Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC VILLAGE GOROIMARI PO SHALONIBAIR DIST SONITPUR ASSAM PIN 784104 | SONITPUR | ASSAM | 784104 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹24.6 L+₹92,054.78 (3.89%)Rejected-Finance | L2 | Rejected-Finance BecomeL2 | |
| 3 | L3₹25.5 L+₹1.8 L (7.73%)Rejected-Finance | L3 | Rejected-Finance BecomeL3 | |
| 4 | L5₹25.8 L+₹2.1 L (8.69%)Rejected-Finance 2ND FLOOR SC ROAD SANTA PLAZA TEZPUR DISTT SONITPUR ASSAM PIN 784001 | SONITPUR | ASSAM | 784001 | L5 | Rejected-Finance BecomeL5 |
Tender Value
₹27.5 L
EMD Value
₹55,100
Closing Date
17 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MISSION CHARALI
GE SOUTH TEZPUR, Missaion Charali
PROVN OF CERTAIN SANCTION WORKS (PHASE-IV) UNDER GE (S) TEZPUR
2023_MES_604320_1
8769
Open Tender
Civil Works
Item Rate
210 days
GE SOUTH TEZPUR
AS PER NIT
4 documents required · 4 mandatory
₹500
GE SOUTH TEZPUR
₹55,100
Yes
26 Jul 2023
19 Jun 2023
20 Jul 2023
19 Jun 2023
17 Jul 2023
3 Jul 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises all as directed.
M&L Vitrified Ceramic tiles of any patter and shade 10 mm thick (square/ rectangular) glazed polished premium quality, area of each tiles exceeding 0.70 sqm but not exceeding 1.00 sqm, in floors etc. Set and jointed in neat cement slurry and pointed epoxy filler to match the shade over 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 1.00 sqm, in dado /skirting etc. set and jointed in neat cement slurry and pointed epoxy filler to match the shade over 15mm thick screed bed in CM 1:4. Complete all as specified and directed.
M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match the shade over 15mm thick screed bed in CM 1:6 all as specified and directed.
All as per item No 04 above but in skirting over 10mm thick screeding in cement mortar 1:4 all as specified and directed
Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand. Complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. Complete all as specified and directed.
M/L PCC 1:2:4 type B1 using 20mm grade aggregate as in coping, levelling course or similar work .Complete all as specified and directed.
M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick in sub base complete all as specified and as directed.
M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr and every corner and filled with bituminous filler complete all as specified and as directed.
M&L 75 mm thick PCC 1:2:4 type B2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with bitumen and sand in ratio of 1:3) at 3 mtr and where required complete all as specified and as directed.
M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:4) having compressive strength not less than 75 kg/Sq cm all as specified and directed.
Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar ( 1:6) all as specified and directed.
M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.
M&L 10mm thick rendering in cm (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement. Complete all as specified and directed.
M&L for preparation of old wooden surface of any description and applying one coat of french polish. Complete all as specified and directed.
M&L for Newly plastered surfaces of external wall and applying two coat of apex /weather coat paints over a coats of dam proof primer over a coat of 1 mm thick wall care putty by smart painting method. Complete all as specified and directed.
M&L Applying two coats of Acrylic Emulsion distemper to old plastered surface of wall over a coat of 1 mm layer wall care putty over a coat of wall primer including complete removal of existing treatment by application of distempering by smart painting method. Complete all as specified and directed.
M&L preparation and cleaning of existing painted wall surfaces and applying one coats of Acrylic exterior paint (Anti fungal) paint including properly fillings the cracks with 1 mm thick wall care putty application of distemper by smart painting method. complete all as specified and directed
S&F Perforated particle board/ tiles for insula-tion and acoustic purposes in ceiling, flat or sloping, 60x60 cm in size 25 mm thick, fixed with screws to snap grid complete all as specified and directed
S&F Gl powder coated frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 4 mm thick e board and two coats acrylic distemper over be copat of primer etc complete all as specified and directed
S&F 6-10 mm thick PVC hollow panels with to 1.00 mm thick wall thickness plain PVC sheet suitably placed in Wall/ ceiling including same and matching colour wall angle , u clip, end elip and jointer as in ceiling and walls including GI 0.50mm thick GI "C" channel @ 600 to 800mm c/c horizontally/ vertically and at every corner As per specification and drawing all as specified and directed
Supply and fix PVC pre laminated particle board 18 mm thick, exterior grade, fixed with screws complete all as specified and directed
Refixing of shutters of any description exc 1.00 Sqm and exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.complete all as specified and directed
Supply and fix of stainless steel handles fancy type 128 mm size complete all as specified and directed.
Supply and fix magnetic catch suitable for cabinets and shelves, fixed with screws Make : Kaizon or equivalent. Complete all as specified and directed.
Supply and fix 30mm width of flaps (when open) continuous (piano) hinges stainless steel, bright finish or electroglvanised complete all as specified and directed.
S&F 150mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete as specified and directed.
S&F 150mm long brass handles, cast type, polished bright complete all as specified and directed.
S&F 100mm long butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed
S&F 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed
Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.
S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction. Complete all as specified and directed.
S&F Anodised aluminium frame for doors, windows, Partician, ventilators two/ three track with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane frosted one side all as specified and directed by Engr-in-Charge
All as per item No. 35 above but using 4-5 mm thick ACP board
Surface excavation exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out. Complete all as specified and directed.
Excavation in trenches n. exc 1.5 metre wide and not exceeding 1.5 metre in depth; for foundations etc or for shafts, wells, cesspits, manholes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified & directed by Engineer-in-charge .
Excavation in post holes each exc 0.5Cum getting out in soft loose soils, returning filling in and ramming earth or broken rubble mixed with earth around in layers exc 25 cm and removing surplus soil to ad distance exc 50m and making good surface. Complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed by Engineer-in-charge.
Removal of excavated surplus spoil to a distance exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .
M & L for Hardcore of guage n exe. 63 mm size of crushed stone deposited spread and levelled in layers n exe 15 CM thick watered and rammed to a true surface.by smart painting method. Complete all as specified and directed.
Dismantling fencing wire mesh, any type and any size.by smart painting method. Complete all as specified and directed.
Dismantling posts or struts Posts embedded in natural ground (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground .by smart painting method. Complete all as specified and directed.
M&L for cement concrete type D-2 1:4:8 using 40mm graded stone aggregate in filling foundations and mass concrete complete all as specified.
M&L cement concrete 1:3:6 type C2 ( using 40 mm graded stone aggregate) as filling, levelling course and mass concrete complete all as specified and as directed.
M&L for RCC M-25 (Design Mix) (20mm graded aggregate)as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, undreamed pliles and mass concrete. Complete all as specified and directed.
M&L for RCC M-25 (Design Mix) using 20mm graded aggregate as columns pillars, piers posts and struts complete all as specified.
M&L for RCC M-25 (Design Mix) (20 mm graded stone aggregate) in RCC lintel, band etc complete all as specified and directed..
M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits of foundation and plinth beams, and similar work , vertical or batter, rough finished surface of concrete complete as specified.
M&L for form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs and similar works for rough finished surface of concrete complete as specified.
M&L for form work to sides of columns, posts, pillars etc for fair finished surface of concrete .complete all as specified and directed
S&F TMT mild steel deformed or twisted bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No 52 above but 6 to 8mm dia as in stirrups spacers and binders
S & F louvers /Precast RCC Jalli, 35mm thick (measured solid) including all moulding in PCC 1:2:4 type B0 (using 12.5 graded aggregate) set in cement mortar 1:4 complete all as specified
Supply & Fix framed works such as grills grating etc with ends of bars shouldered and for riveted in forged into spikes, framed guard bars, railing and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed
S&F steel work in tubular truss & vertical post of different size bend to shape, cut to length etc, including necessary welding, special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.
S&F rolled sections as in main cress beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or connecting plates confirming to Fe-410-w (Gde-E250) quality-Incomplete all as specified and directed.
S&F for MS plates as in cleats, base plates, purline etc of Gde Fe-410-W(gde-E-250).complete all as specified and directed
S&F Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long.complete all as specified and directed.
M&L for two coats of synthetic enamel paint over one coat of red oxide on steel surfaces next. 10cm width or girth incl. preparation of new surfaces. Complete all as specified and directed.
S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge, gutter etc fixed with self tapping screws as specified.
M & L for Point wiring for one light point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn through and existing non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed with and including modular metal flush box and Modular white Cover Plate with Frame for fixing switches, sockets, including one run of 1.5 sqmm FRLS PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required (as per the existing condition) all as specified and directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. Note:- 1. Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate. 2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate.
All as per item No. 62 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable.
All as per item No.62 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable
All as per item No. 62 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable
All as per item No. 62 here - in - before but for 5 Amps socket point on the same board controlled by one switch.
M & L for point wiring for one light point/Fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through and including PVC casing capping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as modular switches, sockets and regulators including with Modular PVC flush box and Modular White Cover plate with frame all as specified and directed.
All as per item No. 67 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable.
All as per item No. 67 here-in- before but with 2.5 sqmm cable for 15 Amps switch socket combination on independent board with 1.5 sq mm copper cable.
S&F modular switch flush type, 6 Amp, one way ,1 module all as directed specified. Make : legrand / grabtre/ Vision Panasonic
S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified. make : legrand / grabtre/ Vision Panasonic
S&F modular switch, 16 Amp flush type 1 module all as directed/ specified. make : legrand / grabtre/ Vision Panasonic
Supply and fix in replacement of Modular Socket 16A - 5 pin combined 2 module. Complete all as specified and directed make : legrand / grabtre/ Vision Panasonic
S&F modular Fan Regulator stepped type 2 module ,120W all as directed/ specified.
S&F ceiling rose surface backelite three terminals complete all as Specified and directed.
Supply Recess mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type Armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, all as specified and as directed.
S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incoming end. complete all as specified and directed
S & F MCB 'C' series Single pole and neutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed
S & F MCB 'C' series single pole and neutral 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed
S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed
S&F metal clad socket out let with MCB single pole and neutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified.
Supply and fixing 1200 mm BLDC 5 star rated ceiling fan with regulator enable motor with Power Input of 27 Watt with 10% tolerance, Motor Insulation "B" 220-240 V 50Hz, Single Phase A.C. Speed 350, Min air Delivery 210 CFM with complete set of 3 nos. blades, down rods, 2 nos canopies, shackle kit and all remaining accessories including nut bolts, washers complete as required the existing hook all as specified and directed. Make: Havells cat No. Efficiencia Neo BLDC (Without Remote) or equivalent make in Usha/Bajaj/Phillips/ Crompton
Supply and fix in replacement of Circuit/Sub Main Wiring with 2x6.0 Sqmm PVC insulated, FR, copper cable 1100 volts grade stranded copper conductor cable drawn through and non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed including with all fittings and accessories and 1X6.0 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly.
Supply and fix in replacement of Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FR, copper cable 1100 volts grade stranded copper conductor cable drawn through and non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed including with all fittings and accessories and 1X4.0 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly.
Supply & fix in replacement purpose surface and wall mounted LED batten 20 W 4ft with polycarbonate housing & integrated electronic driver. Make: Havells cat no.LHEXBLP7PN1W020 or equivalent make of Bajaj/Philips/surya/Jaquar
Supply & fix in replacement purpose surface and wall mounted LED batten 10 W 2ft with polycarbonate housing & integrated electronic driver. Make: Havells cat no.LHEXBLP7PN1W010 or equivalent make of Bajaj/Philips/surya/Jaquar
Supply and fixing in replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with GI Pipe 40 mm dia bracket made out 120 degree in shape with 2 No GI strip clamps, nut bolts and washers all as directed. Make: Havells/Bajaj/Philips/Jaquar
M/L for in replacement Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to Earthing test point all as specified or indicated including testing on completion all as specified or indicated including excavation and earth work and testing on completion including taking down old unsv Earthing all as directed
Supply and install hi wall Inverter 5 Star split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity 1.5 Ton all as directed. Make:- LG Cat No.RS-Q19ENZE.ANLG or equivalent LG/Blue Star/Daikin/Hitachi
S&F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250V without but voltage stabilizer at 230V with all accuracy of +/-2.5% and capacity of 5.0 KVA all as specified and directed by Engg-in-charge Make : V-Guard/Votamp/AE/Aplab/Servo
S & F exposed GI powder coated snap grid frame for false ceiling 600 x 600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x24mmx0.55mm with using 3mm dia single GI adjustable suspender including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss any type of steel work to MS suspenders, completed all as specified and directed.
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp all as directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
Chinmay Traders
DRISTEE ASSOCIATES
AVASANA SOLUTIONS PRIVATE LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .