Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹22.8 L+₹1.5 L (7.04%)Rejected-Finance INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L2 | Rejected-Finance Rejected due to bidder not L1 |
Tender Value
₹20.1 L
EMD Value
₹40,300
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
SPL REPAIRS TO P97 P98 ADDN ALTN TO P51 AND PROVN OF KITCHEN SINK SANTRY POST AT ZONE A AHMEDABAD
2022_MES_546145_1
8280/E8
Open Tender
Civil Works
Works
210 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹40,300
Yes
27 Sept 2022
18 Aug 2022
9 Sept 2022
18 Aug 2022
7 Sept 2022
24 Aug 2022
18 Aug 2022 - 24 Aug 2022
Amount
Dismantling of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.
Dismantling of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete
Dismantling of reinforced cement concrete (reinforcement cut as required to facilitate demolition) columns, beams, staircases, landing, chajjas and similar suspended work complete
Dismantling wrought iron or mild steel work of any description not oth-erwise provided for complete.
Dismantling asbestos cement( corrugated or semi corrugated, etc) sheets in roof covering complete.
M&L for Excavation in trenches n exc 1.50m wide and n exc 1.5 m deep for foundatiuon in soft/loose soil complete
Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.
Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.
Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in hard / dense soil complete.
M&L Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface complete.
M&L for cement concrete 1:4:8 type D2 (using 40mm graded aggregate) in foundation filling & mass concrete complete.
M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in beams complete
M&L for Reinforced cement concrte (1:2:4) type B1 (20mm graded aggregte) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete.
M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 1:2:4 using 12.5mm aggregate set in cement mortar 1:4, including all mouldings and demolition of old louvers and jallies complete.
M&L for PCC Mix 1:3:6 type C-2 (40mm graded stone aggregate) in foundations, filling and mass columns, pillars,boundary pillars and posts (including caps and bases) complete
Supplying & applying Integral waterproofing compound complete.
M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.
M&L for 40 mm thick Damp proof coures in cement concrete (1:2:4) type B0 to horizontal or vertical surfaces including water proofing compound necessary formwork complete.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete
M&L for 20mm Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
M&L for rough finished surfaces of concrete, Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Flat) complete.
M&L for rough finished surfaces of concrete, formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc complete.
S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated complete.
S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete.
S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm Prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete.
Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete.
Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete.
S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete.
S&F Stainless steel butt hinges medium weight 100mm long complete.
S&F butt hinges 100 mm size heavy weight cold rolled mild steel complete
M&L for 150mm long extructed aluminium handle fabricated type complete.
S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete.
S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete.
S&F mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete.
M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L TMT bars 6mm to 8mm Dia cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete
M&L of Rolled sections Fe-410-W(GdeE-250) quality B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails etc, including distances pieces, base plates, nut bolts etc including complete.
S&F framed work as in door or gates of angle or other section with gusset plates, rails, braces,etc complete, drilled for fixing of steel sheeting or other covering for door etc to be prepared for hanging or sliding with and including either hooks and complete.
S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars dove-tailed or welded complete including one coat of shop coat of primer complete.
S&F Steel windows or ventilators, fixed type, with glazing bars complete.
S&F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete.(Note : Corrugation shape and colour of sheet shall be as approved)
S&F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete.(Note : Corrugation shape and colour of sheet shall be as approved)
S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs walls etc fixed with L-type or J-type or cranked hook bolts complete.
Refixing of asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete.
S&F 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts complete.
M&L complete removal of existing joint filling and cleaning out the and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete.
M&L for prepolished machine cut Kota stone slab 18 to 22 mm thick as in floors jointed with grey cement slurry incl. rubbing and polishing complete.
M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete.
M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg.) 75 mm thick as sub base in foundation complete.
M&L PCC type B1 Mix 1:2:4 (20mm graded stone aggregate), 70mm thick in vehicle ramp finishing the surface even and smooth without using extra cement complete
M&L for cement concrete 1:2:4 type B2 (40mm graded aggregate) 100mm thick as in flooring, joint filled with bitumen felt, finished even and smooth with using extra cement complete
M&L machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.
M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete.
Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete.
M&L Rendering on fair faces of brick work of thickness 15 mm thick in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instructions finishing the surface fair and even with out using extra cement complete.(WPC measured and paid separately)
M&L for 10 mm thick rendering on (internal) fair faces of brick work/concrete surfaces in CM (1:6) finished even and smoth without using extra Cement complete.
M&L for 10 mm thick rendering on ceiling of concrete surfaces in CM (1:3) finished even and fair without using extra cement complete.
M&L for screed bed or bedding layer of mortar (1:6) 20mm thick as laying in floor finishes complete.
M&L for preparation of newly plastered surfaces and applying three coat of colour wash on wall surfaces complete.
M&L for preparation of old plastered surfaces of wall and applying one coat of White wash complete
M&L for preparation of new surfaces of ceiling and applying three coat of white wash complete.
M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls complete.
M&L for Preparation of new surfaces of walls of any description and applying two coat of cement base paint over one coat of white wash complete
M&L complete removal and preparation of old decorated surface of walls (plastered/unplastered) and greasy spots and applying two coat of colour on walls complete.
M&L complete removal and preparation of old decorated surface of walls and applying two coats of cement based paint over one coat of primer on walls complete.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m in each pane complete.
M&L Preparation of New surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying Two coat of synthetic enamel paint,incl one coat Primer complete.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete.
M&L Preparation of old or previously treated steel surfaces of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete.
Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete.
S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete.
Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete.
S&F 20mm bore tubes `medium grade', galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete.
S&F in repairs CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete
S&F in repair bib taps 15mm bore of cast copper alloy CP fancy type, screwed for iron pipe or for brass ferrule & fixed complete.
S&F in repair Pillar taps 15mm bore of cast copper alloy CP fancy type, screwed for iron pipe or for brass ferrule & fixed complete.
S&F in repair stop cock 15mm cast copper alloy, screwed down, with CP fancy type high pressure screwed both ends for iron pipe or for union complete.
S&F in repair PVC connection 600mm long of dia 15mm complete complete.
M&L in repairs 100mm dia Cast iron Nahani trap long necked, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete
S&F in repair vitreous china wash basin, white flat back screwed down for iron pipewaste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete.
S&F in replacement 0.63 mm thick stainless steel plate rack of size 24"x36"x10" complete.
S&F in repairs Water Closet ( Squatt pattern) Orissa pattern size 580 mm x 440mm, white, with 'P' or 'S' integral foot rest including provision of PCC bedding, complete.
S&F in repair 10 litre capacity PVC flushing cistern, valve less symphonic type low level or high level with inlet, ball valve float chains pull and brackets complete with flush pipe 32mm dia complete.
Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators for One light / Exhaust fan point controlled by one switch complete
All as per Item No 89 above but for One fan point controlled by one switch.
All as per Item No 89 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 89 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 89 above but for one 16 amp socket outlet modular type for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F switch piano flush button single pole one way 6 amp complete.
S&F switch piano flush button single pole one way 16 amp complete.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete.
S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable & similar to Philips cat ref no. WT202W LED6S CW PSU S1 PC complete.
S&F LED 20W security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections complete
S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete
S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete.
S&F in repairs MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete.
S&F in repairs MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete.
S&F in repairs MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408702 complete.
Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.
M&L in repairs earthing with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate and shown in EP-5 of SSR Part-I complete.
Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and deposit to MES store complete.
M&L of ceiling fan recd from taking down any sweep any make, cleaning throughly, servicing of fan motor & parts fitted there in, oiling, greasing to bush / bearings, replacement of unserviceable parts if required, applying two coat of white synthetic enamel paint over one coat of primer on fan blades and body, re- assembling, testing hanging at site complete.
Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete.
Supply, laying and testing of LT UG cable, XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete.
S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.
M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.
Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.
Horizontal boring holes in soil for road crossing and getting out and disposal of spoil to a distance n exc. 50 m for a pipe of dia 40 mm in size complete.
S&F wall mounted fan with powder coated guards and blades of approved colour, AC single phase, 230 volts, 50Hz, 1440 rpm, 400mm sweep with adjustable verticle angles & three speed controls mounted within reach of hands with necessary connecting cables recommended/ provided by manufacturer complete.
DMA PROJECTS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .