Construction of Office Building and residential quarters at Nalia. (IInd Attempt)

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Rates Amount as

ITEM OF WORK Unit per

No. Quantity In

Excavation for foundation upto

1.5m depth including sorting out

and stacking of useful materials and

disposing of the excavated stuff

upto 50 metre lead.(D) Soft rock not

requiring blasting

Excavation for foundation 1.5m to

3.00m depth including sorting out

and stacking of useful materials and

disposing of the excavated stuff

upto 50 metre lead.(D) Soft rock not

requiring blasting

Filling available excavated earth

(excluding rock) in trenches, plinth,

sides of foundations etc. in layers as

directed including consolidating

each deposited layer by ramming

and watering etc complete

Filling in foundation and plinth

with murrum or selected soil in

4 132.40 layers as directed including 490.40 cum

watering, ramming and

consolidating etc. Complete.

Filling in plinth with sand under

floors including watering, ramming

consolidating and dressing

Providing and Laying Cement

Concrete 1:2:4 (1 cement :2 coarse

sand : 4 graded stone aggregate

6 198.00 20mm nominal size ) and curing 4736.60 cum

complete excluding cost of form

(A) Foundation and plinth

Providing and Laying design mix

concrete M25 using minimum

cement 345 kg/cum, crushed stone

aggregates 20 mm nominal

maximum size and curing complete

excluding the cost of form work and

reinforcement for reinforced

concrete work in

(A) Foundations, footings, base of

columns and mass concrete

Providing formwork of ordinary

timber plankings so as to give a

rough finish including

centering,shuttering, struting and

propping etc. Height of propping

8 374.10 and centering below supporting 234.60 sqm

floor to ceiling not exceeding 4 m

and removal of the same for in-situ

concrete and plain concrete work in

(A) Foundations, footings, bases of

columns etc. and mass concrete.

Providing and Laying M25 using

minimum cement 345 kg/cum,

crushed stone aggregates 20 mm

nominal maximum size and

finishing smooth with curing etc.

complete including cost of form

work but excluding the cost of

reinforcement for reinforced

concrete work in..

( III ) Having cross sectional area

0.12 to 0.18 sqm

Providing and Laying design mix

concrete M25 using minimum

cement 345 kg/cum, crushed stone

aggregates 20 mm nominal

maximum size and finishing

smooth with curing etc. complete

including cost of form work but

excluding the cost of reinforcement

for reinforced concrete work in..

( II ) Having cross sectional area

0.08 to 0.12 sqm

Brick work using Flyash bricks

having crushing strength not less

11 126.00 than 50 kg/sq.cm. in foundation 4355.30 cum

and plinth in C.M.1:6 (1cement :6

fine sand) conventional bricks

Providing and Laying M25 using

minimum cement 345 kg/cum,

crushed stone aggregates 20 mm

nominal maximum size and curing

complete Incluidng the cost of form

work and excluding cost of

reinforcement for RCC work in

Providing & Applying Pre-

Construction Antitermite

13 389.90 Treatment as per IS 6313 (Part-2): 122.30 sqm

1971, including all required

methods and chemicals.

Providing and Laying design mix

concrete M25 using minimum

cement 345 kg/cum, crushed stone

aggregates 20 mm nominal

14 43.00 maximum size and curing complete 4860.80 cum

excluding the cost of form work and

reinforcement for reinforced

concrete work in

Providing and Laying design mix

concrete M25 using minimum

cement 345 kg/cum, crushed stone

aggregates 20 mm nominal

maximum size and finishing

smooth with curing etc. complete

including cost of form work with

steel sheathing but excluding the

cost of reinforcement for reinforced

concrete work in.

( III ) Slabs having more than 10 cm

and upto 13 cm thickness

Providing and Laying M25 using

minimum cement 345 kg/cum,

crushed stone aggregates 20 mm

nominal maximum size and curing

complete incluidng the cost of form

work and reinforcement for

reinforced concrete work in (C)

chhaja upto floor two level.

Providing and Laying design mix

concrete M25 using minimum

cement 345 kg/cum, crushed stone

aggregates 20 mm nominal

17 4.00 maximum size and curing complete 7976.40 cum

including the cost of form work but

excluding the cost of reinforcement

for reinforced concrete work in

(E) Staircases upto floor two level

Providing and Laying design mix

concrete M25 using minimum

cement 345 kg/cum, crushed stone

aggregates 20 mm nominal

maximum size and curing complete

excluding the cost of form work and

reinforcement for reinforced

concrete work in (B) Walls from

top of foundation level upto floor

Providing formwork of ordinary

timber plankings so as to give a

rough finish including

centering,shuttering, struting and

propping etc. Height of propping

19 1812.10 and centering below supporting 377.40 sqm

floor to ceiling not exceeding 4 m

and removal of the same for in-situ

concrete and plain concrete work in

(C) Vertical surfaces such as walls

(any thickness), partitions. etc.

Supplying, bending, hooking and

binding thermomechanically

treated (TMT) corrosion resistant

Fe-500 grade bar reinforcement

including placing in position etc.

complete upto floor two level.

Brick work using Flyash bricks

having crushing strength not less

than 50 kg/sq.cm. in super

structure upto floor two level in

C.M.1:6 (1cement :6 fine sand)

conventional bricks.

Half brick masonary in Flyash

bricks having crushing strength not

22 240.60 less than 50 kg/sq.cm.in C.M. 1:4 (1 616.20 sqm

cement : 4 fine sand)upto floor two

Providing and Fixing 35 mm thick

shutters for doors,windows and

clearestory windows incl indian

teak wood frames 12cm x 7cm size

23 61.60 incl stainless steel fixtures and 6886.90 sqm

fastenings incl primer coat of

approved quality and two coats of

oil painting etc complete( II ) Fully

Providing and Fixing fiber glass

moulded door frame, champhered

type of size125 x 65 mm having fire

extinguishing grade FRP skin of

to 2mm thickness with extra

reinforcement on sides and edges

and in "Gel" coat finish. Remaining

hollow portion is to be filled with

injected fire extinguishing grade

polyurethane foam (PUF), done in

situ along with embeded wooden

peices for stiffening and taking

hinges. In built holdfast

arrangement is to be provided for

fixing with masonary or RCC. Whole

section is to be waterproof, weather

proof, termite proof and mild acid /

alkali resistant.

Providing and fixing 30mm thick

ready made PVC rigid foam

panelled door shutters made from

M.S. tube of 19 x 19 mm,19 gauge

for styles and 15x15mm for top and

bottom rails, covered with heat

moulded PVC "C" channel of 5mm

thick sheet and 30x50mm wide to

form styles and 5mm thick and

75mm wide PVC sheets for top rail

and bottom rail on either side and

5mm thick, 20mm wide cross PVC

sheet as gap insert for top rail and

bottom rail, paneling of 5mm thick

PVC sheet fitted in the M.S. frame

welded/sealed to the styles and

rails with 5x30mm PVC sheet

beading on either side and joined

together with solvent cement

adhesive etc. complete as per

manufacturers specification and

direction of Engineer-in-charge

fixed to frames with 4 Nos. S.S. butt

hinges, S.S. screws, aldrops, handles

etc complete (For W.C. and

bathroom shutters).

Providing and Fixing 35 mm thick

shutters for doors,windows and

clearestory windows incl indian

teak wood frames 12cm x 7cm size

26 59.50 incl stainless steel fixtures and 6527.10 sqm

fastenings incl primer coat of

approved quality and two coats of

oil painting etc complete( II ) partly

pannelled & partly glazed 4mm th.

Providing and Fixing glazed

louvered glass windows and

ventilators with teak wood frame

27 5.40 10cm x 7cm size including 2 coats of 4916.30 sqm

oil painting and MS bars 16mm dia.

fixed at spacing not exceeding

100mm c/c etc. complete

Providing and Fixing MS Grills of

required pattern to wooden frames

of windows etc with MS flats at

28 1163.70 required spacings and frame 138.30 Kg

alround, square or round bars with

round headed bolts and nuts or by

screws ( A ) plain grills

Providing & Fixing in position

collapsible steel shutters with

vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x

5 mm size, top and bottom rails of

29 12.40 T- iron 40 x 40 x 6 mm, and 38 mm 8038.80 sqm

dia steel pulleys complete with

bolts, nuts, locking arrangements,

stoppers handles including

applying a priming coat of red lead

Providing 10 mm thick cement

plaster in single coat on walls for

interior plastering upto floor two

level and finished even and smooth

in cement mortar 1:3 (1 cement :

Providing 10 mm thick cement

plaster in single coat on ceiling for

interior plastering upto floor two

level and finished even and smooth

in cement mortar 1:3 (1 cement :

20mm sand faced cement plaster on

walls upto height 10 m above GL,

consisting of 12 mm thick backing

32 3387.30 coat of C.M. 1:3 (1 cement : 3 fine 477.50 sqm

sand) and 8 mm thick finishing coat

of C.M. 1:1 (1 cement : 1 coarse

sand) etc.comp.

Providing, throating or plaster drip

33 267.40 and moulding to RCC chhaja 52.00 Rmt

Providing and Laying polished kota

stone slab 25 mm thick flooring

over 20 mm (average) thick base of

34 162.40 cement mortar 1:6 (1 cement : 6 1126.00 sqm

coarse sand) laid over and jointed

with grey cement slurry including

rubbing and polishing etc.

complete.( all sides machine cut,

Providing and Laying Polished

Granamite vitrified tiles of size

x 600mm and 8mm thick of

approved make and colour having

homogeniouse materials in flooring

35 222.70 laid on 20mm thick average cement 779.40 sqm

mortar 1:3 (1 cement: 3 coarse

sand) or approved chemical

adhesive mortar in case of laying on

existing flooring and pointed with

white cement slurry.

Providing and Laying Polished

Granamite vitrified tiles of required

size and 8mm thick of approved

make and colour having

homogeniouse materials in

36 14.20 skirting, dedo etc. on 10mm thick 952.30 sqm

cement plaster 1:3 (1 cement:

coarse sand) or approved chemical

adhesive mortar in case of laying on

existing flooring and pointed with

white cement slurry.

Providing and laying 25 mm th.

Machine cut polished Kotah stone

slab for shelves & cooking

plateform green or blue with

37 9.80 polishing on both sides and stone 1126.00 sqm

should be in one pieces as per width

of cupboars incl. grooving and

fixing in wall & making good the

same etc. complete.

Providing and Laying ceramic tiles

6mm thick of approved make and

colour in flooring laid on a bed of

mm thick (avg) cement mortar 1:3

(1 cement : 3 coarse sand) finished

with flush pointing in white cement.

Providing and Laying ceramic tiles

6mm thick of approved make and

colour in skirting or dedo on 10mm

thick cement plaster 1:3 (1 cement:

3 coarse sand) and pointed with

white cement slurry.

Providing and laying integrated

cement & brick bat coba water

proofing treatment of required

thickness at terrace level/ roof with

proper vata i.e. treating the vertical

surface of the parapet wall unto

cms. height above finished level of

40 494.60 terrace including 10mm thick 1832.00 sqm

waterproofing cement plaster in

cement mortar 1:3 and china

mosaic fitting over it and finally

finishing the surface with white

cement slurry and proper slope.

Rate is including ten years

performance of guarantee bond

Distempering with dry distemper of

approved brand and manufacture

(two coats) and of required shade

on wall surfaces to give an even

41 1727.80 shade over and including priming 95.00 sqm

coat of whiting after throughly

brushing the surface free from

mortar dropping and other foreign

Distempering with dry distemper of

approved brand and manufacture

(two coats) and of required shade

on CEILING/SLOPING ROOF

42 501.80 surfaces to give an even shade over 103.70 sqm

and including priming coat of

whiting after throughly brushing

the surface free from mortar

dropping and other foreign matter.

Finishing wall with waterproofing

cement paint of approved brand

and manufacture and of required

shade on wall surfaces (two coats)

43 3387.30 to give an even shade after 96.30 sqm

thoroughly brushing the surface to

remove all dirt and loose powdered

material including curing etc.

Earthwork for embankment

including breaking clods dressing

with all lead and lift and including

watering rolling and consolidation

of subgrade in layers at O.M.C. to

44 8190.60 required dry density including 299.70 cum

filling the depressions which occur

during the process using power

roller 8 T to 10 T.

(C) From borrow area within

Construction of granular sub-base

by providing coarse graded

material of required grading,

spreading in uniform layers by

mechanical means on prepared

45 527.40 surface, mixing by mix in place 1051.00 cum

method with rotavator at OMC, and

compacting with vibratory roller to

achieve the desired density,

complete as per Clause 401 of

MORT & H specification.

Construction of dry lean cement

concrete sub-base over a prepared

sub-grade with coarse and fine

aggregate conforming to IS:383,

the size of coarse aggregate not

exceeding 25 mm, aggregate

cement ratio not to exceed 15:1,

aggregate gradation after blending

to be as per Table 600-1 of MORT &

H specifications, cement content

46 252.00 not to be less than 150 kg/cum, 2413.70 cum

optimum moisture content to be

determined during trial length

construction, concrete strength not

to be less than 10 Mpa at 7 days,

mixed in a batching plant,

transported to site, laid with a

paver, compacting with 8 to

tonne vibratory roller, finishing and

curing etc complete as per clouse no

601 of MORT & H specifications.

Providing and laying cement

concrete pavement of specified

thickness over a prepared sub-base

with concrete of Grade M40 using

OPC 43 grade cement minimum @

405 kg/cum, coarse and fine

aggregate conforming to IS:383,

maximum size of coarse aggregate

not exceeding 25 mm, mixed in a

batching and mixing plant as per

approved mix design, transported

to site, laid with a paver, spread,

compacted and finished in a

continuous operation including

provision of contraction, expansion,

construction and longitudinal

joints, joint filler, sealant primer,

joint sealant, debonding strip,

dowel bar, tie rod, admixtures

(super plasticizer) @ 0.4 % by

weight of cement, curing finishing

to lines and grades as per drawing

complete as per clause no. 602 of

MORT & H specification

(Reinforcement in form of dowel

bars, tie bars etc. to be paid

Providing and laying separation

membrane of impermeable plastic

sheeting 125 micron thick laid flat

without creases including cleaning

the sub-base using air compressor

Providing and Layig interlocking

cement concrete paver blocks

60mm thick of M30 grade of

approved make and shape

including leveling the base with

50mm thick sand bedding, laying

the paver blocks in pattern as

directed by the EIC, filling the joints

with sand including watering,

rolling and compacting with

appropriate tools and plants, all

conveyance including loading,

unloading of blocks etc.complete in

Providing, laying, spreading and

compacting graded stone aggregate

to wet mix macadam specification

including premixing the material

with water at OMC in mechanical

mixers, carriage of mixed material

by tipper to site, laying in uniform

layers by mechanical means in sub

base/base course on well prepared

surface and compacting with

vibratory roller to achieve the

desired density complete as per

Clause no. 406 of MORT & H

Water supply and sanitary

Providing and Fixing to wall ceiling

and floor 6.0 kg f/cm2 working

pressure polythelene pipes

(Printed ISI marked) of the

following outside dia . low density

complete with special flange

compression type fittings, wall clips

etc. Including making good the wall

ceiling and floor.

Providing and Fixing to wall ceiling

and floor 6.0 kg f/cm2 working

pressure polythelene pipes

(Printed ISI marked)of the

following outside dia . low density

52 30.50 complete with special flange 123.70 m

compression type fittings, wall clips

etc. Including making good the wall

ceiling and floor.

Providing and Fixing to wall ceiling

and floor 6.0 kg f/cm2 working

pressure polythelene pipes

(Printed ISI marked) of the

following outside dia . low density

53 171.00 complete with special flange 133.50 m

comlpression type fittings, wall

clips etc. Including making good the

wall ceiling and floor.

Providing and Fixing gun metal

check or non return full way wheel

( D ) 32 mm dia

Providing and Fixing chromium

plated brass half turn flush cock of

55 20.00 approved quality including fixing in 380.40 no.

pipe line complete.

( I ) 20 mm dia

Providing and Fixing wash down

water closet (European type/Anglo

indian type WC Pan) with integral P

or S trap including joining the trap

with soil pipe in cement mortar 1:1

(1 cement :1 fine sand) (seat and

cover to be measured and paid for

( a ) Vitreous china

( i ) In white colour

Providing and fixing plastic seat

and cover for wash down water

closet with C.P. Brass hinges and

rubber buffers.

(B) black plastic seat and cover

Providing and Fixing wash basin

with single hole for pillar tap with

CI or MS Brackes painted white

including cutting holes and making

good the same but excluding

fittings. (a) Vitreous china(ii) flat

back wash basin 550 x 400 mm size

in white colour

Providing and Fixing stainless steel

(non magnetic) l kitchen sink of

approved quality fitted with

kitchen platform excluding fittings.

(A) Size 45 x 40 cm

Providing and Fixing C.P. Brass

waste coupling for wash basin or

Providing and Fixing M.I. fisher

61 13.00 union for wash basin or sink. (B) 40 97.40 m

Proiding and Fixing 15 x 15 cm

62 20.00 stainless steel grating for gully, 31.30 no.

floor or nahni trap

Providing and Fixing screw down

bib tapes of the following size.

63 16.00 ( A ) Brass screw down bib polished 291.70 no.

( I ) 20 mm dia C.P.

Providing and Fixing pillar tap

capstan head screw down high

pressure lettered "HOT" or "COLD"

with long screws, shanks and back

nuts of following nominal bore

( B ) 20 mm dia

Providing and Fixing ball cock of

65 5.00 approved quality as directed 262.70 no.

( A ) copper metal, 32 mm dia

Providing and Fixing polythelene

66 4.00 rain water spout of 75 mm dia and 113.20 no.

Providing and Placing on terrace or

where directed, readymade

Polyethylene water storage tank of

67 9500.00 approved make with manhole lid 7.10 Ltr

including making connections for

inlet, out let and overflow pipe and

testing etc. complete

Providing and Fixing PVC flushing

tank 12.5 litre capacity of approved

quality with all accessories

68 9.00 including making inlet and out let 1326.50 no.

connections etc complete.( Inlet

and outlet pipe to be paid for

Providing and fixing two way bib

taps of Jaquar : FLR 5041 N / Cera /

Benelave or equivalent make

69 9.00 following size complete as directed 1601.00 no.

by EIC / Architect '(A) Brass screw

down bib taps polished bright

Providing & fixing hand shower

health faucet of a brass body with

wall hook and 1.5 m hose of Jaquar

: ALD : 573 / Cera / Benelave or

equivalent complete as directed by

Providing and Fixing to wall ceiling

and floor 6.0 kg f/cm2 working

pressure polyethylene pipes

(Printed ISI marked) of the

following outside dia . Low density

complete with special flange

compression type fittings, wall clips

etc. Including making good the wall

ceiling and floor.

Providing and Fixing to wall ceiling

and floor 6.0 kg f/cm2 working

pressure polythelene pipes

(Printed ISI marked) of the

following outside dia . low density

complete with special flange

comlpression type fittings, wall

clips etc. Including making good the

wall ceiling and floor.

Providing and supplying of class

SN8 structured wall polyethelene

piping systems (pipe with online /

offline coupler and elastomeric

sealing ring) with non-smooth

external annular corrugated and

smooth internal surface (Double

Wall) for non-pressure

underground sewerage & drainage

application as per EN:13476-3

including all local and central taxes,

transportation, freight charges,

octrol, inspection charges, loading,

unloading, conveyance to the

departmental stores etc. complete

Providing and supplying of class

SN8 structured wall polyethelene

piping systems (pipe with online /

offline coupler and elastomeric

sealing ring) with non-smooth

external annular corrugated and

smooth internal surface (Double

Wall) for non-pressure

underground sewerage & drainage

application as per EN:13476-3

including all local and central taxes,

transportation, freight charges,

octrol, inspection charges, loading,

unloading, conveyance to the

departmental stores etc. complete

Providing and Fixing S.W. Gully trap

with C.I. Grating, brick masonary

chamber and water tight C.I. Cover

with frame of 300 mm x 300mm

size (inside) with standard weight)

( I ) Square mouth traps

( B ) 150 x 150 mm size 'P' or 'R'

Providing and Fixing S.W. Gully trap

with C.I. Grating, brick masonary

chamber and water tight C.I. Cover

with frame of 300 mm x 300mm

size (inside) with standard weight)

( I ) Square mouth traps

( B ) 150 x 150 mm size 'P' or 'R'

Providing and fixing RCC cover with

frame for inspection chamber, light

duty LD-2.5, conforming to IS

12592 : 2002, having steel fibres as

additional reinforcement and

following specifications :

77 2.00 (II) Size of 781.30 no.

( III ) Opening in frame .........600 x

(IV) Size of rectangular

( V ) Approx. weight of set....90 kg

Providing and fixiing RCC cover

with frame for manholes, medium

duty MD-10, conforming to IS

12592 : 2002, having steel fibres as

additional reinforcement and

following specifications :

( III ) Opening in frame .........560 mm

( IV ) Size of circular cover....670

mm dia x 70mm thick

( V ) Approx. weight of set....152 kg

Providingh and Fixing to wall

ceiling and floor 6.0 kg f/cm2

working pressure polythelene

pipes (Printed ISI marked) of the

following outside dia . low density

79 68.30 complete with special flange 145.90 m

comlpression type fittings, wall

clips etc. Including making good the

wall ceiling and floor.

Providing and Fixing gun metal

80 6.00 check or non return full way wheel 854.80 no.

valve. ( D ) 40 mm dia

Providing and Fixing uninal of

approved quality including

connecting the urinal with waste

pipe, trap etc. Complete.

( A ) white earthenware flat or

corner type size 430 mm x 260 mm

Providing & fixing in position

mm thick mirror polished

telephone black granite slab for

Urinal partitions machine cut,

cm high x 60 cm deep, rubbed and

polished with edges, corners,

rounded off including making

necessary chases in the walls and

fixing the same with cement

concrete 1 : 2 : 4 ( 1 cement :

coarse sand : 4 graded stone

aggregate of 6 mm nominal size)

and finished smooth with white

cement with mixed with pigment to

match the shade complete as

directed by EIC/ Architect

Providing and Fixing gun metal

check or non return fullway wheel

( F ) 50 mm dia

Providing and supplying of class

SN8 structured wall polyethelene

piping systems (pipe with online /

offline coupler and elastomeric

sealing ring) with non-smooth

external annular corrugated and

smooth internal surface (Double

Wall) for non-pressure

underground sewerage & drainage

application as per EN:13476-3

including all local and central taxes,

transportation, freight charges,

octrol, inspection charges, loading,

unloading, conveyance to the

departmental stores etc. complete

Construction of inspection chamber

90 cm x 60 cm up to 0.90 m depth

23 cm thick brick masonary in CM

85 3.00 (1:5) (1 cement : 5 sand ), Inside 7927.30 no.

plaster 10mm thick in CM (1:3)

with a floating coat of neat cement

slurry and bed concrete 1:3:6,

cm thick excluding CI Airtight

manhole cover and frame.

Excavation for foundation upto

1.5m depth including sorting out

and stacking of useful materials and

disposing of the excavated

stuffupto 50 metre lead.

(A) Loose or soft soil.

Providing and Laying CC 1:3:6 (1

cement :3 coarse sand : 6 crushed

stone aggregate 20mm nominal

size) and curing complete including

cost of form work in. (A) Wall caps/

coping/foundation/plinth beams

Providing and Laying design mix

concrete M25 using minimum

cement 345 kg/cum, crushed stone

aggregates 20 mm nominal

maximum size and finishing

88 3.60 smooth with curing etc. complete 7666.50 cum

including cost of form work but

excluding the cost of reinforcement

for reinforced concrete work in..

( IV ) Slabs having more than 13 cm

and upto 15 cm thickness

Brick work using common burnt

clay building bricks having crushing

strength not less than 35 kg/sq.cm.

in foundation and plinth in C.M.1:6

(1cement:6 fine sand) conventional

Providing 10 mm thick cement

plaster in single coat on walls for

interior plastering upto floor two

level and finished even and smooth

in cement mortar 1:4 (1 cement :

Providing 10 mm thick cement

plaster in single coat on Ceiling for

interior plastering upto floor two

level and finished even and smooth

in cement mortar 1:3 (1 cement :

Providing and Fixing CI cover with

frame for manhole,valve chambers

92 3.10 etc including all materials, painting 8728.90 q

complete as per design and pattern

Providing and supplying of class

SN8 structured wall polyethelene

piping systems (pipe with online /

offline coupler and elastomeric

sealing ring) with non-smooth

external annular corrugated and

smooth internal surface (Double

Wall) for non-pressure

underground sewerage & drainage

application as per EN:13476-3

including all local and central taxes,

transportation, freight charges,

octrol, inspection charges, loading,

unloading, conveyance to the

departmental stores etc. complete

Providing and fixing cast iron spigot

94 3.60 socket soil waste and ventilating 985.10 m

size 100 mm dia

Excavation for foundation for depth

from 1.5 m to 3.0 m including

sorting out and stacking of useful

materials and disposing of the

excavated stuff upto50m lead. (C)

Excavation for foundation for depth

from 3.0 m to 5.0 m including

sorting out and stacking of useful

materials and disposing of the

excavated stuff upto50 m lead. (C)

Extra for additional depth more

than 5.0m for excavation for

foundation including sorting out

and stacking of useful material

disposing of the excavated stuff

upto 50m lead. (C) Hard murrum

Filling in foundation and plinth

with brick bats/chara in layers as

98 23.40 directed including watering, 801.30 cum

ramming and consolidating

Providing and fixing cast iron spigot

and socket soil waste and

ventilating ipes (1.8m long) of 75

Steel work welded in built up

sections, framed work including

cutting, hoisting fixing in position

and applying a priming coat or red

lead paint (A) In beams and joists,

channels angles, tees, flats with

connecting plates or angle cleats as

in main and cross beams, hip and

jack rafters, purlins connected to

common rafters and the like.

(Cosider squaring palte size =

600x600x20thk.)

Electrical Works

Point wiring for Light / Bell with 2-

1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires

up to 10 mtr length , in below type

of pipe erected with 6A Modular

type switch / bell push &

101 107.00 accessories and earth continuity of Pt

following type, erected on PVC /

Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate

modules erected on / in wall /

ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.

(a) with medium class Rigid PVC

pipe and accessories erected

flushed on wall/ceiling complete

For point wiring in bathroom and

W/C and washbasin area in

102 17.00 residential quarters reduce overall Pt.

rate by 50% of point wiring for

Point wiring for FAN with 2-1.5

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr

length, in below type of pipe

erected with 6A Modular type

switch and hum free EME step type 663.00

electronic fan regulator mounted

and accessories with earth

continuity of following type erected

on PVC / Metallic/Wooden box,

single mounting base frame

textured/metallic/white front

plate modules erected on / in wall /

ceiling as per pipe erected. with

necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC

pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for Individual Plug

with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked

KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr

length, in below type of pipe

104 24.00 erected complete with Modular Pt

type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box

covered with appropriate front

plate modules erected on / in wall /

ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug and 6 a switch with

2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(a) with medium class Rigid PVC

pipe and accessories erected

flushed on wall/ceiling complete

[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from

mcb db board.(a) with medium

class Rigid PVC pipe and 742.00

accessories erected flushed on

wall/ceiling complete Cat. III

[III] For 16A Plug and 16 amp

switch with 2-4 sq.mm Cu. Wire

with 2.5 sq.mm ( green) earthing

106 14.00 wire from mcb d b board.(a) with Pt.

medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for on board Looped

Plug with 6A Modular type switch &

5 pin socket erected on PVC /

Metallic/Wooden box, single

107 50.00 mounting base frame covered with Pt.

textured / metallic/white front

plate modules erected on / in wall

/ ceiling with following type

accessories Cat. III

Providing following type of

Modular Type Accessories mounted

with PVC / metallic/Wooden box,

single mounting base frame

108 5.00 covered with textured / Nos.

metallic/white front plate

modules erected with necessary

connections as per site situation

directed by Engineer In charge.

(4) TV Co-axial Socket outlet Cat III

(7) Blank Plate Single Cat.III

(8) Computer RJ-45 socket Cat.III

Providing and erecting ISI mark

Medium class RIGID PVC PIPES of

following size complete to be

erected on/in wall or ceiling

111 80.00 erected with necessary PVC fittings Mtr

& Junction boxes fixed with

adhesive solution & Clamps with

following dia of pipes, in approved

manner as directed

Providing & erecting PVC

Corrugated lexible Conduit with

113 35.00 required nos. of coupling, PVC Mtr.

bushes, Check-nuts etc. complete of

following sizes. (2) 25 mm

Supplying & erecting UPVC Mini

trunking (PVC Casing-n-Capping)

having double-locking

arrangement with grooves,

trunking of size not below 12.5 mm

in height as per IS with accessories 34.00

of PVC/Resin polypropylene not

below 1.8 mm thick duly sealed in

joint & erected on wall / ceiling of

following size. (2) 25 mm

Supplying and laying UPVC cable

trunking system comprising

unplasticised polyvinyl, chloride

rigid material with ignition free and

flame proof confirming BS with

necessary end caps Internal and 310.00

external bend, flat bends, coupler,

tee etc..All necessary accessories

and measuring of following sizes

(1) 75 mm x 50 mm trunking

Providing and erecting Mains with

1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor

wire in following type of pipe to be

erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC 90.00

insulated stranded wire of green

colour for earth continuity of

following size (A) With medium

class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

Providing and erecting Mains with

1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor

wire in following type of pipe to be

erected in / on wall / ceiling with

117 215.00 2.5 sq. mm copper conductor FRLS Mtr

PVC insulated stranded wire of

green colour for earth continuity of

following size (A) with medium

class Rigid PVC pipe and

accessories a) 2 wire 4 sq. mm

(a) with medium class Rigid PVC

118 50.00 pipe and accessories Mtr

(b) 2 wire 6 sq. mm

Supplying and erecting Flexible PVC

insulated multistrand multicore

kv grade ISI marked copper wires of

following size to be erected as 51.00

directed. e) 1.50 Sq.mm 3 core

round PVC sheathed

Providing & erecting Approved

make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI

mark with Condenser 230 volt A.C.

50 Hz 1200 mm sweep complete

having 3blades with aluminium 2,070.00

blades with , canopy & 30 cm. down

rod erected with earthing.(Make

shall be approved by Engineer in

Supplying & erecting fan hook box

of 10 mm M.S. round bar bounded

to the RCC bars up to 50mm length

121 27.00 each side and pierced through a 16 Nos

Gauge M.S. box / Heavy Duty PVC

box complete erected concealed in

Ceiling with necessary finishing.

Providing 2.5mm.thick laminated

122 27.00 acrylic sheet to cover the fan hook Nos

Supplying and erecting 19 / 20 mm.

nominal bore Medium Class M.S.

Pipe down rod erected duly painted

for fan complete with proper 125.00

insulation without leakage and

Supplying & erecting single phase

approved make industrial exhaust

fan suitable for medium duty ring

124 1.00 mounted low noise operation No

suitable for medium duty having

following dia size and maximum

A] 305 mm dia 900 RPM Cat.II

Providing suitable M.S. louver

125 1.00 shutter of the Exhaust fan. No

Providing window frame suitable

for erection of Exhaust fan

complete covering the remaining

portion of window with 15 mm. 200.00

thick plywood and colour washing

to match the colour of the wall.

Providing & Erecting approved

make following size of TV Co-axial

flexible cable comprising inner

conductor of solid bare copper

insulated with Foam PE &

Secondary conductor made of poly - 43.00

Aluminium film bonded Al. Braids

@ suitable coverage overall

sheathed with black PVC insulation.

Supplying & erecting approved

make LAN cable of following size in

existing pipe as per direction [D] 84.00

Providing & erecting Switch board

for Computer or electric apparatus

consisting of following modular

type accessories mounted with PVC

/ Metallic concealed/open box with

single mounting base frame 1,262.00

covered with textured/metallic

/white front plate,modules erected

with necessary connections as

1 no. 6A/16A universal plug-switch

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular

Type Accessories Cat. III

Decorative call bell Ting-tong box

130 5.00 type 250 volts complete erected Nos

Providing Approved make Triple

Pole Metal Clad Switch Fuse Unit

131 2.00 415/500 V. with HRC fuse of Nos

suitable load and neutral link

confirming to IS. (b) 63 A. Cat III

Providing and erecting Approved

make Four pole moulded case

circuit breaker having breaking

capacity ICU of 25 KA. at

V,having normal current rating up

to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work 7,210.00

on A.C. supply 50 c/s. with all

internal connections, spreader

tinned copper & complete erected

in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Add Rs. 10% extra for

133 1.00 housing/Encloser of MCCB for Item No

Providing and erecting Miniature

circuit breaker single pole 6A to

25A suitable to operate on 240 V

134 80.00 A.C. system and having breaking Nos

capacity 10 KA to be erected in

existing box. confirming to IS

8828/1996 with ISI Mark Cat. III

Providing & erecting 240 V MCB

double pole switch for lighting Load

(B Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in 325.00

existing box having following

1 (A) 6 to 32 Amp. Cat III

Providing & erecting 240 V MCB

double pole switch for lighting Load

(B Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in 345.00

existing box having following

capacity (B) 40 Amp. Cat.III

Providing and erecting Sheet Steel

powder coated MCB distribution

board - flush / surface mounted

fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to

without MCB to house appropriate

nos. of MCBs.(The DBs should be

used of same company of MCB to be

used) suitable for

(A) single phase incoming and

horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(B) three phase incoming and single

phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet 3,986.00

steel double door (iii)8 way

Supplying KITKAT pattern

porcelain cut-out fuse with base of

139 6.00 following current capacity erected Nos

on existing block board. (v) 100 A.

providing and erecting Approved

make RCCBs conforming to IS:

12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 10 KA and suitable for

operation on single phase

140 4.00 V,50Hz. having characteristic of Nos

quick action & tripping with all

advance feature & do not

incorporate any electronic

component. for following Max.

rating erected as directed (ii)

40Amps. DP Cat III

Providing & erecting 415V MCB

Four Pole Switch for Lighting Load

(B curve) having 10KA breaking

capacity & confirms to IS :8828 in 745.00

existing box having following

capacity (b)40 Amp. Cat III

Supplying & erecting approved

make RCCB + MCB (Electro

magnetic type only) working on

residual current device having 6 KA

short circuit breaking capacity and

30 mAmp. Sensitivity & 30 mili sec.

142 3.00 tripping time conforming to IS Nos

12640 test knob facility trip free

mechanism operating for rated

leakage at nominal ten volt,

complete erected including all

materials lugs screws etc.

[e] 32A to 40 A, 4 Pole Three Phase

Providing & erecting Medium

Voltage Danger Notice Board

143 25.00 sticker as per language suggested Nos

by engineer incharge of standard

size as per IS-2551

Providing and erecting Annealed

bare Copper wire 8 to 16 SWG. 928.00

Providing and erecting HOT deep

145 30.00 Galvanised iron strip wire 8 to 16 KG

Providing and erecting Pipe type

earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe

146 25.00 with coupling and buch buried in Nos

specially prepared earth pit

complete with necessary 8 SWG

For using salt and charcoal / coke as

147 25.00 required for pipe type earthing. Nos

Supplying & erecting earth pit of

minimum bore dia.150mm size

approved make Earthing Electrode

consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm

having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having

200-250 Micron galvanising,

connection terminal dia of 12mm

with constant ohmic value

surrounded by highly conductive

compound with high charge

148 12.00 dissipation suitable for following Nos

type of applications with chamber

and heavy duty cover.(approved

make OEM has to submit test

certificate) & having back filling

compound of (B) Inner chemical

(CCM Compound)- Resistivity:-

W/ meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:-

<2%(C) Back fill Compound :-

Earthing compound should be

capable to retain moisture for long

time Necessary test report must be

(a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag

Add Extra for excavation in Semi

hard rock (Murrum) by dry and wet

blasting and chiselling for pipe type 130.00

Supplying and erecting LED indoor

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used as

a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/ aluminium die cast 480.00

powder coated and high U.V. &

corrosion resistance with diffuser

with company mark/name 160V to

270V, Power Factor more than 0.9,

CCT 3000 K to 6500K,

Luminaire efficacy>

lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED

fittings.The Engineer incharge may

select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

Supplying and erecting led lamps

with following wattage capacity of

220 to 240 voltage, minimum

15000 burning hours life, 500 V in

built-surge 145.00

protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 /

B22 lamp holders, pf >=

(A) LED Lamps integral type, with

PC diffuser suitable LAMP holder

(ii) 5 to 8 watts Cat-lll

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor

152 900.00 for 1.1 KV. to be laid on wall with Mtr

necessary clamps or in existing

trench / pipe of following size of

(B) 4 core 25 Sq. mm

Making trench in Hard Murrum /

Tar Road of suitable width of

cms or required depth for laying

153 450.00 any size of cable or locating the fault Mtr

all over the run and back filling the

same and making the surface as

(B) If additional machineries like

154 450.00 hammer driller or JCB use [Add] Mtr

Civil work for Man-hole work as

per Drawing No.-02. The Contractor

has to carry out the Manhole with

Brick, and Both Side Plastering and

Hevy Manhole Cover as required by

the electcial department and the

155 4.00 complete work for entire Manhole Nos

as per rules and regulations and as

per the guidelines of Client civil

department. The contractor has to

get approval from electrical

department as well as civil

department fo GMB

Providing and erecting XLPE

(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor

156 300.00 for 1.1 KV. to be laid on wall with Mtr

necessary clamps or in existing

trench / pipe of following size of

(b) 4 core 6 Sq. mm

Providing and, fixing heavy duty

flange type brass cable gland with

rubber ring for PVC insulated

armoured cable complete with out 43.00

going tails, insulating tape etc for

following size of cables.

(B)2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty

flange type brass cable gland with

rubber ring for PVC insulated

armoured cable complete with out 76.00

going tails, insulating tape etc for

following size of cables.

(A) 3 & 1/2 / 4 core 25 Sq. mm

Solderless crimping type

Aluminium lugs conforming to IS

suitable for cable of following size

evenly crimped with high pressure

tool & connected to switchgear 6.00

terminals with brass/cadmium

plated nut bolts in an approved

manner. (A) 1.5/ 2.5/4/6 Sq.mm

Solderless crimping type

Aluminium lugs conforming to IS

suitable for cable of following size

evenly crimped with high pressure

tool & connected to switchgear 17.00

terminals with brass/cadmium

plated nut bolts in an approved

manner. (C) 16/25 Sq.mm

Supplying and erecting approved

make Octagonal pole made from HR

sheet steel. The pole should be

made as per IS. and shall be coated

with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend

local wind speed with integral

161 25.00 Junction box consist of terminal Nos

plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm

Din-Rail for MCB Mounting, stud

type terminal and arrangement for

cable termination to be erected

With Suitable foundation

(Included) as per details given by

manufacturer considering site

(D) 6 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base

plate, 4-M20 Bolts and 600mm long

J-Bolt.Approx Pole weight 59 kg

Supplying and erecting Street light

pole bracket comprising main B

Class MS pipe of 4.2 cm/require

outside dia. complete with suitable

B Class M.S. sleeve tubing of approx.

45cms.length and suitable for

76.5mm/80mm/require size of

pole top having nuts and bolts for

162 38.00 fixing the brackets and having Nos

spread of 0.5 mtr. Length with

deg.with vertical plane and suitable

welded stiffener reducer and nipple

with check nut complete painted

with one coat.of Red oxide / PU

base primer and two coats of

Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm bracket 0.5 Mtr

Supplying and erecting LED street

light / Flood light fittings with High

power White LEDs wattage of

Watt and above assembled on

single MCPCB, efficiency more than

130 lm/w and corrosion free High

pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

163 38.00 aluminium with diffuser and Nos

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45,

Luminaire efficacy>

lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED

fittings.The Engineer incharge may

select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light

must have 440VAC line supply with

over-voltage protection.

(iv) above 90 to 120 watts cat-III

(C) Post Top Lantern LED fitting

comprises of finish cast aluminium

spigot and spun aluminium canopy

fixed with opal polycarbonate, pipe

arrangement for vertical mounting 5,300.00

driver and accessories wired upto

terminal block. IP 65 (i)20- 30W

Supplying & erecting approved

make SMC press moulded

composite FRP. loop-in, loop-out

approx. 2mm thick box complete

with Bakelite connector strip

5way(3P+N+E),DIN rail for

165 20.00 mounting mob & hinged doors as No

per requirement having locking

arrangements with mounting

clamp with nuts, bolts & washers

suitable for erection on pole with

cable clamps& earth bolt of

following size of box.

15A. 10 way bakelite connector

166 42.00 duly erected on existing board. Nos

Supplying following size of Light

duty “A” Class G.I. Pipe & erecting as

directed by Engineer-in-charge. (D) 813.00

Providing & laying. R.C.C. hume

pipe for cable to be laid 90 cms.

below ground across the road

168 100.00 crossing or on floor with necessary Mtr

material in an approved manner

and making the ground as per

(D) 250 mm dia.

Providing & laying approved make

Double walled corrugated pipes

(DWC) of polyethylene(conforming

to IS 14930 II )with necessary

169 900.00 connecting accessories of same Mtr

material at required depth in

existing trench for laying of cable.

below ground / road surface for

enclosing cable (A)50 mm outer dia

Providing & erecting weather proof,

dust & vermin proof, floor mounted

front operated indoor type cubical

panel board necessary IP-42 and

above protection as per approval

from engineer incharge made from

14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick

CRC M.S.sheet for internal

partitions with necessary

accesories , supporting angles/ flats

channel including cutting, bending,

drilling, welding, riveting with

internal partitions & cable alley as

per requirements & instruction of

engineer-in-charge with erection of

supplied switch gears, BUSBARS,

suitable size of inter connecting SQ.MT

PVC copper wire / copper- 22,650.00 R

aluminium strips, rubber

grommets, rib, bakelite control

fuses/MCB for measuring

instruments, earth bus & earth

bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged

doors, handles with locking

arrangement and rubber gasket,

heavy duty end terminal

connection, danger notice board,

necessary ventilation, earthing

strip complete. The Panel shall be

painted with epoxy powder

coating.(The rates excludes the cost

of switchgears, bus bars, inter

connecting mains & Copper

Aluminium strips, meters, Fuses

etc. The dimension shall be

measured excluding base beams)

The panel shall be supplied with

following approved manufacturers

with following size. (B) The

standard companies switch gear

shall be used and only

manufacturers at CPRI approved

factory (ii) with 550 mm. Depth

Supplying and erecting triple pole &

neutral 440V / 500V panel

mounting Copper Busbars with four

equal Nos. of electrolyte bus having

current density not more than

Amp. / sq.mm (Rated current /

cross section area) duly wrapped RN.MT

with colour insulating tape for 2,290.00 R

phase sequence of following

current carrying capacity, erected

with necessary bus bar supports

/insulators, main cable socket to

each bar, erected in existing cubical

panel with necessary connections.

(A) Suitable for 100 Amp. Capacity

Providing and erecting Mains with

ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper

conductor with heat resistant PVC

insulated conforms to IS 694, IEC -

227 erected in existing pipe of

following size (Specifically for 101.00

control panel, relays, power

switchgears, motor starters &

control wiring) with required size

of copper lugs, nuts and bolts if

required. (f) One wire 10.00 sq. mm

Supplying and erecting HYLAM

sheet on existing angle iron SQ.MT

frame.for following thickness (F) 2,700.00 R

Supplying and erecting approved

make Analog type voltmeter

moving iron with square/ Round

174 4.00 Dial, flush/pedestal mounting Nos

pattern for A.C. Voltage 0 to

Volt range, erected on panel board

with all connection, wiring etc.

Supplying and erecting approved

make Analog type moving iron

Ammeter direct reading type 0-30A

175 4.00 AC current, 500 V square /. Round Nos

dial, flush or projection type

complete erected with connection

Supplying and erecting Ammeter /

Voltmeter selector switch for

176 8.00 phase AC Supply 500 V on existing Nos

panel board with necessary

Supplying and erecting approved

make suitable panel indicator LED

177 4.00 type lamp, lens cover, complete Nos.

erected with necessary

Supplying & erecting directly

operated single phasing preventer

complete erected and connected to 1,260.00

supply up to 45 Amp. Range.

Supplying & erecting approved

make Digital time switch having

lithium cell 6 years operative and

179 3.00 operate battery backup 1 channel Nos

day clock with 14 memory

programme, suitable to operate on

5%, 16A with, floating contacts

Minimum switching setup time

minimum & LCD display. Also

comprised permanent ON/OFF

switching. Programming switches

& housed in fire proof

thermoplastic enclosure &

transparent cover erected as

required with necessary

connection erected as directed.

Providing and erecting AC-3 duty

pole power contactor with 2 NO &

NC aux contacts complete with

415V/220V operating coil suitable 3,800.00

for (L&T, BCH,T.C., Siemens, C&S

make). (a) for 25 / 32 A rating

Providing & erecting open well

horizontal mono block pump set

181 1.00 with cast iron body, complete for No

three phase submersible motor

[C] For 3 HP 3 phase open well

horizontal mono block pump set

suitable for 85 LPM to 270 LPM @

11 mtr to 33 mtr head suitable for

50/65 mm dia delivery pipe Cat.II

Supplying and erecting Direct-on-

line, Starter with 15A.rating

contractor and with 4-14A. range,

directly operated thermal overload

182 2.00 relay in sheet steel enclosure for Nos

3phase 415V.50 c/s. A.C. motor up

to 7.5 H.P.complete erected on P.W.

Block with necessary connection.

Providing and erecting ISI marked

PVC insulated PVC Sheathed Flat

flexible Submersible copper cable 120.00

approved make of following Size.

(b) 3 Core x 2.5 Sq. mm.

Supplying submersible pump set

suitable for bore of 100 mm. dia. or

more having three phase motor

capacity not more than 3 H.P. of 20,350.00

different range with following

(A) (20 stage) 170 to 185 LPM

discharge at 57 to 48 mtrs.

Respectively head suitable for

mm dia. delivery pipe Cat. III

Lowering of submersible motor

pump set at the depth of following,

complete with required. Nos. and

size of casing pipes erected by

185 1.00 means of proper chain pulley block Job

& pipe wrenches after checking of

threads of each pipe with coupling

to take the load of the pump set and

pipe assembly filled up with water.

(b)Above 60 mtrs. and Up to

Supplying rubber matting of

186 4.00 following thickness as per

IS:15652/IEC 61111 (c)12mm

Supply of Fibreglass Step Trestle (A

187 1.00 Type) Ladder - 6 FT having No

following specifications :

It should have heavy gauge steel

hinges suitable for industrial

application ,inside Spreader Braces,

Aluminium Feet with thick rubber

tread, nonconductive Full channel

Fiberglass,two pairs of gusset

support at the bottom step and All

gussets are heavy duty steel. It

should have steps on both the sides

for climbing. Capacity : 300 lbs."

Step Width : 3” Bottom Width:23”

Spread : 52”Approx.Wt.:13 Kg

Approx. Cube : 6.53’

Supplying & erecting D.C.P. type fire

extinguisher for following capacity

cartridge type with gun metal cap

150 gram CO2 gas cartridge,

powder and brackets confirming to

IS 2171 1985 and complete erected 2,000.00

with necessary clamps made from

50 x 6 mm M S Flat with nuts and

bolts grouted in wall complete. [A]

For 5 Kg Capacity

Supplying & erecting carbon

dioxide (CO2) fire extinguisher user

of following capacity with

189 4.00 necessary clamps made from 50 x 6 Nos

mm M.S. Flat with nut & bolts

grouted in wall complete. [A] For

4.5 Kg Capacity

Providing and erecting water cooler

having storage capacity 80Ltr. &

cooling capacity 40 Ltr. per hour @

an ambient temp of 45˚ C. The outlet

temp. of the water should drop by

15˚ C within a hour, The water

cooler should be comprising of

190 1.00 hermetically sealed compressor, No

fan motor, condensing unit, water

tank surrounded by evaporating

coil, thermostats, relay etc.

complete with necessary inlet &

outlet connection. The body of

water cooler will be made from

Stainless Steel.

Supplying & erecting 5 stage single

reverse osmosis water purification

system with M.S. powder coated

frame, prefilter housing with 'O'

ring presediment filter GAC filter,

carbon filter suitable buster DC

pump capacity 80 psi, mention with 15,250.00

40 psi inline type post carbon filter

auto low & high pressure switches

with following size of storage tank

& LPH capacity & erected as

[B] 25 Ltr / Hr with 30 Ltr. Storage

Supplying and erecting approved

make single phase servo controlled

voltage stabilizer suitable for input

voltage range 180/25OV. And 7,950.00

output voltage range 225/235V.

A.C. complete erected. (B) 3.0 KVA

Supplying & erecting approved

make Electronics Starter and relay

for air conditioners in ABS plastic

moulded housing. Company

193 5.00 fabricated with bakelite terminal Nos

for connection with silver coating

bimetallic contact in switching

device for o/p with following

(1) Low Voltage Protection below

(2) High Voltage protection above

(3) Overload protection for 2-5, 4-

(inverse time chara-)

(4) Indicating LEDs for AC on LV,

(5) With unique feature of 3 minute

Supplying of following size of

194 100.00 STANDARD UPVC column pipe with MTR

coupler and wire lock [C] 40 mm dia 258.00

Providing and erecting Inverter

based approved make split air-

conditioning unit consisting of

condensing unit with variable

speed fan motor, inverter type

hermetically sealed rotary

compressor with accessories etc.

duly connected separately erected

evaporating unit and blower motor

195 1.00 with its accessories by means of No

extra supplied proper insulated

copper tubing,drain PVC pipes

suitable for ( cost includes Eco

Friendly green gas charging and

15A plug top & Remote Control &

MS Stand) with necessary core

cutting. (1)For 3 Star Rating of

current year (B) for 1.5 ton

capacity - Premium Cat.

Supplying & erecting approved

make Four Pole 415V change over

switch interior for panel mounting

with operating mechanism A.C.23 9,100.00

duty confirming to IS for (C)100-

Supplying and erecting,

commissioning and testing of Diesel

Generating set confirming to latest

IS & CPCB IV+ Norms having

continuous rating, 3 phase,

volts, 50 cycles A.C. supply

comprising of a totally enclosed

air/water cooled diesel engine with

multi-cylinders developing suitable

BHP not less than following

197 1.00 capacity at 1500 RPM with 10% No

overload for one hour in 24 hours

with standard accessories with

SITC of 2 Nos. 50mm,3 Mtr. copper

Bonded chemical earthing with

require chemical compound &

Nos. 50mm,3 Mtr. GI chemical

earthing with require chemical

compound & with obtaining all

necessary certificate from Electrical

Supplying & erecting approved

make low noise decorative exhaust

198 9.00 fan having square frame ABS body Nos

with inbuilt lower & square frame

1) 200mm with 1350RPM Cat.II

Total tender value

I/We am/are willing to carry out the work at… % above/below percent

(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item

at the rate of input rate mentioned in all the tender.