REPAIR TO WOODEN FURNITURES INCLUDING CHARPOY AND

Amount

SCH PART-I REPAIR TO STEEL AND WOODEN FURNITURE A) Removal of following existing unserviceable following components of various steel and wooden furniture items given below carefully without disturbing the adjoining parts and supply & fixing new components confirming to IS and as approved as mention below. All steel surfaces from inside and outside shall be given spray painting two coat of existing synthetic enemel paint. Apart from BSO furniture yard the repairs will also be carried out in various units as and when required after tightening the joints,placing every part in tact, as per drgs and as directed by GE/Engineer-in-Charge.

Almirah Large Steel Half Hanging Half Shelf /Cadet steel [ FD/E6/MAP/18 ]

a) 3-Way locking system as per drg

b) Handle as per drg

c) MS Lock as per drg

d) Adjustment of loose shelf by screw/clamp/hook as per drg

e) Adjustment of loose door by hinges as per drg

f) Welding the joints where required including painting the welded parts to match with existing

Almirah Large Steel with shelves [ FD-1031 ]

a) 3-Way locking system as per drg

b) Handle as per drg

c) MS Lock as per drg

d) Adjustment of loose shelf by screw/clamp/hook as per drg

e) Adjustment of loose door by hinges as per drg

f) Welding the joints where required including painting the welded parts to match with existing

Almirah Cadet Steel size 1727x749x585mm with looking mirror [WDF-49/07]

a) 3-Way locking system as per drg

b) Handle as per drg

c) MS Lock as per drg

d) Mirror as per drg

e) Adjustment of loose shelf by screw/clamp/hook as per drg

f) Adjustment of loose door by hinges as per drg

g) Welding the joints where required including painting the welded parts to match with existing

Almirah Steel Medium with shelves [ FD-1032 ]

a) 3-Way locking system as per drg

b) Handle as per drg

c) MS Lock as per drg

d) Adjustment of loose shelf by screw/clamp/hook as per drg

e) Adjustment of loose door by hinges as per drg

f) Welding the joints where required including painting the welded parts to match with existing

Almirah glazed large steel [ FD-104 ]

a) 3-Way locking system as per drg

b) Glass Door as per drg

c) Handle as per drg

d) MS Lock as per drg

e) Adjustment of loose shelf by screw/clamp/hook as per drg

f) Adjustment of loose door by hinges as per drg

g) Welding the joints where required including painting the welded parts to match with existing

Bed Hard [ FD/E6/MAP/08®/FD-246 ]

a) 12mm thick ISI Marked plywood as per size and drg

b) Head rest as per drg

c) Foot rest as per drg

d) Shoe as per drg as directed by Eng in Charge.

Book Case steel glazed [ FD-90M]

a) Handle as per drg

b) Glass shutter

c) Sliding roller

d) Lock

Charpoy IP with plywood top [ FD/MAP-II/01 ]

a) 12mm thick BWR grade confirmng to IS shall be used as per drg.

b) Shoe as per drg

Charpoy IP folding with ply wood hard top [ FD-388 (R) ]

a) 12mm thick BWR grade confirmng to IS shall be used as per drg.

Charpoy GI with ply top

a) 12mm thick bwp grade confirmng to IS make: Greenply/Centuryply/Archid ply shall be used as per drg.

b) Legs as per drg

c) Long rail as per drg

d) Short rail as per drg

e) welding of pipe where required as per drg

Chair School with Hand Board [ FD/E6/MAP/05 ]

a) Hand board made of Pre-laminated MDF board 18 mm thick exterior grade confirming to IS with PVC beading all around as per drg

b) PVC Seat in blue colour as per drg

c) Shoe for leg of chair all as per drg

d) Welding the pipe where required as per drg.

Chair CB Steel with Arms[ FD-75(M)]

a) Seat as per drg

b) Back as per drg

c) Arm rest as per drg

d) Shoes as per drg.

d) Welding the pipe where required as per drg.

Chair CB Steel without Arms [ FD-75(M) ]

a) Seat as per drg

b) Back as per drg

c) Shoes as per drg

d) Welding the pipe where required as per drg.

Chair Verandah [FD-256/359 & FD/MAP-II/06]

a) PVC sheet for Seat as per drg

b) PVC sheet for back as per drg

c) Caning of Seat as per drg

d) Caning of back as per drg

e)Shoes as per drg

f) Welding of pipe where required as per drg

g) Painting of chair verandah

Chair Computer revolving with arms [FD/E6/MAP/01]

a) Wheel as per drg

b) Base frame as per drg

c) Hight adjustable locking system as per drg

d) Arm rest as per drg

e) Tapestried cloth of seat and back as per drg

Chair Writing (Offrs) [FD/E6/MAP/12]

a) Arm rest as per drg

b) Bolt for arm rest as per drg

c) Tapestried cloth of seat and back as per drg

d) Painting of steel frame as per drg

Filing Cabinet steel with 4 drawers [FD 94]

a) Sliding rollers as per drg

b) Handle as per drg

c) Lock as per drg

Form with Back [FD 78M]

a) Seat plank as per drg

b) Back plank as per drg

c) welding of pipe where required as per drg

d) painting of frame as per drg

Form without Back [FD 77M]

a) Seat plank as per drg

b) Welding of pipe where required as per drg

c) Painting of frame as per drg

Rack Adjustable steel open type 7 shelves 2175x900x500mm [TP]

a) Shelf as per drg

b) Angle as per drg

c) Nut, bolt and adjustment of shelf as per drg

d) Painting of rack as per drg

Rack steel 3 tier 915x460x900mm [FD- 69M]

a) Shelf as per drg

b) Angle as per drg

c) Nut, bolt and adjustment of shelf as per drg

d) paiting of rack as per drg

Table 900 X 600 X 760mm steel with drawer [FD-1008]

a) Lock of drawer as per drg

b) Welding where required (legs/stiffeners/rail) as per drg

c) Shoes as per drg

d) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

Table Office Clerk Steel [ FD-84M/1004 ]

a) Lock of drawer as per drg

b) Welding where required (legs/stiffeners/rail) as per drg

c) Shoes as per drg

d) Top of table shall be made of pre lamineted particle board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg as directed by Eng in Charge.

Table Office Officer Steel [ FD-1002 ]

a) Lock of drawer as per drg

b) Welding where required (legs/stiffeners/rail) as per drg

c) Shoes all as per drg

d) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

Table bed side steel [ FD E6 MAP 15 (R) ]

a) Top,side, of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg as directed by Eng in Charge.

b) Handle as per drg

c) Drawer as per drg

d) Shoes as per drg

Teapoy Varandah [ FD/E6/MAP/17 (R) ]

a) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

b) Welding where required (legs/stiffeners/rail) as per drg

c) Painting as per drg

d) Shoes as per drg

Table Computer [FD/E6/MAP/03]

a) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg as directed by Eng in Charge.

b) Key board shelf with sliding roller as per drg

c) UPS shelf as per drg

d) Leg shoes as per drg

Chair Easy Steel with Cushion [ FD-121 ]

a) Rear legs as per drg

b) Front legs as per drg

c) Side rails as per drg

d) Armd Rest as per drg

e) Cushion seat & Back including cloth as per drg

f) Welding of pipe where required as per drg

g) Painting of frame as per drg

Board Notice/Display board of various sizes [FD-99]

a) Glass shutter as per drg

b) Cloth green baise as per drg

c) Ply /soft board as per drg

d) Door frame as per drg

Book Case [FD-1047]

a) Top with 18mm thick PLB affixed with wooden beedig all as per drg

b) Back Ply as per drg

c) Legs as per drg

d) Shelfs as per drg

Chair Easy [FD- 220 ]

a) Rear legs as per drg

b) Front legs as per drg

c) Side rails as per drg

d) Armd Rest as per drg

e) Caning seat & Back as per drg

Chair Writing [ FD-280 ]

a) Rear legs as per drg

b) Front legs as per drg

c) Side rails as per drg

d) Bottom Stiffner as per drg

e) Horizental back rest as per drg

f) Armd Rest as per drg

g) Caning as per drg

Chair Dining Caning bottom & PVC sheet [FD-279 & FDMAP-II/05]

a) Rear legs as per drg

b) Front legs as per drg

c) Side rails as per drg

d) Bottom Stiffner as per drg

e) Horizental back rest as per drg

f) Caning as per drg

g) Replacement PVC Seat as per drg

Chair Dining long back with seat cushion [FD-FDMAP-II-04]

a) Rear legs as per drg

b) Front legs as per drg

c) Side rails as per drg

d) Bottom Stiffner as per drg

e) Vertical back rest as per drg

f) Seat cushion as per drg

Hat Stand with mirror [ FD-361 ]

a) Pegs as per drg

b) Front ply as per drg

c) Beading as per drg

d) Mirror as per drg

Side Board [FD-1112/MAP]

a) Top/ sides with 18mm thick PLB affixed with wooden beedig all as per drg

b) Back Ply as per drg

c) Door Shutter as per drg

d) Drawer as per drg

e) Knob / Handle as per drg

f) Shelf as per drg

Table bed side [ FD-276 ]

a) Back Ply 6mm as per drg

b) Shelves with 12mm thick Prelaminated particle board one side laminated other side balancing white as per drg

c) Side plank with 18mm thick Prelaminated particle board one side laminated other side balancing white as per drg

Peg Table [ FD-384 ]

a) Table Top 18mm thick PLB with wooden beeding all as per drg

b) Legs all as per drg

c) Rail long/short all as per drg

d) Stiffner as per drg

e) leg bottom shoes as per drg

Table Centre [ FD-/274/375 ]

a) Table Top 18mm thick PLB with wooden beeding all as per drg

b) Legs all as per drg

c) Long/Short rail all as per drg

d) long/short stiffner as per drg

e) leg bottom shoes as per drg

Teapoy Wooden [ FD-278/382 ]

a) Table Top 18mm thick PLB with wooden beeding all as per drg

b) Legs all as per drg

c) Rail Long /Short all as per drg

d) Stiffner Long/ Short all as per drg

e) Leg bottom shoes as per drg

Table Writing [ FD-275 ]

a) Table Top 18mm thick PLB with wooden beeding all as per drg

b) Legs all as per drg

c) Long rail all as per drg

d) Short rail all as per drg

e) long stiffner all as per drg

f) Short stiffner all as per drg

g) Drawers all as per drg

h) Knob all as per drg

j) Cabinet door as per drg

k) Hinges for cabinet as per drg

l) leg bottom shoes as per drg

Table Dining 4'x3' [ FD-/MAPII/03 ]

a) Table Top 18mm thick PLB with wooden beeding all as per drg

b) Legs all as per drg

c) Long rail all as per drg

d) Short rail all as per drg

e) Leg bottom shoes as per drg

Table 3'x2' with drawer [ FD-283 ]

a) Table Top 18mm thick PLB with wooden beeding all as per drg

b) Legs all as per drg

c) Long rail all as per drg

d) Short rail all as per drg

e) Drawers as per drg

f) Stiffner all as per drg

g) leg bottom shoes as per drg

Table dining for 6 pers [ FD/MAP-II/03 ]

a) Table Top 18mm thick PLB with wooden beeding all as per drg

b) Legs all as per drg

c) Long rail all as per drg

d) Short rail all as per drg

e) Leg bottom shoes as per drg

Table dressing ladies with mirror and stool [ FD/MAP-II/07 ]

a) Back ply for mirror frame as per drg

b) Frame for mirror assembly complete

c) Mirror as per drg

d) Drawers complete as per drg

e) Knob/Handle as per drg

f) Cushior for stool dressing as per drg

g) Wheel for stool dressing as per drg

Dressing Mirror Gents [ FD/E6/MAP/16 ]

a) Back ply for mirror frame as per drg

b) Frame for mirror assembly complete

c) Mirror as per drg

d) Legs as per drg

Sofa Set single chair/03 seater [ FD-281 and FD/MAP-II/02 ]

a) Removing of existing u/s sofa cushion of size 21"x22" and S & F new seat & back cushion made out of 100mm thick 32mm density foam duly stich with inner cloth and superior quality tapesty cover duply zipped. Make: Cool Foam/Sleep well. The tapestry cloth will be approved by GE / Engineer-in-Charge

b) Seat /back ply for 3 seater as per drg

c) Seat/back ply for single seater as per drg

d) Arm rest as per drg

e) Front leg as per drg

f) Rear leg as per drg

Trolly for TV [FD/E6/MAP/04®]

a) Front Glass door

b) Glass Captcha

c) Glass holder with screw

d) Door for Cupboard

e) Cupboard hinges

f) Cupboard Handle

g) Bottom wheel

h) Top/side board

Table Conference [TP]

a) Remove of existing top glass rectangule size 6'(L)x2'(W)x8mm thick and supply and fixing of same at site.

b) Remove of existing top glass half curcle size 9'-6" (outside length) x 3'-2" (inside length) x 8mm thick and supply and fixing of same at site.

c) Remove of existing top glass square size 2'x2'x8mm thick and supply and fixing of same at site.

d) Remove of existing top sunmica rectangule size 6'(L)x2'(W)x4mm thick and supply and fixing of same at site.

e) Remove of existing top sunmica half curcle size 9'-6" (outside length) x 3'-2" (inside length) x2'(W)x 4mm thick and supply and fixing of same at site.

f) Remove of existing top sunmica square size 2'x2'x4mm thick and supply and fixing of same at site.

g) Additional wooden plank for support of size 2'-6"(H)x1-8"(Top width)x1'-2"(Bottom width)x25mm thick

h) Polishing of table confence

Table office officer

a) Replace of top sunmica of size 8'(L)x4'(W)x4mm thick

Sch Part-II- Polishing of wooden furniture (A) M & L for scrapping and filling small holses with putty, preparation of surface and applying french polish of two coat with wood polish to exposed surface of the following wooden furniture complete. (B) Work will be executed where the furniture exist in different user units at OTM/MD Accn under the jurisdiction of GE (I) CG Goa including BSO's Furniture yard and all as directed by GE / Engineer-in-Charge

a) Book Case [FD-1047]

b) Board Notice/Display board of various sizes [FD-99/366]

c) Chair writing [FD-280]

d) Chair Dining [FD-279 and FD/MAP-II/05]

e) Chair Dining long back with cushion - [FD/MAP-II/04]

f) Chair Easy [FD-220]

g) Hat Stand with mirror [FD-361]

h) Peg Table [FD-384]

j) Sofa set 5 Seater [FD-281]

k) Sofa Set 4 Seater [FD-281]

l) Sofa single seat [FD-281]

m) Table Bed Side [FD-276]

n) Table Centre [FD-274/375]

o) Table Dining for 6 pers [FD/MAP-II/03]

p)Table dining for 8 pers [FD-376]

q) Table Dressing Ladies with mirror [FD/MAP-II/07]

r) Dressing Mirror (Table Gents) [FD/E6/MAP-/16]

s) Table Writing [FD-275]

t) Teapoy wooden [FD-382]

u) Table Dining 4'x3' [FD/MAP-II/03]

v) Table 3'x2' drawer [FD-283]

Sch Part-III Painting of steel furniture (A) M & L for preparing all old painted surface and removing dents & bents if required for following steel items and applying two coat of synthetic enamel paint of Grey/OG/Black of Existing color and all external surface complete. (B) Work will be executed where the furniture exist in different user units at OTM/MD Accn under the jurisdiction of GE (I) CG Goa including BSO's Furniture yard and all as directed by GE / Engineer-in-Charge.

(a) Almirah Large Steel Half Hanging Half Shelf [FD/E6/MAP/18]

(b) Almirah Large Steel with shelves [FD-1031]

c) Almirah Cadet steel [WDF-49/07]

d) Almirah Medium steel with shelves [FD-1032]

e) Bench Work Shop/ Work Bench in various sizes [FD-145/TP/WDF-28/87]

f) Book Shelf open large steel [FD-69M]]

g) Book Shelf open small steel [FD-69M]]

h) Book Case steel glazed [FD-90M]

j) Chair CB Steel with Arms [FD-75M]

k) Chair CB steel without Arms [FD-75M]

l) Rack Shoes steel [FD/E6/MAP/02]

m) Rack steel 3 tier 915x460x900mm [FD-69M/1039]

n) Side Rack Steel with 3 tray [FD-1023]

o) Stool steel 305x305x510mm/ 2 feet [FD-81]

p) Table Office Offrs Steel [FD-1002]

q) Table Office Clk Steel [FD-1004]

r) Table 3'x2' steel [FD-1008]

M/s National Traders