Dhari Khairni Govt Pumping Water Supply Scheme

Amount

Designing, Providing, Constructing, Hydraulic testing, commissioing and giving satisfactory dicharge of 450 lpm, clear water capacity, 6.0m dia and 9.0 m mimimum depth Infiltration well with all apurtents works as per type approved design and drawing.

Supply of all Materials , Labours ,T&P etc. and Construction of RCC Reservoir of following capacities (In Kiloliters) supply and fixing of outlet, inlet, overflow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body, vertical pipe, ladder M.S M.H. cover , ventilator column etc. Complete with approved water proofing ( apex)/ enamal paint, testing, filling water for testing purpose etc. including supply of verticle pipes and specials assuming bearing capacity as 8MT/M2 .

RCC Sump 10KL

RCC Sump 12.5KL

RCC CWR 17.50 KL

RCC CWR 22.5 KL

RCC CWR 25.0 KL

RCC CWR 27.5 KL

RCC CWR 210 KL

Supply of all Materials, Labours,T&P etc. and Construct a Pump House With Size (3.50 m x 4.50 m x 3.60 m) along with attendent Room cum Chloronome in size (2.50 m x 1.30 m) as per Approved Design and Drawings, including Cost of all Labour & Fitting all Complete.

Pump House With Size (3.50 m x 4.50 m x 3.60 m)

Supply of all Materials , Labours ,T&P etc. and Construct Following Staff Quarter as per Design and Drawigns, Including Cost of all Labour & Fittings all Complete Type -I , Single Room Staff Quarter including Kitchen ,W/C ,Bath etc Complete.

Supply of following sizes MSERW pipe conforming to IS 1978-1982 , YSt 210 grade , carting to site of work ,cutting of pipes , to make suitable length according to site conditions and for fabricating bends of suitable size and angle by Gas cutter . Jointing of pipes by but welded joints (fabrication work)as per IS: 816-1969 (Welding) & IS: 814(part 2)-1974(Electrodes) ,including supply of all electrods and gas for cutting and welding ,hiring ,carting of all etectric generator ,welding and cutting equipements etc complete , laying of pipe line tru to alignment and as per direction of Engineer-in-charge after painting one coat of anti corrosive paint and testing of pipe line after complition of work. (IS:5822-1986)

MSERW pipe ,80 mm dia x4.0mm thick .

MSERW pipe ,80 mm dia x4.8mm thick

MSERW pipe ,80 mm dia x5.5mm thick

Providing of all materials, Carting , laying & jointing fixing and testing of G.I screwed pipe with specials in trenches (including cost of jointing materials like white lead, hemp and oil etc.) testing of pipe (Medium quality) in trenches with cutting, threading etc complete. Confirming ISI 1239(Part-1)

80mm dia

65 mm dia

50 mm dia

40 mm dia

32 mm dia

25 mm dia

20 mm dia

Exacavating trenches for laying MS.ERW/G.I(M) pipeline ramming of bottoms, depth upto 1.5 m including getting out the excavated soil & then refilling the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc and disposal of surplus excavated soil as directed within a lead of 50 m.

All soil mix with shingle boulders

Ordinary Rock

Cartage of following sizes of sluice valves,lowering them into trenches and fixing the same on water supply line including cost of valves, specials lobour T&P complete in all respect but excluding the cost of excavation and chember. Confirming to IS: 14846-2000

80mm dia (P.N 1.60)

80 mm dia (Brass/G.M. Valve)

65 mm dia (Brass/G.M. Valve)

50 mm dia (Brass/G.M. Valve)

40 mm dia (Brass/G.M. Valve)

32 mm dia (Brass/G.M. Valve)

25 mm dia (Brass/G.M. Valve)

20 mm dia (Brass/G.M. Valve)

Providing and fixing gun metal non- return valve of approved quality (screwed end) : mm nominal bore (Vertical)

80 dia (P.N 1.60

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :

80 mm Dia

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. For Approach road along Rising main alignment

Constructing masonry Chamber for sluice valve with a floating coat of neat cement complete as per standard design :With F.P.S. bricks (0.9x0.9x0.90)

Construction of Gate Valve Chamber including supply of materials, labours, T&P etc required for proper completion of work. (0.60x0.60)

Construction of Air Valve Chamber including supply of materials, labours, T&P etc required for proper completion of work. (0.45x0.45)

(a) R.C.C. work with cement, coarse sand and 20mm gauge stone ballast in proportion of 1:1.5:3 excluding rebars.of thrust block at bends in pipeline including supply of all materials, labour, T&P etc complete. 0.60mx0.60mx0.6m (for 22.5° bend), 0.75mx0.75mx0.75m (for 45° bend) 0.90mx0.90mx0.9m (for 90° bend)

(b) Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Reinforcement for R.C.C. Work Using Mild Steel and Medium /Tensile Steel Bars

Centring and shuttering including strutting,ropping etc. and removal of form for Centring and Shuttering for Suspended floors, roofs, landings,balconies and access platform.

Supply of all materials, labours, T&P etc and construct block / brick masonry 1.5m high boundary wall.

Supply of all materials,labours, T&P etc.and construct RCC stand post as per type design complete.

Supply of all labour, materials, and T&P etc and privide 2.0 m wide M.S. gate and 1.8 m height gate with pillars as per departmental type design, at proposed water works site.

Dismantling and reinstatement of following type of road surface for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. Concrete road

PROTECTION WORKS construction of following type of Random Rubble Stone Masonry wall for safety of main structural works like pipeline, reservoir & Intake works including supply of all material, labour, T&P and royaltiies etc complete.(As per PWD Uttarakhand specifications)

Laid in 1:6 (cement: sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8

S.I.T.C. of Submersible Pumping Plant with Accessories for Infiltration well

Supply of Submersible pump and motor set: 370 L.P.M. discharge at 125mts. NEH.

Supply of fully automatic Auto Transformer starter of above pumping plant .

Supply of control panal (one incoming & two outgoing) of above pump.

Supply of Main piping and valves of above pump.

Supply of of 10sq.mm. 3 core Copper conductor P.V.C. insulated submersible cable

Supply of chain pulley 2tonne capacity, 4 Mt. lift, tested on 3.0tonne load.

Supply of Electronic type liquid chlorine dosing system

Supply of Chlorine Testing Kit

Supply of Liquid Chlorine (50Kg Cane)

Supply of Pressure Gauges of above pumping plant.

Earthing of pumping plants and including supply of all materials and labour etc complete in all respects.

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025

Supply of tools

Supply of Chain wrench 80 mm size

Supply of 100Amp. TPN Main Switch

Supply of of 63KVA automatic voltage regulator (compact) servo controlled stablizer with all accessories as per spacification .

Carting of Pumping plant and accessories as described above .

Installation commissioning and testing

Painting

Trial Run & Maintenance for six Months

S.I.T.C. of Centrifugal Pumping Plant with Accessories for Stage-1st

Centrifugal Pump Set

Supply of High head multistage horizontal Centrifugal pumping plant capable to deliver 320LPM at 300Mts. Head. Supply of Induction motor T.E.F.C 2900 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply for above pump. Supply of M.S. fabricated base plate for above pump and motor set, coupling and coupling guard.

Supply of Fully automatic Auto Transformer starter of above pump.

Supply of Control Panel of above pump.

Supply of Power Wiring material.

Supply of Earthing material .

Supply of Main piping and valves.

Supply of pressure Gauges and compound gauge with fittings.

Supply of Tools.

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025

Supply of 160Amp. TPN Main Switch

Supply of of 100KVA automatic voltage regulator (compact) servo controlled stablizer with all accessories as per spacification .

Carting of Pumping plant and accessories as described above .

Installation

Commissioning.

Testing of pumps at manufacture workes and site

Painting

Trial Run & Maintenance for six Months

S.I.T.C. of Centrifugal Pumping Plant with Accessories for Stage-2nd

Centrifugal Pump Set

Supply of High head multistage horizontal Centrifugal pumping plant capable to deliver 320LPM at 215Mts. Head. Supply of Induction motor T.E.F.C 2900 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply for above pump. Supply of M.S. fabricated base plate for above pump and motor set, coupling and coupling guard.

Supply of Fully automatic Auto Transformer starter of above pump.

Supply of Control Panel of above pump.

Supply of Power Wiring material.

Supply of Earthing material .

Supply of Main piping and valves.

Supply of pressure Gauges and compound gauge with fittings

Supply of Tools.

Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025

Supply of 160Amp. TPN Main Switch

Supply of of 63KVA automatic voltage regulator (compact) servo controlled stablizer with all accessories as per spacification .

Carting of Pumping plant and accessories as described above .

Installation

Commissioning.

Testing of pumps at manufacture works and site

Painting

Trial Run & Maintenance for six Months

M/s Trilok Rawat