Special Repair to Cat Morva Hadaf Police Line, Dist Panchmahal (Including Electrification) [2nd attempt]

In Figure In Words

Cleaning and desilting of gully trap chamber including removal of rubbish mixed with earth

Rs. One Hundred Eight

1 etc, and disposal of same, all as per the direction of engineer-in charge 142.00 Nos 108.30

& Paise Thirty Only

Labour charges for cleaning c of sump / GL cistern including cleaning and remоving algae,

calcinations, sludge, dirt deposition from bottom and as well as from wall of container, dis Rs. Two Thousand Two

2 infecticion by bleaching powder with all necessary tools and plants, labours and cost of dis 28.00 Nos 2276.00 Hundred Seventy Six

infectant etc complete Only

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas

Rs. Forty Six & Paise

3 and disposal of unserviceable materials with all lead and lift. 318.00 Sqmt 46.31

Thirty One Only

Dismantling Sanittary fitting like wash basin, W.C. pan indian and europion type, flushing Rs. Three Hundred

4 tank etc. including staking the material with all lead and lift. 14.00 Nos 390.60 Ninety & Paise Sixty

Demolition including stacking of serviceable materilas and disposal of unserviceable Rs. One Thousand

5 materials with all lead and lift. (i) R.C.C. work 1.00 Cmt 1020.60 Twenty & Paise Sixty

Removing & Scraping of old deteriorated plaster of any thickness from wall / RCC member

including staking of serviceable material disposal of unserviceable from site of work with all Rs. Eighteen & Paise

lead and lift. Seventy Five Only

Removing and refixing after repairing door, window, cup board,ventilator shutter & repair

Rs. Three Hundred

frame with providing necessary wood corner M.S. plate support,hinges etc.complete.

7 217.00 Sqmt 321.78 Twenty One & Paise

Seventy Eight Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Removing dry or oil bound distemper by a washing and scraping and sand papering the

Ceiling and sloping surface smooth including necessary repairs to scratches complete.

Rs. Twelve & Paise

Forty Six Only

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall

Rs. Ten & Paise Eighty

9 surface smooth including necessary repairs to scratches complete. 8,035.00 Sqmt 10.88

Eight Only

Cutting out cracks of walls to V- section , cleaning out, wetting , grouting with cement and

Rs. Sixty Four & Paise

10 sand slurry 1:3 (1-cement 3-sand )for any height . 19.907 Rmt 64.58

Fifty Eight Only

Excavation for foundation upto 1.5 M. depth incluing sorting out and stacking of useful Rs. One Hundred

11 materials and disposing of the excavated stuff of any lead & Lift [] Loose or soft 23.00 Cmt 115.92 Fifteen & Paise Ninety

Excavation for foundation upto 1.5 M. depth incluing sorting out and stacking of useful

Rs. Two Hundred Fifty

materials and disposing of the excavated stuff of any lead & Lift [] Hard Murrum

12 22.00 Cmt 253.58 Three & Paise Fifty

Eight Only

Excavation for foundation upto 1.5 to 3 M. depth incluing sorting out and stacking of useful

Rs. Two Hundred

materials and disposing of the excavated stuff of any lead & Lift [] Hard Murrum

13 22.00 Cmt 270.83 Seventy & Paise Eighty

Three Only

Excavation for foundation upto 3 to 5 M. depth incluing sorting out and stacking of useful

Rs. Two Hundred

materials and disposing of the excavated stuff of any lead & Lift [] Hard Murrum

14 8.00 Cmt 282.90 Eighty Two & Paise

Ninety Only

Filling available excavated earth (excluding rock ) in trenches, plinth sides of foundation etc.

Rs. One Hundred

in layers not exceeding 20 cms. in depth consolidation each deposited layer by ramming and

15 72.00 Cmt 129.10 Twenty Nine & Paise

Rs. Two Hundred

watering, ramming, consolidating and dressing etc.complete

16 159.00 Cmt 271.25 Seventy One & Paise

Twenty Five Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Suppllying and Filling Cinder in Sunk Portions for All Lead and Lift etc. Complete. Rs. Seven Hundred

17 26.00 Cmt 791.68 Ninety One & Paise

Sixty Eight Only

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone agg. Rs. Three Thousand

20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Five Hundred Forty

Plinth Eight & Paise Thirty

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone

Rs. Two Thousand Six

aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A)

19 89.00 Cmt 2629.07 Hundred Twenty Nine

Foundation and Plinth

& Paise Seven Only

Providing and laying Controlled cement concrete M-250 and finishing smooth with curing

etc.. complete including the the cost of formwork of Plywood only with fair finish & Proping

must be of steel only so as to give fair finish but exculding the cost of reinforcement for Rs. Six Thousand Nine

20 PLINTH BEAMS of any cross sectional area of beam. Rate are also inclusive of providing 1.00 Cmt 6971.05 Hundred Seventy One

and mixing Plasticiser of approved make in proportion as per mix design etc.as per direction & Paise Five Only

of Engineer in charge.

Providing and laying Controlled cement concrete M-250 finishing smooth with curing

etc.complete including the the cost of formwork of Plywood only with fair finish & Proping

must be of steel only so as to give fair finish but excluding the cost of reinforcement for Rs. Eight Thousand

21 R.C.C. work in SLAB having thickness of 10cm and upto 13cm for GROUND FLOOR Rate 4.00 Cmt 8126.50 One Hundred Twenty

are also inclusive of providing and mixing Plasticiser of approved make in proportion as per Six & Paise Fifty Only

mix design etc.as per direction of Engineer in charge.

Providing TMT Bars Fe -500 D reinforcement for RCC work including cutting, bending,

binding and placing in position etc.complete for all floors.Steel must be used Approved

Rs. Seventy Five &

22 Material list of GSPHCL. 336.00 Kg 75.46

Paise Forty Six Only

Brick work using common burnt clay building bricks having crushing strength not less than Rs. Three Thousand

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Nine Hundred Eighty

Conventional One & Paise Twenty

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Provinding 10 mm thick cement PLASTER in single coat of interior plastering and finished

even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating coat of

neat cement slurry including providing and mixing WATER PROOFING material in C.M. in Rs. Two Hundred

24 proportion recommended by the manufactures for all floors.Including finishing with a 78.00 Sqmt 221.43 Twenty One & Paise

floating coat of neat cement slurry for ALL Floors. Forty Three Only

Repairing of damaged RCC columns, lintels, chhajja, etc up to 10 m height by providing and

applying polymer modified plaster (PMCM) in proportion 1:3 (cement:sand) with 10 litre of

Rs. Four Hundred Fifty

SBR per bag of cement in parts of 20 mm thickness for the total thickness of 40 mm including

25 72.00 Sqmt 454.33 Four & Paise Thirty

application of bond coat 1:1 one part cement 1 part sand on old concrete surface including

Three Only

scaffolding, curing, cleaning etc Complete

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior

Rs. Two Hundred

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing

26 40.00 Sqmt 213.11 Thirteen & Paise

with floating coat of neat cement slurry at GROUND FLOOR.

Eleven Only

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior

Rs. Two Hundred

plastering and finished even and smooth in C.M. 1:4 ( 1cement : 4 sand ) including finishing

27 37.00 Sqmt 240.22 Forty & Paise Twenty

with floating coat of neat cement slurry at FIRST FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior

Rs. Two Hundred Sixty

plastering and finished even and smooth in C.M. 1:4 ( 1cement : 4 sand ) including finishing

28 38.00 Sqmt 267.33 Seven & Paise Thirty

with floating coat of neat cement slurry at SECOND FLOOR.

Three Only

Provinding 20 mm thick SAND FACED Cement PLASTER (using Gutkha) on walls above

ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm Rs. Three Hundred

29 thick finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height. 240.00 Sqmt 326.03 Twenty Six & Paise

Three Only

Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint treatment

treatment in two coats of vertical and horizontal surface of depressed portion of Bath/W.C.

Rs. One Hundred Ten

30 as directed by engineer in charge.This treatment shall be carried out over & above water 78.00 Sqmt 110.70

& Paise Seventy Only

proofing plaster.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two

coats) to give an required shap even shade after throughly brushing the surface to remove

all dirt and remains of loose poweder material etc complete. Rate are inclusive of applying

two coat of lapy (Putty) and one coat of primer on new Ceilling / Slop Surface to give and Rs. One Hundred

31 even shade including thoroughly brushing the surface free from mortar dropping and other 1,338.00 Sqmt 186.26 Eighty Six & Paise

foreign matter and sand papered smooth. Fine Putty, Primer & Plastic Paint Shall be of As Twenty Six Only

per Approved brand of GSPHCL material list only for All Floors

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required

shap even shade after throughly brushing the surface to remove all dirt and remains of loose

poweder material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and

one coat of primer on new wall surface to give and even shade including thoroughly Rs. One Hundred

32 brushing the surface free from mortar dropping and other foreign matter and sand papered 4,360.00 Sqmt 176.01 Seventy Six & Paise

smooth. Fine Putty, Primer & Plastic Paint Shall be of As per Approved brand of GSPHCL One Only

material list only for All Floors

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over

and above applying One Coat Of Primer to give an required shape even shade after

Rs. One Hundred Forty

thoroughly brushing the surface to remove all dirt, and remains of loose powdered

33 3,759.00 Sqmt 147.68 Seven & Paise Sixty

materials.etc complete. Primer & Paint Shall be As per Approved brand of GSPHCL material

Eight Only

list for Any Height

Painting two coats (excluding priming coat) on perviously painted steel and other metal

Rs. Ninety Three &

34 surfaces with Synthetic Enamal paint. 368.00 Sqmt 93.90

Paise Ninety Only

Painting two coats (excluding priming coat) on perviously painted Wood and woode based

Rs. One Hundred Ten

35 surfaces with enamal paint. 217.00 Sqmt 110.06

& Paise Six Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive including dismentaling of existing flooring and material Rs. One Thousand Five

36 jointed with color cement slurry including finished with flush pointing & cleaning the 60.00 Sqmt 1583.50 Hundred Eighty Three

surface etc. complete. Size & Shade of tiles shall be as per Approved Architecture drawing & & Paise Fifty Only

as per direction of Engineer in charge.

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile for skirting,risers

of steps and dedo over10 mm (average) base of cement mortar 1:3 ( 1 cement: 3 coarse sand)

on new surface orfixing on existing flooring by adhesive including dismentaling of existing Rs. One Thousand

flooring and material jointed with color cement slurry including finised with flush pointing Three Hundred Ninety

& cleaning the surface etc. complete. Size & Shade of tiles shall be as per Approved Material Two & Paise Twenty

List of GSPHCL, Architecture drawing & as per direction of Engineer in charge. Only

Providing and laying Non skid Ceramic tiles flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush Rs. Nine Hundred

38 pointing in white cement. (Size of tiles shall be 300x300mm) Tiles shall be Approved material 69.00 Sqmt 948.15 Forty Eight & Paise

list of GSPHCL only. Fifteen Only

Providing& laying WHITE COLOURED GLAZED TILES in skirting, risers of steps and

DADO on 10mm thick cement plaster 1:3(1cement :3 coarse sand) & jointed with white

Rs. One Thousand Four

cement slurry. Tiles shall be of approved quality, size & colour.Size of Tiles Shall be 600 x

39 212.00 Sqmt 1403.33 Hundred Three & Paise

300 mm.for size and shape of tiles shall be as per Approved Architectural Drawing & as per

Thirty Three Only

Direction of Engineer Incharge

Providing and fixing 4mm thick bajari glass bended in putty with scrapping of existing putty Rs. Six Hundred

40 and glass in existing windows as directed by engineer in charge. 16.00 Sqmt 670.95 Seventy & Paise Ninety

Providing and fixing PVC waste water pipe with waste coupling for w.b. and kitchen sink. Rs. One Hundred

41 Including pvc waste fittings complete. Flexible pipe. For 32mm dia 108.00 Nos 119.55 Ninteen & Paise Fifty

Providing & fixing 150 mm X 150mm S.S.jali for floor or nahni trap.etc. complete as

Rs. Seventy Two &

42 approved by the engineer incharge. 108.00 Nos 72.16

Paise Sixteen Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Specifications Rs. Nine Hundred

43 and as per the Instruction of Engineer In charge. Materials used for the above items Must be 48.00 Nos 990.61 Ninety & Paise Sixty

list approved by G.S.P.H.C.L. One Only

Providing & Fixing Pillar Cock. Rate are inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Rs. Nine Hundred

44 Engineer In charge. The Model & Make of Pillar Cock Shall be as per the Approved Make 12.00 Nos 976.73 Seventy Six & Paise

List of GSPHCL. Seventy Three Only

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE

Rs. Two Hundred Two

having National Sanitation Foundation (NSF) seal For Portable Water of 20 mm. dia.

45 72.00 Rmt 202.97 & Paise Ninety Seven

nominal bor tube fitting and clamps including making good the wall, ceiling and floor etc.

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE

having National Sanitation Foundation (NSF) seal For Portable Water of 25 mm. dia.

Rs. Two Hundred

nominal bor tube fitting and clamps including making good the wall, ceiling and floor etc.

46 88.00 Rmt 247.25 Forty Seven & Paise

Twenty Five Only

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE

having National Sanitation Foundation (NSF) seal For Portable Water of 40 mm. dia.

Rs. Four Hundred

nominal bor tube fitting and clamps including making good the wall, ceiling and floor etc.

47 63.00 Rmt 437.66 Thirty Seven & Paise

Sixty Six Only

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE Rs. Six Hundred Fifty

48 40 mm dia.Valve must be of approved make list by GSPHCL 4.00 Nos 656.86 Six & Paise Eighty Six

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE Rs. Four Hundred

49 25 mm dia.Valve must be of approved make list by GSPHCL 12.00 Nos 416.47 Sixteen & Paise Forty

Seven Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing and fixing to wall,ceiling and floor U.PVC / SWR soil waste pipe with 'O' ring

mm dia of ISI 13592/92. Rate inclusive of all fittings like single or double "Y" with door,

reducer, coupler single T with door bend, pipe clip on wooden patti etc.complete and making

Rs. Fifty Five & Paise

50 good the wall, ceiling and floor. ISI make only joints shall be sealed by pipe sealant. 29.00 Rmt 55.08

Eight Only

Providing and fixing to wall, ceiling and floor UPVC/SWR Soil Waste Pipe with 'O' Ring

75 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door,

Rs. Two Hundred

reducer, coupler single 'T' with door bend,including All Labour Charges etc. complete and

51 142.00 Rmt 245.74 Forty Five & Paise

making good the Wall, Ceiling and Floor, ISI make only. Joints shall be sealed by pipe sealant.

Seventy Four Only

Providing and fixing to wall, ceiling and floor UPVC/SWR Soil Waste Pipe with 'O' Ring

110 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door,

Rs. Four Hundred

reducer, coupler single 'T' with door bend,including All Labour Charges etc. complete and

52 76.00 Rmt 471.36 Seventy One & Paise

making good the Wall, Ceiling and Floor, ISI make only. Joints shall be sealed by pipe sealant.

Thirty Six Only

Providing and fixing to Wall Ceilling and Floor SWR Rain Water Pipe as Per IS-13592 of

90mm Dia. Complete with Special Flings, Compressor type Fittings, Wall clips on wooden

patty including making good the ceiling and floor on terrace rain water pipe shall be 90 mm Rs. Three Hundred

53 Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end near by Ground level 16.00 Rmt 302.54 Two & Paise Fifty Four

rate are Inclusive of all Necessary Fittings required for ALL FLOORS. Only

Provinding and fixing water Closet Squatting (ORRISSA TYPE W.C. PAN ) size 580mm first

Rs. One Thousand One

quality including necessary "P" or "S" trap, including jointing the trap with pan & soil pipe

54 12.00 Nos 1105.70 Hundred Five & Paise

in viterous chine white colour, Joints shall be pipe sealent.

Seventy Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S"

Trap including Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S

heavy duty rack bolt having 16mm dia, 165mm length using Plastic sleeve Make by Using

Drill Bitt Only. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete Rs. Five Thousand Four

55 as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The 2.00 Nos 5470.90 Hundred Seventy &

Model & Make of Wall Hung & Flush Tank Shall be as per the Approved Make List of Paise Ninety Only

Providing and fixing Urinal of approved quality including connection with trap and with Rs. One Thousand Five

integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x Hundred Forty One &

300mm. Paise Ninety Three

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I . fisher union,

P.V.C water pipe with Connection from Stop Cock to Pillar Tap, 32mm dia. C.P. brassa waste

coupling with Connection 32mm dia waste Pipe up to N.T etc. Complete. Rate are inclusive Rs. Three Thousand

of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Nine Hundred Thirty

Specifications and as per the Instruction of Engineer In charge. Materials used for the above Five & Paise Thirty

items Must be list approved by G.S.P.H.C.L. Rate also inclusive of pvc bottle trap of Three Only

Approved make by GSPHCL

Providing and fixing 24 mm thick THREE LAYER RIGID PVC PLAIN DOOR shutter with

Frame made from co-extruded three- layer rigid PVC foam sheet (single Extruded) with

density not less than 600 kg/cbm outer layer 1 mm thick should be of rigid PVC with density Rs. Four Thousand

58 of not less than 1400 kg/cbm manufactured by an ISO 9001-2015 certified company. 41.00 Sqmt 4476.00 Four Hundred Seventy

Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. Six Only

Providing and fixing precast RCC cover including angle frame of 40mm X40mmX3mm

section and CC 1:1.5:3 precast I.C. cover for Chamber etc including 8mm HYSD steel at 15 cm

c/c both way and oil painting of angle frame and finishing of concrete with CM-1:3 etc Rs. One Thousand

59 complete finished dimension of concrete cover shall be 0.6m X 0.45m X 0.07m size rate are 13.00 Nos 1702.00 Seven Hundred Two

inclusive of cost of angle frame, reinforcement, concrete,finishing work and two peice of M.S. Only

Flat 25mmX3mm size as handle.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard Rs. Four Hundred

60 pattern) te weight of cover to be not less 4.53Kg.) 6.00 Nos 491.80 Ninety One & Paise

Eighty Only

Provinding and laying inegrated cement based proofing treatment of required thickness over

the roof including 10mm thick waterproofing cement plaster in cement plaster in cement

mortar1:3 and chaina mosaic fitting and finally finishing the surfase with white cement

slurry and slopping out taerrace slabs with following specification laid to required slope not

flatter than 1:80 ( the thickness of water proofing treatment near rainwater outlet or the Rs. Eight Hundred

61 lowest point of the finishedslope shall not be less then 45mm, including treating the vertical 44.00 Sqmt 899.70 Ninety Nine & Paise

surfaseof the parapet wall up to 20cms . height above finished level of terracing including Seventy Only

finishing the top with joint less water proofing plaster , curing , testing etc. complete. Rate is

including ten years performance of guarantee bond to be given on stamp paper. (No extra

shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of cement

admixed with properly water proofing compound conforming to IS -2645 and 10 mm thick

water proofing cement plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the -

surface before treatment

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size with 50% of cement

mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water proofing cement plaster in

cement mortar 1:3 (1 cement ,3 coarse sand) admixed with proprietary water proofing

compound conforming to IS 2645 to required slope and treating similarly the adjoining walls -

up to 200mm height incl. rouding of junction of walls.

(C) After Two Days of proper curing applying a second floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint less cement

plaster of mix 1:3(1cement:3coarse sand ) admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with trowel with neat

cement slurry

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

(E) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curring for final taste

All above operation to be done in order and as directed and specified by the Engineer In

Providing & Fixing 3mm thick acrylic sheet with vinyl letter colour-2073-dark grey for back Rs. Seven Thousand

ground and colour -2190-white letter with required screws etc as per required sizes complete One Hundred Ninety

etc as per specification & instruction of engineer in charge. Three & Paise Eighty

Eight Only

Providing and laying Tree Plantation including providing and fixing Tree Guard. Rate also

inclusive of maintaning the Tree Plantation in live condition at the time of completion of

wprk and handing over of tree plants. Tree to be planted well in time say at the time of

63 excavation of the building . Rate also inclusive of necessary Tree Guard with one coat of Zinc 30.00 Nos 600.00 Rs. Six Hundred Only

yellow oxide primer & two coats of anticorrsive Oil Paint.

Constructing of cooking platform ( sandwich type ) 68cm width and 80cm high resting on

thick sandwiched polish Granite Slab in C.M 1:3 with providing and fixing 25 mm thick

rough kota stone at bottom and 20 to 25 mm thick Polish Granite stone ( single piece/

telephonic Black ) top & Vertical and polished granite stone (single piece/ telephonic Black ) Rs. Three Thousand

20 to 25mm thick on top & 18mm thick in Vertical with 15mm high machine cut polished Seven Hundred Fifty

64 granite round moulded Top facia patty including polishing etc . complete as per drawing 3.00 Rmt 3757.60

Seven & Paise Sixty

and specification without stainless steel sink including necessary cutting for sink & making Only

hole for gas pipe and fixing P.V.C bend of 25mm dia.

Providing and laying Telephonic Black Garnite Slab (15 to 18 mm thick) of approved colour

& Quality & brand , one sid polished flooring over 20 mm (average) base of cement mortar

1:3 (1 cement :3 coarse Sand ) laid and jointed with grey cement slurry including rubbing Rs. Two Thousand One

65 ,curing including grooving, moulding,nosing of corners and mirror polishing complete for 1.00 Sqmt 2116.20 Hundred Sixteen &

flooring of steps, stairs with trades & risers etc complete as directed by Engineer in charge. Paise Twenty Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing Supplying and fixing Single Pipe Bracket System with U Bolt Rubber Mounted for

Rs. One Hundred

Pipe Supporting Clamping system for external vertical Fixed line with wall distance 3"

66 219.00 Nos 182.83 Eighty Two & Paise

including nuts, Bolts, Fastner etc. Complete as per detailed specification and as directed by

Eighty Three Only

engineer in charge

Providing Supplying and fixing S4 Channel system (S4 Channel+Profilr Bracket+U Bolt

Rubber Mounted System) for multiple pipes for external vertical fixed line with wall distance Rs. Four Hundred

67 3" including Nut, Bolt, Fastners etc complete as per details and as directed by engineer in 68.00 Nos 421.58 Twenty One & Paise

charge. Fifty Eight Only

Constructing brick masnory chamber for under ground C.I.Inspection chamber and bends

with Brick having crushing strength not less than 35 Kg/Sq.cm.in cement mortar 1:5,RCC top

slab with1:3:6 in cement mortar 1:5 ( cover with 8 mm dia. steel @ 15 c/c and R.C.C. top slab

with 1:2:4 mix ( 1 cement : 2 coarse sand,4- stone aggregates 20mm nominal size) foundation

cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth with a floating coat of neat Rs. Three Thousand

cement on walls & bed concrete etc. complete. Rate are also inclusive of outside plaster 15mm Seven Hundred Ninety

thick in C.M 1:3 from top of chamber and all side upto 45cm deep below ground level (I) Three & Paise Eighteen

inside dimensions 455mm x 610mm and 450mm deep for Single or multi purpose pipe line. Only

Rate Also Inclusive RCC Frame with cover MD 10 ton (Rubber mould Finish) Inner Size

x 450mm with all necessary fittings

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing and supplying of class SN8 structured wall polythene piping system (Pipe with

online/offline coupler and elastometric sealing ring) with non-smooth external Annular

corrugated and smooth internal surfaces (Double wall) for non Pressure underground

sewerage & Drainage application as per EN 13476-3 includind all local and central

taxes,transportation, freight charges, octrol, inspection charges, loading, unloading,

convetance to the departmental stores etc. complete. (150mm ID dia) Including lowering,

laying and jointing of class SN8 structured wall. ( External Annular corrugated & smooth

internal Surface) polyethylene piping and fittings with the help of coupler (Online/offline)

attached with one end pipes, sliding over the elastometric sealing rubber ring placed on the Rs. Three Hundred

specified valleu of the corrugation at the spigot end, lowering the same into the trench, Ninety Six Only

laying on the lower bedding (construction at bottom of trenches) at prescribed gradient depth

& alignment testing the water tightness of the joints, ensuring the continuity tests of specified

pipe segment etc. complete as per drawing, specification & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of

engineering-in-charge.

Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from

M.S. flat, square bars, round bars, C-channel, Square/box pipe as per detail Drawings. Rate

is including welding with grinding and applying of mild steel putty with hardener into

groove to have smooth surface, two coats of Oil paint and one coat of yellow Zinc chromate Rs. Seventy Five &

primer coat of approved brand only oil paint shall be of brand & shade as per Approved by Paise Twelve Only

GSPHCL & structural steel must be ISI make Only.

Providing and laying Damp Proof Suprema White on Terrace surfaces (Two coats) orver and

above. Applying one coat of primer to give an required cleaning of terrace and open old

VATA of China mosaic after thoroughly brushing the surface to remove all dirt and remains

of loose powdered materials etc complete. Primer and Damp Proof shell be used as per Rs. Four Hundred Nine

71 approved material list of GSPHCL or Engineer in Charge. The whole Terrace so finished shall 83.00 Sqmt 409.30

& Paise Thirty Only

be flooded with water for a minimum period of two weeks for curing for final test. Rate is

including 10 years performance of guarantee bond to be given on Stamp Paper.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade concret as per approved design and Rs. Three Hundred

72 including excavation for fixing in proper line and level,filling the joint with C:M 1:3 98.00 Rmt 358.06 Fifty Eight & Paise Six

(1cement:3fine sand) etc complete. Only

Total Sch B-1 Civil cost Rs.

Electric Item Discription

Providing and fixing Point wiring with 1.1 KV grade ISI marked approved make 2 x

sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS

wire for earth continuity in exiting FIA approved ISI mark white colour medium class

20/25 mm dia. embossed rigid PVC pipe erected flushed on wall/ceiling complete with

company fabricated Metal Groove PVC fitting fixed with adhesive solution erected On wall

along with continuous G. I. fish wire to draw wires complete with approved make 5/6

Amp. tissino type switch and accessories mounted On Metal / PVC/Wooden Box covered RS: Two Hundred

73A with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp 110.00 Point 255.00

Fifty Five only

holder/ceiling rose / H.D.Connector as directed as directed for future extention , if required

agency has to erect one higher size box & plate as per instruction of EIC. cost of blank plate

shall be paid as per tender itemFor Light Point-In existing medium class Rigid PVC pipe

and accessories erected Open on wall/ceiling complete

For Bell Point-

RS: Two Hundred

73B 12.00 Point 255.00

Fifty Five only

For Fan Point--In existing medium class Rigid PVC pipe and accessories erected Concealed in

RS: Two Hundred

73C wall/ceiling complete 36.00 Point 255.00

Fifty Five only

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI Make)--In

existing medium class Rigid PVC pipe and accessories erected Concealed in wall/ceiling

RS: Two Hundred

73D complete 36.00 Point 223.00

Twenty Three only

For loop on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI Make) RS: Sixty Six

73E 100.00 Point 66.00

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Electronic Hum free EME Socket Type 5 Steps Fan Regulator

RS: Two Hundred

74A 72.00 Each 217.00

Seventeen only

One no Single pole 6 A Switch / Bell push RS: Thirty One

74B 12.00 Each 31.00

One no 3/5 pin 6 A Socket RS: Thirty One

74C 36.00 Each 31.00

One no Single pole 16 A Switch RS: Forty Seven

74D 36.00 Each 47.00

One no 6/16 A Universal Socket RS: Forty Seven

74E 36.00 Each 47.00

One no Single pole 16 A Switch & One no 6A/16A Universal Socket combined with

RS: One Hundred

74F indicator & fuse 24.00 Each 124.00

Twenty Four only

Bakelite ceiling, rose RS: Eighteen

74G 24.00 Each 18.00

Bakelite lamp holder RS: Twenty Two

74H 100.00 Each 22.00

Providing & Erecting 3mm thick Polycarbonate (PC) sheet with grooving as directed

75 4000.00 Sq. inch 2.00 RS: Two only

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed)

RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous

RS: Twenty Four

76 fish wire to draw mains with necessary fittings and junction boxes for following dia. (a) 20 667.00 Mtr. 24.00

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade In

Existing FIA approved ISI mark medium class 20/25 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab along

with continuous G. I. fish wire to draw mains laid in approved manner with plastering by

cement mortar & finishing the surface to match the wall / ceiling complete with FRLS PVC RS: Forty Six

77A insulated wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper 300.00 Mtr. 46.00

multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for

earthing as per standard colour code.(In Existing 20/25mm Pipe) [Wire must be having box

packing](Conductor resistance should be as per IS:8130/1984 )

For 2 X 6.0 sq.mm. copper multi stranded conductor mains with 2.5 sq. mm copper multi

stranded conductor earthing as per standard colour code ---(In Existing 20/25mm Pipe)[Wire

must be having box packing](Conductor resistance should be as per IS:8130/1984 ) RS: One Hundred

Twenty only

Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. RS: Thirty Seven

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing & Erecting 1.0 mtr long Earthing system by making minimum bore of 150 mm

dia in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod

must be made from Corrosion free Hot dip galvanizing pipes having following specification.

Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value

during defect liability. If required.

(A) Earthing Electrode Outer Pipe:- 88mm O.D, Outer Pipe wall thickness :- 2.6mm RS: Five Thousand

79 minimum, Inner pipe:- 42mm O.D, Pipe thickness:- 2.5mm, Terminal Size:- 70 mmX100mm 4.00 Each 5785.00 Seven Hundred Eighty

length, Zinc coating(Hot dip galvanising):- 75-100 micron, Nut bolt:- 2 no. with washer Five only

suitable for 14mm dia, total minimum Weight (approx) of earth electrode with inside

conductive material 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound :-Earthing compound should be capable to retain moisture for

min.1year weight(appro.) of earth electrode with inside conductive material is 15 Kg.

(D) Chamber and cover :-Earthing chamber should be size of 400mmX400mmX400mm depth

and Cover should be heavy duty cast iron with required size of 300mmX300mmX4mm thick.

test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail & sample for approved

before supplying

Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral &Earthingupto 02 volt. Agency has to maintain earthing& its value for one

year. If required. Earthing must be done in the presence of A.E (GSPHCL)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft

soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) RS: Two Hundred

Seventy Six only

Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage

0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made from

Aluminum extrusion having enough strength (sample must be approved by EIC) with

polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.(B) Rated input voltage and frequency: 220V to

VAC ; 50Hz.(C) Rated input wattage: max. 24w(D) Rated input current : 0.2 Amp(E) Power

Factor : Min. 0.90(F) ATHD : Max. 15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT:

6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @

L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection : RS: Three

81 Min. 2KV(N) IP rating: IP 20(O) IK rating : IK 02(P) Short circuit , Open circuit & Reverse 100.00 Each 370.00 Hundred Seventy

Polarity Protection must be provided(Q) Fixing clamp design & strength should be sufficient only

to hold the fitting erected on wall or ceiling.(R) 3 core copper wire of appropriate size with

earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit

yrs free replacement Guarantee for complete Fixture) [Approval will be given strictly subject

to item specification]

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I,

50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating

Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5)

RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of

heavy duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade

powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: Min. 1.5 MFD (15% RS: One Thousand

82 Tolerence) as per IS:1709-1984, (14) Down road: up to 1.0 mtr as per site requirment, (15) 72.00 Each 1929.00 Nine Hundred Twenty

Required fixing accessories, (16) 3 core 0.50 sq.mm ISI wire as per site requirment, (17) No Nine only

vibration and noise due to mechanical parts. (18) Safety wire provided by manufacturer with

ceiling fan. (Agency has to erect safey wire with ceiling fan and checked with EIC) (OEM has

to approved model as per tender specification and tested at ERDA)

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x

mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy meter

RS: One Thousand

(contractor shall make approved drawing of Bakelite sheet To arrange required No. of

83 2.50 Sq. Mtr. 2289.00 Two Hundred Eighty

Energy meter & ICDP switch -busbar etc. as per Actual space available in electrical room at

Nine only

Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to

RS: Sixty Nine

84 be erected as per I.S. 3.00 Each 69.00

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS:

(part 24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra

violet material properties with necessary connecting accessories of same material at

required depth to be laid 90 cms. under ground for laying of cable below ground / road RS: One Hundred

surface for enclosing cable and back filling the same to make ground as per original. (A)For Seventeen only

Outer dia.50mm and Inner dia. 38mm (Test Certificate to be Submitted)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Alluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables. (C) 4 core 6 Sq. mm (for Pole and Polis Station) RS: One Hundred

Twenty Five only

Providing & fixing double compressed heavy duty flange type brass cable gland with

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating tape

RS: Forty Three

87 etc. For following size cables. For 2 to 4 core x 2.5/4.0/6.0 Sq. mm (Sigma, MCI, Comet Make 40.00 Each 43.00

Providing & fixing Solderless crimping type Alluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to

88 200.00 Each 6.00 RS: Six only

Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

erected in existing pipe of following size (Specifically for control panel, relays, power

RS: One Hundred

89A switchgears, motor starters & control wiring) with required size of copper lugs, nuts and 150.00 Mtr. 141.00

Forty One only

bolts if required. For One wire 16.00 Sq.mm (Conductor resistance should be as per

For One wire 6.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 ) RS: Fifty Six

Supplying following size of Light duty “A” Class G.I. Pipe & erecting as directed by

RS: One Hundred

90 Engineer-in-charge. For 25 mm dia. 30.00 Mtr. 171.00

Seventy One only

Coil type earthing, coil made from 8 SWG galvanised iron wire with 50 mm OD and 50 turns

(length of turns approx. 200 mm) and having additional continuous streight length of

mtr at open end and should be connected to earthing bolt and burried in 1.5 mtr deep RS: Three

91 specially prepared earth pit complete with salt and charcoal/coke as required for coil type 15.00 Each 369.00 Hundred Sixty Nine

earthing. (Approx weight of coil 1.0 to 1.1 Kgs)(3 Nos Near Comandant office exisitng Pole only

and 5 nos if Required 5 Mtr Octagonal Pole)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked

copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated RS: Forty Six

round copper wire ISI mark. only

Providing and Erecting Supplying and erecting Fabricating terminal box made from 16 SWG

M.S. sheet having following size complete with fixing arrangement for terminal board, with

necessary hole for wire entry and exit from the box. The box shall be provided with cover

and hinges on one side and bolting at other end The box shall be fixed by clamps fabricated

from 25mm x 6mm flat.The box shall be painted with one coat of red oxide and two coats of

paint having following box size 330 mm x 260 mm x 140 mm (depth). And Providing and RS: Seven

fixing Terminal board of size 5.0 x 127 x 152.4 mm. bakelite sheet with 15 Amp. kitkat pattern Hundred Two only

porcelain fuse unit with suitable brass studs with nuts, washers and clamps of size 25 mm x

mm suitable for pole painted with one coat of red lead paint.

Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure

design Including proper size approved by EIC of M.S. angles, flats, bars, square pipe,

channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and

finishing duly painted with Asian/Nerolac make premium quality oil paint and true

careyellow zinc primer,asian paint make with erection on site as per direction of engineer in RS: Seventy Five

charge with necessary grouting cementing, plastering and finishing complete. All hole and Paise Twelve only

opening of square pipe end must be closed with M.S plate welding. Payment will be done on

KG as per Actual weight. (If Required)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption

of Max. 45 W with broad single piece die cast aluminium housing of broad size for better

thermal managment (Appr.by EIC) , LED's mounted on high quality metal core PCB with

extremely precison designed heat sink complete with IP66 protection Class with

polycarbonate / Toughned glass cover. the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with high power LED

module min. 130lumen/watt with toughen Glass L70 at 50,000 hrs, provided with individual

high quality polycarbonate lenses for better light distribution. The watt capacity of each LED

must be 4> watt in street light fitting The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for protection against mis Wiring,over

voltage high and low Voltage cut Off, opertional for high amibient and high humid

RS: Three Thousand

envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the Fixture should

95 25.00 Each 3512.00 Five Hundred Twelve

meet the following technical criterias Oprating range Voltage 160 to 270 V, system efficiency

> 110 lm/w,Operation current 700ma, and Lumen Output of mini. 4950 Lumes, CCT >

5000K, CRI > 65, seperate high quality lense,beam angle 120 deg, surge immunity level at

least 10 KV non integral & 4 KV intrgral The Sperate Potted driver should have over

current, short circuit protection so that the fixture recovers once the fault is removed, over

voltage protection. In addition to the above product should be operational in the temperature

range of 0 deg to 50 deg and humidity range of 10% to 90% RH. [Note:-The manufacturer /

authorised Channel partner of the manufacturer has to submit 5 yr free replcement

Guarantee for complete Fixture] Model approved by Engineer in Charge subject to above

Specification.[Approval will be given strictly subject to item specification]

Providing & Erecting Univesal Astro interlligent Street light Control System insu with RS: Twelve

weather proof box for indoor allplication 5KVA ( as Per atteched Specification) Thousand Eight

Hundred Ninty Five

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of holes at both ends complete. (A) Up to

RS: Four Hundred

97 mm bore dia 30.00 Mtr. 488.00

Eighty Eight only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

Supplying and erecting street light pole bracket bracket consisting of ISI mark "B" class G.I.

Pipe 4.2 cm outside diameter complete with suitable B class G.I./M. S. Sleeve tubing of

mm. thick and required size and approx. 45 Cms length suitable for 76.5 / 80 mm. required

size of pole top having nuts and bolts for fixing the brackets and having spread of Upto

mtr. length with 110 deg. with vertical plane and suitable welded stiffner reducer and nipple RS: Four Hundred

98A with check nut complete painted with one coat of red oxide and two coats of alluminium 15.00 Each 487.00

Eighty Seven only

paint. or Single arm bracket suitable for terrace as per design given by EIC (a) For single

arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Ambica / Fab

/ Bajaj / Impression equipment Only) (Test certificate to be submitted)

For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:-

Ambica / Fab / Bajaj / Impression equipment Only) (Test certificate to be submitted) RS: Six Hundred

98B 3.00 Each 616.00

Sixteen only

Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt complete erected on

existing polished wooden block or in M.S. box with 3mm thick white ISI mark laminated RS: One Hundred

sheet. (Anchor-Chime model,Rider,Vision) Seventy only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS:8828 in existing box having following

RS: Three

capacity. For 40 Amp. Cat.III (in Electrical Room 36 nos, and Qts DB if Reqird )

100 56.00 Each 327.00 Hundred Twenty

Seven only

Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 25 Amp. suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing

RS: One Hundred

101 box. confirming to IS 8828/1996 with ISI Mark. Cat.-III in qtrs if required 50.00 Each 111.00

Eleven only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation

on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance RS: Two Thousand

102 feature & do not incorporate any electronic component. for following Max. rating erected as 24.00 Each 2213.00 Two Hundred Thirteen

directed. (ii) 40Amps. DP only

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel

duly powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals RS: Two Hundred

for following type of RCCB, RCCB + MCB [a] For 2 pole (in electrical Room DPMCB ) Seventy Two only

Total of Sch. B (Ele) : Rupees.

Total Tender Amount(Civil + Elect.work )

Signature of contractor

Executive Engineer

G.S.Police Housing Corp.Ltd.