C/O Govt. Sr.Secondary Schook Manglore Tehsil Banjar Distt. Kullu HP

Amount

Earth work in excavation for structure in all heights and depths in all kinds of soil including saturated soil comprising of soil ordinary, & blasting work soft and hard rock with chiseling/wedging out of rock( where blasting is prohibited) and their intermediate classification of soil. If water is met in the spring seepage rain and other causes it shall be removed by suitable diversion, pumping and bailing out and the excavation shall be kept dry wherever so required by the contractor at his own cost , including dressing of slopes and beds setting out confirming to required lines, grades , side slopes as shown in the drawing and direction of Engineer-in-charge and transportation soil to road way and then disposing of surplus excavated earth in required width of road or on approved dumping sites including its stacking leveling and dressing in all leads and lifts through all modes of transportation including head load animal load or mechanical means or other incidentals to complete the work as per technical specifications clause 305.1. All useful materials, such as stone shingles agg. and slates shall be sorted out and stacked along road sides to the maximum possible extent in all leads and lifts. Any loss to the public and private property during the course of execution of disposal of serviceable and un-serviceable materials which shall be absolute responsibility of the contractor shall have to be duly compensated by him in all respect. construction of shoring and barcing removal of slumps and other delterious material and back filling in trenches with executed suitable material.

Excavation in foundations, trenches etc. in earth work in all kinds of soil such as pick jumper work, blasting work and hard blasting work saturated soil including chiselling where blasting is not possible or any other mixed variety of soil dewatering and removal of slush and other incidentials lift upto any height stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) thick layer when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of al surplus excavated earth with in all leads and lift and carriage of materials in all respect and as per direction of Engineer-in-charge.

Drilling of holes in all depth 1.50 (one point five zero) metre centre to centre including hauling/ carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Supplying , fitting and placing HYSD bar reinforcement in foundation complete as per drawing and technical specification clause 1000 and 1202 including hauling/ carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing weep holes in brick masonry /stone masonary/ plain reinforced concrete abutment,wing wall,returen wall with of 100 mm (one hundred milimetre) dia PVC pipe extending through the full width of the structure with slope of1( v):20( H) towards drawing face complete as per drawing and technical specifications clause 614,709,1204.3.7 within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30x30x5mm.(thirty into thirty into five milimetre) so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs.(four metre) and removal of the same for insitu-reinforced concrete & plain concrete work in: (a) Foundation, footings basis of columns etc. and mass concrete.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200 mm (two hundred milimetre) in thickness including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Columns, pillars, posts and struts Square, rectangular or polygonal in plan.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Stair cases with sloping or stepped soffits excluding landing.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers,bressumers and lintels not exceeding 1 Mtr. (one metre) in depth in all heights from floor.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Edges of slabs and breaks in floors and walls: under 20 cm. (twenty centimetre) wide.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Vertical surface such as wall(any thickness) partition and the like including attached pilaster buttresses plinth and string courses and the like.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (one cement:six sand : twelve graded stone aggregate 40 mm (forty milimetre nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth:including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded stone aggregate 40mm (forty milimetre nominal size) and curing complete including cost of form work in: Foundation and plinth including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing concrete for plain reinforced concrete in open foundation complete as per drawing and technical specification clause 802,803,1202 and 1203 PCC. Grade M-10 (M-Ten) 1:3:6 (one cement: three sand: six graded stone aggregate 40mm (forty millimetre nominal size) Including the cost of form work Including all leads and lifts of materials to various location through all mode of transportation and as per direction of Engineer-in-charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 ( one cement: two sand: four graded crushed stone aggregate 20mm ( twenty millimetre) nominal size) and curing complete excluding the cost of centring and shuttering in foundation and plinths including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying mechanically mixed and vibrated reinforced cement concrete 1:2:4 ( one cement: two sand: four graded crushed stone aggregate 20mm ( twenty millimetre) nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in Suspended floor, roofs, landings shelves and their support, balcnies, beams, girders, bressumers and cantilevers upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying mechanically mixed and vibrated reinforced cement concrete 1:2:4 ( one cement: two sand: four graded crushed stone aggregate 20mm ( twenty millimetre) nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in wall any thickness but not less than 0.10 (zero point one zero) centimetre in thickness including attached pilaster plinth and string courses from top of foundation upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying mechanically mixed and vibrated reinorced cement concrete 1:1.5:3 ( one cement :one point five sand : three graded crushed stone aggregate 20mm (twenty milimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in foundations, footings, basis of columns and like mass concrete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying mechanically mixed and vibrated reinorced cement concrete 1:1.5:3 ( one cement :one point five sand : three graded crushed stone aggregate 20mm (twenty milimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in Suspended floor, roofs, landings shelves and their support, balcnies, beams, girders, bressumers and cantilevers upto all floor level including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying mechanically mixed and vibrated reinorced cement concrete 1:1.5:3 ( one cement :one point five sand : three graded crushed stone aggregate 20mm (twenty milimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in Columns, pillars, posts and struts up to any floor level and hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying mechanically mixed and vibrated reinorced cement concrete 1:1.5:3 ( one cement :one point five sand : three graded crushed stone aggregate 20mm (twenty milimetre) nominal size graded/crushed stone aggregate 20mm (twenty milimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in Stair cases (except spiral stair cases) excluding landing but including preparing to the surface and finishing of nosing in all floor levels.up to any floor level and hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying damp proof course 38 mm (thirty eight milimetre) thick with cement concrete 1:2:4 (one cement:two sand:four graded stone aggregate 12.5 mm (twelve point five milimetre) nominal size) and curing complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent ) of approved quality using 1.70 kg (one point seven zero Kilo gramme ) per square meter on damp proof course after cleaning the surface with piece of cloth lightly soaked in kerosene oil.including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing in R.C.C work smooth finishing of the exposed surface with cement mortar 1:3 (one cement : three sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing mild steel/Tor steel reinforcement for R.C.C. (rainforced cement concrete) work including bending, binding and placing in position complete upto floor two level : Tor Steel including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Brick work using Second Class common burnt clay building bricks in Super structure above plinth level upto all levels in cement mortar 1:6 ( 1 Cement: 6 Sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Brick work using Second Class common burnt clay building bricks in foundation and plinth laid dry/ mud mortar including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Half brick work using second class common burnt Clay building bricks in super structure above plinth level up to floor all level in cement mortar 1:4 (1 cement : 4 sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate 20mm (twenty milimetre nominal size) at plinth level in Cement Mortar 1:6 (one cement:six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Stone filling under floor including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Back filling with granular materials behind abutment wing walls and return walls complete as per drawing and technical specification clause 1204.3.8 to various location through all mode of transportation including Carriage of material in all leads and lift of materials and as per direction of Engineer- in- charge.

Sand filling in plinth and under floor including watering, ramming, consolidating and dressing complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Filling with brick aggregate in sockpit complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 12 mm (twelve milimetre) thick prelaminated board both side bwp phenol bonded exterior /interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm (forty milimetre) thick frame including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 12 mm (twelve milimetre) thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters withframe of 1st class deodar wood for cup board including nickel plated bright finished piano hinges -25mm (twenty milimetre) thick frame including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 8mm (eight milimetre) thick Particle board bwp phenol bonded exterior /interior grade in partitions with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing first class deodar wood square edges cover fillets (beading) 50mmx6mm (fifty milimetre into six milimetre) section,including mitring at junctions with wood screws and nails complete in ceiling and lining including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 75 mm x 60mm (seventty five into sixty milimetre) rounded hand rails in straight length complete including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing anodized aluminium door bolts anodized colour and shade with bolt and nuts screw etc. complete (i) 250x16mm (two hundred fifty x sixteen milimetre) including carriage of materils with in all leads lifts and other incidentals and as per direction of Engineer-in-charge.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete (i) 250x10mm (two hundred fifty x ten milimetre) including carriage of materils with in all leads lifts and other incidentals and as per direction of Engineer-in-charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.(i) 100 mm (one hundred milimetre) including carriage of materils with in all leads lifts and other incidentals and as per direction of Engineer-in-charge.

Providing and laying 50 mm (fifty millimeter) thick cement concrete flooring 1:2:4 (one cement:two sand:four graded stone. aggregate 20mm ( twenty milimetre nominal size) laid in one layer finished with a floating coat of neat cement. including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

providing and fixing glass strips in joints of terrazzo floors (i) 40 mm (forty milimetre) wide and 4 mm (four milimetre) thick including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying White glazed tiles 6 mm (six milimetre) thick in flooring, treads of steps and landing laid on a bed of 12 mm (twelve milimetre) thick cement mortar 1:3 (one cement :three sand) finished with flush pointing in white cement including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying White glazed tiles 6 mm (six milimetre) thick in skirting risers of steps and dado 12 mm (twelve milimetre) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 0.60mm (zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per direction of Engineer-in-charge including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six milimetre) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per direction of Engineer-in-charge including hauling/carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 15 cm. (fifteen centimetre) wide 45 cm. (forty five centimetre) over all semicircular 0.63 mm (zero point six three milimetre) thick plain G.I. Sheet gutter with iron brackets 40x3mm (forty into three milimetre) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing on wall face 75mm (seventy five milimetre) dia C.I. bend for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (one cement :two sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing angle iron door,window,clerestory window frame manufactured from M.S.Angle iron section of 50X50X6 mm (fifty into fifty into six milimetre) ,thickness including hinges jamb,lock jamb,beed and if required angle thrash hold ofmild steel angle 50X25 mm (fifty into twenty five milimetre)welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge with in all leads and lifs of materials in all respect.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint (a) Fixed steel windows including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Side hung steel windows including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Top hung steel ventilators including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Steel work welded in built up sections,trusses and framedwork,including cutting,hoisting, fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Steel work in single sections including cutting,hoisting,fixing in position and applying a priming coat of red lead paint In R.S.Joists,channels angles,tees including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point sixty six milimetre to two milimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter :-- With other than white ready mixed paint including carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:6(one cement:six sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

15mm (fifteen milimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:5(one cement: five sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

6mm (six milimetre) Cement plaster to ceiling in Cement mortar 1:4 (one Cement: four Sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm (seventy five milimetre) thick (unconsolidated) bed dry brick/stone aggregated 40 mm (forty milimetre) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. iincluding hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing plinth protection 50 mm (fifty milimetre) thick in cement concrete 1:3:6 (one Cement : three Sand : six Graded stone aggregated 20 mm (twenty milimetre nominal size) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:three Sand) including earth work and laying 10 cm (ten centimetre cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm (forty milimetre nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty milimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing black board of approved quality 6'x4'(six feet into four feet) of approved quality including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous china water closet squatting pan (Indian type W.C pan) 580 mm ( five hundred eighty milimetre) earth work, bed concrete , foot rest and trap to be measured and paid for separately orrisa pattern No 2004(58x44 cm).(twenty eight into forty four centimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providng and fixing 100m size “P” or “S” trap for water closet squatting Pan) including jointing the trap with pan and soil pipe in cement mortar 1:1one cement : one sand) sand cast iron including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing 10/12.50/15 litters vitreous china low level flushing cistern with a pair of CI or mild steel brackets complete with fittings such as lead valve less syphon 15mm(fifteen milimetre nominal size brass ball valve with polythene float CP brass handle union and couplings for connections with inlet outlet and overflow pipes 40mm( forty milimetre) dia CP flush bend including holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing in position brass mosquito proof coupling for over flow pipe of 25mm (twenty five milimetre nominal dia(over flow pipe of 25mm(twenty milimetre) nominal dia(over flow pipe to be measure and paid for separately) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providng and fixing G.I. inlet connection for flush pipe with W.C. pan including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I or M.S brackets painted with white including cutting holes and making good the same but excluding fitting flat back (560x400mm)(five hundred sixty into four hundred milimetre)oval type under counter including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass waste for wash basin or sink 32mm (thirty two milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing M.I. union for wash basin or sink 32mm (thirty two milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing CP brass S trap for wash basin and sink 32mm (thirty two milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing bib tap super or heavy type 15 mm (fifteen milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing 100mm (one hundred milimetre) sand cast iron gratting for gully,floor or nahni trap including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing 600mmx450mm(six hundred into four hundred fifty milimetre) bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing C.P. brass towel rail complete with C.P brass brackets fixed to wooden plugs with C.P. brass 600x20mm( six hundred into twenty milimetre) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing 600mm x120mm (six hundred into one hundred twenty) glass shelf with C.P. brass bracket and guard rail complete fixed to wooden plugs with C.P brass screws including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing soap trays vitreous china recessed sap trap 150mmx150 (one hundred fifty into one hundred fifty milimetre) size including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge

Providing and fixing tooth brush and tumbler holder (vitreous china) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing CP brass pillar tap with capstan head 15mm (fifteen milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providng and fixing brass full way valve with wheel 15mm (fifteen milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providng and fixing brass full way valve with wheel 20mm (twenty milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. (i) 110 mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing PVC plain bend 110mm (one hundred ten milimetre) dia, including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing PVC collar 110mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing PVC door bend 110mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing PVC clamp 110mm (one hundred ten milimetre) dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing PVC floor trap of self cleaning desion ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors, 110x 90mm dia (one hundred milimetre) nominal dia including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing to wall ceiling and floor 20 mm (twenty milimetre) galvanised mild steel tubes (heavy grade) tube fitting and clamps including making good the wall, ceiling and floor including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing to wall ceiling and floor 15mm (fifteen millimetre) dia including making good the wall, ceiling and floor including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Fixing water meter and stop in GMS tube including necessary fitting such asd mild steel galvanized jam nut sockets etc cuttung an making long screws complete 20mm twenty milimetre) nominal size (water meter and stop cock to be measured and paid for separately) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Providing and fixing PVC water storage tank of ISI marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level 2000 (two thousand ) litres net capacity tank including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Supplying cast iron cover without frame for man holes for frames of 500mm (five hundred milimetre) internal dia CI cover medium duty (weight of cover to be not less than 58kg) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Supplying cast iron cover without frame for man holes for frames of 450x610mm (four hundred fifty milimetre into six hundred ten milimetre) internal dia rectangular CI cover (light duty single soat pattern-I) (weight of cover to be not less than 23kg) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Construction of brick masonry chamber for under ground CI inspection chamber and bands with common burnt clay bricks in cement moratr 1:5 (1cement 5sand) CI cover with frames light duty 355mmx610mm internal dimension total weighjt of cover with frame to be not less than 38 kg (weight of cover 123kg and weight of frame 15kg) RCC top slab with 1:23:4(1cement 2sand 4graded stone aggregate 20mm nominal size) in foundation concrete 1:5:10 (1cement 5 sand 10 graded aggregate of 20mm nominal size) finished smooth with floating coat of neat cement on walls and bed concrete etc complete inside dimensions 455x610x450mm deep single pipe lineincluding hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

Constructing man hole with R.C.C. top slab in 1:2:4 mix in (one cement: two sand: four graded stone agg. 20mm(twenty milimetre nominal size) foundation concrete 1:4:8 (one cement: four sand: eight graded stone agg. 40mm(forty milimetre nominal size) in side plastering 15mm(fifteen milimetre thick) with cement mortar 1:3 ( one cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( one cement: two sand: four graded stone agg. 20mm(twenty milimetre nominal size) finished smooth complete including curing and testing. a) Inside size 800mm x800mm(eight hundred x eight hundred) and 500mm deep including CI cover with frame ( light duty single seal pattern) 455mmx610mm(four hundred fifty five x six hundred ten milimetre) internal dimension total weight of cover and frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15kg) with 200mm thick wall of brick masonrty using common burnt clay building bricks in cement mortar 1:3(1cement 3 sand) including hauling/ carriage of all labour equipements and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge .

RANDHIR JAMWAL

Yash Pal