E.T.No.-EDC(USN)66/2025-26

Annexure -A ( Works )

Earth filling under floor and in sub-station area including cost of earth. Earth to be obtained from outside the corporation area including its cartage and ramming, watering, dressing in 20 cm's thick layers including cost of earth with all lead and lift etc.

Excavation in Soil in River Bed by Mechanical means i.e. backhole loader.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &lifts, all complete as per direction of Engineer-in-charge.

Cleaning, Dressing and labling of Switch yard and carry out from yard to out side.

Earth Work in Excavation of Trench by Mechnical means/ manual means over areas CC/Hardrock.

Providing and Laying in position specified grade of Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All works upto plinth level (I) 1:1.5:3 (1-Cement; 1.5-Coarse sand and 3-Graded Stone agrregate 20 MM nominal size) (For Road Repairing/Other work).

Brick work with common burnt clap bricks with cement mortar 1:4.

Cement Plaster work as per direction of Engineer in charge.

Plinth of Power T/F 2X2X1.5 MTR as per direction of Engineer in Charge.

Fabrication of MS Channel Angle Iron etc. for making T/F Base, in requried sizes with drilling of holes upto good finish of top channel, bracing and special type bracket etc as per RESPO schedule as per direction of Engineer in charge.

Jointing and fixing of cable jointing kit indoor/outdoor 33 KV XLPE heat shrinkable cable boxes

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 21-50 Km)

Dismantalling of Power T/F 12.5/10 MVA at transformer plinth & dismantling of all accessories i.e. radiators, conservator tank, vent pipe etc., with the help of special type of T&P/crane etc. fitting cable etc. and draning of t/f oil from radiator and conservator filling in drums

Shifting of 12.5 MVA Power Transformer from road site to work site / store center to loading site place with the manual pulling.

Erection of (12.5, 10) MVA T/F at transformer plinth & erection of all accessories i.e. radiators, conservator tank, vent pipee etc. , with the help of special type of T&P/crane etc. fitting cable etc. and refilling the fresh oil in radiator and conservator.

Erection charges of structure as per Direction of Engineer in charge.

Erection of 33 KV VACCUM CIRCUIT Breaker in all respect, making connection including testing and commissioning.

Service of Hydra Machine for Lines & Transformer related work because of busy traffic in Town area for safety purpose.

Dismantle of Exiting TPMO/GO Switch/Isolator as per Direction of Engineer in charge.

Earth strip - 50x6 for earthing of CSS / Feeder pannels .

Testing of Fire Extinguisher thorough checking of fire Extinguisher systems by suitable means. (ABC Type and Bucket sand type)

Dismantaling & Rejumpering of conductor as per Direction of Engineer in charge.

Laying of Control cable of all sizes through trench, proper connection at both ends outside in switchyard equipments & inside control room in VCB, control & relay Panels with proper marking, lugs , labelling & ferrules etc.

Dismantling of damage old 33KV LA as per direction of Engineer in charge.

Re-fixing of pale fencing by electric welding after work

Earthing with copper plate, charcoal, salt digging with duly provided 1 no cast copper plate.

Complete Testing Wiring as per direction of Engineer in charge.

Laying Earth Mate with Earthing Rod & GI strip as per direction of Engineer in charge.

Fixing and Erection of Capacitor Bank as per Direction of Engineer in Charge.

Filling of Fresh oil in Power T/F

Supply and Fixing of Oil Temperature and Winding Temperature Meter of Reputed Make.

Repairing and Replacing of HV side clamp as per direction of Engineer in charge.

Repairing and Replacing of LV side clamp as per direction of Engineer in charge.

Painting of yard Isolator/LA/CT/ Structure complete.

33KV Breaker overhauling & setting as per direction of Engineer in charge.

Annexure - B ( Supply ) (As per UPCL Norms)

Supply of CT Clamp

Supply of 33 KV Isolator Conn. Clamp for Panther with N&B

Supply of Cable Connector for 10 MVA & 12.5 MVA

Supply of Bolts & Nuts off size

Supply of PG Clamp for Panther

Supply of 33 KV HS Cable END T/K 3x400 SqMM O/D

Supply of 33 KV Isolator Blade Copper Made.

Supply of PVC wire 2.5 Sq.MM

Supply of Control Cable of size 16x2.5Sq.MM

Supply of 33 KV Isolator Jaw 1200 Amp.

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer (Sintex make or other ISI mark reputed company ) with Panel Lock with key)

Supply of G.I. Strip 40x6 mm.

Please Enable Macros to View BoQ information