REPAIR TO WOODEN/ STEEL FURNITURE AND POLISHING AND PAINTING OF VARIOUS FURNITURE AT NHO AREA UNDER GE CLEMENT TOWN

Amount

ALMIRAH LARGE STEEL WITH SHELVES (FD-104/1031/FD/E6/MAP/18)

Removing of old unserviceable handles without damaging the adjacent parts and S & F new steel CP handle 125 mm long of approved quality complete all as specified and directed with bolts

Removing of old unserviceable locks without damaging the adjacent parts and S&F new MS lock of size 65 mm with duplicate stainless steel keys to almirah large steel complete all as directed and whown on drawing (Make : Godrej/Harrison) 6 lever.

Removing unserviceable locking device and S&F new three way locking device of 10 mm dia including MS Rod & brass shackles complete with fixing accessories complete all as shown in drawing and as specified and directed

Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

Taking out unserviceable broken legs & S&F new legs made out of 1 mm MS sheet suitable for almirah large steel & welded accordingly complete all as directed and shown on drg.

Taking out old unserviceable/damaged shelves and S&F new shelve made out of 1mm MS sheet bent to required shape properly in position complete all as directed

Taking out unserviceable shutters & Supply and fixing new Steel shutters made out of 1mm MS sheet Made to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS Screws complete all as directed.

M & L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint over a coat of red oxide primer by brush (1st grade quality, shade shall be approved by GE, complete all as specified and directed.

ALMIRAH MEDIUM/SMALL STEEL WITH SHELVES (FD-1032/243/67)

Removing of old unserviceable handles without damaging the adjacent parts and S & F new steel CP handle 125 mm long of approved quality complete all as specified and directed with bolts

Removing of old unserviceable locks without damaging the adjacent parts and S&F new MS lock of size 65 mm with duplicate stainless steel keys to almirah medium steel complete all as directed and whown on drawing (Make : Godrej) 6 lever.

Removing unserviceable locking device and S&F new three way locking device of 10 mm dia including MS Rod & brass shackles complete with fixing accessories complete all as shown in drawing and as specified and directed

Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

Taking out unserviceable broken legs & S&F new legs made out of 1 mm MS sheet suitable & welded accordingly complete all as directed and shown on drg.

Taking out old unserviceable/damaged shelves and S&F new shelve made out of 1mm MS sheet bent to required shape properly in position complete all as directed

Taking out unserviceable shutters & Supply and fixing new shutters made out of 1mm MS sheet Made to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS Screws complete all as directed.

M & L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint over a coat of red oxide primer by brush (1st grade quality, shade shall be approved by GE, complete all as specified and directed.

BED HARD (FD/E6/MAP/08(R))

Removing old u/s top and S&F new top of plywood (Make: Greenply/Century/Archidply) top 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood (Make: Greenply/Century/Archidply) mdae to shape & size as shwon on drawings, complete all as specified and directed by GE.

Removing old u/s headrest and S&F new headrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Archidply/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. all as directed by GE and shown on drawing.

Removing old u/s footrest and S&F new footrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Archidply/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. all as directed by GE and shown on drawing including dismatling of old unserviceable top without disturbing the othe parts.

M&L for spray painting two coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

CHARPOY WITH HARD TOP (FD-/MAP/II/01)

Removinf old u/s top and S&F plywood (Make: Greenply/Century/Archidply) top of size 1930X900MM, 12mm thick BWR Grade ISI Marked confirming to IS-303 of Charpoy with Hard top mdae to shape & size as shwon on drawings, complete all as specified and directed by GE. 12x6mm thick half round teak wood beading shall be provide alround the edges of plywood with suitable adhesive and headless nails.

M&L for spray painting two coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc indluding denting as required all as directed by GE.

CHAIR REVOLVING/CHAIR EXECUTIVE (FD/E6/MAP/01- (TP))

Seat & Back : Removing the existing old unserviceable seat and back from the chair and re-upholestering with new estry/Fabric/Leatherite Rexene cloth approved quality after providing cushion of 40mm 40density PU foam of Make:Sleepwell/Kurl On fixed over 12mm BWR plywood all as specified on drg and as directed by Engr in Charge.

Castor Wheel : Removing the existing unserviceable or broken castor wheel and S&F of New Castor wheel to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

Handle : Removing the existing broken/ unserviceable handle from the chair and S&F new handlemade out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

Bottom Base : Removing the existing unserviceable or worn out bottom base from the Chair. Supply and fix new Base to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

Gas lifting Hydraulic System : Removing the existing unserviceable Gas lifting Hydraulic System of various types from the Chair. Supply and fix new Gas lifting Hydraulic System to the chair in suitable pattern/model to match in original all as specified on drg and as directed by Engr in Charge.

TABLE BED SIDE (FD-276/FD-248/FD-277)

Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Century/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Replacement of old/us sides and S&F new sides made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Century/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us self and S&F new self made of 18/19mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Century/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us back ply and S&F new back ply made of 6mm thick plywood (Make: Greenply/Century /Archidply) of BWR Grade ISI Marked confirming to IS-303.

M&L for applying two coats of french polish on all exposed sufraces of table bed side including cleaning and preaparing the surface including a coat of wood filler on wooden surfaces.

SIDE BOARD (FD-241/1112)

Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Greenply/Century/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges complete all as specified and as shown in drg.

Replacement of old/us shutters and S&F new shutter made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Greenply/Century/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade laminated one side teak veneer natural finish and other side white with piano type hinges and 4 mm thick 1st class hard wood teak edging around with new CP knobs as approved by GE complete all as specified and as shown in drg. .

Replacement of old/us sides and S&F new sides made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Greenply/Century/ Action Tesa) one side laminated with teak veneer natural finish one side ISI marked confirming to IS-14587 Grade-I of shade as approved by GE completed all as specified and as shown in drg.

Replacement of old/us drawers and S&F new drawers made out of 19 mm thick MDF Board exterior quality & 4 mm thick 1st class hard wood teak edging around the new CP plated knobs all as specified and shown in drg. Provision of Telescopic channels of make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

Replacement of old/us handles and S&F new Chromium Plated handles(Approved by GE) of 100mm long fixed to shutters/drawers complete all as specified and as shown in drg.

Replacement of old/us shelves and S&F new shelves made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us back ply and S&F new back ply made of 6mm thick plywood (Make: Greenply/Century /Archidply) of 6 mm thick commercial plywood BWR Grade ISI Marked confirming to IS-303,

Replacement of old/us base support and S&F new Base support made of 1st class teak wood all as specified and shown in drg.

M&L for applying two coats of french polish on all exposed surfaces of side board including cleaning and preaparing the surface including a coat of wood filler on wooden surfaces complete all as specified and as directed.

HAT STAND WITH MIRROR (FD-233)

Replacement of old/us Mirror of Hat stand and S&F new mirror 5.5 mm thick as per drg. (Make: Modiguard/Atul/Saint Gobbain) complete all as specified and as directed.

Replacement of old/us pegs and S & F new copper oxidised steel pegs superior quality as approved by GE complete all as specified and as directed.

Replacement of old/us front sides ply and S&F new ply made of 4mm thick face plywood (Make: Greenply/Century /Archidply) of BWR Grade ISI Marked confirming to IS-303 complete all as specified and as directed.

Replacement of old/us back ply and S&F new ply made of 6mm thick plywood (Make: Greenply/Century /Archidply) of BWR Grade ISI Marked confirming to IS-303 complete all as specified and as directed.

Replacement of old/us wooden frame and S&F new wooden frame all as specified and shown in drg complete all as specified and as directed.

M&L for applying two or more coats of french polish on all exposed surfaces of hat stand with mirror including cleaning and preparing the surface including a coat of wood filler on wooden surface as well as on teak face ply complete all as specified and as directed.

TABLE DRESSING LADIES WITH MIRROR (FD-378/251/FD/MAP-II/07)

Replacement of old/us Mirror of Table dressing ladies and S&F new Mirror 5 mm thick as per drg (as per sample) completed all as specified and shown in drg (Make: Modiguard/Atul/Saint Gobbain/Swastik) including back side covered with 6 mm plywood and BWR Grade commercial with teak wood edging around the mirror

Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges complete all as specified and shows in drg complete all as specified and as directed.

Replacement of old/us drawers with new drawers made out of 18/19 mm thick MDF board exterior grade with 4 mm thick 1st class hard wood teak edging around the new CP Knobs and provision of Telescopic channels of make Godrej/Hettich as guide rail for smooth sliding of drawers complete all as specified and shown in drg.

Replacement of old/us Bottom and S&F new Bottom made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us sides and S&F new sides made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us Sliding plain glass and new Sliding plain glass shutters 5 mm thick with two way aluminium channel as specified and shown in drg

Replacement of old/us base support and S&F new Base support made of 1st class teak wood all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed surfaces of table dressing ladies including cleaning and preparing the surface including a coat of wood filler on wooden surfaces complete all as specified and as directed.

TEAPOY WOODEN (FD-278/382)

Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges complete all as specified and as directed.

Replacement of old/us legs support and S&F new leg made of 1st class teak wood duly polished all as specified and shown in drg.

Replacement of old/us short rails support and S&F new short rails made of 1st class teak wood duly polished all as specified and shown in drg.

Replacement of old/us long rails support and S&F new long rails made of 1st class teak wood duly polished all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed surfaces of Teapoy wooden including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE PEG (FD-384/FD-277)

Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 4 mm half round teak wood beading with fevicol and headless nails all round the edges complete all as specified and shown in drg complete all as specified and as directed.

Replacement of old/us legs support and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails support and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails support and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed surfaces of Peg Table including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE CENTRE (FD-274 , FD-235)

Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges complete all as specified and shown in drg.

Replacement of old/us legs support and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails support and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails support and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed surfaces of table center including cleaning and preparing the surface including a coat of wood filler on wooden surfaces complete all as specified and as directed.

BED PLYWOOD (FD-246, 245,247,21)

Replacement of old/us plywood top and S&F new plywood top made of 12 mm thick Plywood (Make: Greenply/Century /Archidply) of BWR Grade ISI Marked confirming to IS-303 complete all as specified and shown in drg.

Replacement of old/us long rails support and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails support and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us legs support and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Head Board and S&F new Head Board made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Foot Board and S&F new Foot Board made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Stiffeners support and S&F new stiffeners made of 2nd class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

Replacement of old/us Steel bent clamp for corner and S & F new Steel bent clamp for corner all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed surfaces of Bed Plywood including cleaning and preparing the surface including a coat of wood filler on wooden surfaces complete all as specified and as directed.

SOFA SET 5 SEATER (FD/MAP-II/02/FD-281)

Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Front legs support and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us front or Back Plywood of 3 seater and S&F new front or Back Plywood made of 12mm thick plywood (Make: Greenply/Century /Archidply) of BWR Grade ISI Marked confirming to IS-303 complete all as specified and shown in drg.

Replacement of old/us Stiffeners support and S&F new stiffeners made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Back strip and S&F new Back strip made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

Replacement of unserviceable cushion for seat/back with new cushion of sofa set 4/5 Seater comprising single piece of seat/back each made of foam 40D of size 21”X22”X100 mm Make: Sleep Well (Featherfoam)/ Kurlon(Gold) duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21" side) of make YKK with two runners at both ends superior quality complete all as directed by GE and shown on drg no. Note : Rate of tapestry cloth shall not be less than Rs 550/-per RM and colour and texture of Tapestry shall be approved by GE.

M&L for applying two or more coats of french polish on all exposed surfaces of sofa set 5 seater including cleaning and preparing the surface including a coat of wood filler on wooden surfaces complete all as specified and as directed.

Chair Dining (FD-279,250,228,16)

Rear Legs : Taking down old u/s Rear Leg and M&L for New leg made out of 1st class teak wood duly polished all as specified in drg and as directed by Engr-in-Charge.

Front Legs : Taking down old u/s Front Leg and M&L for New leg made out of 1st class teak wood duly polished all as specified in drg and as directed by Engr-in-Charge.

Side Rail : Taking down old u/s Side Rail and M&L for New Side Rail made out of 1st class teak wood duly polished all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail : Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of 1st class teak wood duly polished all as specified in drg and as directed by Engr-in-Charge.

Bottom Stiffener : Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of 1st class teak wood duly polished all as specified in drg and as directed by Engr-in-Chg.

Back Strip : Taking down old u/s Back Strip and M&L for New leg made out of 1st class teak wood duly polished all as specified in drg and as directed by Engr-in-Charge.

Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Eng - in - Charge

Re-canning : Re- canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the GE

Polishing : Polishing two coats to new and old surfaces of Chair Dining after repair with french polish of approved quality including preparation of all surfaces .

Chair Easy (FD-229,201,17)

Rear Legs : Taking down old u/s Rear leg and M&L for new leg made out of 1st class teak wood all as speicified in drg and directed by Engr-in-Charge.

Front Legs : Taking down old u/s Front Leg and M&L for New leg made out of 1st class teak wood complete all as specified in drg and as directed by Engr-in-Charge.

Side Rail of seat : Taking down old u/s Side Rail and M&L for New Side Rails of seat made out of 1st class teak wood compleat all as specified in drg and as directed by Engr-in-Charge.

Front or Back Rail of seat: Taking down old u/s Front or Back Rails of seat and M&L for New Front/Back Rail of seat made out of 1st class teak wood complete all as specified in drg and as directed by Engr-in-Charge.

Side Rail Back : Taking down old u/s side Rail Back and M&L for New side Rail back made out of 1st class teak wood complete all as specified in drg and as directed by Engr-in-Charge.

Top/Bottom Rail of Back : Taking down old u/s Top/Bottom Rail Back and M&L for New Top/Bottom Rail of back made out of 1st class teak wood all as specified in drg and as directed by Engr-in-Charge.

Front Support Rail : Taking down old u/s Front Support Rail and M&L for New Front Support Rail made out of 1st class teak wood all complete all as specified in drg and as directed by Engr-in-Charge.

Shoes : M & L for removing old/worn out rubber shoes S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as specified and as directed.

Arms Rest : Taking down old u/s Arms Rest and M&L for New Arm rest made out of 1st class teak wood complete all as specified in drg and as directed by Engr-in-Charge.

M & L for re-canning of seat Chair easy in Godrej pattern oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Eng - in - Charge.

Re-canning Back: M & L for re-canning of back Chair easy in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Eng - in - Charge.

M& L for Polishing two coats to new and old surfaces of Chair easy after repair with french polish of approved quality including preparation of all surfaces complete all as specified and as directed.

Chair Verandah (FD-256,359)

Welding to broken steel frame of chair varandah by welding complete all as directed

Taking down old unserviceable cane and Re- -canning of Chair Verandah with oval shape 4mm wide new plastic cane make as approved by GE- Rest all as shown on drawing and as directed by the GE

Taking down old us shoe and S&F rubber/PVC shoes to leg of chair varandah all as specified.

M&L for spray painting two coats of synthetic enaml white paint over a coat of red oxide primer complete ater prepartion of surface by scrapping and removing dust dirt etc including denting as required all as directed by GE.

TABLE DINING 6/8 PERSONS (FD-276,273,30(M))

Replacement of old/us top and S&F new top for table dining 8 persons, made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Century/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Replacement of old/us top and S&F new top for table dining 6 persons made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Century/ Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Replacement of old/us legs support and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails support and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails support and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us Stiffeners support and S&F new stiffeners made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us corner cleat and S&F new corner cleat all as specified and shown in drg.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed sufraces of table dining 6/8 persons including cleaning and preparing the surface including a coat of wood filler on wooden surfaces.

TABLE DRESSING GENTS WITH MIRROR (FD/E6/MAP/16, FD-230)

Replacement of old/us Mirror of Table dressing gents and S & F new Mirror 5 mm( as per sample) thick as per drg including back side covered with 6 mm plywood BWR grade commercial with teak wood edging around of mirror. Complete all as specified and shown in drg ( Make: Modiguard/Atul/Saint Gobbain/Swastik)

Replacement of old/us top and S & F new top made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE complete all as specified and shown in drg complete all as specified and as directed.

Replacement of old/us drawers and S&F new drawers made out of 18/19 mm thick MDF board exterior grade with 4 mm thick 1st class hard wood teak edging around new CP Knobs all as specified and shown in drg. Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

Replacement of old/us Bottom and S&F new Bottom made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

Replacement of old/us sides and S&F new sides made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE.

M&L for applying two or more coats of french polish on all exposed surfaces of table dressing gents including cleaning and preparing the surface including a coat of wood filler on wooden surfaces complete all as specified and as directed.

STOOL DRESSING (FD-252/FD-282)

Replacement of old/us legs and S&F new legs made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Removing existing stool dressing and weaving with and including new cane 2 mm wide half round and 4 mm wide on borders and S & F new PVC/ hard rubber shoes of superior quality complete all as directed.

M&L for applying two coats of french polish on all exposed surfaces of stool dressing including cleaning and preaparing the surface including a coat of wood filler on wooden surfaces complete all as specified and as directed.

TEAPOY VERANDAH (FD/E6/MAP/17/FD-383)

Taking out unserviceable legs and S&F new legs of existing shape and size as required duly welded to all the places as per drawing.

Removing old u/s top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M & L for welding to broken steel frame teapoy verandah

Removing M&L for spray painting one coats of syntetic enamel paint (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface by scrapping and removing dust dirt etc including denting as required all as specified and directed by Engr-in Charge.

TABLE WRITING (FD-275, FD-33)

Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior Grade (Make: Greenply/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with 4 mm half round teak wood beading with fevicol and headless nails all round the edges complete all as specified and shown in drg.

Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us long rails and S&F new long rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us short rails and S&F new short rails made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us back ply and S&F new ply made of 6mm thick plywood (Make: Greenply/Century /Archidply) of BWR Grade ISI Marked confirming to IS-303.

Replacement of old/us Stiffeners support and S&F new stiffeners made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us drawers and S&F new drawers all as specified and shown in drg including 4 mm thick 1st class hard wood teak edging with new CP Knobs Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

Replacement of old/us lock of drawers and S & F new brass lock 6 lever 50 mm all as per drg complete.

Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

M&L for applying two or more coats of french polish on all exposed surfaces of Table writing including cleaning and preparing the surface including a coat of wood filler on wooden surfaces complete all as specified and as directed.

RACK STEEL (ANY TYPES) (FD-1039 & TP)

Shelf : M&L for removing old worn out Shelf from the Rack Steel (Any Types) and Supply and fixing of new shelf made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge.

Angle Iron : M&L for removing old worn out angle iron from the Rack Steel (Any Types) and Supply and fixing of new slotted angle iron of of required size and length with suitable nuts and bolts . Rest all as specified on drg and as directed by Engr in Charge.

Side : M&L for removing old worn out sides from the Rack Steel (Any Types)and Supply and fixing of new Sides made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge.

Back : M&L for removing old worn out back from the Rack Steel (Any Types) and Supply and fixing of new back made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge.

M & L for welding to broken steel frame of Rack Steel (Any Type)

M&L for preparation of old painted iron & steel surfaces of rack steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting two coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE ) over a coat of red oxide primer complete after preparation of surface all as specified and directed by Engr-in Charge.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

Meher enterprises (BID ID -3122543)

VARAROHA BUILDERS (BID ID -3120129)

avtarsinghchaddha (BID ID -3118209)