Spare parts (Details as per Section 28, clause no. 28.8 of Vol.3B).
Tools and instruments (as per Section 28, clause no. 28.9 of Vol.3B).
Item Rate BoQ
BoQ_Ver3.0
Tender Reference No: NH/Conts(E&M)-I/Dulhast-Stage-II/ENM/2026/01 Tender ID: 2026_NHPC_ 905459 _1
Name of the Bidder/ Bidding Firm / Company :
Price Schedule-2: Local Transportation including inland insurance (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
GENERAL TECHNICAL REQUIREMENTS
Unit Model as specified at Section 1 in clause 1.6.4 of Vol.3B.
Documentation / record of the work / activities as specified at Section 1 in clause 1.6.1 of Vol.3B.
Technical documentation as specified at Section 1 in clause 1.6.3 of Vol.3B.
TURBINE AND ACCESSORIES
Vertical Shaft Francis Turbine which shall produce sufficient power (further 10% over load) at rated speed 187.5 rpm, rated head 135.1 m with 85% guide vane opening to generate 131.98 MW at 0.85 power factor at generator terminal, complete with all accessories, auxiliary equipment including model testing and field acceptance tests as per specifications and scope defined in Section 2 of Vol.3B.
Specified Spare parts (Details as per Section 2, clause no. 2.8 of Vol.3B).
Tools and instruments (as per Section 2, clause no. 2.9 of Vol.3B).
DIGITAL GOVERNING SYSTEM AND ACCESSORIES
Digital Programmable Electronic type governor including oil-pumping units, pressure and sump tanks, allied valves and piping as per specifications and scope defined in Section 3 of Vol.3B.
Specified Spare parts (Details as per Section 3, clause no. 3.8 of Vol.3B).
Tools and instruments (as per Section 3, clause no. 3.9 of Vol.3B).
MAIN INLET VALVE AND ACCESSORIES
Main Inlet Valve of Butterfly Valve type. including oil-pumping units, pressure and sump tanks, allied valves and piping as per specifications and scope defined in Section 4 of Vol.3B.
Specified Spare parts (Details as per Section 4 , clause no. 4.8 of Vol.3B).
Tools and instruments (as per Section 4, clause no. 4.9 of Vol.3B).
GENERATOR
130 MW rated capacity with further 10% overload capacity at 13.8kV and 0.85 power factor, 50 Hz synchronous generator, direct driven, vertical shaft, complete with thrust and guide bearings, upper and lower bracket, other components and auxiliaries as per specifications and scope defined in Section 5 of Vol.3B.
Specified Spare parts (Details as per Section 5, clause no. 5.8 of Vol.3B).
Tools and instruments (Details as per Section 5, clause no. 5.9 of Vol.3B).
STATIC EXCITATION SYSTEM
Static Excitation system equipment complete with DVR, excitation transformer and other accessories as per specifications and scope defined in Section 6 of Vol.3B.
Specified Spare parts (Details as per Section 6, clause no. 6.8 of Vol.3B).
Tools and instruments (Details as per Section 6 , clause no. 6.9 of Vol.3B).
BUS DUCT
Bus duct, isolated type, CT, PT & SP along with all accessories and terminals cubicles and equipment as per specifications and scope defined in Section 7 of Vol.3B.
Specified Spare parts (Details as per Section 7, clause no. 7.8 of Vol.3B).
Tools and instruments (Details as per Section 7, clause no.7.9 of Vol.3B).
DC SYSTEM
220V battery System consisting of battery banks, battery chargers, UPS, 220 V and 48 V distribution boards of appropriate ratings, racks as per specifications and scope defined in Section 8 of Vol.3B.
Specified Spare parts (Details as per Section 8, clause no. 8.8 of Vol.3B).
Tools and instruments (as per Section 8, clause no.8.9 of Vol.3B).
CONTROL AND MONITORING (SCADA) SYSTEM
Control and Monitoring System including SCADA, Control boards, reliable computers, colour video display units, LSD, Control networks, Optical cable, printer units, operating keyboards, etc. as per specifications and scope defined in Section 9 of Vol.3B
Control room furniture as specified at Section 9 in clause 9.5.17 of Vol.3B
Specified Spare parts (Details as per Section 9 of Vol.3B).
Tools and instruments (as per Section 9 of Vol 3 B)
PROTECTION SYSTEM
Electrical Protection System for generating units, generator step-up transformer, bus-bar, reactor, 11kV switchgear , LV & MV Switchgear, XLPE cable, outgoing transmission lines etc. complete with all accessories, wiring and cubicles etc. as per specifications and scope defined in Section 10 of Vol.3B.
Specified Spare parts (Details as per Section 10, clause no. 10.8 of Vol.3B).
Tools and instruments (as per Section 10, clause no. 10.9 of Vol.3B).
CABLING SYSTEM
Power, Control and instrumentation cables, cables trays, supporting structures, complete with cable terminals and all accessories as per specifications and scope defined in Section 11 of Vol.3B.
Specified Spare parts (Details as per Section 11 , clause no. 11.8 of Vol.3B).
Tools and instruments (as per Section 11, clause no. 11.9 of Vol.3B).
MV SWITCHGEAR & AUXILIARY TRANSFORMERS
11KV Switchgear along with all accessories as per specifications and scope defined Section 12 of Vol.3B.
Unit Tap-off Transformer (Dry Type, 13.8 / 11 kV, 4 MVA) associated with all accessories as per specifications and scope defined in Section 12 of Vol.3B.
Specified Spare parts (Details as per Section 12, clause no. 12.8 of Vol.3B).
Tools and instruments (Details as per Section 12 , clause no. 12.9 of Vol.3B).
DG SETS
1000 kVA, 11kV, 0.8 pf (lagging) silent DG Set complete with all accessories, fuel system, instrumentation and wiring as per specifications and scope defined in Section 13 of Vol.3B.
Specified Spare parts (Details as per Section 13, clause no. 13.8 of Vol.3B).
Tools and instruments (Details as per Section 13, clause no. 13.9 of Vol.3B).
415V SWITCHGEAR AND AUXILIARY TRANSFORMERS
415V AC switchgear systems complete with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Unit Auxiliary Transformer (Dry Type 800 kVA, 11kV/0.415kV) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Station Service Transformer (Dry 2.5 MVA, 11kV/0.415kV) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 1000 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 500 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 250 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Specified Spare parts (Details as per Section 14, clause no. 14.8 of Vol.3B).
Tools and instruments (Details as per Section 14 , clause no. 14.9 of Vol.3B).
ILLUMINATION SYSTEM
Illumination System complete with all accessories including distribution boards, switchboards, cables/wires, lighting fixtures etc. for power house complex, Transformer cavern, Control block cavern, GIS cavern, Pothead yard area, and outside area as per specifications and scope defined in Section 15 of Vol.3B.
Specified Spare parts (Details as per Section 15, clause no. 15.8 of Vol.3B).
Tools and instruments (as per Section 15, clause no. 15.9 of Vol.3B
COMMUNICATION SYSTEM
Public Address System and EPBAX System as per specifications and scope defined in Section 16 of Vol.3B.
Conferencing System for powerhouse as per specifications and scope defined in Section 16 of Vol.3B.
Specified Spare parts (Details as per Section 16, clause no. 16.8 of Vol.3B).
Tools and instruments (Details as per Section 16, clause no. 16.9 of Vol.3B.).
ELECTRICAL WORKSHOP
Electrical Workshop as per specifications and scope defined in Section 17 of Vol.3B.
Specified Spare parts (Details as per Section 17, clause no. 17.8 of Vol.3B).
Tools and instruments (as per Section 17, clause no. 17.9 of Vol.3B).
ELECTRIC OVERHEAD TRAVELLING (EOT) CRANES
190/30/10 T EOT cranes for Power House along with equalizer beam for tandem operation complete with all accessories as per specifications and scope defined in Section 18 of Vol.3 B.
Electrical Overhead Traveling crane for MIV Cavern (Capacity 90 MT/10 MT) with all accessories as per specifications and scope defined in Section 18 of Vol.3B.
Electrical Overhead Traveling crane for Transformer Hall (Capacity 80 MT/20 MT) with all accessories as per specifications and scope defined in Section 18 of Vol.3B.
Specified Spare parts (Details as per Section 18, clause no. 18.8 of Vol.3B).
Tools and instruments (Details as per Section 18 , clause no. 18.9 of Vol.3B).
COOLING WATER SYSTEM
Close loop Cooling Water System and other accessories as per specifications and scope defined in Section 19 of Vol.3B.
Specified Spare parts (Details as per Section 19, clause no. 19.8 of Vol.3B)
Tools and instruments (Details as per Section 19, clause no. 19.9 of Vol.3B).
DRAINAGE AND DEWATERING SYSTEM
Drainage Water System complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
Dewatering system complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
Flood Dewatering system complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
Specified Spare parts (Details as per Section 20, clause no. 20.8 of Vol.3B).
Tools and instruments (as per Section 20, clause no. 20.9 of Vol.3B).
HEATING, VENTILATION AND AIR CONDITIONING SYSTEM (HVAC)
Heating, Ventilation and Air conditioning System complete with all accessories and controls as per specifications and scope defined in Section 21 of Vol.3B.
Specified Spare parts (Details as per Section 21, clause no. 21.10 of Vol.3B).
Tools and instruments (as per Section 21, clause no. 21.11 of Vol.3B).
GROUNDING SYSTEM
Grounding System for Power house complex, Control block cavern, Transformer cum draft tube gate cavern, GIS cavern, tailrace area, draft tube area and adjoining functional areas etc. complete with all accessories as per specifications and scope defined in Section 22 of Vol.3B.
Specified Spare parts (Details as per Section 22, clause no. 22.8 of Vol.3B).
Tools and instruments (Details as per Section 22, clause no. 22.9 of Vol.3B).
COMPRESSED AIR SYSTEMS
Low pressure compressed air system as per specifications and scope defined in Section 23 of Vol.3B
LP/HP compressed air system for blow down compressed air system for synchronous condenser mode operation as per specifications and scope defined in Section 23 of Vol.3B.
Specified Spare parts (Details as per Section 23, clause no. 23.8 of Vol.3B).
Tools and instruments (Details as per Section 23, clause no. 23.9 of Vol.3B).
FIRE FIGHTING SYSTEM
Fire Fighting System as per specifications and scope defined in Section 24 of Vol.3B.
Specified Spare parts (Details as per Section 24, clause no. 24.8 of Vol.3B).
Tools and instruments (Details as per Section 24 , clause no. 24.9 of Vol.3B).
OIL HANDLING SYSTEM
Insulating oil handling systems as per specifications and scope defined in Section 25 of Vol.3B.
Lubricating oil handling systems as per specifications and scope defined in Section 325 of Vol.3B.
Specified Spare parts (Details as per Section 25, clause no. 25.8 of Vol.3B)
Tools and instruments (as per Section 25, clause no. 25.9 of Vol.3B).
MECHANICAL WORKSHOP
Mechanical workshop as per specifications and scope defined in Section 26 of Vol.3B.
Specified Spare parts (Details as per Section 26, clause no. 26.8 of Vol.3B).
Tools and instruments (as per Section 26, clause no. 26.9 of Vol.3B).
ELEVATOR
Elevator complete with all accessories as per specifications and scope defined in Section 27 of Vol.3B.
Specified Spare parts (Details as per Section 27 , clause no. 27.8 of Vol.3B).
Tools and instruments (as per Section 27, clause no. 27.9 of Vol.3B).
SECURITY AND SURVEILLANCE SYSTEM
Security and Surveillance System with its all accessories as per specifications and scope defined in Section 28 of Vol.3B.
Specified Spare parts (Details as per Section 28, clause no. 28.8 of Vol.3B).
Tools and instruments (as per Section 28, clause no. 28.9 of Vol.3B).
Item Rate BoQ
BoQ_Ver3.0
Tender Reference No: NH/Conts(E&M)-I/Dulhast-Stage-II/ENM/2026/01 Tender ID: 2026_NHPC_ 905459 _1
Name of the Bidder/ Bidding Firm / Company :
Price Schedule 3: Model Test & Installation Services (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
GENERAL TECHNICAL REQUIREMENTS
Training as specified at Section 1 in clause 1.10 of Vol.3B.
TURBINE AND ACCESSORIES
Vertical Shaft Francis Turbine which shall produce sufficient power (further 10% over load) at rated speed 187.5 rpm, rated head 135.1 m with 85% guide vane opening to generate 131.98 MW at 0.85 power factor at generator terminal, complete with all accessories, auxiliary equipment including model testing and field acceptance tests as per specifications and scope defined in Section 2 of Vol.3B.
Development of Turbine model, its testing, demonstration of Guranteed Particulars and submission of test reports as per specifications and scope defined in Section-2 of Vol.3 B (PTS)
DIGITAL GOVERNING SYSTEM AND ACCESSORIES
Digital Programmable Electronic type governor including oil-pumping units, pressure and sump tanks, allied valves and piping as per specifications and scope defined in Section 3 of Vol.3B.
MAIN INLET VALVE AND ACCESSORIES
Main Inlet Valve of Butterfly Valve type. including oil-pumping units, pressure and sump tanks, allied valves and piping as per specifications and scope defined in Section 4 of Vol.3B.
GENERATOR
130 MW rated capacity with further 10% overload capacity at 13.8kV and 0.85 power factor, 50 Hz synchronous generator, direct driven, vertical shaft, complete with thrust and guide bearings, upper and lower bracket, other components and auxiliaries as per specifications and scope defined in Section 5 of Vol.3B.
STATIC EXCITATION SYSTEM
Static Excitation system equipment complete with DVR, excitation transformer and other accessories as per specifications and scope defined in Section 6 of Vol.3B.
Power system stability studies as detailed in section 6 of vol. 3B
BUS DUCT
Bus duct, isolated type, CT, PT & SP along with all accessories and terminals cubicles and equipment as per specifications and scope defined in Section 7 of Vol.3B.
DC SYSTEM
220V battery System consisting of battery banks, battery chargers, UPS, 220 V and 48 V distribution boards of appropriate ratings, racks as per specifications and scope defined in Section 8 of Vol.3B.
CONTROL AND MONITORING (SCADA) SYSTEM
Control and Monitoring System including SCADA, Control boards, reliable computers, colour video display units, LSD, Control networks, Optical cable, printer units, operating keyboards, etc. as per specifications and scope defined in Section 9 of Vol.3B
Control room furniture as specified at Section 9 in clause 9.5.17 of Vol.3B
PROTECTION SYSTEM
Electrical Protection System for generating units, generator step-up transformer, bus-bar, reactor, 11kV switchgear , LV & MV Switchgear, XLPE cable, outgoing transmission lines etc. complete with all accessories, wiring and cubicles etc. as per specifications and scope defined in Section 10 of Vol.3B.
CABLING SYSTEM
Power, Control and instrumentation cables, cables trays, supporting structures, complete with cable terminals and all accessories as per specifications and scope defined in Section 11 of Vol.3B.
MV SWITCHGEAR & AUXILIARY TRANSFORMERS
11KV Switchgear along with all accessories as per specifications and scope defined Section 12 of Vol.3B.
Unit Tap-off Transformer (Dry Type, 13.8 / 11 kV, 4 MVA) associated with all accessories as per specifications and scope defined in Section 12 of Vol.3B.
DG SETS
1000 kVA, 11kV, 0.8 pf (lagging) silent DG Set complete with all accessories, fuel system, instrumentation and wiring as per specifications and scope defined in Section 13 of Vol.3B.
415V SWITCHGEAR AND AUXILIARY TRANSFORMERS
415V AC switchgear systems complete with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Unit Auxiliary Transformer (Dry Type 800 kVA, 11kV/0.415kV) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Station Service Transformer (Dry 2.5 MVA, 11kV/0.415kV) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 1000 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 500 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
Distribution Transformer (Rating 11 / 0.415 kV), 250 kVA, Dry type, 3-phase) associated with all accessories as per specifications and scope defined in Section 14 of Vol.3B.
ILLUMINATION SYSTEM
Illumination System complete with all accessories including distribution boards, switchboards, cables/wires, lighting fixtures etc. for power house complex, Transformer cavern, Control block cavern, GIS cavern, Pothead yard area, and outside area as per specifications and scope defined in Section 15 of Vol.3B.
COMMUNICATION SYSTEM
Public Address System and EPBAX System as per specifications and scope defined in Section 16 of Vol.3B.
Conferencing System for powerhouse as per specifications and scope defined in Section 16 of Vol.3B.
ELECTRICAL WORKSHOP
Electrical Workshop as per specifications and scope defined in Section 17 of Vol.3B.
ELECTRIC OVERHEAD TRAVELLING (EOT) CRANES
190/30/10 T EOT cranes for Power House along with equalizer beam for tandem operation complete with all accessories as per specifications and scope defined in Section 18 of Vol.3 B.
Electrical Overhead Traveling crane for MIV Cavern (Capacity 90 MT/10 MT) with all accessories as per specifications and scope defined in Section 18 of Vol.3B.
Electrical Overhead Traveling crane for Transformer Hall (Capacity 80 MT/20 MT) with all accessories as per specifications and scope defined in Section 18 of Vol.3B.
COOLING WATER SYSTEM
Close loop Cooling Water System and other accessories as per specifications and scope defined in Section 19 of Vol.3B.
DRAINAGE AND DEWATERING SYSTEM
Drainage Water System complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
Dewatering system complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
Flood Dewatering system complete with pumps, piping, valves, fittings, auto starting and stopping features and other accessories as per specifications and scope defined in Section 20 of Vol.3B.
HEATING, VENTILATION AND AIR CONDITIONING SYSTEM (HVAC)
Heating, Ventilation and Air conditioning System complete with all accessories and controls as per specifications and scope defined in Section 21 of Vol.3B.
GROUNDING SYSTEM
Grounding System for Power house complex, Control block cavern, Transformer cum draft tube gate cavern, GIS cavern, tailrace area, draft tube area and adjoining functional areas etc. complete with all accessories as per specifications and scope defined in Section 22 of Vol.3B.
COMPRESSED AIR SYSTEMS
Low pressure compressed air system as per specifications and scope defined in Section 23 of Vol.3B
LP/HP compressed air system for blow down compressed air system for synchronous condenser mode operation as per specifications and scope defined in Section 23 of Vol.3B.
FIRE FIGHTING SYSTEM
Fire Fighting System as per specifications and scope defined in Section 24 of Vol.3B.
OIL HANDLING SYSTEM
Insulating oil handling systems as per specifications and scope defined in Section 25 of Vol.3B.
Lubricating oil handling systems as per specifications and scope defined in Section 325 of Vol.3B.
MECHANICAL WORKSHOP
Mechanical workshop as per specifications and scope defined in Section 26 of Vol.3B.
ELEVATOR
Elevator complete with all accessories as per specifications and scope defined in Section 27 of Vol.3B.
SECURITY AND SURVEILLANCE SYSTEM
Security and Surveillance System with its all accessories as per specifications and scope defined in Section 28 of Vol.3B.
Item Wise BoQ
BoQ_Ver3.0
Tender Reference No: NH/Conts(E&M)-I/Dulhast-Stage-II/ENM/2026/01 Tender ID: 2026_NHPC_ 905459 _1
Name of the Bidder/ Bidding Firm / Company :
Price Schedule-4. Grand Summary (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Total of Price Schedule 1 : Plant, equipment , Specified spare parts & Tools and Instruments supplied from within the Employer’s country
Total of Price Schedule 2 : Local transportation including inland insurance.
Total of Price Schedule 3 : Model Test and Installation services
Please Enable Macros to View BoQ information
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.92 MB
BOQ_and_Price_Schedule_6_7_Att_6A_Att_6A_price_sch_6_7.pdf
Additional Documents • 0.60 MB
BOQ_and_Price_Schedule_6_7_Att_6A_BOQ_Lot-2_DulhastiPS_Final.xls
Additional Documents • 0.49 MB
Vol-IIIA-IIIB-IIIC-IIID.pdf
Tender Documents • 33.02 MB
Vol-IV-V.pdf
Tender Documents • 15.54 MB
Vol-0-I-IIA-IIB.pdf
Tender Documents • 21.53 MB
Download all tender documents and submit your bid