Supply and Installation of Children Play Equipment at Peoples Park, C-Block, Defence Colony in Ward No. 145, Central Zone

TODDLER SWING SUPPLY AND FIXING OF TODDLER SWING.THE AREA :- 2.8M X 1.0M . IN THIS TODDLER SWING THE CENTER SUPPORT SHALL BE MADE UP OF 80 MM NB B CLASS G.I. PIPE. THE HORIZONTAL BARS SHALL BE MADE UP OF 50 MM NB B CLASS G.I. PIPE. ALL GI PIPES SHALL BE POWDER COATED. BETWEEN THE TWO HORIZONTAL BARS THERE SHALL BE A HEAVY-DUTY METAL CLAMP ATTACHED TO IT. THE BUCKET SEATS OF THE TODDLER SWING SHALL BE MADE OF RUBBER WITH ANTI SKID. THE BALL BEARINGS SHALL BE MOUNTED INSIDE SPECIALLY DESIGNED NYLON BALLS. THE RUBBER SEAT SHALL BE AFFIXED ON 8 MM THICK GI CHAIN. THE SEATS SHALL BE MADE WITH FULL CARE SO THAT THE CHILD DOES NOT FALL FROM IT WHILE SWINGING. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

ANIMAL MERRY GO ROUND SUPPLY AND FIXING OF ANIMAL MERRY GO ROUND.AREA : Ø 1.5 M. HEIGHT – 0.8 M. SEAT – ROTO MOULDED PVC ANIMAL SHAPE. MAIN FRAME: 40NB G.I.PIPE. BEARING: HEAVI DUTY BEARING. MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. THE MAIN FRAME OF THE ANIMAL MERRY GO ROUND SHALL BE MADE UP OF 25 & 40 NB B CLASS GI PIPES. THE STAND SHALL BE MADE IN 80 NB B CLASS GI PIPE. THE WHOLE STRUCTURE SHALL BE MOUNTED ON HEAVY DUTY BEARING SHAFT PERMANENTLY LUBRICATED WITH WATER SEALANT. THE ANIMAL SHALL BE MADE OUT OF FRP (FIBRE REINFORCED PLASTIC)/LLDPE (LOW LINEAR DENSITY POLY ETHYLENE). IT SHALL ACCOMMODATE 4 CHILDREN AT A TIME. THE PIPES SHALL BE POWDER COATED TO PREVENT RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

STD. SEE SAWSUPPLY AND FIXING OF STD. SEE SAWHANDLE :-20 MM N B PIPE. LEVER-32 MM N B PIPE. COLMUN : 60 MM N B PIPE. BEARING : NYLON BUSH PRESS FITTED. SEATS: FRP SEATS WITH STEEL FRAME. THE TOPCOAT IS DULY POWDER COATED. THE LEVEL OF SEE SAW SHALL BE MADE FROM 15, 20 AND 25MM NB B CLASS GI PIPE. THE SEAT OF SEE SAW SHALL BE MADE FROM FRP/LLDPE. THE STAND AND BUSH BEARING MADE IN 40MM NB B CLASS GI PIPE. SEE SAW LEVER SHALL BE WELDED TO 5MM THICKNESS MS PLATE FOR NUT BOLTING WITH STAND. ALL PIPES FLAT SHALL BE POWDER COATED TO AVOID RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE)C37C40C41C39 (AS PER DIRECTION OF OFFICER IN CHARGE.)

STRAIGHT NET CLIMBER SUPPLY AND FIXING OF STRAIGHT NET CLIMBER. AREA : 0.5 M X 1.7 M. HEIGHT : 2.1 M. THE MAIN FRAME OF STRAIGHT NET CLIMBER SHALL CONSIST OF 40 MM NB B CLASS GI PIPE. -THE JOINT BALLS SHALL BE MADE FROM LLDPE (LOW LINEAR DENSITY POLYETHYLENE) /PP MATERIAL WITH GROUP SCREWS PROVISION FOR ROPE HOLDING. -O HOOKS OF THE FRAME HAVING 50MM BENDING DIA AND ROD DIA 8MM. -THE LOOP SHALL BE GIVEN TO THROUGH O HOOKS  TO GET A GRIP WHILE CLIMBING. -ROPE USED OF PP NYLON MIX TYPE HAVING 22 MM DIAMETER. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)

Manufacturing, supplying and fixing retro reflective sign boards madeup of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee sectionISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats,providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zincchromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge 16.59.1 Mandatory/ Regulatory sign boards of 900 mm diameter with support length of 3750 mm