Special Repairs to Toilets in Cheetah and Daredevil Squadrons (Phase-II) at INA Ezhimala

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Demoltion of cememnt concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each

Taking down shutters of any description n.exc 1 sqm each

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each but without taking off shutters from the frames

Taking down chowkats or frames n.exc. 1.5 Sqm each but without taking off shutters from the frames

Taking down aluminium shutter exc 1 Sqm and n.exc 2 Sqm each (without taking out frame) refixing in same position including repair and adjusting complete all as specified and as directed.

Taking up or down steel tubing and connections, 15mm dia complete

Taking up or down steel tubing and connections, 20mm dia complete

Taking up or down cast iron waste and vent pipes of any dia complete.

NOTES FOR ITEM NO 01 TO 10 :- Debris generated from demolition of toilets, WC, plumbing, joinery etc shall be removed by head load from the work site to the Exit/ Entrance of the Squadrons . Contractor should visit the site before quoting to understand the woking condition. Contractor's quoted rate shall be inclusive of the above and no extra claim shall be entertain on this account.

S&F 30 mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm.

S&F fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighining an average of 4 kgs per mtr.

S & F powder coated aluminium window and ventilator shutters side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F, powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beaking screws etc complete all as specified

M&L 4mm thick sheet glass ordinary quality not exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified.

S&F in repair aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / aluminum frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as directed.

S&F 100mm stainless steel butt hinges, cold rolled medium weight

S&F 150mm Aluminum anodised barrel tower bolts of extruded section

S&F 100mm extruded aluminium anodised alloy handles fabricated type

S&F 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy.

M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20 mm thick screed bed in CM 1:6 all as specified.

Material and labour for Glazed ceramic coloured tiles in vertical surfaces exc 0.08sqm and n exc 0.16sqm, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 15mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed.

M&L machine cut granite stone slab 20mm thick of approved colour and shade as in steps, jambs, pillars, window- cills, cooking platforms,WHB platform and like over and including 15mm thick backing coat in CM 1:4; laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified.

Rounding to edges of stone slabs to one edge, such as in steps and other similar situations

Cutting holes, square or circular or in oval shape of area exc. 0.20 and n exc 0.3) Sqm on granite slab for fixing of wash basin complete all as directed.

M&L for Precast RCC 1:2:4, type B-1 (using 20 mm graded stone agg) in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as directed.

M&L for MS framed brackets of angles or tees Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 all as specified and as directed.

M&L for mild steel TMT bars 8 mm dia bar cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

Supply and fix in repair vitreous china wash basin counter sunk type oval shape, star white including waste coupling chromium plated, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed. Make :- Hindware Cat No. 10049 or equivalent in Parryware/Cera

Supply and fix in repair vitreous china, wash down water closet (EWC) starwhite with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified. Make: HINDWARE, Cat. No 20079 or equivalent in Parryware/Cera.

S&F in repair vitreous China Urinal, half stall type, with and including waste coupling CP of 40 mm and all fixing acessories complete.Make: CERA/ HINDWARE/ PARRYWARE.

S&F in repair vitreous China Urinal partition, with and including all fixing acessories complete. Make:CERA/ HINDWARE/ PARRYWARE.

S&F pillar taps 15 mm size, brass chromium plated swan neck type screwed down high pressure screwed for iron pipe & fixed complete Make Jaquar Model No CON-CHR-127BKN or Equivalent in Roca/Essco/Marc

S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets. Make hindware/ Parry ware /Cera.

S & F in repairs Bib tap 15 mm size, brass chromium plated rust proof complete Make Jaquar Model No COS - 103037 or Equivalent

Supply and fix in repairs 15 MM DIA Angular stop valve, Brass chromium plated Make :- Jaquar Model No FLR - CHR-5053 N or equivalent in Roca/Essco/Marc

S&F in repair Brass CP wall mixer 15 mm dia bore for mixing hot and cold water screwed down for iron pipe and fixed all as specified and directed by Engineer-in-charge complete Make Jaquar Model No FLR-CHR-5219N or Equivalent in Roca/Essco/Marc.

S&F in repair Urinal spreader of brass chromium plated fancy type suitable for 15 mm bore pipe, Make Cera Model No F8070201 or Equivalent in hindware/ Parryware.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair Stainless steel towel rail 60 CM long, Make Jaquar Model No ACN-CHR-1111SM or equivalent in Roca/Essco/Marc

S&F in repairChromium plated towel ring round with round flange.Make Jaquar Model No ACN-CHR-1121 BN or equivalent in Roca/Essco/Marc

M&L for aluminium hat pegs solid body, 125mm to 175mm of 02 Nos fixed on 12 mm thick one side decorative laminated plywood grade 1(with BWR Resin), of area exc 0.05 sqm and n exc 0.10 Sqm each and fixing of wooden beading all around the ply wood all as specified and as directed by Engineer in Charge .

S&F in repair stainless steel soap dish of approved pattern all as specified and as directed Make Hindware or equivalent in in Parryware/Cera

S&F in repair CP Brass Shower rose with arm complete Make Make parry ware Model No T9809A1 or equivalent in Jaguar / Roca

S&F CP grating of 100 mm da including jointing with solvent cement all as specified and as directed

S & F in repairs 6 mm thick bevelled edge mirror of area exc 1 Sqm and n.exc 2 Sqm each mounted on 6mm thick PVC/AC building board/commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers all as specified and directed by Engineer-in-Charge

Supplying and laying of 15 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified and as directed.

Supplying and laying of 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old un serviceable pipes complete all as specified and as directed.

S & F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and as directed.

S & F PVC (SWR) pipes of 50 mm dia single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and as directed.

S & F PVC (SWR) bend of 50 mm dia .

S&F 110mm bore PVC SWR bend of 110 mm dia.

S&F 110mm bore PVC SWR bend with acces door complete all as specified

S&F 110mm bore PVC SWR branch piece single 'Y' equal or unequal

S & F in repair 110 mm PVC (SWR) floor trap plain including jointing with solvent cement.

S&F 110mm bore PVC SWR junction single (single T) equal or unequal

S&F 110 mm bore PVC SWR junction single tee with acces door complete all as specified and directed

S&F in repairChromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete. Make Jaguar model No ALD CHR 565 or equivalent in Roca/Essco/Marc

S&F in repair CP brass tioilet paper holder Make Jaguar Model No Can-1153N or equivalent in Roca/Essco/Marc

S&F in repair Aluminium Composite Panel 4mm thick of any colour and shade of Alu Bond or equivalent, fixed to wooden / aluminium frame work as in door/cupboard shutters all as specified

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster (Work in foul condition and in shaft) complete all as specified

M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished even & smooth without using extra cement mixed with liquid water proofing compound (Work in foul condition and in shaft) all as specified. Note - Liquid water proofing compound will be measured & paid separatly.

Supply only Liquid Water proofing compound of approved quality.

M&L for preparation of new platered surfaces and applying two coat of weather proof paint appex ultima on wall over a coat of wall primer (Work in foul condition and in shaft) including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

M&L for complete removal of existing treatment and applying two coats two coat of weather proof paint appex ultima on wall over a coat of wall primer including necessary scaffoldings all as specified and as per manufacturers instructions and as directed.

S & F in repair 110 mm PVC (SWR) gully trap setting and jointing with solvent cement.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area of wall n.exc 150 Sqcm

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area of wall exc 150 Sqcm and n.exc 400 sqcm

Removing building materials etc. (other than materials considered under schedule of credit) upto a distance of 1.50 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Taking down existing water proofing treatment of any description and removal rubbish off the premises, complete all as specified.

M&L for 10mm thick rendering in CM 1:3 on roof mixed with liquid water proofing compound surfaces finished even and smooth without using extra cement, complete all as specified. Note: Liquid water proofing compound shall be measured and paid separately

M&L, applying evenly a tack coat of bituminous primer of approved brand and applied as per manufacturer's instruction after cleaning surface for laying APP based polymeric membrane minimum weighing 4 Kg/Sqm and minimum 4mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) by torch application complete as specified and as directed.(for roof/parapet) Note:- Overlapping of membrane, sealing the joints, torching etc shall be done as per manufacturer's instructions. Area of flat/sloped area of roof surface and all surface of parapet where water proofing treatment is done will be measured for Payment purpose.

M&L for cement concrete 1:2:4, type B1 ( using 20mm graded stone aggregate) as in filling and mass concrete, roof slab padding and roof kerb preparatory to roof treatment, complete all as specified.

Preparation of new steel surfaces of any description over 10 cm in width or girth and applying with two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of old decorated surfaces and applying two coat of oil bound distemper on ceiling complete as specified and as per manufacturers instructions.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete (except concealed conduit) including fittings such as switches ceiling roses, pendent, regulators, sockets, earth plug and socket etc and making good matching to the existing colour to the disturbed surface complete all as specified and as directed.

Material and labour for colour code point wiring conceald FRLS PVC insulated and unsheathed cable with 2.5 Sqmm copper conductor single core multistrand 1100 Volt grade confirming to IS 694 drawn through PVC conduit of suitable size of modular GI metal box for modular cover plates to be fixed the switchs, sockets, regulators etc. and including 2.5 Sqmm earth wire copper insulated wire connected to common earth dolly all as specified.

Material and labour for colour code point wiring conceald FRLS PVC insulated and unsheathed cable with 1.5 Sqmm copper conductor single core multistrand 1100 Volt grade confirming to IS 694 drawn through PVC conduit of suitable size of modular GI metal box for modular cover plates to be fixed the switchws, sockets, regulators etc. and including 1.5 Sqmm earth wire copper insulated wire connected to common earth dolly all as specified .

S&F Moduler switch one way 6A ,1 module ISI marked 230V,50Hz supply complete all as specified.

S&F Moduler switch one way16A ,1 module ISI marked 230V,50Hz supply complete all as specified.

S&F Moduler socket one way16A ,1 module ISI marked 230V,50Hz supply complete all as specified.

S&F modular white cover plate with frame1/2/3 module.

S&F modular white cover plate with frame6 module

S&F Ceiling rose. 3 terminals PVC isolated body ISI marked base.

S&F in replacement wall mounted 20 W LED 4 ft batten output lumens greater than 100 lumen/watt,CRI = >60, CCT = >5500, Internal surge protection up to 2KW , Power Factor>0.95 having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver making connection to ceiling rose to fitting with 3 core 1sqmm copper conductor complete all as specified and as directed by Engr -in-charge. Make Havells /Philips/Crompton

Supply and fix Exhaust fan Heavy Duty AC single phase 230/240 volt of size 300mm sweep making connections to ceiling rose to fitting worth 3 core 1.5 sqmm copper conductor complete all as specified and directed by Engr-in-charge Make : Havells/ Crompton/Usha.

Remove the existing LED light fittings(Any type) and refix the same after tiling work as per the direction of Engr in charge.

Supply and fixing LED Down ligher fitting 15 W out put lumens greater than 100 lumens/watt with round shaped surface mounted LED down lighter PMMA diffuser,powder coated white finish housing making connections to ceiling rose to fitting with 3 core, 1 sqmm copper conductor complete all as specified and as directed by Engineer-in-charge. Make Havells/ Philips/Crompton

S&F mirror light 14W out put lumens greater than 100 lumens/watt, CRI=>60, CCT=>5500, Internal surge protection up to 2KW , Power Factor 2 feet making connection toceiling rose to fitting with 3 core 1 sqmm copper conductor complete all as specified and as directed by Engr-in-charge. Make Crompton / Havells/Philips

Supply and fix Bulk head fitting out put lumens greater than 100 lumens/watt oval shape edge-lit LED 10W luminaire comprising of high brightness LEDs making connections to ceiling rose to fitting with 3 core, 1 sqmm copper conductor complete all as specified and directed by Engr-in-charge. Make; Havells /Jaquar/Crompton.

Gates Infra Construction Co

SANDR