Providing Standard Lane Markings for Main Roads Tirumala bypass Road to Ankura Hospital at Renigunta Road Via Subbalakshi Statue with Themo Plastic Paint for Municipal Roads in Zone-I area.

Supply and application of Thermo- Plastic paint : Providing and Laying of hot applied Thermo plastic road marking compound, 2.5mm thick including reflectorising Glass beads with Refelctorising beads on Bituminous surface at 250 Gms per Sqm area, thickness of 2.5 mm is exclusive of surface applied glass bead as per IRC 35 including cost of conveyance of materials, labour charges, hire charges of machinery for finished item of work. The materials should be of BERGER make (as per MORTH 803) the finishe dsurface to be level, uniform and free from steaks and holes as per specification 803 MORTH equivalant and nust comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. b) Luminance factor of the material should be in the range of 80-85% at 45 degress centigrade as per AASTHOM 249 c) Crack resistance :- The applied panel cured for 7 days under ambient condition and then should be tested as per BS 3262 Part 1, 1989 and should pass at the range of 0 Degree Centigrade to 10 Degree centigrade. d) Adhesion :- Strong. e) Softening point :- 102 Degree Centigrade f) Dried firm finish :- Smooth and Uniform g) Night vision :- High as directed by the Engineer - in - Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause confirming to IRC 35-1997 on Both Bituminus Surface & on Cement Concrete Pavement Surface Note : 1. A Sealing primer may be applied in advance on Cement Concrete Pavement to Ensure proper bonding. Any laitance and/or curing compound to be removed where paint is required to be applied on conrete surface. 2.Cost of Painter is allready included in hire charges of road marking machine (Type-XI Rate in 2025 Excluding Taxes for SH / NH Approved by R & B Department)