Providing CC Road and CC Culvert to Indhiranagar from Electric pole No.28/271 to Matta Yesu babu house D.No.19/503-2 and Rajulapati Babuji House No.19/503-4 to Jannu Anjamma House D.No.19/19/503-2A in ward no.28 in Gudivada Municipality

Earth work excavation for road way in soil using manual means for carrying of cut earth to embankment site with initial lift of 3M and lead upto 50M as per technical specification of MORTH&M

Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH. Grading-III

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture including cost and conveyance of all materials, labour charges, machine mixing charges, curing charges etc., complete as per S.S.

Supply and placing Poly Sheet (separation membrane of impermeable sheeting) 125 Micron thick under CC Pavement slab including cost of conveyance etc. complete, including over head and contractors profit etc complete

Vibrated cement concrete M 30 grade design mix using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, ting, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification and as directed by the Engineer-in-Charge for C.C Pavement.

Supply of 25 mm thick high performance, expansion joint filler board ( SILFLEXCAPELL HD-100 or equivalent make), placing the same 25 mm below top of pavement slab, sealing with bituminous hot sealing compound (Grade 'A' ISI)/ polysulphide at 50 m interval in CC pavement including cost and conveyance of all materials and labour charges for placing in position for expansion joints conforming to MORTH specification. -1 Rmt of joint length I) 150 mm thick slab

Supply of Polysulphide sealant for joints including cost and conveyance of all material etc., including labour charges for placing in position for contraction joints at -4.50 M interval / for expansion joints/ for longitudinal joints Os per MORTH specification No. 602

Culvert Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of cc drains and culverts upto 3.00m depth

Dust Filling of foundation trenches as per drawing and 11 technical specification Clause 305.3.9 MORD & 304 MORTH

Plain cement concrete (1:4:8) using 40mm graded m/c SS5 12 HBG metal including machine mixing, centering, laying, vibrating, finishing curing etc for CC pavements unit 1.00 cm

Providing concrete for plain/reinforced concrete (M15) in open foundations using 20 mm nominal size Graded hard 13 stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH (for Bed)

Providing concrete for plain/reinforced concrete (M15) in open foundations using 20 mm nominal size Graded hard 14 stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and MORTH specifications Clause for drains side walls above 0.60M height(for Walls)

VRCC M-30 Nominal mix (Cement:fineaggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) 15 coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for culvert slabs

Supplying, Fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded.

Carting away the surplus excavated earth from the work site with a lead of 1.00 Km beyond initial lead including loading, unloading and conveyance but exclding stacking charges etc., complete.