Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical BAGH I ALI MARDAN KHAN NOWSHERA SRINAGAR J K 190011 | SRINAGAR | JAMMU AND KASHMIR | 190011 | Accepted-Technical All docs appended with the bid |
| 2 | Accepted-Technical BEEHAMA GANDERBAL SHEIKH ENGINEERS AND CO BEEHAMA GANDERBAL GANDERBAL GANDERBAL JAMMU KASHMIR 191201 | GANDERBAL | JAMMU AND KASHMIR | 191201 | Accepted-Technical All docs appended with the bid |
| 3 | Accepted-Technical 15 NEW IDDGAH BUILDINGS NH BARAMULLA BARAMULLA JAMMU KASHMIR 193101 | BARAMULLA | JAMMU AND KASHMIR | 193101 | Accepted-Technical All docs appended with the bid |
| 4 | Rejected-Technical | Rejected-Technical All docs not appended with the bid |
| 5 | Rejected-Technical ALAMDAR COLONY LAL BAZAR SRINAGAR J K | Rejected-Technical All docs Not appended with the bid |
Tender Value
₹19.0 L
EMD Value
₹38,060
Closing Date
31 Jan 2026, 2:30 pmClosed
Executive Engineer Gas Turbine Division Pampore
Pampore Pulwama
Capital Overhauling of Gates at different locations along Canal, Headworks, Forebay and Tail Pool at MHEP Pahalgam
2026_SPDC_300551_1
GTD/PDC/TS/10 of 2025-26
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
30 days
Pahalgam
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,500
Yes
CP and AO Srinagar JKSPDC
₹38,060
Yes
Pampore
19 Feb 2026
13 Jan 2026
2 Feb 2026
14 Jan 2026
31 Jan 2026
19 Jan 2026
17 Jan 2026
Providing, installation and testing of new steel ropes by cutting, splicing/socketing, de-reeving the old rope, re-reeving and tensioning the new rope.
1.1) 18mm, high-strength (1770N/Sqmm), 205 KN, galvanized steel wire rope built with the 6x19 (9-9-1) IWRC construction. Lay: RHOL
1.2) 16mm, high-strength (1770N/Sqmm), 162 KN, galvanized steel wire rope built with the 6x19 (9-9-1) IWRC construction. Lay: RHOL
1.3) 14mm, high-strength (1770N/Sqmm), 124 KN, galvanized steel wire rope built with the 6x19 (9-9-1) IWRC construction. Lay: RHOL
1.4) 12mm, high-strength (1770N/Sqmm), 91 KN, galvanized steel wire rope built with the 6x19 (9-9-1) IWRC construction. Lay: RHOL
Complete overhauling of gear boxes including servicing (replacement of oil seals, greasing, oil change, replacement of all damaged parts), providing & fixing of MS covers including paintings. (Complete Job)
Providing and fitting of shaft couplings as per sample (Complete Job)
Complete overhauling and alignment of gates including replacement/ repair of damaged rollers/bushes/locks/etc, providing and fitting of rubber seals as per sample (sides & bottom), painting of gates and SITC of DOL Starters (Complete Job)
Complete overhauling, repair/alignment including replacement of rollers/ bushes of stop lock gate at power house tail pool (Complete Job)
Complete Overhauling and commissioning of overhead crane at Tail Pool along with SITC of cables, control switches, contactors and relays, wireless radio remote system as per sample (Complete Job)
Providing and applying of Cardium compound for steel wire ropes
SITC of 5HP three phase motor with 940 RPM. (As per Sample)
Repair/Rewinding of 3-phase 1415 rpm, 2 HP motor as per Sample.
Repair/Rewinding of 3-phase, 1400 rpm, 1HP motor as per Sample.
Repair/Rewinding of 3-phase, 935 rpm, 3HP motor as per Sample.
Repair/Rewinding of 3-phase, 925 rpm, 1.5HP motor as per Sample
Providing and fitting of Chain Kit for manual operation
Providing and fitting of Jaw flexi Coupling as per sample
Repair of existing Gangway at Headworks
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.17 MB
BOQ_975004.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .