Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.1 L
EMD Value
₹7,795
Closing Date
14 Oct 2026, 2:30 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Assistant Executive Engineer
PWD, Special Building Subdivision,Kozhikode
GENERAL-Retrofitting of structural members at Porch of Old Casualty Building-At Govt. medical college Kozhikode-General Civil Work
2026_PWD_877602_1
PWD/BLDG/TR/9814/2026_5_1_1/1
Open Tender
Civil Works - Buildings
Percentage
90 days
Medical college
Please refer tender documents
7 documents required · 7 mandatory
₹690
Yes
₹7,795
Yes
8 Oct 2026
8 Oct 2026
16 Oct 2026
8 Oct 2026
14 Oct 2026
8 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repair work | |||||
| 1.001 | 14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done . | 110 | sqm | 328.26 | ₹36,108.6 |
| 1.002 | 26.28.3:Chipping of unsound/weak concrete material from slabs, beams, columns etc.
with manual Chisel and/ or by standard power driven percussion type or of
approved make including tapering of all edges, making square shoulders of
cavities including cleaning the exposed concrete surface and reinforcement
with wire brushes etc. and disposal of debris for all lead and lifts all complete
as per direction of Engineer-In-Charge25 mm average thickness | 114.11 | sqm | 120.5 | ₹13,749.65 |
| 1.003 | 26.29.1:Cleaning of reinforcement from rust from the reinforcing bars to give it a total
rust free steel surface by using alkaline chemical rust remover of approved
make with paint brush and removing loose particles after 24 hours of its
application with wire brush and thoroughly washing with water and allowing
it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter | 369 | metre | 7.67 | ₹2,830.23 |
| 1.004 | 26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total
rust free steel surface by using alkaline chemical rust remover of approved
make with paint brush and removing loose particles after 24 hours of its
application with wire brush and thoroughly washing with water and allowing
it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter | 82.5 | metre | 15.35 | ₹1,266.38 |
| 1.005 | OD58746/2026-2027:Applying a coat of passivating epoxy zinc rich primer, CERA ZINC ZR, Nitozinc Primer of FOSROC or like approved make with paint brush after removing all loose particles etc. as per direction of Engineer-In-Charge. Bars upto 12 mm diameter | 369 | metre | 13.28 | ₹4,900.32 |
| 1.006 | OD58742/2026-2027:Applying a coat of passivating epoxy zinc rich primer, CERA ZINC ZR, Nitozinc Primer of FOSROC or like approved make with paint brush after removing all loose particles etc. as per direction of Engineer-In-Charge. Bars above 12 mm diameter | 82.5 | metre | 26.59 | ₹2,193.68 |
| 1.007 | 5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | 55.3 | kg | 103.26 | ₹5,710.28 |
| 1.008 | 26.31.2:Providing, mixing and applying bonding coat of approved adhesive on chipped
portion of RCC as per specifications and direction of Engineer-In-charge
complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | 104.48 | sqm | 449.73 | ₹46,987.79 |
| 1.009 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 13.75 | sqm | 700.72 | ₹9,634.9 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
SBD.pdf
Tender Documents • 1.63 MB
BOQ_1491389.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .