PERIODICAL SERVICES ALONGWITH REPAIR MAINT TO PLUMBING / SANITARY FITTINGS, JOINERY AND OTHER CERTAIN B/R WORKS FOR MD ACCN / ADM BLDG AT DIBER HALDWANI

Amount

Contract Details

M&L for applying a coat of white wash on old white washed surfaces of wall including preparation all as specified and directed.

M&L for applying a coat of white wash on old white washed surfaces of ceiling including preparation all as specified and directed.

M&L for preparation of old plaster surfaces on walls and applying a coat of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old plaster surfaces on ceiling and applying a coat of distemper oil emulsion complete all as specified and directed.

M&L Preparation of old plastered surfaces of walls after complete removal of existing treatment and applying one coat of cement base paint over a coat of primer complete all as specified.

M&L for applying a coat of synthetic enamel paint on old painted wooden surfaces of any description, over 10cm width or girth including preparation complete all as specified.

M&L for applying a coat of synthetic enamel paint on old painted steel surfaces of any description, over 10cm width or girth including preparation complete all as specified.

Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed.

Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed.

S&F 15 mm dia (normal bore) galvanised iron water tubing 'medium grade' with and including all GI fitting such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F 20 mm dia (normal bore) galvanised iron water tubing 'medium grade' with and including all GI fitting such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

M & L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) for 15 mm dia pipes with and including all new fittings complete all as specified and directed.

M & L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) for 20 mm dia pipes with and including all new fittings complete all as specified and directed.

S&F in repair 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed fixed complete all as specified and directed

S&F in repair 15 mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed fixed complete all as specified and directed

S&F in repair 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

S&F in repair 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

S&F in repair PVC water tank cover for PVC water tank capacity not exc 1000 ltr including complete fittings all as directed

Disconnecting existing over head water storage tanks capacity exceeding 250 Ltrs but not exceeding 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning internal surface of tank with the help of bleaching powder etc and removing all scale and dirt, etc, from tanks and from mouth of circulating pipes, etc and hoisting if required reconnecting and refixing in position complete including embosing date of completion of cleaning by stencil with paint all as specified and as directed.

Disconnecting existing over head water storage tanks capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning internal surface of tank with the help of bleaching powder etc and removing all scale and dirt, etc, from tanks and from mouth of circulating pipes, etc and hoisting if required reconnecting and refixing in position complete including embosing date of completion of cleaning by stencil with paint all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thicknes below or above ground level complete all as specified and as diredcted

Taking down cement plaster on brick walls including. raking out joints, hacking for key, scrubbing down with water etc all asspecified and as directed.

Taking down chowkats or frames exc. 1.5 but n.exc 4sqm each with shutters (w/o taking off shutters from the frame) all as specified and as directed.

All as per item no 25 but n.exc 1.50 Sqm each all as specified and as directed.

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each all as specified and as directed.

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all asspecified and as directed.

M&L for reinforced cement concrete type B1 1:2:4 (20mm graded stone) aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as diredted

S&F Mild steel bars 6 to 8 mm dia TMT bar cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

S&F Mild steel bars 10 mm dia TMT bar cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

S&F non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick rendering in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick on vertical surface, skirting/dados etc over screed bed or bedding layer of mortor 10 mm thick in cement mortor 1:4, complete all as specified and as directed.

M&L10mm thick cement plaster on fair faces of brick work or concrete surface on wall even and smooth without using extra cement in CM 1:6 finished fair and even complete all as specified and directed.

M&L 15 mm thick cement plaster other than fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar (1:3) on ceiling concrete surfaces finished even and smooth without using extra cement, complete all as specified.

M&L Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening, complete all as specified.

M&L Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

M&L Preparation of new plastered surfaces of wall and applying two coat of cement base paint (snowcem) white or tinted complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x160mm complete all as specified ans as diredted.

S&F in repair 15 mm bore dia Stop cock fancy type Chromium plated screwed down, high pressure, with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repair 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between falnges complete all as specified and directed.

S&F in repairs PVC syphonic action type low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, 32 mm PVC flush pipe and necessary fixing arrangements and connecting to water pipe, complete all as specified .

S&F in repairs Vitreous China squatting pan “Orissa” pattern size 580X440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) fixed in repairs, including connecting to trap and to flushing pipe, etc complete all as specified and directed.

S&F 2nd class hard wood (SAL) plain, solid, straight chowhkats and frames wrought framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints complete all as specified and as diredted.

S&F Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 9 mm thick B.W.P. commercial ply or 12mm thick BWR grade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24(a) of MES Schedule Part-I section-8 complete all as specified.

S&F Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F 30mm thick 2nd class hard wood glazed skelton shutters open rebated and prepaired to recive glass, guage etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters complete all as specified and as diredted

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube, complete all as specified in MES Schedule Part-I (2009),including making good jambs in CM(1:4) with finishes to match with existing, complete all as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site ,complete all as per specification in MES Schedule Part-I (2009) & drawing.

M&L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer compelet all as specified.

M&L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer coplete all as specified

S&F window guard bars, plain, flat in and fixed independently in wooden frames etc and similar articles conforming to Fe-290 Gde E-165 complete all as specified and all as directed

S&F 150mm aluminium anodised barrel tower bolts of extruded section all as specified

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified.

S&F MS butt hinges 100 mm long medium weight complete all as specified and as diredted.

S&F MS butt hinges 75 mm long medium weight complete all as specified and as diredted.

S&F 150 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified.

S&F 125mm extruded aluminum alloy handles, fabricated type anodised complete all as specified.

S&F in repair 300mm long ordinary rat rail rod pattern springs in repair including roller and roller plate complete all as specified.

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane complete all as specified and directed.

All as per item 68 but 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract.

Bajetha Construction

ng associate

M/S CHAUHAN ELECTRIC WORKS