PROVN OF ROAD FROM 311 FD HOSP GROUND TO BLDG NO T-167 OF 18 CAVALRY AT AHMEDABAD CANTT

Amount

Excavation over areas not exe 1.5 m deep and getting out in soft/loose soil.

Rolling & Consolidating of the earth filling surfaces by power Roller incl watering etc complete. (Each layer to be measured).

Removing excavated material to a distance n. exc 200m and depositing where directed. (earth excavated in item no. 01.00 above)

Material & Labour 200mm thick soling spread thickness with broken boulders or quarried stones (90mm to 63mm size of boulders) surface formed and rolled and consolidate to required gradient and camber.

Material & Labour for 150mm thick (compacted thickness) WMM (granite, basalt) in two layers of 75mm each as per Table n400-13 of MoRTH specification for road and bridge works 2013 manufactured in WMM plant,material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified and directed by Engr-in-Charge.

Material & Labour for prepration of unsurfaced WMM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat of bituminous primer VG-10 grade @ 7.50 Kg per 10 Sqm, complete all as specified and directed.

Material & Labour Premix bituminous,macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 4% binder contant using paving bitumen VG-30 grade any penetration, complete all as directed.

Material & Labour for Preparing of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc applying evenly a priming/ tack coat of bituminous primer VG-10 grade @ 2.50 Kg per 10 Sqm, complete all as specified and directed.

Material and labour for bituminous premix semi dense asphaltic concrete, 40 mm consolidated/compacted thickness using Hot Mix plant and machenical paver with 5.5% (paving bitumen grade) binder content by weight of total mix, rolled and compacted using 8 to 10 tone power road roller to require camber and gradient completeall as directed.all as specified and as directed by Engr-in-charge.

Material & Labour for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including required earthworks and making drainage opening wherever required complete all as specified and directed.

Material and labour Preparing concrete /bituminous surfaces and painting lines, dashes (contineous/un interrupted), arrows, letters, etc not exceeding 10 cm width with hot applied thermo plastic road making materials (incl glass bead) all as specified in clause 803.4 of MoRHT Specification, white or golden yellow (IS colour No.356) over a coat of primer complete all using road painting machine all as specified and directed by Engr-in-Charge.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions

DMA PROJECTS (BID ID -3102418)