Development of Green Building property (3 Star Griha Rating system or Gem Assocham or Silver rating of IGBC or Approved Equivalent rating system) on Banks vacant plot located at S.No. 68-2B Part, Paradesipalem, Gambhiram, Visakhapatnam, Andhra Pradesh

Name of Work:-Development of Green Building property (3 Star Griha Rating system/ Gem Assocham / Silver rating of IGBC OR Approved Equivalent rating

system) on Bank’s vacant plot located at S.No. 68/2B Part, Paradesipalem, Gambhiram, Visakhapatnam, Andhra Pradesh

Amount as per DSR-

Amount as per DSR-2023 2022 (E&M) (incl.

S.No Description of Item (CIVIL) (incl. Correction Correction factor 1.0633, NS AMOUNT Total Cost

A Cost of Building Works

13 New Technology and material 1,05,63,186.40 - - 1,05,63,186.40

15 Internal firefighting work - 30,19,981.96 10,33,917.73 40,53,899.69

20 Kitchen Equipments - - 92,04,758.31 92,04,758.31

Signature of Contractor NBCC

Digitally signed by VARUN

Name of Work:-Development of Green Building property (3 Star Griha Rating system/ Gem Assocham / Silver rating of IGBC OR Approved Equivalent rating

system) on Bank’s vacant plot located at S.No. 68/2B Part, Paradesipalem, Gambhiram, Visakhapatnam, Andhra Pradesh

Amount as per DSR-

Amount as per DSR-2023 2022 (E&M) (incl.

S.No Description of Item (CIVIL) (incl. Correction Correction factor 1.0633, NS AMOUNT Total Cost

B Cost of Development Works -

35 External Electrification+Street light - 18,76,434.51 2,05,92,923.66 2,24,69,358.17

40 Landscaping & Horticulture 1,37,524.58 - 2,46,346.02 3,83,870.60

Signature of Contractor NBCC

Digitally signed by VARUN

Bill Of Quantities (BOQ)

Name of Work:-Development of Green Building property (3 Star Griha Rating system/ Gem Assocham / Silver rating of IGBC OR Approved Equivalent rating system) on Bank’s vacant plot located at S.No. 68/2B Part, Paradesipalem,

Gambhiram, Visakhapatnam, Andhra Pradesh

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

A Cost of Building Works

1 EARTH EXCAVATION WORK

Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means over areas (exceeding 30cm in depth. 1.5 m in width as well

1 2.6 as 10 sqm on plan) including disposal of excavated earth, lead upto 50m for - - - -

all lift, disposed earth to be levelled and neatly dressed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5

Supplying chemical emulsion in sealed containers including delivery as

2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 1,229.99 255.82 - 3,14,656.04 - -

Diluting and injecting chemical emulsion for PRE - CONSTRUCTIONAL anti-

4 termite treatment under floor using chemical emulsion (excluding the cost of - - - - - -

chemical emulsion)

Along external wall where the apron is not provided using chemical

emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a

4.1 2.35.1 depth of 300mm including excavation channel along the wall & rodding etc. - - - - - -

4.2 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 778.68 42.39 - 33,008.25 - -

Treatment of soil under existing floors using chemical emulsion @ one litre

per hole, 300 mm apart including drilling 12 mm dia holes and plugging with

cement mortar 1:2 (1 cement :2 coarse sand ) to match the existing floor.

5.1 2.35.3.1 With Chlorpyriphos /Lindane E C. 20% with 1% concentration. Sqm 2,214.00 337.88 - 7,48,066.32 - -

2 CONCRETE WORK - - - - - -

Providing and laying in position cement concrete of specified grade excluding

6 4.1 the cost of cantering and shuttering - All work up to plinth level - - - - - -

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal

Centering and shuttering including strutting, propping etc. and removal of

form work for :

7.1 4.3.1 Foundations, footings, bases for columns Sqm - 427.35 - - - -

Providing and fixing up to floor five level precast cement concrete solid

block, including hoisting and setting in position with cement mortar 1:3 (1

8 4.7.1 cement : 3 coarse sand), cost of required centering, shuttering complete : cum 267.09 19,494.99 - 52,06,916.88 - -

1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20

mm nominal size).

Providing and laying damp-proof course 40 mm thick with cement concrete

1:2:4 (1 cement : 2 coarse sand(zone -III) derived from natural soueces : 4

graded stone aggregate 12.5 mm nominal size derived from natural sources.

Centring and shuttering including strutting, propping etc. and removal of

10.1 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 1,220.33 427.35 - 5,21,508.03 - -

Walls(any thickness) including attached pilasters, butteresses, plinth and

string courses etc.

10.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 13,276.75 1,010.48 - 1,34,15,890.34 - -

10.4 5.9.5 Lintels, beams, plinth beams, girders, bressummers and cantilevers. Sqm 7,261.23 802.50 - 58,27,137.08 - -

10.5 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 4,304.31 1,047.58 - 45,09,109.07 - -

10.6 5.9.7 Stairs, (Excluding landings) except spiral -staircases. sqm - 833.62 - - - -

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete below plinth level.

11.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe- 550D or more. kg 2,06,861.75 117.53 - 2,43,12,461.48 - -

Steel reinforcement for R.C.C. work including straightening, cutting,

12 5.22 A bending, placing in position and binding all complete above plinth level. - - - - - -

12.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 5,86,010.35 117.53 - 6,88,73,796.44 - -

Signature of Contractor Page 1 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Add for plaster drip course/ groove in plastered surface or moulding to

Providing and laying in position ready mixed or site beached design mix

cement concrete for reinforced cement concrete work. using coarse

aggregate and fine aggregate derived from natural sources Portland

pozzolana /ordinary Portland /Portland slag cement add mixer in

recommended proportions as per IS : 9103 to accelerate /retard setting of

concrete to improve durability and workability without impairing strength :

including pumping of concrete to site of laying,curing,carrage for all leads,

14 5.33 but excluding the cost of centring ,shuttering ,finishing and reinforcement as - - - -

per direction of the engineer -in-charge for the following grades of concrete :

Note- Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately . in case the cement content in

design mix is more then 110% of the specified mi mum cement content the

contractor shall have discretion to either re /design the mix or bear the cost

of extra cement.

All works up to plinth level - - - - - -

14.1 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 710.45 10,357.89 - 73,58,762.95 - -

14.2 5.33.1.4 Concrete of M40 grade with minimum cement content of 390 kg /cum cum 789.85 10,851.44 - 85,71,009.88 - -

14.3 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 2,159.66 10,745.47 - 2,32,06,561.74 - -

14.4 5.33.2.4 Concrete of M40 grade with minimum cement content of 390 kg /cum cum 2,105.21 11,239.02 - 2,36,60,497.29 - -

Add for using extra cement in the items of design mix over and above the

specified cement content therein.

Providing and fixing of expansion joint system related with floor location as

per drawings and direction of Engineer-In-Charge. The joints system will be

of extruded aluminum base members, self aligning / self centering

arrangement and support plates etc. as per ASTM B221-02. The system shall

be such that it provides floor to floor /floor to wall expansion control system

for various vertical localtion in load application areas that accommodates

multi directional seismic movement without stress to it's components.

System shall consist of metal profiles with a universal aluminum base

member designed to accommodate various project conditions and finish floor

treatments. The cover plate shall be designed of width and thickness

16 5.44 required to satisfy projects movement and loading requirements and secured - - - -

to base members by utilizing manufacturer’s pre-engineered self- centering

arrangement that freely rotates / moves in all directions. The Self -

centering arrangement shall exhibit circular sphere ends that lock and slide

inside the corresponding aluminum extrusion cavity to allow freedom of

movement and flexure in all directions including vertical displacement.

Provision of Moisture Barrier Membrane in the Joint System to have

watertight joint is mandatory requirement all as per the manufactures

design and as approved by Engineer -in-Charge. (Material shall confirm to

ASTM 6063). : Floor Joint of 100 mm gap

Providing and fixing of expansion joint system related with wall joint

(internal/external) location as per drawings and direction of Engineer-In-

Charge. The joints shall be of extruded aluminum base members, self

aligning / centering arrangement and support plates as per ASTM B221- 02.

The material shall be such that it provides an Expansion Joints System

17 5.45 suitable for vertical wall to wall/ wall to corner application, both new and - - - -

existing construction in office Buildings & complexes with no slipping down

tendency amongst the components of the Joint System. The Joint System

shall utilize light weight aluminum profiles exhibiting minimal exposed

aluminum surfaces mechanically snap locking the multicellular to facilitate

movement. (Material shall confirm to ASTM 6063) : Wall Joint of 100 mm gap

Signature of Contractor Page 2 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing and fixing of expansion joint system of approved make and

manufactures for various roof locations as per approved drawings and

direction of Engineer-In-Charge. The joints shall be of extruded aluminum

base members with, self aligning and self centering arragement support

plates asper ASTM B221-02. The system shall be such that it provides

watertight roof to roof/roof to corner joint cover expansion control system

that is capable of accommodating multidirectional seismic movement without

stress to its components. System shall consist of metal profile that

incorporates a universal aluminum base member designed to accommodate

various project conditions and roof treatments. The cover plate shall be

designed of width and thickness required to satisfy movement and loading

requirements and secured to base members by utilizing manufacturer’s

preengineered self-centering arrangement that freely rotates / moves in all

directions. The Self centering arrangement shall exhibit circular sphere ends

that lock and slide inside the corresponding aluminum extrusion cavity to

allow freedom of movement and flexure in all directions including vertical

displacement. The Joint System shall resists damage or deterioration from

the impact of falling ice, exposure to UV, airborne contaminants and

occasional foot traffic from maintenance personnel. Provision of Moisture

Barrier Membrane in the Joint System to have water tight joint is mandatory

requirement. (Material shall confirm to ASTM 6063). : Roof Joint of 100 mm

4 MASONRY WORK - - - - - -

Extra of Brick work/AAC Block masonry/Tile brick masonry in superstructure

19 6.5 above floor V level , for each four floors or part thereof by mechanical cum 40.12 184.65 - 7,408.16

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100

mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum

conforming to IS:2185 (Part 3) in super structure above plinth level up to

floor V level in cement mortar 1 :4 (1 cement: 4 coarse sand ). The rate

includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every

third course of masonry work.

Providing and laying autoclaved aerated cement blocks masonry with 150m

to 300 mm thickwith Grade-1 AAC blocks of density 551 to 650 kg/cum

conforming to is 2185 (part 3) in super structure above plinth level up to

21 6.47 floor V level with RCC band at sill level and lintel level with approved block cum 781.61 9,081.68 - 70,98,331.90 - -

laying polymer modified adhesive mortar all complete as per direction of

Engineer-in-Charge. (The payment of RCC band and reinforcement shall be

made for seperately).

5 CLADDING WORK - - - - - -

Providing and fixing 18mm thick gang saw cut mirror polished remoulded

and repolished) machine cut for kitchen platforms, vanity counters, window

sills , facias and similar locations of required size of approved shade, colour

and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4

coarse sand) with joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing, moulding and polishing

to edges to give high gloss finish etc. complete at all levels.

22.1 8.2.2 Granite stone slab of colour black,Cherry/ Ruby Red - - - - - -

Providing and fixing stone slab with table rubbed, edges rounded and

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions

by cutting a chase of appropriate width with chase cutter and embedding the

23 8.10.2 stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 Sqm 2.34 4,415.54 - 10,332.36 - -

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as

per direction of Engineer-incharge

and finished smooth. :Granite Stone of approved shade

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone

work for wall lining (veneer work) including dado, skirting, risers of steps

etc., in required design and pattern wherever required, stones of different

finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1

24 8.11 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 - - - - - -

kg/sqm including pointing with white cement slurry admixed with pigment of

matching shade, including rubbing, curing, polishing etc. all complete as per

Architectural drawings, and as directed by the Engineer-in-Charge.:

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or

Dark Emperadore etc.

Signature of Contractor Page 3 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

6 WOOD AND P.V.C WORK - - - - - -

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Clerestory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension

Grade), calcium carbonate and natural fibers (wood powder/ rice husk/

wheat husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) fabricated with miter joints after applying PVC solvent cement and

screwed with full body threaded star headed SS screws having minimum

frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) &

1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of

elasticity 900 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof and fire

retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of

required dia and length complete as per direction of Engineer-In- Charge.

(M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5 mm tolerance in profile

dimensions on plus side shall be acceptable but no extra payment on this - - - - -

account shall be made

Providing and fixing Pre-laminated flat pressed 3 layer (medium density)

particle board or graded wood particle board IS : 3087 marked, with one

side decorative and other side balancing lamination Grade I, Type II exterior

26 9.18 grade IS : 12823 marked, in shelves with screws and fittings wherever - - - - -

required, edges to be painted with polyurethane primer (fittings to be paid

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) decorative type, core of block board construction with frame of

1st class hard wood and well matched teak 3 ply veneering with vertical

grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary

Extra for providing lipping with 2nd class teak wood battens 25 mm

28 9.23 minimum depth on all edges of flush door shutters (over all area of door sqm 710.96 503.74 - 3,58,138.99 - -

shutter to be measured).

Providing & fixing bright finished brass 100mm mortice latch and lock with 6

29 9.76 levers and a pair of lever handles with necessary screws etc. complete (Best Each 247.00 931.36 - 2,30,045.92 - -

make of approved quality).

Providing & fixing bright finished brass night latch of approved quality

including necessary screws etc. complete

Providing & fixing IS:3564 marked aluminium Die cast body tubular type

31 9.83 universal hydraulic door closer with necessary accessories and screws etc. Each 308.00 1,225.82 - 3,77,552.56 - -

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe

knobs with nuts complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised

33 9.96 (anodic coating not less than grade AC 10 as per IS: 1868) transparent or - - - - - -

dyed to required colour or shade with nuts and screws etc. complete:

Providing and fixing aluminium tower bolts ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed

toreqired colour or shade with necessary screws etc.

Providing and fixing aluminium handles ISI marked anodised (anodic coating

35 9.100 not less than grade AC 10 as per IS : 1868) transparent or dyed to required - - - - - -

colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper ISI marked

anodised (anodic coating not less than grade AC 10 as per IS :1868)

transparent or dyed to required colour or shade with necessary screws etc.

Providing and fixing magnetic catcher of approved quality in cupboard / ward

37 9.114 robe shutters, including fixing with necessary screws etc. complete. - - - - - -

Signature of Contractor Page 4 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

37.1 9.114.2 Double strip (horizontal type) Each 36.20 43.27 - 1,566.37 - -

Providing and fixing factory made P.V.C. door frame of size 50x47 mm

with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam

sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of

15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced

38 9.119 with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather Metre 536.05 536.93 - 2,87,821.33 - -

seal to be provided through out the frame. The door frame to be fixed to the

wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s

specification and direction of Engineer-in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of

frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19

mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a

coat of steel primers of approved make and manufacture. M.S. frame

covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm

39 9.120 thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall - - - - - -

be tapered in 45 degree angle on both side forming styles and 5 mm thick,

95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be

tapered in 45 degree on the inner side to form top and bottom rail and 115

mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be

tapered on both sides to form lock rail.

39.1 9.120.2 30 mm thick pre laminated PVC door shutters Sqm 250.43 3,992.67 - 9,99,884.35 - -

Providing and fixing steel roller for upvc/Aluminium sliding window with

necessary screws etc complete.

Providing and fixing steel (white power coated ) crescent lock for

upvc/Aluminium sliding window with necessary screws etc complete.

Steel work in built up tubular (round, square or rectangular hollow tubes

etc.) trusses etc., including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer, including welding and

42 10.16.1 bolted with special shaped washers etc. complete. KG 26,993.80 211.85 - 57,18,636.53

Hot finished welded type tubes

Designing, Providing, installing and fixing factory finished customed

design pregalvanized high tensile steel joists manufactured from G350 Z275

confirming to IS:277-1992, minimum coating of galvanizing 275 gm/sqm,

minimum yield stress 35 MPa & minimum tensile strength of 380 MPa placed

1.23 metre apart to support the load of slab etc as per the design &

directions of Engineer-in-Charge.

Steel work welded in built up sections/ framed work including cutting,

44 10.25 hoisting, fixing in position and applying a priming coat of approved steel - - - - - -

primer using structural steel etc. as required.

Structural steel work in single section, fixed with or without connecting

44.1 10.25.2 plate, including cutting, hoisting, fixing in position and applying a priming kg 13,406.75 188.09 - 25,21,675.61 - -

coat of approved steel primer all complete

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel bolts

45 10.28 etc., of required size, on the top of the floor or the side of waist slab with Kg 1,920.00 841.74 - 16,16,140.80 - -

suitable arrangement as per approval of Engineer-in-charge, (for payment

purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners

8 FLOORING WORK - - - - - -

Kota stone slab flooring over 20 mm (average) thick base laid over and

jointed with grey cement slurry mixed with pigment to match the shade of

the slab, including rubbing and polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting,dado and pillars laid

on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand)

47 11.27 and jointed with grey cement slurry mixed with pigment to match the shade sqm 279.80 2,566.05 - 7,17,980.79 - -

of the slabs, including rubbing and polishing complete.

Signature of Contractor Page 5 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone

Extra for Kota stone/ sand stone in treads of steps and risers using single

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS

: 15622 (thickness to be specified by the manufacturer ) of approved make

in all colours, shades except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps and dados over

12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm including pointing in white

cement mixed with pigment of matching shade complete

Providing and laying Vitrified tiles in floor in different sizes (thickness to

be specified by the manufacturer) with water absorption less than 0.08%

and conforming to IS: 15622, of approved brand & manufacturer, in all

colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4

coarse sand) jointing with grey cement slurry @3.3 kg/sqm including

grouting thejoints with white cement and matching pigments etc. The tiles

must be cut with the zero chipping diamond cutter only . Laying of tiles will

be done with the notch trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles gently and easily.

51.1 11.41A.1 Double charge vitrified tile polished finish of size - - - - - -

Providing and laying Vitrified tiles in different sizes {thickness to be specified

by manufacturer), with water absorption less than 0.08 % and conforming to

I.S. 15622, of approved make, in all colours & shade, in skirting, riser of

52 11.46 steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse - - - - - -

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the

joint with white cement & matching pigments etc.

Providing and laying machine cut, mirror polished, Italian Marble stone

flooring laid in required pattern in linear portion of the building all complete

as per architectural drawings, with 18 mm thick stone slab laid over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid

and jointed with white cement slurry @ 4.4 kg/sqm including pointing with

white cement slurry admixed with pigment to match the marble shade

including rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge. : 18 mm thick Italian Marble stone slab,

Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete

as per the architectural drawings with 18 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid

and jointed with cement slurry and pointing with white cement slurry

admixed with pigment of matching shade including rubbing , curing and

polishing etc. all complete as specified and as directed by the Engineer-in-

Polished Granite stone slab of all colour and texture except Black,

9 ROOFING WORK - - - - - -

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20

mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial

emittance> 0.75 on waterproof and sloped surface of terrace, laid on 20 mm

thick cement sand mortar in the ratio of 1 :4 (1 cement : 4 coarse sand) and

55 12.55 grouting the joints with mix of white cement & marble powder in ratio of 1 sqm 2,572.51 1,856.89 - 47,76,868.09 - -

:1, including rubbing and polishing of the surface upto 3 cuts complete,

including providing skirting upto 150 mm height along the parapet walls in

the same manner

Signature of Contractor Page 6 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing and Fixing High Quality Proflex Roof system with 1.3 mm thick

Colour coated galvalume Sheet, including vertical/ curved surface fixed with

polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen

and G.I. limpet washers or with G.I. limpet washers filled

56 NS-1 with white lead, including a coat of approved steel primer and two coats of sqm 1,227.00 - - 3,837.60 - 47,08,730.29

approved paint on overlapping of sheets complete (up to any pitch in

horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters

and trusses and including cutting to size and shape wherever

10 FINISHING WORK - - - - - -

57 13.4 12 mm cement plaster of mix : - - - - - -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster

58 13.11 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement Sqm 12,244.43 565.10 - 69,19,327.39 - -

plaster 1:6 (1 cement : 6 fine sand).

59 13.16 6 mm cement plaster to ceiling of mix : - - - - - -

Providing and applying plaster of paris putty of 2mm thickness over

plastered surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less

than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal

61 13.48A resistance, dirt resistance exterior paint of required shade (Company - - - - - -

Depot Tinted) with silicon additives

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and

including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with

62.1 13.62.1 ordinary paint of approved brand and manufacture sqm 900.00 246.56 - 2,21,904.00 - -

63 13.68 French spirit polishing : - - - - - -

63.1 13.68.1 Two or more coats on new works including a coat of wood filler sqm 10.00 486.30 - 4,863.00 - -

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50 grams/ litre

of approved brand and manufacture, including applying additional coats

wherever required to achieve even shade and colour.

11 ALUMINIUM WORK - - - - - -

Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS:

1285, fixing with dash fasteners of required dia and size, including necessary

filling up the gaps at junctions, i.e. at top, bottom and sides with required

65 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, - - - - - -

rust free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling, C.P.

brass / stainless steel screws, all complete as per architectural drawings and

the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners

to be paid for separately) :

65.1 21.1.1 For fixed portion - - - - - -

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing

hinges/ pivots and making provision for fixing of fittings wherever required

66 21.1.2 including the cost of EPDM rubber / neoprene gasket required (Fittings shall - - - - - -

be paid for separately)

66.1 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 3,898.08 691.40 - 26,95,132.51 - -

Providing and fixing glazing in aluminium door, window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per

67 21.3 the architectural drawings and the directions of engineer-in-charge. (Cost of - - - - - -

aluminium snap beading shall be paid in basic item):

67.1 21.3.2 With float glass panes of 5.0 mm thickness(wt not less then 12.5 kg/sqm) sqm 1,217.06 1,640.36 - 19,96,416.54 - -

Signature of Contractor Page 7 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing and fixing double action hydraulic floor spring of approved

Providing and fixing double action hydraulic floor spring of approved brand

and manufacture conforming to IS : 6315, having brand logo embossed on

the body / plate with double spring mechanism and door weight upto 125

68 21.4 kg, for doors, including cost of cutting floors, embedding in floors as required - - - - - -

and making good the same matching to the existing floor finishing and cover

plates with brass pivot and single piece M.S. sheet outer box with slide plate

etc. complete as per the direction of Engineer-in-charge

68.1 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness Each 24.00 3,077.32 - 73,855.68 - -

Providing and fixing machine moulded aluminium covering of approved

pattern & design, made out of machine cut aluminium sheet and machine

holed for receiving dash fastener, over expansion joints on vertical

surfaces/ceiling floors, the fixing on plate in one row on one side of joint only

69 21.7 shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm - - - - -

long bolt including providing aluminium washers 2 mm thick & 15 mm dia ,

at a staggered pitch of 200mm

centre to centre including drilling holes in the receiving surface and

providing expandable plastic sleeves in holes etc. complete as per direction

of Engineerin-charge :

Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to

69.1 21.7.1 required shade according to IS: 1868, Minimum anodic coating of grade AC Kg 363.00 741.64 - 2,69,215.32 -

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone

work by providing weather silicon sealant over backer rod of approved

70 21.8 quality as per architectural drawings and direction of Engineer-in-charge - - - - - -

12 WATER PROOFING - - - - - -

Providing and laying water proofing treatment in sunken portion of WCs,

bathrooms etc. by applying cement slurry mixed with water proofing cement

comopund consisting of applying: a) First layer of slurry of cement @ 0.488

kg./Sqm mixed with water proofing cement comound @ 0.253 kg./Sqm. This

layer will be allowed to air cure for 4 hours. b) Second layer of slurry of

cement @ 0.242 kg./Sqm mixed with water proofing cement comopund @

0.126 kg./Sqm. This layer will be allowed to air cure for 4 hours followed

with water curing for 48 hours. The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes and masonary

with polymer mixed slurry.

Providing and laying in situ five course water proofing treatment with APP

(Atactic Polypropylene) modified Polymeric memberane over roof consisting

of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of

bonding material @ 1.20 kg/sqm, which shall onsist of blown type bitumen

of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP

modified Polymeric membrane .0 mm thick of 3.00 Kg/ sqm weight

consisting of five layers prefabricated with centre core as 100 micron

72 14.87 HMHDPE film sandwiched on both sides with polymeric mix and the Sqm 2,572.51 579.80 - 14,91,541.30 - -

polymeric mix is protected on both side with 20 micron HMHDPE film. 5th,

the top most layer shall be finished with brick tiles of class designation 10

grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2%

integral water proofing compound by weight of cement over a 12 mm layer

of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of

laying brick tiles shall be paid for separately).

Providing and fixing 50 mm thick extruded polystyrene rigid insulation board

of required size underdeck on ceiling surface, complying with ISO 4898:2008

& ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K

as per ASTM C 578 (measured as per IS 3346), compressive strength of >

350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D

73 26.8 1622, water absorptions < 1% by volume as per ASTM D 2842, oxygen Sqm 2,572.51 1,189.64 - 30,60,360.80

index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia

(max) as per ASTM D 3576. Fire retardent property as per DIN 4102, Part 1

of class B2 and as per ASTM E84 class A, fixed with suitable water based

adhesive and fastener, complete in all respect as per the direction of

Engineer-in-Charge.

Signature of Contractor Page 8 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

TERRACE WATERPROOFING-

Surface Preparation:

The cleaning and preparation of the substrate to which the waterproofing

barrier applied must be carried out thoroughly to leave a sound base for the

74 NS-127 application. Any laitance present on the surface must be removed Sqm 2,572.51 - - 1,176.63 - - 30,26,903.62

mechanically. Release oil and other contaminants which may impair

adhesion must be removed prior to the application. Surface shall be

maintained in dry condition before applying waterproof coating.

Coving at Right Angle Junctions:

All the right angle junctions between floor and wall shall be provided with

coving of size 75mm x 75mm (or as per site conditions) in cement mortar

1:4 admixed with Nitobond SBR Latex @ 2 litres per 50 kg bag of cement

after saturating the surface with water and applying a slurry primer coat

with Nitobond SBR Latex.

Providing and applying single component pitch free polyurethane based

coating of fosroc make Nitoproof 600 PF or equivalent that cures by reaction

with atmospheric moisture to form a tough but flexible waterproofing

membrane. The waterproof coating shall be elastomeric, seamless

waterproof membrane applied in 2 [email protected] Kg/Sqm to form DFT of 1.2

mm thick applied over the prepared surface that is coated with Nitoproof

WB primer. Construction joint treatment and floor wall junctions with

polymer modified mortar, cementitious pressure grouting at leaking points

and over a epoxy primer coat. Termination to be done on grade slab and

sealed inside the groove of 20mm wide x 10mm thick flushed with polymer

74.2 modified mortar of fosroc make. - - -

The Polyurethane waterproof coating shall have the following properties:

1) Elongation (ASTM D412) > 500 to 700%

2) Tensile Strength - (ASTM D412)- 2 N/mm²

3) Tear resistance (kN/m) (ASTM D624-00)-15 kN/m

4) Crack bridging as per (ASTM C836/ ASTM C1305)- 2mm

5) Water permeability@ 5 bar, (BSEN 12390) - Nil

6) Root Resistant

7) Solids content - 85%

On completion of waterproofing application, providing and fix 120gsm non

woven Polypropylene geo textile membrane with over lap of minimum 50mm

as protective medium before screed concrete or landscaping works

Providing and laying screed concrete of M20 grade of average 75mm

thickness with a minimum thickness of 50mm at drain points and a slope of

1:150 or required as per the site condition at all levels by admixing

necessary admixtures Conplast WL Xtra @ 200ml per bag of cement of

75 NS-128 Fosroc Chemicals. Treatment to continue along the vertical surface for sqm 2,572.51 - - 249.17 6,40,991.35

300mm height in shape of round Chamfering, curing etc. If necessary, the

concrete shall be provided with groove cutting of 6mm x 10mm at every 5m

x 5m area or as per the site condition, the joints shall be treated with

elastomeric sealants.

Sub the structural cracks to be treated with Conbextra EP10.

13 New Technology and material - - - - -

Providing and fixing false ceiling at all heights with integral densified

calcium silicate reinforced with fibre and natural filler false ceiling tiles of

Size 595x595mm of approved texture, design and patterns as per CPWD

Specification 2019, to be laid in true horizontal level suspended on inter-

locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick

(galvanized @ 120 grams per sqm including both sides)comprising of main-T

runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of

length 1200 mm and secondary intermediate cross-T of size 24x32 mm of

76 26.22 length 600mm to formgrid module of size 600 x 600 mm, suspended from - - - - - -

ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm)

i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto

1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed

with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both

25mm flange to pierce into 12x50mm or even bigger size dash fastener if

require, fixed with Glavanised iron perimeter wall angle or size

24x24x0.40mm of length 3000 mm to be fixed on periphey wall / partition

with the help of plastic rawl plugs at 450mm center to center and 40 mm

With 15 mm thick Tegular edged light weight calcium

sliciate false ceiling tiles

Signature of Contractor Page 9 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing & fixing false ceiling at all heights with GRG (Glass Fibre

Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved

texture, design and patterns having moisture content less than 2%,

humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non

combustible as per BS 476 (part 4)-1970 and light reflectance of 85%

(minimum) to be laid in true horizontal level suspended on inter-locking

metal T-Grid of hot dipped galvanised iron section of 0.33mm thick

(galvanized @ 120 grams per sqm including both sides) comprising of main-

T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm

of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of

length 600mm to form grid module of size 600 x 600 mm, suspended from

ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm)

i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully

threaded hanger rod upto 1000 mm length and L-shape level adjuster of size

77 26.26.2 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm sqm 2,571.74 2,078.55 - 53,45,490.18 - -

of length 3000 mm to be fixed on periphery wall / partition with the help of

plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood

screws. The work shall be carried out as per specifications, drawing and as

per directions of the Engineer-in-Charge.Providing & fixing false ceiling at all

heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size

595x595 mm of approved texture, design and patterns having moisture

content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per

IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light

reflectance of 85% (minimum) to be laid in true horizontal level suspended

on inter-locking metal T-Grid of hot dipped galvanised iron section of

0.33mm thick (galvanized @ 120 grams per sqm including both sides)

comprising of main-T runners of size 15x32 mm of length 3000 mm, cross -

T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T

of size 15x32 mm of length 600mm to form grid module of size 600 x 600

mm, suspended from ceiling using galvanised mild steel items (galvanizing

Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000

mm to be fixed on periphery wall / partition with the help of plastic rawl

plugs at 450 mm center to center and 40 mm long dry wall wood screws.

The work shall be carried out as per specifications, drawing and as per

directions of the Engineer-in-Charge.With fully perforated 12 mm thick micro

tegular edged or 10 mm thick square edged GRG false ceiling tiles.

Making khurras 45x45 cm with average minimum thickness of 5 cmcement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20

78 12.22 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm Each 19.98 325.02 - 6,493.90

cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,

rounding the edges and making and finishing the outlet complete.

14 Sanitary Installations - - - - - -

Note:-1. All Sanitarty fixture shal be low flow as mentioned below , where

flow/ flush rate of fixture shall be equivalent or lesser at 3 bar pressure( - - - - - -

2. water closet flushing cistern (dual flush 3/6) urinals 2 lpm faucets

(lavatory ,pantry,health) 6 lpm.

3.multiple sprinkler system native trees & vegetation shall be used. - - - - - -

4.over flow rain water storage & reuse on site of at least 75% of total

building water demand of 2 days shall be provide .

5. Desalting & grease trap system along with the proper flitation for rain

water recharging shall be provided.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with

100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, with manually controlled device (handle lever)

79 17.1.1 conforming to IS : 7231, with all fittings and fixtures complete, including Each 2.00 7,374.40 - 14,748.80 - -

cutting and making good the walls and floors wherever required: White

Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing white vitreous china extended wall mounting water

closet of size 780x370x690 mm of approved shape including providing &

fixing white vitreous china cistern with dual flush fitting, of flushing capacity

3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and

cistern fittings, nuts, bolts and gasket etc

Signature of Contractor Page 10 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require :

White Vitreous China Wash basin size 630x450 mm with a

single 15 mm C.P. brass pillar tap

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS :

13983 with C.I. brackets and stainless steel plug 40 mm, including painting

of fittings and brackets, cutting and making good the walls wherever

82.1 17.10.1 Kitchen sink with drain board - - - - - -

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality &

make and as per the direction of Engineer-in-charge.

Providing & fixing PVC waste pipe for sink or wash basin including PVC waste

fittings complete

Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with

85 NS-41 swinging spout complete. Including cutting and making good the walls Each 76.00 - - 5052.61 - - 3,83,998.36

wherever required .

86 NS-42 Providing and Fixing of C.P. Brass Shower set comprising of : - - - - - -

86.1 One No. CP brass Single Lever Concealed Diverter . - - - - - -

86.2 One No. CP brass OH shower head & Shower Arm . - - - - - -

86.3 One No. CP brass Bath Spout. - - - - - -

86.4 Including cutting and making good the walls wherever required. - - - - - -

86.5 Shower set as described above. Each 142.00 - - 7786.55 - - 11,05,690.10

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of

approved quality) complete with 6mm thick hard board ground fixed to

wooden cleats with CP brass screws and washers complete.

88 17.34 Providing and fixing toilet paper holder : - - - - - -

Providing and fixing PTMT towel rail complete with brackets fixed to

89 17.73 wooden cleats with CP brass screws with concealed fittings arrangement of - - - - - -

approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 gms

Providing and fixing health faucet with 1 m long flexible tube and wall hook

including all fittings approved quality.

Providing & fixing CP brass bib cock of approved quality conforming IS 8931:

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing CP brass angle valve for basin mixer and geyser points

of approved quality confirming IS: 8931:

Providing and fixing white vitreous china battery based infrared sensor

operated urinal of approx. size 610 x 390 x 370 mm having pre & post

94 17.80 flushing with water (250 ml & 500 ml consumption), having water inlet from Each 21.00 8,695.41 - 1,82,603.61 - -

back side, including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer-in-charge.

Providing and fixing stainless steel grating approved quality and colour.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall - - - - - -

96.1 18.7.1 15 mm nominal outer dia Pipes Metre - 312.55 - - - -

96.2 18.7.2 20 mm nominal outer dia Pipes Metre 144.00 365.08 - 52,571.52 - -

96.3 18.7.3 25 mm nominal outer dia Pipes Metre 848.00 437.60 - 3,71,084.80 - -

96.4 18.7.4 32 mm nominal outer dia Pipes Metre 176.00 565.31 - 99,494.56 - -

Signature of Contractor Page 11 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This

97 18.8 includes jointing of pipes & fittings with one step CPVC solvent cement and - - - - - -

the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls

97.1 18.8.1 15 mm nominal outer dia Pipes Metre - 542.48 - - - -

Providing and placing on terrace (at all floor levels) polythene water storage

tank of approved brand and manufacture with cover and suitable locking

98 18.48 arrangement and making necessary holes for inlet , outlet and overflow Litre - 11.98 - - - -

pipes but without fittings and the base support for tank.

Providing and fixing forged brass ball valve of brass body with hard

99 NS-46 chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome plated - - - - - -

centre handle with female BSP threads complete in all respects.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

DSR E&M rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

18.11 washers, gaskets conforming to IS 13095 of following sizes as required :

Providing and fixing G.I. pipes complete with GI fittings and clamps

including cutting and making good the wall etc.

Internal work - Exposed on Wall - - - - - -

GI Pipe - - - -

Painting G.I. pipes and fittings with synthetic enamel white paint with two

102 18.38 coats over a ready mixed priming coat, both of approved quality for new - - - - -

18.38.6 50 mm dia nominal bore Metre 119.00 55.57 - 6,612.83 -

Providing and fixing G.I. Union in G.I. pipe including cutting and threading

the pipe and making long screws etc. complete (New work) :

Signature of Contractor Page 12 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing and fixing toilet cubical systems of Greenlam Sturdo make of

Classique Grandeur - Invincible model and manufactured in standard

dimensions of 1500mm x 1000mm x 2400mm or of customized size as

required / as per site with 12mm thick solid Compact Laminate panels made

of KRAFT paper impregnated with Phenolic resins under high pressure and

temperature, including doors, pilasters & intermediate panels, which should

be resistant to heat, bacteria, water, chemical, scratch and impact. Finished

product should be as per approved texture, shade & drawing detailing and

developed according to IS-2046 and BS-476/97 standards. The toilet cubicle

setup shall include necessary hardware fittings, made out of stainless steel

(Grade-316), as per manufacturer’s specifications and approved by project

manager. Hardware fittings should consist of (1) Stainless steel Door

knob.(2) Stainless steel Gravity hinges (3 nos.) not less than 75mm length

and weight not less than 210 grams.(3) Stainless steel Thumb-turn lock set

with indicators.(4) Stainless steel Coat hook with nylon door stopper.(5)

Stainless steel U-channels of 20 gauge and 12X20mm size.(6) Stainless

steel Adjustable foot/pedestal to give 150mm clearance from bottom and of

weight not less than 600grams.(7) Stainless steel Top rail pipe(OD:24mm of

18 gauge) with corner connectors.(8) Stainless Steel Head Rail Tubular

Holder of weight not less than 200 grams.(9) Rubber noise deafening

tape.(10) Stainless steel Screws and wall plugs.The top fitting arrangement

shall comprise of stainless steel (round) top rail, fixed to pilasters and

stainless steel tubular holder. Stainless steel wall fixing roses shall be used

on the wall to hold the top rail. In absence of block walls, stainless steel

corner bends (connected to the top rail) will be used on the corners of the

cubicle. All screws should be of stainless steel (Grade-304). All pilasters will

be supported by stainless steel adjustable foot. The base of the stainless

steel bottom cladding will be anchored to the floor with a clearance height of

150mm.The intermediate panel shall be of one continuous panel without any

joint. All visible edges will be chamfered,The height of the panel shall be

measured exclusive of bottom clearance of 150 mm. All complete to the

entire satisfaction of Project Manager

15 Internal firefighting work - - - - -

Supplying, installation, testing and commissioning of electric driven terrace

105 18.4 pump suitable for automatic operation and consisting of following, complete - - - - -

in all respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal pump of cast iron body and bronze

a. impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. - - - - -

Suitable HP squirell cage induction motor TEFC type suitable for operation on

415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for

enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming

M.S. fabricated Common base plate, coupling, coupling guard, foundation

bolts etc. as required.

Suitable cement concrete foundation duly plastered with anti vibration pads.

106 Terrace Fire Pump Panel for 450Lpm pump - - - - -

(All MCB shall be suitable for motor duty & with heavy duty detachable solid

1 no of 40 A TP MCB of 10 KA breaking capacity with heavy duty solid

106.2 neutral link for 1 no 7.5 HP motor along with following for each outgoing - - - - -

motor starter feeder.

106.3 DOL Starter with 25 A contactor with 2 NO and 2NC auxillary contacts. - - - - -

Over load relay of rating 10-16 A with in built single phasing preventer.

106.5 Ammeter of range 0-40A with Ammeter Selector Switch - - - - -

One set of AMBER indication with 2A SP MCB as back up, Start, Stop Push

106.6 button illuminated type with remote control start, stop arrangement, Auto/ - - - - -

manual/ off selector switch.

1 no 6 A DP MCB of 10 KA breaking capacity looped with incomer side of 40

Terrace Fire Pump Panel as described above shall be complete with all Set

106.8 NS-44 interconnections, risers, internal wiring, labels, terminal blocks etc. complete - - - - -

107 Terrace Fire Pump Panel for 900Lpm pump 2.00 - - 29,487.60 - 58,975.20

(All MCB shall be suitable for motor duty & with heavy duty detachable solid

Signature of Contractor Page 13 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

1 no of 63A TP MCB of 10 KA breaking capacity with heavy duty solid neutral

107.2 link for 1 no 12 HP motor along with following for each outgoing motor - - - - -

starter feeder.

Star delta Starter with 25 A contactor with 2 NO and 2NC auxillary contacts.

Over load relay of rating 10-16 A with in built single phasing preventer.

107.5 Ammeter of range 0-40A with Ammeter Selector Switch - - - - -

One set of AMBER indication with 2A SP MCB as back up, Start, Stop Push

107.6 button illuminated type with remote control start, stop arrangement, Auto/ - - - - -

manual/ off selector switch.

1 no 6 A DP MCB of 10 KA breaking capacity looped with incomer side of 40

Terrace Fire Pump Panel as described above shall be complete with all Set

107.8 NS-45 interconnections, risers, internal wiring, labels, terminal blocks etc. complete 1.00 - - 34,114.80 - 34,114.80

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees,

flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete as required :

(FOR INTERNAL HYDRANT SYSTEM)

Supplying and fixing single headed internal hydrant valve with instantaneous

Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI

marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless

Steel cap and chain as required :

109.1 18.9.2 Single headed Stainless steel Set 21.00 - 7,113.52 - 1,49,383.92 -

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095 of following sizes as required :

Supplying and fixing Orifice plate made out of 6mm thick stainless

steel(Grade 304) with orifice of required size to be fitted between flange &

landing Valve of External and Internal hydrant to reduce pressure at the

outlet to the level of 3.5Kg/cm2 complete as required

Providing, installation, testing and commissioning of non-return valve of

112 18.14 following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, - - - - - -

nuts,washers etc.as required :

Providing, installation, testing and commissioning of stainless steel Y-

113 18.15 strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with - - - - - -

3 mm dia holes with stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long RRL hose

pipe with 63 mm dia male and female couplings duly

bound with GI wire, rivets etc. conforming to IS 636

(type-A) as required :

Supplying & fixing 63 mm dia gun metal short branch

pipe with 20 mm nominal internal diameter size nozzle

115 18.18 conforming to IS 903 suitable for instantaneous - - - - -

connection to interconnect hose pipe coupling as

Supplying and fixing first-aid Hose Reel with MS construction spray painted

116 18.17 in post office red, conforming to IS 884 complete with the following as - - - - - -

20 mm nominal internal dia water hose thermoplastic (Textile reinforced)

type -2 as per IS: 12585

116.2 20 mm nominal internal dia gun metal globe valve & nozzle. - - - - - -

Signature of Contractor Page 14 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

116.3 Drum and brackets for fixing the equipmets on wall. - - - - - -

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and

Supplying and fixing of fire brigade connection of

cast iron body with gun metal male instantaneous inlet

117 18.19 couplings complete with cap and chain as reqd. for - - - - -

suitable dia MS pipe connection conforming to IS 904

Supplying and fixing air vessel made of 250 mm dia, 8

mm thick MS sheet, 1200 mm in height with air release

valve on top and flanged connection to riser, drain

118 18.2 arrangement with 25 mm dia gun metal wheel valve Set 4.00 - 21,140.09 84,560.36 -

with required accessories, pressure gauge and

paintingwith synthetic enamel paint of approved shade

Providing and fixing carbon-di-oxide type fire extinguishers consisting of

pressure tested single cast cylinder with rotary discharge valve and high

pressure discharge tube of minimum 1 m length, discharge horn, suspension

bracket conforming to IS:15683 finished externally with red enamel paint

and fixed to wall with brackets complete with internal charge (Halon Free

Providing and fixing carbon-di-oxide fire extingushers trolley mounted with

all accessories internal discharge tube,high pressure discharge

hose,discharge nozzle, ISI marked as per IS:2878 finished externally with

red enamel paint. (Halon Free Gas)

Providing and fixing ABC Powder type fire extinguishers consisting of welded

M.S. cylinderical body, squeeze lever discharge valve fitted with pressure

indicating guage internal discharge tube 30 cms long high pressure

121 NS-49 discharge hose, discharge nozzle, suspension bracket conforming to - - - - - -

IS:15683 finished externally with red enamel paint and fixed to wall with

brackets complete with internal charge. (Halon Free Gas)

Providing and fixing forged brass ball valve of brass body with hard chrome

112 NS-46b plated steel ball inside PTFE (Teflon) seat & ring with chrome plated centre - - - - - -

handle with female BSP threads complete in all respects.

Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. Sheet

with single or double glazed front door (with 4 mm thick glass) and locking

arrangement, painted fire red with stove enamelled paint "FIRE HOSE"

written on front including necessary supports approximate size.

16 Façade Work - - - - - -

Providing and supplying aluminium extruded tubular and other aluminium

sections as per the architectural drawings and approved shop drawings , the

aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including

super durable powder coating of 60-80 microns conforming to AAMA 2604 of

required colour and shade as approved by the Engineer-in-Charge. ( The

114 25.1 item includes cost of material such as cleats, sleeves, screws etc. necessary Kg 1,398.98 451.48 - 6,31,611.49 - -

for fabrication of extruded aluminium frame work. Nothing extra shall be

paid on this account). The weight of aluminium extruded section shall be

taken for purpose of payment.

Signature of Contractor Page 15 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Designing, fabricating, testing, protection, installing and fixing in position

semi (grid) unitized system of structural glazing (with open joints) for linear

as well as curvilinear portions of the building for all heights and all

levels,including:(a) Structural analysis & design and preparation of shop

drawings for the specified design loads conforming to IS 875 part III (the

system must passed the proof test at 1.5 times design wind pressure

without any failure), including functional design of the aluminum sections for

fixing glazing panels of various thicknesses, aluminium cleats, sleeves and

splice plates etc. gaskets, screws,toggles, nuts, bolts, clamps etc., structural

and weather silicone sealants,flashings, fire stop (barrier)-cum-smoke seals,

microwave cured EPDM gaskets for water tightness, pressure equalisation &

drainage and protection against fire hazard including : (b) Fabricating and

supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5

brackets of required sizes, sections and profiles etc. to accommodate 3

Dimentional movement for achieving perfect verticality and fixing structural

glazing system rigidly to the RCC/masonry/structural steel framework of

building structure using stainless steel anchor fasteners/ bolts,nylon

seperator to prevent bimetallic contacts with nuts and washers etc. of

stainless steel grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and

one part weather silicone sealant compatible with the structural silicone

sealant of required bite size in a clean and controlled factory / work shop

environment,including double sided spacer tape, setting blocks and backer

rod, all of approved grade, brand and manufacture, as per the approved

sealant design,within and all around the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm

thick and of sizes, shapes and profiles, as required as per the site

conditions,to seal the gap between the building structure and all its

interfaces with curtain glazing to make it watertight.(e) Making provision for

drainage of moisture/ water that enters the curtain glazing system to make

it watertight, by incorporating principles of pressure equalization,providing

suitable gutter profiles at bottom (if required), making necessary holes of

required sizes and of required numbers etc. complete. This item includes

cost of all inputs of designing, labour for fabricating and installation of

aluminium grid, installation of glazed units, T&P, scaffolding and other

incidental charges including wastages etc., enabling temporary structures

and services, cranes or cradles etc. as described above and as specified. The

item includes the cost of getting all the structural and functional design

including shop drawings checked by a structural designer, dully approved by

Engineer-in-charge. The item also includes the cost of all mock ups at site,

cost of all samples of the individual components for testing in an approved

laboratory, field tests on the assembled working structural glazing as

specified, cleaning and protection till the handing over of the building for

occupation. In the end, the Contractor shall provide a water tight structural

glazing having all the performance characteristics etc. all complete as

required, as per the Architectural drawings, as per item description, as

specified, as per the approved shop drawings and as directed by the

Engineerin- Charge.

Signature of Contractor Page 16 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Note:- 1. The cost of providing extruded aluminium frames, shadow

boxes,extruded aluminium section capping for fixing in the grooves of the

curtain glazing and vermin proof stainless steel wire mesh shall be paid for

separately under relevant items under this sub- head. However, for the

purpose of payment, only the actual area of structural glazing (including

width of grooves) on the external face shall be measured in sqm. up to two

decimal places. Note:-2. The following performance test are to be conducted

on structural glazing system if area of structural glazing exceeds 2500 Sqm

from the certified laboratories accreditated by NABL(National Accreditation

Board for Testing and Calibration Laboratories), Department of Science &

Technologies, India. Cost of testing is payable separately. The NIT approving

authority will decide the necessity of testing on the basis of cost of the work,

cost of the test and importance of the work. Performance Testing of

Structural glazing system Tests to be conducted in the NABL accredited lab

or by any other accreditation body which operates in accordance with ISO/

IEC 17011 and accredits labs as per ISO/ IEC 17025.1. Performance

Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to

+300pa) as per ASTM E-283-04 testing method for a range of testing limit 1

to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per

ASTME- 331-09 testing method for a range up to 2000 ml. 3. Dynamic

Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method

for a range upto 2000 ml 4. Structural Performance Deflection and

deformation by static air pressure test (1.5 times design wind pressure

without any failure) as per ASTME-330- 10 testing method for a range upto

50 mm 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09

testing method for Qualitative test, Tests to be conducted on site. 6. Onsite

Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto

Providing, assembling and supplying vision glass panels (IGUs) comprising of

hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel

units of size and shape as required and specified, comprising of an outer

heat strengthened float glass 6 mm thick, of approved colour and shade with

reflective soft coating on surface # 2 of approved colour and shade, an inner

Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm wide,

dessicants, including primary seal and secondary seal (structural silicone

sealant) etc. all complete for the required performances, as per the

Architectural drawings, as per the approved shop drawings, as specified and

as directed by the Engineerin- Charge. The IGUs shall be assembled in the

116 25.3 factory/ workshop of the glass processor. (Payment for fixing of IGU Panels Sqm 1,285.15 4,052.50 - 52,08,070.38 - -

in the curtain glazing is included in cost of item No.25.2)

payment, only the actual area of glass on face # 1 of the glass panels

(excluding the areas of the grooves and weather silicone sealant) provided

and fixed in position, shall be measured in sqm.

(i) Coloured tinted float glass 6 mm thick substrate with reflective

softcoating on face # 2, + 12 mm Airgap + 6 mm Heat Strengthened clear

Glass of approved make having properties as visible Light transmittance

(VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection

external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to

Extra for openable side / top hung vision glass panels (IGUs) including

providing and supplying at site all accessories and hardwares for the

openable panels as specified and of the approved make such as heavy duty

stainless steel friction hinges, min 4 -point cremone locking sets with

stainless steel plates, handles, buffers etc. including necessary stainless

steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the

Architectural drawings, as per the approved shop drawings, as specified and

as directed by the Engineer- in-Charge.

Providing, fabricating and supplying shadow box of required size and shape, for fixing in

the spandrel portion of the structural glazing, in linear as well as curvilinear portions of

the building by providing semi -rigid, inorganic, noncombustible fibre glass wool

insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer

shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of

118 25.5 black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not Sqm 392.00 2,353.50 - 9,22,572.00 - -

less than 60 gm / sqm, made of randomly oriented glass fibres distributed in a binder by

a wetlay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6

mm thick cement board including SS rivets, nuts, bolts, washers etc complete.

Signature of Contractor Page 17 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick

heat strengthened monolithic float glass of approved colour and shade with

reflective soft coating on surface # 2 of approved colour and shade so as to

match the colour and shade of the IGUs in the vision panels etc. ,all

complete for the required performances as specified, as per the Architectural

drawings, as per the approved shop drawings, as specified, and as directed

by the Engineer- in- Charge.

For payment, only the actual area of glass on face # 1 of the glass panels

119 25.6 (but excluding the area of grooves and weather silicone sealant) provided Sqm 392.00 2,670.08 - 10,46,671.36 - -

and fixed in position, shall be measured in sqm. (Payment for fixing of

Spandrel Glass Panels in the curtain glazing is included in cost of relevent

Item*).“(i) Coloured tinted float glass 6 mm thick substrate with reflective

soft coating on face # 2, having properties as visible Light transmittance

(VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection

external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to

3.3 W/m2 K etc. . The properties of performance glass shall be decided by

technical sanctioning authority as per the site requirement.

Design supply & installation of suspended Spider Glazing system designed

to withstand the wind pressure as per IS 875 (Part-III). The Suspended

System held with Spider Fittings of SS-316 Grade Steel of approved

manufacturer with glass panel having 12 mm thick clear toughened glass

held together with SS- 316 Grade Stainless steel Spider & bolt assembly

with laminated glass fins 21 mm thick. The Glass fins and glass panel

assembly shall be connected to Slab/beams by means of SS- 316 Grade

stainless steel brackets & Anchor bolts and at the bottom using SS channel

of 50x25x2mm using fastener & anchor bolts, non staining weather sealants

of approved make, Teflon/ nylon bushes and separators to prevent bi-

metallic contacts, all complete to perform as per specification and approved

drawings. The complete system to be designed to accommodate thermal

120 25.8 expansion & seismic movements etc. The joints between glass panels (6 to 8 Sqm 26.00 10,355.28 - 2,69,237.28 - -

mm) and gaps at the perimeter & in U channel of the assembly to be filled

with non staining weather sealant, so as to make the entire system fully

water proof & dust proof.

The rate shall include all design, Engineering and shop drawing including

approval from structural designer, labour, T&P, scaffolding, other incidental

charges including wastage, enabling temporary

services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors,

SS channel laminated glass etc. all complete. For the purpose of payment,

actual elevation area of Glazing including thickness of joints and the portion

of Glass panel inside the SS

channel shall be measured.

Designing, fabricating, testing, installing and fixing in position Curtain Wall

with Aluminium Composite Panel Cladding, with open grooves for linear as

well as curvilinear portions of the building , for all heights and all levels etc.

(a) Structural analysis & design and preparation of shop drawings for

pressure equalisation or rain screen principle as required, proper drainage of

water to make it watertight including checking of all the structural and

functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium

composite panel cladding in pan shape in metalic colour of approved

consisting of 3 mm thick FR grade mineral core sandwiched between two

Aluminium sheets (each 0.5 mm thick). The aluminium composite panel

121.2 cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon - - - - - -

based fluoropolymer resin coating of approved colour and shade on face# 1

and polymer (Service) coating on face# 2 as specified using stainless steel

screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods

Signature of Contractor Page 18 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

(c) The fastening brackets of Aluminium alloy 6005 T5 I MS with Hot Dip

Galvanised with serrations and serrated washers to arrest the wind load

movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS

316, Nylon separators to prevent bi-metallic contacts all complete required

to perform as per specification and drawing The item includes cost of all

material & labour component, the cost of all mock ups at site, cost of all

samples of the individual components for testing in an approved laboratory,

field tests on the assembled working curtain wall with aluminium composite

panel cladding, cleaning and protection of the curtain wall with aluminium

composite panel cladding till the handing over of the building for occupation.

Base frame work for ACP cladding is payable under the relevant aluminium

items. The Contractor shall provide curtain wall with aluminium composite

panel cladding, having all the performance characteristics all complete , as

per the Architectural drawings, as per item description, as specified, as per

the approved shop drawings and as directed by the Engineer-in-Charge.

However, for the purpose of payment, only the actual area on the external

face of the curtain wall with Aluminum Composite Panel Cladding (including

width of groove) shall be measured in sqm. up to two decimal places.

17 Interior Work - - - - - -

Providing & Fixing Wall Panelling with fluted MDF fixed to MR ply wood fixed

122 NS-1 to wooden frame as shown drawings. Sqm 318.63 - - 11,270.20 - - 35,91,023.83

Providing & fixing 12mm thick AC-5 core grade Laminated wooden. The

flooring to be laid with 6mm PU underlay on over double layer of 12mm thick

waterproof ply and 50mm thick polyester fibber isolation of 1000 GSM

bellowing the adjusting laid floor.

Providing & fixing 12mm thick AC core grade Laminated wooden flooring

Skirting to be laid with 6mm PU underlay on over double layer of 12mm

thick waterproof ply and 50mm thick polyester fibber isolation of 1000 GSM

belowin the adjusting laid floor.

Providing and tuffted low loop pile Carpet flooring 8mm made up of 100%

nylon ,solution dyed. The carpet tile should have as per EN-1307 class -32

suitable for general commercial applicable in its category.the carpet tiles

with technical specification

Providing & fixing of Acoustic Panelling (AP-03) made up of 50mm

x25mm x 2mm GI frame fixing with necessary arrangements as required

fixing at a distance grid of 600mm c/c in both the directions fixing to the

slab/wall of the building and supported with fasteners, angles etc as per site

requirements and covered with 12mm thick Acoustic panelling finished in

line and level with joints to be cleaned filled and as per details showing in

Elevation drawing. The work includes provision of any required opening for

126 NS-5 MEP services etc. Rate is inclusive of cost of materials, providing patterns, Sqm 533.82 - - 3,460.69 - - 18,47,385.54

provision of any required opening for MEP services etc all necessary

hardware, cutting, labour, scaffolding all lead and lifts at all levels, loading

and unloading, transportation and all other incidental charges etc. completed

in all respect as per drawing, designs and as directed by the Engineer-in-

Providing & Fixing Veneer Panelling with to 12mm thick marine ply &

127 NS-6 finished in matt finish PU Polish as per direction engineer in charge. Sqm 124.91 - - 3,258.58 - - 4,07,029.23

128 NS-7 providing and fixing Wall paper as per direction of engineer incharge. Sqm 1,780.50 - - 1,806.48 - - 32,16,437.64

Providing & making cove to profile- Indirect lighting patta in gypsum

with125 mm vertical & 100 mm horizontal space to keep Perimeter LED

129 NS-8 light.Rate to include both vertical bands of the cove and both horizontal Sqm 88.34 - - 1,114.34 - - 98,440.80

bands of 50 mm as per detail provided by the designer. Edges to be perfectly

alligned & straight.

Providing & fixing of prefabricated WPC slatted panels in melamine walnut

finish (25mm thick) on a system of GI support as per support requirements.

130 NS-9 Provision to be left above the false ceiling for HVAC and MEP conduiting as Sqm 935.50 - - 6,014.68 - - 56,26,733.14

per MEP drawings

Signature of Contractor Page 19 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing & fixing (S.S Railing with glass,) - side mounted supply and

installation of model make or equivalent,SS 304 grade 900mm high railing

made of SS 304 grade handrail pipe of 50mm OD and 1.6mm thickmess

polish with automatic round polish machine to get a uniform hairline finish

k240 mounted with help of adjustable solid neck support on balustrade of

approved design at 900mm center to center,(or actual division as per site

131 NS-10 condition), fitted with four Nos, solid glass connectors for holding the infill Sqm 225.46 - - 5,671.38 - - 12,78,669.33

glass of 12mm, thick toughened and laminateed, glass connector to be

fuited with balustrade with the help of s.s screw overall mounted on s.s 304

grade solid base plate 100mm x 8mm with the help of dash fastners

(HILTI/FISCHER make).

Vertical Blinds made of glass fibre fabrics in width 5” (or 4”). Minimum

overlapping of ¾” in fabric. Top aluminium anodized rail of 1.4 mm

thickness. 2 inch wide channel with front lamination of same fabric. Runners

132 NS-11 having stainless steel hooks with built-in shock spring and self aligning slip - - - - - -

clutch. End control box composed of double gear system. Stainless steel

spacers. Botton weight fully plastic covered linked with plastic bead chain.

Wall design Vinyl frosted self adhesive privacy glass film and heat control

for office glass partition/glass door etc

Providing and fixing mirror of superior glass of minimum 6mm thickness (of

134 NS-13 approved quality) and of required shape and size with plastic moulded frame Sqm 32.65 - - 13,083.20 - - 4,27,166.48

of approved make and shade with 6 mm thick hard board backing

18 LIFT Elevator - - - - - -

Design, manufacture, Supply, Installation, Testing & Commissioning of 13

passenger gearless lift electric traction, (MRL) MACHINE ROOM LESS having

135 contract speed of 1.5 Meter per second serving different floors as per - - - - - -

detailed specifications attached and as under complete with all the

equipment and accessories as per latest IS Code:

Lift shaft size 1800 mm (Width) x 2400 mm (Depth) and 1600 mm pit depth.

135.3 Stop & Opening - 04 Stop & 04 Opening (all opening be on same side) - - - - - -

135.4 Controller - V3F (Variable Voltage Variable Frequency) - - - - - -

Automatic Rescue Device (ARD) complete with dry maintenance free

batteries as required.

135.6 Operation - Microprocessor based Duplex control - - - - - -

135.7 Power: 415 Volts ± 10%, 3 Phase 4 wire 50 Hz AC system. - - - - - -

135.8 Car Enclosure: Stainless steel (Hairline Finish) - - - - - -

135.9 Car doors: Stainless steel (Hairline Finish) - - - - - -

135.10 Landing doors: Stainless steel (Hairline Finish) - - - - - -

135.11 Car entrance door opening arrangement: CO (Center Opening Doors) - - - - - -

135.12 Handrail on rear wall of car in SS hairline Finish - - - - - -

135.13 Full length Mirror on rear wall of car - - - - - -

Lifts should be with following: Voice announcement system, Car Arrival

Chime, DC alarm bell, Multi beam sensor, Safety landing operation, Next

landing operation, Independent operation, Hand operation (slow speed

maintenance operation), Braille Buttons, Emergency stop button, Emergency

cabin lighting, Emergency interphone system incorporated on cabin

operating panel, Re-open with hall call button operation, Automatic door

135.14 open time adjustment operation, Car call registered light, Hall call registered - - - - - -

light, Emergency Exit, Ventilation Fan, Overload Indicator, Attendant

Service, Emergency Landing Device, flat cable with camera and internal

intercom. Car operating panel and car position indicator face plates finish:

LED Indicator Provided in stainless steel hairline finish.

Residential Block- Shaft Size (2400 Wx 2600 D)/13 Passenger-01 Nos - 05

Residential Block- Shaft Size (2400 Wx 2600 D)/8Passenger-01 Nos - 03

Admin Block- Shaft Size (2400 Wx 2600 D)/ 13 Passenger-02 Nos -04 Stop

Training Block- Shaft Size (2400 Wx 2600 D)/ 13 Passenger -02 Nos -06

Signature of Contractor Page 20 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Manufacturing, supplying and fixing signage board .Providing and fixing

signages on the wall or with any other required structure . Each signboard to

be fixed strictly as per the Harmonised Guidelines & Space Standards for

136 Barrier Free Built Environment for persons with Disability, issued By MOUD, - - - - - -

Govt. of India, and as as per approved drawings and complete as per the

directions of Engineer – In – Charge.

136.1 NS-1 Light board with Tube Light and frame 5.00 - - 4,133.91 - - 20,669.55

136.6 NS-6 Laminited White board Sqm 8.00 - - 6,921.38 - - 55,371.04

Supply and fixing of vinyl stickering with colour printing on 4mm thick

acrylic sheet as per design suggested by the engineer in charge.

Providing fabricating and fixing of signages of varying sizes and shapes using

three mm thick PVC sheet at base with self addhesive coloured vinyl with

graphicson top of glow tape complete including fixing on wall with screws

138 NS-8 and washers or hanging on ceiling with GI chain/GI Bar complete as per Sqm 2.00 - - 25,754.45 - - 51,508.90

technical specifications and directions of Engineer.

Providing and fixing of signages of varying sizes and shapes using stainless

steel sheet of minimum 16G thickness brush finish including

139 NS-9 engraving/etching of letters of required size filled with colour as desired by Sqm 2.00 - - 30,045.70 - - 60,091.40

engineer,fixing with ss screws on walls.

Providing and installing in position the following type of sign boards made

out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-

140 NS-10 reflective self adhesive vinyle painted foam board, complete with mirror Sqm 1.00 - - 15,227.00 - - 15,227.00

Fire exit sign with arrow indicating the way to escape route shall be provided

at suitable height from floor level on the ceiling & shall be illuminated by

electric light with two hours battery backup to be considered.The fire exit

141 NS-11 signage shall have provision to provide external power .The lettering size Each 2.00 - - 1,384.28 - - 2,768.56

shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm

142 20 Kitchen Equipments - - -

143 Grinding - -

144 Main Kitchen - -

144.5 M06 SS Masala Trolley With Box 2 2.00 - - 27137.29 54,274.58

144.7 M08 Dust Bin Paddle Operated 2 2.00 - - 11307.21 22,614.42

144.13 M13 SS 4x Container Batter Table With U/S 1 1.00 - - 27891.11 27,891.11

144.18 M14d Green Tabet For Combi Oven 1 1.00 - - 15377.80 15,377.80

144.19 M14f Blue Tabet For Combi Oven 1 1.00 - - 13870.17 13,870.17

144.20 M15 SS Stand For Combi Oven With GN Pans Provision 1 1.00 - - 48244.06 48,244.06

Signature of Contractor Page 21 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

144.29 M23 SS Hand Wash Unit With Soap Dispenser & Paper Towel Holder 1 1.00 - - 31660.17 31,660.17

145.1 D01 SS Loading Table With 2x Sink 1 1.00 - - 39198.30 39,198.30

145.4 D03a Chemicals For Diswasher 20 Ltrs 2 2.00 - - 9083.46 18,166.92

146 D06 SS Soiled Dish Landing Table With Chute, Glass Rack & 2 U/S 1 1.00 - - 43721.18 43,721.18

147 Servery - -

SS Bain Marie With 3x 1/1 2x 1/2 Gn Pans & U/S,Tray Slider,Sneeze Guard

147.2 S02 SS Side Table With Spoon Sterilizer, U/S,Tray Slider,Sneeze Guard 2 2.00 - - 72366.10 1,44,732.20

STILT FLOOR - - - -

148 Receiving - -

149.2 PR02 Vegetable Cutter With 6 Blades 1 1.00 - - 211067.78 2,11,067.78

149.3 PR03 Chopping Board Red & Green 2 2.00 - - 6784.33 13,568.66

149.6 PR06 Chopping Board Sanitizer Sink 1 1.00 - - 31660.17 31,660.17

149.9 PR09 Dust Bin Paddle Operated 1 1.00 - - 11307.21 11,307.21

Supply of Exhaust Hood for BULK BURNER will be

fabricated in 1mm SS 202 sheet with ANGLES for

joint with TIG welded for seamless finish. front

152.1 1 over- hang of the hood will be designed to capture 1 1.00 - - 113072.03 1,13,072.03

maximum exhaust air. The hood with wall mount

detachable drain collector pan with book fold

baffle filters.

Signature of Contractor Page 22 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Supply of Exhaust Hood for 3 BURNER RANGE will

be fabricated in 1mm SS 202 sheet with ANGLES

for joint with TIG welded for seamless finish. front

152.2 2 over- hang of the hood will be designed to capture 1 1.00 - - 81411.86 81,411.86

maximum exhaust air. The hood with wall mount

detachable drain collector pan with book fold

baffle filters.

Supply of Exhaust Hood for HOT PLATES AND

OVEN will be fabricated in 1mm SS 202 sheet with

ANGLES for joint with TIG welded for seamless

152.3 3 finish. front over- hang of the hood will be 1 1.00 - - 195991.51 1,95,991.51

designed to capture maximum exhaust air. The

hood with wall mount detachable drain collector

pan with book fold baffle filters.

SUPPLY OF CENTRIFUGAL EXHAUST BLOWER

With Crompton motor.

Evaparative air cooler Model:- TRP 8 Make COOL

BREEZ. Capacity 8,000 cfm with 1.5 hp,1ph motor.

Exhaust and Fresh air fabricated ducting in 22 swg

GI JSW sheets .

Supply of air grills and volume control dampers with

152.8 8 MS Angle frames and supports for ducting 300 300.00 - - 188.46 56,538.00

Control panel for exhaust and fresh air unit with star

152.9 9 delta connection, current, voltage protection 1 1.00 - - 63320.33 63,320.33

Erection and Commissioning of Hoods, Blower and

Frehair Unit with Vibration Isolators, Canves

connections, Outlet Mesh for Birds protection, with

necessort Threaded Rods and nut bolts for hood

153 Fire Suppresion

153.1 1 H1 Exhaust Hood- Wall Type- (Length 1524 mm) 1 1.00 - - 399521.16 3,99,521.16

153.2 2 H2 Exhaust Hood- Wall Type- (Length 1981 mm) 1 1.00 - - 437211.83 4,37,211.83

153.3 3 H3 Exhaust Hood- Wall Type- (Length 1676 mm) 1 1.00 - - 399521.16 3,99,521.16

153.4 4 H4 Exhaust Hood- Wall Type- (Length 1828 mm) 1 1.00 - - 399521.16 3,99,521.16

25MM Tata /Jindal "C" Class Pipeline IS1239 MSERW

(Approxmimate RFT)

154.2 2 5 Cylinder Manifold C Class MSERW 2 2.00 - - 6852.85 13,705.70

154.4 4 Cylinder Flexible Pipes 10 10.00 - - 753.82 7,538.20

155 10 5feet Burner Flexible "Suraksha" 5 5.00 - - 753.82 3,769.10

155.2 12 25MM Gas Filter UNITED/VANAZ 1 1.00 - - 5756.39 5,756.39

155.3 13 25MM Flame Arrestor UNITED/VANAZ 1 1.00 - - 6441.68 6,441.68

Sub Total of Kitchen Equipment (20) - - - 92,04,758.31

21 Furniture Works - - - -

Signature of Contractor Page 23 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing and placing a High back chair with ergonomic design,

comfortable & aesthetically appealing of size 1250mm(height)X 500m

X600mm. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density

48kg/m³ and the back shall be made of plywood padded with high resilience

polyurethane foam having density 32kg/m³. The seat and back shall

be upholstered with leatherite tapestry 0.7mm thick and 535 GSM. The

backrest shall be made by keeping the natural curvature of the spine

which helps to provide full back support as well as head support. seat

156 NS-30-1 & Back. For seating durability the chair shall have torsion Bar 360 Each 7.00 - - 25,355.54 1,77,488.78

degree revolving mechanism and tilt tension adjustment which provides

back strength for the chair. The pneumatic seat height adjustment for

healthy seating, user can adjust seat height up to 100mm with class-4 gas-

lift to suit them using the lever under the seat. The Pedestal should have

five legged made of crome Base having pitch circle dia. 700mm fitted with

5 nos. twin wheel castors. The castors of the chair should be injection

moulded in black 30% glass filled nylon.

Providing and placing a High back chair with ergonomic design,

comfortable & aesthetically appealing of size 1250mm(height)X 500m

X600mm. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density

48kg/m³ and the back shall be made of plywood padded with high resilience

polyurethane foam having density 32kg/m³. The seat and back shall

be upholstered with leatherite tapestry 0.7mm thick and 535 GSM. The

backrest shall be made by keeping the natural curvature of the spine

which helps to provide full back support as well as head

157 NS-30-2 support.completely joint with seat & Back. For seating durability the Each 9.00 - - 21,792.06 1,96,128.54

chair shall have torsion Bar 360 degree revolving mechanism and

tilt tension adjustment which provides back strength for the chair. The

pneumatic seat height adjustment for healthy seating, user can adjust seat

height up to 100mm with class-4 gas- lift to suit them using the lever under

the seat. The Pedestal should have five legged made of crome Base having

pitch circle dia. 700mm fitted with 5 nos. twin wheel castors. The castors of

the chair should be injection moulded in black 30% glass filled nylon.

Leatherette, 3D Adjustable Armrests, Centre Tilt Synchro

Mechanism, 3 Pos Lock, Al. Die Cast Pedestal

Leatherette, 3D Adjustable Armrests, Centre Tilt Synchro

Mechanism, 3 Pos Lock, Al. Die Cast Pedestal

Leatherette, 3D Adjustable Armrests, Centre Tilt Synchro

160 NS-30-5 Mechanism, 3 Pos Lock, Al. Die Cast Pedestal Each 6.00 - - 24,670.26 1,48,021.56

Leatherette, 3D Adjustable Armrests, Centre Tilt Synchro

Mechanism, 3 Pos Lock, Al. Die Cast Pedestal

Leatherette, 3D Adjustable Armrests, Centre Tilt Synchro

Mechanism, 3 Pos Lock, Al. Die Cast Pedestal

Leatherette, 3D Adjustable Armrests, Centre Tilt Synchro

Mechanism, 3 Pos Lock, Al. Die Cast Pedestal

Active Bio-Synchro Mech with 5 position tilt limiter, 3 D

164 NS-30-9 Arms, Adjustable Lumbar, 5 position Tilt Limiter, Nylon Each 68.00 - - 12,088.43 8,22,013.24

Pedestal, Optional Headrest

Active Bio-Synchro Mech with 5 position tilt limiter, 3 D

165 NS-30-10 Arms, Adjustable Lumbar, 5 position Tilt Limiter, Nylon Each 146.00 - - 10,854.91 15,84,816.86

Pedestal, Optional Headrest

Active Bio-Synchro Mech with 5 position tilt limiter, 3 D

166 NS-30-11 Arms, Adjustable Lumbar, 5 position Tilt Limiter, Nylon Each 60.00 - - 10,854.91 6,51,294.60

Pedestal, Optional Headrest

Active Bio-Synchro Mech with 5 position tilt limiter, 3 D

167 NS-30-12 Arms, Adjustable Lumbar, 5 position Tilt Limiter, Nylon Each 5.00 - - 5,797.51 28,987.55

Pedestal, Optional Headrest

Active Bio-Synchro Mech with 5 position tilt limiter, 3 D

168 NS-30-13 Arms, Adjustable Lumbar, 5 position Tilt Limiter, Nylon Each 32.00 - - 5,797.51 1,85,520.32

Pedestal, Optional Headrest

Leatherette, 3D Adjustable Armrests, Centre Tilt Synchro

Mechanism, 3 Pos Lock, Al. Die Cast Pedestal

Signature of Contractor Page 24 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Centre to centre distance 560mm.Size: Total Height: 1050mm, Seat Height:

460mm, tablet H-570, Depth: 750mm ( Normal), After push back 925mm,

with tablet 1025mm, Width: 560mm.

• Push Back reclining / Fixed Back rest.

• Auto tip up cushion.

• Seat sizes available from Centre to Centre 21" to 24"

• PP injection moulded cushion and back cover.

• Cushion housing with acoustical perforation

• Armrest polished wooden / PU

• Wooden writing tablet with black membrane polish / laminated.

Pushback/with fixed auto tip up feature. PPCP injection moulded housing

for cushion & backrest. Moulded flame resistant & CFC free PU foam. Integral

skin moulded armrest with cup holder. Enough thigh and backrest support

170 NS-30-15 with wider seating area. All exposed sheet metal parts are powder coated. Each 255.00 - - 16,035.67 40,89,095.85

All fasteners are zinc coated. Usage of anchor- fasteners with high bonding

grouting material. Seat sr. Numbering on chair cushion. Chair structure is

made In combination of erw pipe & sheet metal.

Back/cushion is made up of polyurethane foam {P.U.) with density of 50±5

kg/m. Cloth- 60" W-1.20Mtr.

Total Weight 4.50 Kg / 5.25 Kg Model Dependant. Heavy Gague Prime steel

16g 2 Sheets in Box Type Construction. With Handle Support patti.

10mm Anchor Fasterners for Installation of chairs Paint: Epoxy Powder

Handles : PU Injection .

Medium Back Chair Providing and fixing Mesh Chair with Lumber Support,

Seat Size 510mm W x 510mm D, Back Size 480m W x 520mm Ht . The

chair comes with PP arms , Nylon base with 50mm castors . The chair has

171 NS-30-16 Push Back Mechanism .The chair comes with Pneumatic Gas Lift of Each 40.00 - - 13,568.64 5,42,745.60

Stroke=95 mm . Seat Height Minimum 480mm from Ground and Maximum

570mm. Overall size of the chair is 620 mm W x 680 mm D x (950 mm-

Chair Medium Back- Providing, supplying/ fabricating and placing/

Installation in position Medium back chair is slim and highly comfortable

conferencing seating solution for thinktanks. The seat and backrest of this

revolving chair build in chrome platted oval shape tubular section with

172 NS-30-17 intigrated lumber support maintained in design. The Seat and Backrest is Each 58.00 - - 13,568.64 7,86,981.12

one piece construction upholstered with quality leatherite stitched on PU

foam. The seat and backrest assembly fixed on center tilt mechanism having

two point tilt locking provision

SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr

with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu,

upholstered with fabric or leatherette.

BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

upholstered with fabric or leatherette.

UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot

173 NS-30-18 pressed plywood [moisture resistance & termite proof as per IS:303] & Each 14.00 - - 47,969.95 6,71,579.30

pinewood of cross sections devoid of major knots & surface defects. 6 nos.

per seat & 3.8mm Dia zigzag spring assembly is mounted over

understructure for cushioning purpose.

LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS

202) tube & plate with plastic endcap.

Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height

Signature of Contractor Page 25 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr

with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu,

upholstered with fabric or leatherette.

BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

upholstered with fabric or leatherette.

UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot

174 NS-30-19 pressed plywood [moisture resistance & termite proof as per IS:303] & Each 25.00 - - 65,787.36 16,44,684.00

pinewood of cross sections devoid of major knots & surface defects. 6 nos.

per seat & 3.8mm Dia zigzag spring assembly is mounted over

understructure for cushioning purpose.

LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS

202) tube & plate with plastic endcap.

Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height

Providing and supplying Stool / Chair for table . The stool has Wooden

Coloured base with foot support . It has plastic seat shell with Cushioned

175 NS-30-20 Seat wrapped in Leatherite / Fabric . Seat dimensions are 380 - 420 mm W x Each 147.00 - - 5,824.92 8,56,263.24

365 - 400 mm D , Back dimensions are 245 - 350 mm Ht - 350 . 420 mm W

Providing and supplying Stool / Chair for table . The stool has Wooden

Coloured base with foot support . It has plastic seat shell with Cushioned

176 NS-30-21 Seat wrapped in Leatherite / Fabric . Seat dimensions are 380 - 420 mm W x Each 12.00 - - 9,936.63 1,19,239.56

365 - 400 mm D , Back dimensions are 245 - 350 mm Ht - 350 . 420 mm W

Leatherette, 3D Adjustable Armrests, Centre Tilt Synchro

177 NS-30-22 Mechanism, 3 Pos Lock, Al. Die Cast Pedestal Each 10.00 - - 9,868.10 98,681.00

Chair Back : The back of the chair is upholstered with net. Back shall have

lumbar support.

Chair Seat : The Seat of the chair is upholstered with Fabric and cut foam on

12mm thick BWP Plywood.

The chair shall have deep cushioned in seat comfort to body contours for

proper alignment, posture

and all day comfort.

178 NS-30-23 Base : The chair is featured with Synchro Tilt mechanism and Nylon Base. Each 30.00 - - 11,101.62 3,33,048.60

The prong (base) is made of

Nylon. The telescopic bellow is 3 piece telescopic type and injection molded

in black polyurethane.

Gas lift : The chair is featured with Gas lift mechanism for Seat height

Arm rest : PU Height adjustable arm rest.

Castors : fitted with 5 nos. twin wheel nylon castors (castor wheel dia

Providing & Fixing of sofa . The inside frame is made of seasoned wood and

has antitermite treatment. The seat and back are made of foam and is

finished in leatherite upholestry. The Frame base has Webbing for

179 NS-30-24 Supporting the Cushions. The Complete Sofa Body has Polyurethane Foam in Each 9.00 - - 74,010.78 6,66,097.02

desired shape. The Sofa is supported on Metal Chrome Plated Legs.

Leatherite colour and type as per directions of Engineer in Charge.

Signature of Contractor Page 26 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

2350x2350x750 Primary Work Surface Made of 25mm thick MDF one side

pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top Soft closing access flap with in-build power box

are provided on work surface for wire management

Secondary Work Surface Made of 25mm thick MDF one side pre-laminate

board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on

Modesty Panel Made of 25mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.

Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2

grade and approved shade confirming to IS-12823:1990, Edge banded with

matching 2 mm thick PVC lipping.

Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2

180 NS-30-25 grade and approved shade Each 1.00 - - 4,79,699.50 4,79,699.50

confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC

Drawer fronts made of 25mm thick MDF one side pre-laminate board

IS-14587:1998 with 0.4mm PVC membrane pressed on to top

Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400

Panel Drawer Slides. Drawer extension is 325 MM.

Drawers have a soft closing & anti slam mechanism.

Handles are provided for ease of opening.

Pedestals are provided with lock for security.

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

of the desk. Modesty panel shall be made from 18 mm t pre- laminated

181 NS-30-26 Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all Each 2.00 - - 98,681.04 1,97,362.08

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key.

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

182 NS-30-27 of the desk. Modesty panel shall be made from 18 mm t pre- laminated 6.00 - - 98,681.04 5,92,086.24

Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key.

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

of the desk. Modesty panel shall be made from 18 mm t pre- laminated

183 NS-30-28 Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all 17.00 - - 98,681.04 16,77,577.68

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key.

Signature of Contractor Page 27 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

of the desk. Modesty panel shall be made from 18 mm t pre- laminated

184 NS-30-29 Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all Each 2.00 - - 74,010.78 1,48,021.56

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key.

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

of the desk. Modesty panel shall be made from 18 mm t pre- laminated

185 NS-30-30 Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all Each 1.00 - - 74,010.78 74,010.78

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key.

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

of the desk. Modesty panel shall be made from 18 mm t pre- laminated

186 NS-30-31 Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all Each 9.00 - - 74,010.78 6,66,097.02

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key.

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

of the desk. Modesty panel shall be made from 18 mm t pre- laminated

187 NS-30-32 Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all Each 5.00 - - 25,355.54 1,26,777.70

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key. ( ± 5% Varaition allowed)

Signature of Contractor Page 28 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

of the desk. Modesty panel shall be made from 18 mm t pre- laminated

188 NS-30-33 Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all Each 15.00 - - 18,502.70 2,77,540.50

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key. ( ± 5% Varaition allowed)

Table- Table size shall be 1600 Width x 750 Depth x 750 . The top shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be

made from 25 mm thick pre- laminated Particle board . All the edges are

sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the

top and bottom side .The side panels have 2 glide screws each for levelling

of the desk. Modesty panel shall be made from 18 mm t pre- laminated

189 NS-30-34 Particle board . All the edges are sealed with 0.8 mm thick PVC edge band all Each 10.00 - - 22,203.23 2,22,032.30

around. Freestanding Pedestal shall be made from 18 mm pre- laminated

Particle board with a combination of 2 mm and 0.8 mm PVC edge band on all

the exposed surfaces as per requirement . The drawers are provided with

suitable slides for smooth operation . All the pedestal drawers are centrally

locked with a single key. ( ± 5% Varaition allowed)

Alice Pro coffee table Walnut

TABLE LEGS METERIALS:Color :cherry,

TABLE TOP MATERIALS & SIZE : (tempered Glass/

Alice Pro coffee table Walnut

TABLE LEGS METERIALS:Color :cherry,

TABLE TOP MATERIALS & SIZE : (tempered Glass/

Supplying and placing in position of side table as per photograph Dimension

(L)600mm X (D)600mm X (H)450mm. The Side table made of solid wood

(steam beech) in pu matt polish.The plain glass placed the top of the table in

8mm thk. The turned wooden legs are sleek and sturdy providing the table

with its support. The wood work below the glass provides the glass with a

192 NS-30-37 focal point and some support. Add volumes of style to your living room with Each 32.00 - - 13,020.41 4,16,653.12

the side table. Material & subtype: Solid Wood -Beech Wood( spc:steam

beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular Legs/

Base:Solid Wood, Finish:Glossy, Style: Contemporary. (± 5% Varaition

Providing and fixing of (6'5"X1'6X4') . The table top shall be made of pre-

laminated particle board with 25 mm thick and 2 mm thick understructured

covered with PVC lipping , the rate include all necessary arrangments with

all toos and trackles complete for finished item of work, as directed by

193 NS-30-38 engineer incharge 25mm thk PLB table top with MS powder coated metal Each 25.00 - - 30,152.54 7,53,813.50

sole leg the rate include all necessary arrangments with all toos and trackles

complete for finished item of work, as directed by engineer incharge

Signature of Contractor Page 29 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Providing & Supplying Rack of size 900mm L x 610mm D x 1890mm Ht. The

top Panel is Made of CRCA Sheet and side panel is made up of 18mm thick

pre laminated particle board of interior grade with laminate on both sides of

approved make and shade. The working and non – working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt

194 NS-30-39 glue at high temperature. the back panel is made up of CRCA Metal Sheet Each 43.00 - - 30,152.54 12,96,559.22

Duly Powder Coated. Brackets holding the shelf are made up of 2mm thick

CRCA. Metal shelfs are made up of 0.8mm thick CRCA powder coated finish

as per the directions of Engineer in Charge. The above furniture should be as

per specification and sample approved by client.

Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved

shade conforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping.

Soft closing dual access flap provided for access to power supply and data

Understructure-The Under-structure consists of mixture of 25mm and 18mm

Pre-laminated twin board of E1-P2 grade and approved shade conforming to

IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

195 NS-30-40 Anodised aluminium alloy 63400 - WP profile is added at bottom edges for Each 8.00 - - 30,152.54 2,41,220.32

improving the aesthetics. The product has a knock-down construction.

Wire Management- A wire raiser made of 0.8mm CRCA MS IS:513. It is

epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and

cables. A Power box with 2 cutouts on either sides for standard 8 module

Anchor Roma is provided. Beside each cutout, an additional cutout with plate

is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).

Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved

shade conforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping.

Soft closing dual access flap provided for access to power supply and data

Understructure-The Under-structure consists of mixture of 25mm and 18mm

Pre-laminated twin board of E1-P2 grade and approved shade conforming to

IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

196 NS-30-41 Anodised aluminium alloy 63400 - WP profile is added at bottom edges for Each 3.00 - - 74,010.78 2,22,032.34

improving the aesthetics. The product has a knock-down construction.

Wire Management- A wire raiser made of 0.8mm CRCA MS IS:513. It is

epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and

cables. A Power box with 2 cutouts on either sides for standard 8 module

Anchor Roma is provided. Beside each cutout, an additional cutout with plate

is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).

Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved

shade conforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping.

Soft closing dual access flap provided for access to power supply and data

Understructure-The Under-structure consists of mixture of 25mm and 18mm

Pre-laminated twin board of E1-P2 grade and approved shade conforming to

IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

197 NS-30-42 Anodised aluminium alloy 63400 - WP profile is added at bottom edges for Each 3.00 - - 4,79,699.50 14,39,098.50

improving the aesthetics. The product has a knock-down construction.

Wire Management- A wire raiser made of 0.8mm CRCA MS IS:513. It is

epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and

cables. A Power box with 2 cutouts on either sides for standard 8 module

Anchor Roma is provided. Beside each cutout, an additional cutout with plate

is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).

Providing and placing in position of bed of Dimension:

1910mm(L) x 1382mm(D) x 1050mm(H). Complete structure ( headboard

frame, tail board frame and side frame) made out of 18mm thk Pre-Lam

MDF Board and bottom made out of 12mm thk Pre-Lam MDF Board

with Matching PVC lipping. ( ± 5% Varaition allowed).

Signature of Contractor Page 30 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Supply, Installation in postion of Work Surface: Made of 25mm +/- .5mm

thick pre-laminate board as per IS-12823 with 2mm PVC beading on all

199 NS-30-44 sides. Modesty Panel/Under Structure:Made of 18 mm thick pre-laminate Each 146.00 - - 13,020.42 19,00,981.32

board as per IS-12823 with 0.8mm PVC beading on all sides in complete as

per the direction of Engineer-in-charge

Alice Pro coffee table Walnut

TABLE LEGS METERIALS:Color :cherry,

TABLE TOP MATERIALS & SIZE : (tempered Glass/

Supply, Installation in postion of Work Surface: Made of 25mm +/- .5mm

thick pre-laminate board as per IS-12823 with 2mm PVC beading on all

201 NS-30-46 sides. Modesty Panel/Under Structure:Made of 18 mm thick pre-laminate Each 146.00 - - 6,167.57 9,00,465.22

board as per IS-12823 with 0.8mm PVC beading on all sides in complete as

per the direction of Engineer-in-charge

Providing and placing in position of double bed of Dimension:

1910mm(L) x 2082mm(D) x 1050mm(H). Complete structure ( headboard

202 NS-30-47 frame, tail board frame and side frame) made out of 18mm thk Pre-Lam Each 6.00 - - 40,431.82 2,42,590.92

MDF Board and bottom made out of 12mm thk Pre-Lam MDF Board

with Matching PVC lipping.

Providing and placing in position of Bed Side Table of Dimension:

450 (L) x 40mm(D) x 450mm(H). Complete structure (Top Bottom and

203 NS-30-48 side frame) made out of 18 mm thk Pre-Lam MDF Board and Back Each 12.00 - - 6,167.57 74,010.84

made out of 9mm thk Pre-Lam MDF Board with Matching PVC lipping.

1 seater Dimension(L) 960mm X (D)750mm X (H) 710mm. Supplying, and

placing in position of sofa as per Image.A supple Camel Brown premium

Leatherette upholstery adds class to the soft cushioned backrest and

seating. The rate of high quality Leatherette used shall be approx Rs. 350/

mt. Sitting proudly on sleek steel legs the sofa exudes a sense of comfort

that is perfect for any space. Material & subtype:Premium Leatherette,

Colour & Colour Family:Brown-Camel Brown, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern,

204 NS-30-49 Texture:Two Tone. steam beech solid wood have used for framing Each 5.00 - - 30,426.65 1,52,133.25

construction of sofa .The seat cushion is made of multi layered foam of

density 35-38 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic

webbing. The thread used is nylon bonded to provide lasting stitch strength .

The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200

gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The unit

should be complete as per image, and specification under the guidance of

Engineer in charge.

SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr

with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu,

upholstered with fabric or leatherette.

BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

upholstered with fabric or leatherette.

UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot

205 NS-30-50 pressed plywood [moisture resistance & termite proof as per IS:303] & Each 3.00 - - 47,969.95 1,43,909.85

pinewood of cross sections devoid of major knots & surface defects. 6 nos.

per seat & 3.8mm Dia zigzag spring assembly is mounted over

understructure for cushioning purpose.

LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS

202) tube & plate with plastic endcap.

Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height

Signature of Contractor Page 31 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr

with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu,

upholstered with fabric or leatherette.

BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr

with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

upholstered with fabric or leatherette.

UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot

206 NS-30-51 pressed plywood [moisture resistance & termite proof as per IS:303] & Each 2.00 - - 65,787.36 1,31,574.72

pinewood of cross sections devoid of major knots & surface defects. 6 nos.

per seat & 3.8mm Dia zigzag spring assembly is mounted over

understructure for cushioning purpose.

LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS

202) tube & plate with plastic endcap.

Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height

Supply, Installation in postion of Work Surface: Made of 25mm +/- .5mm

thick pre-laminate board as per IS-12823 with 2mm PVC beading on all

207 NS-30-52 sides. Modesty Panel/Under Structure:Made of 18 mm thick pre-laminate Each 2.00 - - 24,670.26 49,340.52

board as per IS-12823 with 0.8mm PVC beading on all sides in complete as

per the direction of Engineer-in-charge

Alice Pro coffee table Walnut

TABLE LEGS METERIALS:Color :cherry,

TABLE TOP MATERIALS & SIZE : (tempered Glass/

Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved

shade conforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping.

Soft closing dual access flap provided for access to power supply and data

Understructure-The Under-structure consists of mixture of 25mm and 18mm

Pre-laminated twin board of E1-P2 grade and approved shade conforming to

IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

209 NS-30-54 Anodised aluminium alloy 63400 - WP profile is added at bottom edges for Each 1.00 - - 3,70,053.90 3,70,053.90

improving the aesthetics. The product has a knock-down construction.

Wire Management- A wire raiser made of 0.8mm CRCA MS IS:513. It is

epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and

cables. A Power box with 2 cutouts on either sides for standard 8 module

Anchor Roma is provided. Beside each cutout, an additional cutout with plate

is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).

Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved

shade conforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping.

Soft closing dual access flap provided for access to power supply and data

Understructure-The Under-structure consists of mixture of 25mm and 18mm

Pre-laminated twin board of E1-P2 grade and approved shade conforming to

IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

210 NS-30-55 Anodised aluminium alloy 63400 - WP profile is added at bottom edges for Each 1.00 - - 67,843.22 67,843.22

improving the aesthetics. The product has a knock-down construction.

Wire Management- A wire raiser made of 0.8mm CRCA MS IS:513. It is

epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and

cables. A Power box with 2 cutouts on either sides for standard 8 module

Anchor Roma is provided. Beside each cutout, an additional cutout with plate

is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).

Providing & fixing in positionConferenceTableas per architectural drawing in

single unit,Top, sides, front to be made out of double layer of 19mm thk.

board + 3.5mm thk. Veneer on exposed surfaces. All other surfaces to be

211 NS-30-56 pasted with 3.5mm to 4mm veneer,necessary moulding and lipping of Each 1.00 - - 3,70,054.00 3,70,054.00

teakwood etc. of approved make , finishing with melamine polish (matt

finish) on all surfaces etc. complete in all respect as per specification and

direction of Engineer-in-charge

Signature of Contractor Page 32 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Workstations - Worktop shall be made of 25MM thick Pre-Laminated Board

conforming to IS: 12823. All the edges of work surface shall be provided

with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

The worktop shall be complete with provisions for screen mounting as well

as for wire management on the workstation. Provisions for fixing of the

212 NS-30-57 switches shall be on the wire tray/channel. Access flaps with soft closing Each 68.00 - - 30,152.54 20,50,372.72

technology shall be provided on the table tops to access the switch points on

the tray. Rectangular workstations of size 1200mm W x 600mm D with

Fabric Magnetic Extrusion Screen.

Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved

shade conforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping.

Soft closing dual access flap provided for access to power supply and data

Understructure-The Under-structure consists of mixture of 25mm and 18mm

Pre-laminated twin board of E1-P2 grade and approved shade conforming to

IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

213 NS-30-58 Anodised aluminium alloy 63400 - WP profile is added at bottom edges for Each 5.00 - - 95,939.90 4,79,699.50

improving the aesthetics. The product has a knock-down construction.

Wire Management- A wire raiser made of 0.8mm CRCA MS IS:513. It is

epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and

cables. A Power box with 2 cutouts on either sides for standard 8 module

Anchor Roma is provided. Beside each cutout, an additional cutout with plate

is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).

Dimensions W x D x H (cm)- 90 X90 X70.WORKTOP (PU): Worktop is made

of 25mm MDF OSR with pu matt finish on top side. Hardness on top surface

is 2H. The worktop is available in 5 shapes; viz.: Circle, Bite, Rectangle,

UNDER-STRUCTURE: The under-structure consists of an InnerTube Assembly

with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with

Round/Rectangle/Square Bottom Plate. The Inner & Outer Tube Assemblies

are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED

Steel Plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk

HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly

214 NS-30-59 is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes Each 9.00 - - 24,670.26 2,22,032.34

(ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per

IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer

Tube Assembly is made of 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE

WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel

Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS

Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-

60 microns). The product has a knock-down construction. It is assembled

using alloy steel hardware (blackened & coated with rust preventive oil).

Dimensions W x D x H (cm)- 90 X90 X70.WORKTOP (PU): Worktop is made

of 25mm MDF OSR with pu matt finish on top side. Hardness on top surface

is 2H. The worktop is available in 5 shapes; viz.: Circle, Bite, Rectangle,

UNDER-STRUCTURE: The under-structure consists of an InnerTube Assembly

with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with

Round/Rectangle/Square Bottom Plate. The Inner & Outer Tube Assemblies

are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED

Steel Plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk

HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly

215 NS-30-60 is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes Each 3.00 - - 24,671.00 74,013.00

(ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per

IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer

Tube Assembly is made of 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE

WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel

Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS

Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-

60 microns). The product has a knock-down construction. It is assembled

using alloy steel hardware (blackened & coated with rust preventive oil).

Signature of Contractor Page 33 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Dimensions W x D x H (cm)- 90 X90 X70.WORKTOP (PU): Worktop is made

of 25mm MDF OSR with pu matt finish on top side. Hardness on top surface

is 2H. The worktop is available in 5 shapes; viz.: Circle, Bite, Rectangle,

UNDER-STRUCTURE: The under-structure consists of an InnerTube Assembly

with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with

Round/Rectangle/Square Bottom Plate. The Inner & Outer Tube Assemblies

are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED

Steel Plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk

HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly

216 NS-30-61 is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes 10.00 - - 28,781.97 2,87,819.70

(ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per

IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer

Tube Assembly is made of 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE

WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel

Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS

Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-

60 microns). The product has a knock-down construction. It is assembled

using alloy steel hardware (blackened & coated with rust preventive oil).

Supplying, and placing in position of full height storage as per

photograph/drawing. storage unit having Openable shutters with shelf in it.

The modular storage unit top shall be made from 18 mm thick pre-laminated

particle board and rest of the sides as well as shelves and shutter to be

217 NS-30-62 made up of 18 mm thick pre-laminated particle board while back to be made Sqm 130.00 - - 24,464.65 31,80,404.50

of 8 mm thick pre-laminated particle board. All edges to be provided with 2

mm thick PVC lipping. Each unit to have openable shutters with locking

22 Modular Kitchen - - -

Hinged Unit below Sink:- Height : (700 mm); Depth (560 mm), Width (800

mm), Providing & installing Kitchen Cabinets

in approved make Boiled Water Resistance PRELAMINATED (BWR) 18mm

thickness body panels (without back panel), lipping of 1.3mm thickness with

openable shutters in Boiled Water Resistance PRELAMINATED MARINE PLY

218 NS-31-1 (BWR) 18mm thickness, lipping of 1.3mm thickness. Each shutter shall be Sqm 9.00 - - 29,494.67 2,65,452.03

fixed to the carcass using two numbers of soft closing hinges (approved

make) as per requirement fixed with SS screws, nails etc complete.

Including providing & fixing of waste bin holder.

Plain CornerSelf Unit:- Height : (700 mm), Depth = ( 560mm), Width (1000

mm), Providing & installing Kitchen Cabinets in approved make Boiled Water

Resistance PRELAMINATED (BWR) 18mm thick body panels,6 mm thick back

panel, 12mm thick shelves (minimum 1 horizontal partition) lipping of

1.3mm thickness with one openable

shutter of 450mm width in Boiled Water Resistance PRELAMINATED (BWR)

219 NS-31-2 18mm thickness 16mm thick ply and 1 mm laminate on each side, lipping of Sqm 11.00 - - 29,494.67 3,24,441.37

1.3mm thickness. Each shutter shall be fixed to the carcass using two

numbers of soft closing hinges as per requirement (approved make) fixed

with SS screws , nails etc complete. All shelves should be supported on

approved quality SS pins and shall be adjustable for different heights as per

7) 3 Drawer Thali Unit :- Height : (700 mm), Depth = (560 mm), Width

(600 mm), Providing & installing Cabinets in approved make Boiled Water

Resistance PRELAMINATED (BWR) 18mm thickness body panels, 6 mm thick

back panel lipping of 1.3mm thickness with Drawer Facia in Boiled Water

Resistance PRELAMINATED (BWR) 18mm thickness, lipping of 1.3mm

220 NS-31-3 thickness, including a set of 2 SS (304 grade) wire baskets of 100mm height Sqm 8.00 - - 47,191.47 3,77,531.76

and one of 150 mm height with required SS screw for fixing above

component, as per requirement. High precision approved make double

extension ball slides in drawers & baskets.

Signature of Contractor Page 34 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

7) 2 Drawer Grocery Unit :- Height : (700 mm), Depth = (560 mm), Width

(450 mm), Providing & installing Cabinets in Boiled Water Resistance

PRELAMINATED (BWR) 18mm thickness body panels,6 mm thick back panel

lipping of 1.3mm thickness with Drawer Facia in Boiled Water Resistance

PRELAMINATED (BWR) 18mm thickness, lipping of 1.3mm thickness.

221 NS-31-4 approved make Make 304 SS grade i/c a set of 2 plain SS wire baskets of Sqm 5.00 - - 47,191.47 2,35,957.35

100 and 150 mm height with required SS screw for fixing above component,

as per requirement.High precision approved make make double extension

ball slides in drawers & baskets.

7) 2 Drawer Utensil Unit :- Height : (700 mm), Depth = (560 mm), Width

(600 mm), Providing & installing Cabinets in Boiled Water Resistance

PRELAMINATED (BWR) 18mm thickness body panels,6 mm thick back panel

lipping of 1.3mm thickness with Drawer Facia in Boiled Water Resistance

PRELAMINATED (BWR) 18mm thickness, lipping of 1.3mm thickness.

222 NS-31-5 approved make Make 304 SS grade i/c a set of 2 plain SS wire baskets of Sqm 7.00 - - 47,191.47 3,30,340.29

150 and 150 mm height with required SS screw for fixing above component,

as per requirement.High precision approved make make double extension

ball slides in drawers & baskets.

All shutters or Drawer Facia of all units are provided with a minimum 128

mm pitch Handle (approved quality). The

carcase of all floor units will be supported by 100mm height vertical

ajustable legs (approved make) which will be covered with PVC skirting

(approved make) in brushed aluminium finish attached by hardware of

skirting . All exposed edges made with 2mm PVC (approved make) edge

banding. The marine ply is chemically treated for termite & borer resistant

Note: 1. Above dimensions of units are indicative, work shall be carried out

as per actual dimensions at site, only front area (i.e. elevation area,

including skirting) will be measured for payment, corner unit will be

measured for full length.

2. At top, supporting frame/strips of BWR grade ply to be provided and

included in this item. Counter top

finish i.e. Granite fixed with a marine grade ply will be paid saperately.

Supply and fixing of modular kitchen cabinet Top unit:Supply and fixing of

modular kitchen cabinet overhead wall units in Boiled Water Resistance

PRELAMINATED (BWR) 18mm thick body panels,6 mm thick back panel,

12mm thick shelves (minimum 1 horizontal partition) lipping of 1.3mm

thickness with openable shutters in Boiled Water Resistance PRELAMINATED

(BWR) 18mm thickness 16mm thick ply and 1 mm laminate on each side,

lipping of 1.3mm thickness. Each shutter shall be fixed to the carcass using

two numbers of soft closing hinges (approved make) as per requirement

224 NS-31-7 (approved make) fixed with SS screws, nails etc complete and these shutters Sqm - - - - -

are provided with an approved quality of minimum 128 mm pitch Handle. All

shelves should be supported on approved quality SS pins and shall be

adjustable for different heights as per requirements. All exposed edges made

with 2mm PVC (approved make) edge banding. Wall units to be fixed on wall

using appropirate number of screws and rawl plugs / fastners to give

stability. The marine ply is chemically treated for termite & borer resistant.

Work comprising of following units (refer tender drawing):

Top Plain Shelf Unit:- Height : (600 mm), Depth = ( 310mm), Width ( 900

Top Plain Shelf Unit:- Height : (600 mm), Depth = ( 310mm), Width ( 800

Top Plain Shelf Unit:- Height : (600 mm), Depth = ( 310mm), Width ( 600

Top GTPTPlain Shelf Unit:- Height : (600 mm), Depth = ( 310mm), Width (

Supplying, and placing in position of full height storage as per

photograph/drawing. storage unit having Openable shutters with shelf in it.

The modular storage unit top shall be made from 18 mm thick pre-laminated

particle board and rest of the sides as well as shelves and shutter to be

229 NS-31-12 made up of 18 mm thick pre-laminated particle board while back to be made Sqm 32.00 - - 20,646.27 6,60,680.64

of 8 mm thick pre-laminated particle board. All edges to be provided with 2

mm thick PVC lipping. Each unit to have openable shutters with locking

Signature of Contractor Page 35 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

SECTION-I-STRUCTURED CABLING SYSTEM PASSIVE(LAN &

Supply, Installation, Testing & Commissioning of armoured 6 core

Singlemode OS2 (9/125 Micro), Corrugated ECCS Armor, HDPE (UV)

230 NS-1 Sheathing, Theoxtropic gel filled OFC cable with 2 Nos steel music wire Mtr 725.00 - - 170.00 1,23,250.00

embedded in side sheathing as stregth member for switch connectivity.

Cable should be ROHS compliant and as per IEC60749-1

Supply, Installation, Testing & Commissioning of 6F SM loaded LIU with LC

adaptor plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable

entry exist point with rubber gurment along with the LIU, Powder Coaded

231 NS-2 1.2mm steel sheet metal, 1U etc complete as required. LIU should be in Nos. 3.00 - - 15,750.00 47,250.00

accordance with YD/T 778-2006 Optical Distribution Frame & YD/T 1272.1-

2003 Optical Fiber Connector Part 1: Type LC

Supply, Installation, Testing & Commissioning of 24F SM loaded LIU with LC

adaptor plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable

entry exist point with rubber gurment along with the LIU, Powder Coaded

232 NS-3 1.2mm steel sheet metal, 1U etc complete as required. LIU should be in Nos. 1.00 - - 28,950.00 28,950.00

accordance with YD/T 778-2006 Optical Distribution Frame & YD/T 1272.1-

2003 Optical Fiber Connector Part 1: Type LC

Supply, Installation, Testing & Commissioning of LC-LC singlemode OS2

(9/125) duplex, LSZH fiber patch cord(3 meter) for LIU to switch

connectivity. Patch Cord should have aramid yarn as strenght member with

1000 time mating cycle.

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23

AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS

234 NS-5 Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation Mtr 28,215.00 - - 67.00 18,90,405.00

of individual conductor and over all Dia of 5.8mm for Connectivity of Hub

room to End Point.

Supply, Installation, Testing & Commissioning of CAT 6 UTP Universal (both

tool & toolless) information outlet (I/O) in accordance with ANSI TIA 568

Compliant. The I/O should have minimum 750 mating cycle and 200

insertion cycle and UL approved,for Camera at user end.

Supply, Installation, Testing & Commissioning of fully loaded 24 port CAT 6

UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable

support bar, clear label marks and earthing plug for CAT6 cable termination

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch

Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch

cord 1 Mtr for rack side switch to jack panel connectivity.

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch

Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch

238 NS-9 cord 2 Mtr for rack side switch to end user connectivity. Nos. 607.00 - - 490.00 2,97,430.00

Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate,

British Style with Shutter, 2 Plate system clear finish with transparent

labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like

ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 &

ISO/IEC 60603-7 white for I/O fixing at user side.

Supply, Installation, Testing & Commissioning of 42U (600W/1000D) floor

mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of

Supply, Installation, Testing & Commissioning of 15U wall mount rack with

241 NS-12 fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Nos. 2.00 - - 17,500.00 35,000.00

SECTION -II- STRUCTURED CABLING SYSTEM PASSIVE(WIFI) - - - -

Supply, Installation, Testing & Commissioning of armoured 6 core

Singlemode OS2 (9/125 Micro), Corrugated ECCS Armor, HDPE (UV)

242 NS-13 Sheathing, Theoxtropic gel filled OFC cable with 2 Nos steel music wire Mtr 750.00 - - 170.00 1,27,500.00

embedded in side sheathing as stregth member for switch connectivity.

Cable should be ROHS compliant and as per IEC60749-1

Signature of Contractor Page 36 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Supply, Installation, Testing & Commissioning of 6F SM loaded LIU with LC

adaptor plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable

entry exist point with rubber gurment along with the LIU, Powder Coaded

243 NS-14 1.2mm steel sheet metal, 1U etc complete as required. LIU should be in Nos. 4.00 - - 15,750.00 63,000.00

accordance with YD/T 778-2006 Optical Distribution Frame & YD/T 1272.1-

2003 Optical Fiber Connector Part 1: Type LC

Supply, Installation, Testing & Commissioning of 24F SM loaded LIU with LC

adaptor plates, pigtel cables, Spilce tray, cable holder and 4 nos of cable

entry exist point with rubber gurment along with the LIU, Powder Coaded

244 NS-15 1.2mm steel sheet metal, 1U etc complete as required. LIU should be in Nos. 1.00 - - 28,950.00 28,950.00

accordance with YD/T 778-2006 Optical Distribution Frame & YD/T 1272.1-

2003 Optical Fiber Connector Part 1: Type LC

Supply, Installation, Testing & Commissioning of LC-LC singlemode OS2

(9/125) duplex, LSZH fiber patch cord(3 meter) for LIU to switch

245 NS-16 connectivity. Patch Cord should have aramid yarn as strenght member with Nos. 48.00 - - 2,575.00 1,23,600.00

1000 time mating cycle.

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23

AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS

246 NS-17 Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation Mtr 2,475.00 - - 67.00 1,65,825.00

of individual conductor and over all Dia of 5.8mm for Connectivity of Hub

room to End Point.

Supply, Installation, Testing & Commissioning of CAT 6 UTP Universal (both

tool & toolless) information outlet (I/O) in accordance with ANSI TIA 568

Compliant. The I/O should have minimum 750 mating cycle and 200

insertion cycle and UL approved,for Camera at user end.

Supply, Installation, Testing & Commissioning of fully loaded 24 port CAT 6

UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable

248 NS-19 support bar, clear label marks and earthing plug for CAT6 cable termination Nos. 3.00 - - 13,950.00 41,850.00

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch

Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch

cord 1 Mtr for rack side switch to jack panel connectivity.

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch

Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch

cord 2 Mtr for rack side switch to end user connectivity.

Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate,

British Style with Shutter, 2 Plate system clear finish with transparent

251 NS-22 labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like Nos. 55.00 - - 130.00 7,150.00

ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 &

ISO/IEC 60603-7 white for I/O fixing at user side.

Supply, Installation, Testing & Commissioning of 27 U (600W/1000D) floor

252 NS-23 mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of Nos. 1.00 - - 42,500.00 42,500.00

Supply, Installation, Testing & Commissioning of 15U wall mount rack with

253 NS-24 fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Nos. 1.00 - - 17,500.00 17,500.00

Supply, Installation, Testing & Commissioning of 6U wall mount rack with

254 NS-25 fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Nos. 2.00 - - 9,500.00 19,000.00

SECTION - III- LOCAL AREA NETWORK ( LAN ) - - - -

Supply, Installation, Testing & Commissioning of core switch with 24x10G

SFP+,4x 40G/100G(QSFP28) Port, 800 Gbps or higher Backplane capacity

and minimum 600 Mpps of forwarding rate Should Non Blocking architecture

, 32K MAC address. Should have Static Routing ,RIP,VRRP, OSPF & BGP from

255 NS-26 day 1,Should support ISSU from day 1 ,Should support stacking with min 12 Nos. 1.00 - - 6,50,000.00 6,50,000.00

members in a stack, Neighbor discovery, system logging, Telnet, SSH,

SNMP, Network Time Protocol (NTP),IPv6 features from day 1 , MTBF Min

198000 Hr, RPS .

Signature of Contractor Page 37 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Supply, Installation, Testing & Commissioning of 24 Port POE+ Access

Switches with switching capaticy of 128 Gbps, forwarding performance 92

Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE

budget of 370W, with 4 x 10G SFP+ uplink ports. Should Non Blocking

architecture , 16K MAC address. Should have Static Routing ,RIP,VRRP, OSPF

256 NS-27 from day 1,Should support ISSU from day 1 ,Should support stacking with Nos. 3.00 - - 2,75,000.00 8,25,000.00

min 12 members in a stack, Neighbor discovery, system logging, Telnet,

SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF

Supply, Installation, Testing & Commissioning of fiber Modules 10G BASE

Supply, Installation, Testing & Commissioning of ITAM with Capture

specifications, warranties, Serial Numbers, MAC Addresses, IP info, what

other H/W relates/connects to this H/W, item status, event logs,

258 NS-29 assignees,Specifications, License information,Print label stickers for tag all Nos. 1.00 - - 12,90,850.00 12,90,850.00

your assets, with or without barcode, from phones and laptops to cooling

units and UPS. Easily define new label paper layouts through the GUI

Supply, Installation, Testing & Commissioning of 2x2 Access Point Ceilling

Mount having 10/100/1000M Base-T WAN Port (IEEE at/af standard PoE

supported), 1x1G LAN Port .For 2.4G 573Mbps, 2*2 MIMO. For 5G

1200Mbps, 2*2 MIMO. 200 square meter coverage (without any

obstacle).Built-in omnidirectional internal antennas. Antenna gain: For 2.4G:

3dBi and for 5G: 3dBi.Maximum number of users per band should be

minimum 128. power consumption:18W.Encryption: AES, WPA3\802.11i:

259 NS-30 Supported, Authentication: MAC Address/PSK, Client isolation: Both Layer-2 Nos. 55.00 - - 48,500.00 26,67,500.00

wireless client isolation and SSID isolation,Forwarding security: Packet filter,

MAC address filter, and broadcast storm suppression,SSID-VLAN binding:

Supported,Management frame protection (802.11w): Supported.Should be

CE, FCC, CCC, ROHS certified

SUB-HEAD -IV- IP CCTV SYSTEM - - - -

Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23

AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS

260 NS-31 Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation Mtr 4,635.00 - - 67.00 3,10,545.00

of individual conductor and over all Dia of 5.8mm for Connectivity of Hub

room to End Point.

Supply, Installation, Testing & Commissioning of CAT 6 UTP Universal (both

tool & toolless) information outlet (I/O) in accordance with ANSI TIA 568

Compliant. The I/O should have minimum 750 mating cycle and 200

insertion cycle and UL approved,for Camera at user end.

Supply, Installation, Testing & Commissioning of fully loaded 24 port CAT 6

UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable

support bar, clear label marks and earthing plug for CAT6 cable termination

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch

Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch

263 NS-34 cord 1 Mtr for rack side switch to jack panel connectivity. Nos. 102.00 - - 450.00 45,900.00

Supply, Installation, Testing & Commissioning of CAT 6 UTP, LSZH Patch

Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch

cord 2 Mtr for rack side switch to end user connectivity.

Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate,

British Style with Shutter, 2 Plate system clear finish with transparent

labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like

ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 &

ISO/IEC 60603-7 white for I/O fixing at user side.

Supply, Installation, Testing & Commissioning of 4 or 6 Meter G.I Pole with

266 NS-37 foundation complete as required. Nos. 2.00 - - 24,500.00 49,000.00

Signature of Contractor Page 38 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Supply, installation, testing and commissioning of 5 MP Dome camera

,ONVIF profile S,G & T. UL , CE , FCC,BIS Certified ,OEM defined MAC

address.1/2.7” Progressive Scan CMOS ,3.6 mm fixed lens , Quad stream

Each stram support H.265 compression simultaneously ,min illumination :

Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter speed : 1 /

5s ~ 1 / 100,000 s , WDR , Compression : H.265/H.265+/H.264/H.264+ .SD

card support upto 256GB , frame rate : Main stream should support 25/30

fps@5MP, Built in Mic, Edge analytics : Customer Flow staistics, Heat Map,

267 NS-38 Human & Vehicle Detection, Pedestrian Intrusion Detection & Line cross Nos. 72.00 - - 21,500.00 15,48,000.00

Detection. Queue length detection Regional population statistics, SOD-

Stationaary Object Detection, Motion Detection, Tempring Detection, Rare

Sound Detection, License Plate Detection. Defog. Protocols:- TCP/IP, HTTP,

DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, P2P,

UDP,PPPoE, Bonjour. In built IR LED , IR Distance upto 30 meters , IP 66 ,

Supply, installation, testing and commissioning of 5 MP Bullet camera

,ONVIF profile S,G & T. UL , CE , FCC,BIS Certified,OEM defined MAC

address,1/2.7” Progressive Scan CMOS ,3.6 mm fixed lens , Quad stream

Each stram support H.265 compression simultaneously ,min illumination :

Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter speed : 1 /

5s ~ 1 / 100,000 s , WDR , Compression : H.265/H.265+/H.264/H.264+ .SD

card support upto 256GB , frame rate : Main stream should support 25/30

fps@5MP, Built in Mic, Edge analytics : Customer Flow staistics, Heat Map,

Human & Vehicle Detection, Pedestrian Intrusion Detection & Line cross

Detection. Queue length detection Regional population statistics, SOD-

Stationaary Object Detection, Motion Detection, Tempring Detection, Rare

Sound Detection, License Plate Detection. Defog. Protocols:- TCP/IP, HTTP,

DHCP, DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, P2P,

UDP,PPPoE, Bonjour. In built IR LED , IR Distance upto 30 meters , IP 66 ,

Supply, installation, testing & commissioning of 128 channel NVR

upgradable upto 256 channel, Live and recording resolution up to 12MP,

Recording bandwidth Incoming 1024 Mbps and outgoing 800 Mbps, RAM 32

Gb*2, Support RAID 0/1/5/6/10, Support Face detection and Recognition

269 NS-40 with Face Capture/Register quantity 1000000/ 10000, 512 User list, display Nos. 1.00 - - 5,95,000.00 5,95,000.00

out 3 HDMI and 1 VGA port, HDD: 16 SATA HDD Slots, Each SATA support

up to 18TB, NVR support Power Supply, installation, testing & commissioning

redundancy, Operating temperature -10°C~+50°C.

Supply, Installation, Testing & Commissioning of 16TB Surviellance Hard

Signature of Contractor Page 39 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Supply, Installation, Testing and Commissioning of Full HD 55" LED

Professional Display Panel.

Supply, Installation, Testing & Commissioning of L2+ managed industrial

PoE switch with 24*10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot

ports, Port 1-24 can support IEEE 802.3af/at PoE standard, switching

capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE

272 NS-43 output power is 400W(at-600W), with 32K MAC address. Should have Static Nos. 7.00 - - 2,75,000.00 19,25,000.00

Routing , system logging, Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time

Protocol (NTP), FTP, TFTP, Xmodem.

Supply, Installation, Testing & Commissioning of L2+ managed industrial

PoE switch with 10*10/100/1000M RJ45 ports and 4*100/1000M uplink SFP

slot ports, Port 1-8 can support IEEE802.3af/at PoE. Support DC dual power

supply input and DIN rail mounting. Switching capaticy of 256 Gbps,

forwarding performance 20.83 Mpps, having 8 x 10/100/1000BASE-T PoE-

273 NS-44 plus(RJ45) with maximum PoE output power is 120W(at-240W). , with Nos. 1.00 - - 85,000.00 85,000.00

2*10/100/1000Base-T uplink RJ45 ports 4*100/1000Base-X uplink SFP slot

ports., 8K MAC address. Should have Static Routing , system logging,

Telnet, SSH, SNMP, Network Time Protocol (NTP), and IPv6 features from

Supply, Installation, Testing & Commissioning of fiber Modules 1000BASE

Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R)

Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB

(1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis:

Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics

275 NS-46 Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Nos. 1.00 - - 90,000.00 90,000.00

Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s

Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest.

SUB-HEAD V- BOOM BARRIER SYSTEM - - - -

Supply, installation, testing and commissioning of automatic Nos.

electromechanical boom barrier suitable road width 5-7 mtrs for intensive

applications, high speed with 4-6 second opening/closing time with

Aluminium housing & aluminium boom with fork rest, IP 67 Protection etc.

(for Gate Entry/Exit)

Supply , Installation , Testing and Commissioning of a set of Entry/Exit

277 NS-48 push buttons for manual open and closing of barriers etc. complete as Nos. 2.00 - - 4,500.00 9,000.00

required.(for Gate Entry/Exit).

Supply , Installation , Testing and Commissioning of Photocell based safety

278 NS-49 device to avoid closing of the barrier when a Vehicle is crossing the barrier. Nos. 2.00 - - 6,500.00 13,000.00

( Anti Fall Protection ).

Supply installation, testing and commissioning of Remote & Receiver.

SUB-HEAD -VI- FIRE DETECTION SYSTEM - - -

Supply, installation, testing & commissioning analog addressable

280 17.2.4 photothermal detector complete with mounting base complete as required - Nos. 100.00 - 3,297.77 3,29,777.00

Below False Ceiling

Supply, installation, testing & commissioning addressable thermal detector

280.1 17.2.9 with rate of rise cum fixed tempreature thermistor complete with base as Nos. 15.00 - 3,143.66 47,154.90

Supplying, installation, testing & commissioning of addressable manual call

280.2 17.2.14 point complete as required. Nos. 27.00 - 3,881.79 1,04,808.33

Supplying, installation, testing & commissioning of addressable fire control

module complete as required

Signature of Contractor Page 40 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

Supplying, installation, testing & commissioning of fault isolator complete

Supplying, installation, testing & commissioning of addressable horn cum

280.5 17.2.15 strobe complete as required. Nos. 27.00 - 4,048.64 1,09,313.28

FIRE ALARM CONTROL PANEL - - - -

Supplying, installation, testing and commissioning of micro processor based

intelligent addressable main fire alarm panel, central processing unit with

the following loop

modules and capable of supporting not less than 240 devices (including

detectors) and minimum 120 detectors per loop and loop length up to 2 km,

network communication card,

minimum 320 character graphics/ LCD display with touch screen or other

keypad and minimum 4000 events history log in the non volatile memory

281 17.2.1 (EPROM), power Supply, installation, testing & commissioning unit (230 ± - - - -

5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries

with automatic charger. The

panel shall have facility to connect printer to printout log and facility to have

seamless integration with analog/digital voice evacuation system (which is

part of the schedule of work under SH: PA System) and shall be complete

with all accessories . The panel shall be compatible for IBMS system with

open protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of fire fighter phone jack

Supplying, installation, testing & commissioning of fire fighter telephone

283 17.2.17 handset complete as required Nos. 6.00 - 6,636.11 39,816.66

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V

rated with annealed copper conductor having XLPE insulation, steel wire

284 17.5.2 armouring & FRLS outer sheath complete as required. RM 1,465.00 - 163.39 2,39,366.35

SUB-HEAD -VII- PA SYSTEM - - - -

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker

complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W metal box

ceiling/wall speaker complete as required

Supplying, installation, testing & commissioning of 6 zone, voice alarm

controller with USB, MP3 player (including 6 zone button paging station)

285.3 17.3.1 with seamless integration facility with main fire alarm panel for voice Nos. 1.00 - 1,46,463.81 1,46,463.81

evacuation complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75

285.4 17.3.7 Watt, 25V rms operating at 240 Volt AC Supply complete as required Nos. 4.00 - 1,68,921.38 6,75,685.52

Supplying, installation, testing & commissioning of Voice command keypad 6

zone, with microphone assembly complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V

rated with annealed copper conductor having XLPE insulation, steel wire

armouring & FRLS outer sheath complete as required.

Supply, Installation, Testing & Commissioning of 27 U (600W/1000D) floor

286 NS-51 mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of Nos. 1.00 - - 42,500.00 - 42,500.00

Auditorium Ground Floor, Admin block( Stage 15x6, Stage to Last

Signature of Contractor Page 41 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

SITC of Projector having Resolution: Supports 4K@60Hz, Brightness: 12,000

lumens (ANSI),HDMI 2.0 and HDCP 2.2: Fully compliant with these

standards, PoE: Power over Ethernet Plus for easy installation, KVM:

Keyboard Video and Mouse Connectivity Support, Video Input/Output: 1 x

HDMI input and 1 x RJ-45 (1G) / 1 x 1G SFP Port output, Audio Input: 1 x

Analog Stereo (Balanced or Unbalanced), Digital Audio: Over Ethernet via

RJ45, Latency: Not more than 17 ms at 60 fps, Control Port: 1 x RS-232, 1 x

IR, Certification: BIS, CE, UL, FCC certified. With Lens.

Low Noise Motorized Projector ceiling Lift (50Kg load bearing capacity, Travel

distance suitable for Lecture Theatre false ceiling position)

SITC of projector screen, dimension should be at least 340inch Diagonal for

289 340" Diagonal visibility of content to the furthest viewer, Motorised, control with controlling Nos 1.00 - - 2,08,650.00 2,08,650.00

SITC of 43” Diagonal 4k/UHD LED displays of shall be provided below the

43” Diagonal Dias for Video and Content to be viewed by the stage Participants. These two

4k/UHD LED displays should be able to showcase 02 different contents simultaneously.

290 displays These displays should be mounted on a removable floor mounting stand so Nos 2.00 - - 48,150.00 96,300.00

(Stage that the displays can be removed when not in use. The connectivity to these

Monitors) displays shall be provided on a wall plate connectivity with twisted pair

connectivity at the backend.

291 SITC 43" Display floor mount. Nos 2.00 - - 12,840.00 25,680.00

SITC of 55” Diagonal 4k/UHD LED displays of shall be mounted outside the

Auditorium at the entrance, showcasing the name of the ongoing event and

necessary information. If required can also showcase Live Video feed from

the Auditorium.

SITC of 01 no’s of Multimedia podium to be provided for Dias which will help

Multimedia to connect multiformat video signal inputs to the Control room and the

podium podium will also have Goosneck microphone which can connect with audio

system in wooden only.

SITC of network switch having Ports: 16, 10/100/1000 Mbps Ethernet ports,

2 SFP ports, Power over Ethernet (PoE): Supports IEEE 802.3af/at with a

Network total power budget of 150W, PoE Ports: Ports 1-8 support PoE devices up to

switch 250 meters distance, Flow Control: 802.3x flow control on each port

minimizes dropped packets, Lightning Protection: 6kV protection, Operating

Temperature: 0°C to 40°C (32°F to 104°F).

SITC of PTZ Camera having Resolution: Supports 4K@60Hz, Optical Zoom:

20x optical zoom, Video Outputs: HDMI, SDI, USB, and IP, Control Ports: RS-

ceiling / wall 232, RS-485, and IP control support, Audio Input/Output: 3.5mm stereo

mounted Full audio in/out, Mounting Options: Supports ceiling mount, wall mount, and

HD tripod mount, Field of View: 60.7° angle of view, Low Light Performance:

PTZ camera High performance in low light conditions, Compression: Supports H.265,

H.264, and MJPEG compression with all mounting arrangements. proposed

SITC of Extends HDMI signals to one local and two remote displays up to

100 m over a single Cat 5e/6/6a, Up to 4K @ 35 m (Cat 5e/6) / 40 m (Cat

6a / ATEN 2L-2910 Cat 6); 1080p @ 60 m (Cat 5e/6) / 70 m (Cat 6a / ATEN

Gbps (3.4 Gbps per Lane), RS-232 control, Connector: 1 x Terminal Block, 3

pole, Baud Rate: 19200, Data Bits:8, Stop Bits:1, no parity and flow control,

Power 1 x DC Jack (Black) with locking or 1 x RJ-45 (Power over HDBaseT,

PoH), 1 x DC Jack (Black) with locking, Operating Temperature 0 - 50°C.

Signature of Contractor Page 42 of 100 NBCC

Digitally signed by VARUN

DSR-2022 Rate (E&M)

(incl. Correction factor

DSR/NS (CIVIL) (incl.

Sl.No Description Unit Qty 1.0633, 0.973 & CI Non DSR Rate DSR Amount Civil DSR Amount E/M Non DSR Amount

Ref.No Correction factor

SITC of Camera controlling system which have, Compatibility: Works with

most PTZ cameras operating serial or IP protocol, Control Connections:

Supports RS-232, RS-422/RS-485, Ethernet / RJ-45 (PoE), and 12V DC

power connection, User Interface: Features an expanded LCD screen and a

wide range of knobs for fine-tuning, Control Options: Allows control of white

balance, red and blue gain, shutter speed, and more, Web Interface:

Provides a web user interface for easy setup and configuration, Customizable

Joystick Button: Located at the top of the joystick controller for quick access