REPAIR AND MAINTENANCE TO OTM ACCN IN GURADS, STN CELL, EME BN, APS AND GURUDWARA UNDER THE AREA OF AGE B/R-I OF GE (ARMY) No.1 JODHPUR.

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed.

Demolition of stone / boulder masonry walling or brick or PCC block masonary, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

Taking down shutters of any description area not exceeding 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description area exceeding 1.0 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

M&L for 35mm thick factory made 2nd class hard wood glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and directed.

S&F 35 mm thick factory made second class hard wood plain framed panelled shutter (any number of panels) with lock rail and pannel of 9 mm thicks BWP commercial ply or 12mm veneered particle board with commercial veneered on both faces the size of rails and style as per IS-1003 (Part-I) kiln seasond and chemicadly pressue treated all as specified and directed.

M&L factory Made flush shutters, 30 mm thick solid core construction with particle board both face covered with decorative face veneer, as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.

M&L for framed brackets for cooler stand of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, confoRMing to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') and used for step/stairs, complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

M& L for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engineer-in-charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with S & F MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engineer-in-charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F aluminium anodised barrel tower bolts of extruded section of 200 mm size complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section of 150 mm size complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt with hasp and staple [bolt type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F butt hinge of size 100mm , medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F stainless steel butt hinge of size 100mm, complete all as specified and as directed.

S&F stainless steel butt hinge of size 150mm, complete all as specified and as directed.

S & F 100mm size single action door spring hinge complete all as specified and directed.

S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm long complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in coping/ benching, DPC, pier caps, bed blocks, for hold fast etc., including mixing with WPC and necessary form work, complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

S & F Hydraulical Door Closer , Aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed complete all as speciied.

S&F brass body 2 levers mortice lock vertical type size 100 mm for aluminium door (as per sample) complete all as specified and directed.

M&L for fabrication of powder coated aluminium frame work as in frames for aluminium windows, Ventilators & Doors with aluminium section weighing 0.55 kg/m with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets etc, complete all as specified and directed.

M&L for pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators etc, complete all as specified and directed..

M&L for pre powder coated Anodised aluminium Shutters for window,ventilator & Door, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as directed & specified . Note : Glass panes & aluminium wiremesh shall be measured & paid for seperately.

S&F galvanised mild steel wire cloth 0.35 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F Replacement of 5.5 mm thick plain sheet glass ordinary quality and glazing with aluminum beading in alumium door/window/ventilators not exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F solar control film 50micron thick non-reflective type sticked to glass panes as per manufacturer's instructions etc,complete all as specified and directed.

S&F lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing thickness of insulated PVC wall lining 12 mm complete all as specified and directed

Dismantling boarding, any description, fixed in any position with screws and complete removal of old connecting snap grid and hangers complete all as specified and directed by Engineer-in-charge.

S & F anodised aluminium snap grid frame work for ceiling 605 x 605 mm using aluminium anodised main tee of size 36.5 x 24 x 1.4mm, Cross Tee of size 23.50 x 26.40 x 1.40mm and angle of size 40 x 25 x 2mm including cutting, drilling, jointing etc. Complete including provision of 3.15mm dia GI wire suspenders fixed with adjustable connectors complete all as specified and directed.

Providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions etc,complete all as specified and directed.

M & L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over & including M&L single coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and as directed.

S&F of 4mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm, complete all as specified and as directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water for wall & ceiling etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 10 mm thick Rendering in CM 1:3 on fair faces of brick work or conc surfaces as in ceilings/chajja/facia & finished even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on stone masonry surfaces n stone masonry/concrete surfaces/roof projections/chajjas upto the height 7 Mtr finished surface fair and even without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed.

M&L for two coats of oil bound distemper on newly plastered walls over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and priming plastered and other surfaces with alkali resistant priming paint including preparation of surfaces all as specified and directed.

M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and over priming plastered and other surfaces with alkali resistant priming paint all as specified and directed.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified and directed by Engineer-in-Charge.

Repair to aluminium window/door and replacement of unserviceable hinging device, handles, loose glass , rubber gasket, making them in serviceable condition including taking down and re-fixing in same opening complete all as specified as directed.( Note: Hydrolic door closer, door spring,glass shall be measured and paid seperately.)

M&L for powder coated aluminium doorseal 1000 mm long, 30 mm wide including dust/insect arrestor complete all as specified and directed.

M&L for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from Bib taps/shower rose/WHB pillar tap/Stop valves complete by Air pressure/ water gravity pressure etc. Complete all as specified & directed.

Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place complete all as specified and directed by E-in- Charge for capacity Exc 500 Ltrs but not exc 1000 Ltrs

Resecuring or easing and adjusting shutters of any description and in any position,n exc 1 Sqm each with taking down of sutters and refixing in same opening after necessary repair complete all as specified and directed.

All as per Item No 62.00 here-in-above but exc 1Sqm but not exc 2Sqm each.

All as per Item No 62.00 here-in-above but exc 2 Sqm but not exc 4Sqm each.

Repair of door including taking down & refixing of shutter in the same opening after repair with necessary 'T' hinge plates stove enameled etc wirh necessary welding & reviting complete all as specified and directed.

S&F mild steel work as in doors frames using MS angle / Tee iron Fe-410-W(Gde-E-250) Quality A complete all as directed.

S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge

M&L 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M & L chequered cement concrete tiles(laquer coated) 30cm x 30cm x 25 mm thick / 20cm x 20cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors/ path etc over and including M&L for screed bed or bedding layer of 15mm thick in CM 1:6 complete all as specified and as directed.

M&L for 25 mm thick cement concrete 1:2:4, type B-0 (using 12.50 mm graded crushed stone aggregate), to receive floor finishes, complete all as specified & directed.

M&L for joint free non skid ceramic coloured tiles (premium quality) of size 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L double/ultra charged Vitrified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm sqm but not exc 1.2 sqm each as in floor and joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles over M&L for 20 mm thick rendering in CM1:6 over stone masonry surfaces & finished even & rough to receive tile. complete all as specified and directed.

M&L Vitrified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm , in floor and joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles over M&L for 15 mm thick rendering in CM1:6 over stone masonry surfaces & finished even & rough to receive tile.complete all as specified and directed.

All as per item No. 73.00 here-in-above, but as in skirting over & including M&L 10 mm thick backing coat in CM 1:4 complete all as directed.

All as per item No. 75.00 here-in-above, but as in skirting over & including M&L 10 mm thick backing coat in CM 1:4 complete all as directed.

M&L for glazed colour ceramic tiles (premium quality) of size 300X450X6-7/ 300 mmx600 mm x7- 8mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 15mm thick backing coat in CM (1:6) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick as in floor over M&L for 15mm thick screed bed in CM 1:6 base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of stone or tiles laid bedded and pointed in any mortar.

M&L for machine cut kota stone slab 16-18 mm thick as in risers, dado, steps, tread, skirting & etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10mm thick screed bed in CM 1:4 including dismantling of stone slabs of any description complete all as specified and as directed.

M&L for 15 to 18 mm thick Udaipur green stone in single piece as required, as in tread, cills, steps, risers, cooking platefoRM & etc., machine cut, (table rubbed and granite polished) best quality as per sample, over & including M&L for 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified.

M&L for rolled mild steel confirming Fe-290 (Gde E-165) in door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering ) and hanging also fastening and fixing complete all as specified and as directed.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

All as per item No. 84.00 here-in-above, but except stone

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed.

M&L PCC solid building blocks 10 cm thick type B1 (20mm Aggregate) 1:2:4 set in cement mortar (1:4) complete all as specified and directed.

S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, complete all as specified and as directed.

S & F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

S&F in replacement of Single piece EWC with slim soft close seat cover complete set constellation dual flush (WB consetellation 5 ped constellation, EWC, cistern & lid CON dual flush, seat cover constellation, cistern fitting (water saver-dual flush) etc complete all as specified and directed

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 450 mm X 550 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long screwed for iron pipe complete all as specified and as directed

S & F in repairs stainless steel kitchen sink without drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

M&L replacement of internal flushing cistern fitting (accessories kit) for low level, make as per existing fitting all as specified and as directed.

S & F in repair 75mm dia out let, PVC ( SWR) floor trap with grating including jointing to waste pipe with solvent complete all as specified and as directed.

S & F in repair PVC connection of 15mm bore and 450mm long with PTMT nuts complete all as specified and as directed.

S & F in repairs fancy type chromium plated Bib tap, cast copper alloy, 15 mm dia, with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed.

S&F of 15 mm bore CP brass Two Way Bib cock screwed for iron pipe of ferrule and fixed complete all as specified and directed.

S & F in repairs, stop valves, 15 mm dia, cast copper alloy , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe etc complete all as specified and as directed.

S&F as in repairs of stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20 mm dia all as specified specified.

S&F as in repairs of stop cock regular body with adujstable wall flange with fancy type chromium plated with (concealed type) 15mm dia for iron pipe etc complete all as specified and as directed.

S & F in repairs angle cock, 15 mm dia, cast copper alloy , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe etc complete all as specified and as directed.

S & F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight 15 mm 90gm), screwed both ends for iron pipe etc complete all as specified and as directed.

S & F in repairs pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs PVC Flexible waste pipe 32 mm to 40 mm dia with socket for steel sink/WHB upto floor level and any length but not less than 0.85 Mtr, complete all as specified and as directed.

S&F in repair 15 mm bore CP brass two way angular stop cock, screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe complete all as specified and directed.

S&F in repair CP brass health faucet with 1200 mm long flexible tube with wall hook and chromium plated two way angle valve, complete all as specified and as directed.

S&F in repairs plastic water closet seat cover white closed patteren with flat bottam and cover and mild steel chromium plated or al hinges device complete all as specified and as directed.

S&F in repairs of CP mild steel grating with or without hole 125 mm dia, complete all as specified and as directed

S&F in repairs of chromium plated swivel joint shower rose of 100 mm dia, cast copper alloy fixing with 15mm bore pipe, with Shower aRM 15 mm size, 195mm long with bend of 45degree with flange, complete all as specified and as directed

Dismantling existing tanks of any description n exc 500 ltrs capacity and removing from site.

All as per item No. 113.00 here-in-above, but tank capacity 1000 Ltrs.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl fixing arrangment for inlet/outlet/overflow & vent pipe of standard size complete all as specified & directed by Engineer-in-charge.

All as per item No. 115.00 here-in-above, but tank capacity 1000 Ltrs.

Disconnecting of existing 500ltr capacity PVC tank , seting aside ( or lowering if required ) for repair , cleaning etc. and hoisting and reconnecting and re fixing in position .

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & 3, plastic ball screwed for iron pipe and fixed. (Minimum weight 2 1 0 g m s .) all as specified & directed.

Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place of capacity exc 250 ltrs but n exc 500 ltrs complete all as specified and directed. Note :- If any accessories damaged occur during the cleaning of tank, the same shall be replaced by the contractor at his own arrangement and nothing extra shall be paid.

All as per item No. 119.00 here-in-above, but tank capacity exceeding 500 ltrs but not exceeding 1000 Ltrs.

M&L plain cement concrete (1:2:4) type B-1using 20mm graded crushed stone aggregate as for undulation on roof surface/padding complete all as specified & directed

M&L for carrying out water proofing treatment for roofs in the following stages - (i) Rendering 20 mm thick in cement mortar (1:4), mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement.Note : (WPC shell be measured separately and paid for under respective item of schedule). (ii) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied waterproofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must. Note : - The work shall be executed by the authorized applicator of the manufacturer only. Note : - 1.The authorized applicator of manufacturer shall be approved by GE. 2.The color of final finish shall be decided by the GE

Supply only water proofing compund (ISI Marked) complete all as specified and as directed..

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100/110mm bore, complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as specified and as directed.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed

S&F 75mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] branch piece, single [single "Y"] equal or unequal complete all as specified and as directed.

S&F 110 mm bore (SWR) PVC bends any radius complete all as specified and as directed.

S&F 75 mm bore (SWR) PVC bends with oval acess door, complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm, complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.

S& F in repairs 75mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed..

S& F in repairs 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

All as per item No 137.00 here-in-above, but size of pipe 20 mm bore.

All as per item No 137.00 here-in-above, but size of pipe 15 mm bore.

Refixing old GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

All as per item No 140.00 here-in-above, but size of pipe 20 mm bore.

All as per item No 140.00 here-in-above, but size of pipe 15 mm bore.

S&F of water GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. (a) 25 mm bore,

All as per item No 143.00 here-in-above, but size of pipe 20 mm bore.

All as per item No 143.00 here-in-above, but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.

S&F 20 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

M&L for Providing precast cement concrete type B-0 1:2:4 (12.5mm graded aggregate) set in CM 1:4 for louvres and jallies, cement grill any type model of zafri 35/40 mm thick (measured solid), including all mould- ings complete all as specified & directed by Engineer-in-charge.

M&L providing precast concrete posts 100x100mm size & 75-100 cm height 1:2:4 type B0 using 12.50 mm graded stone aggregate as in RCC jali post setting in CM 1:6 complete all as specified and as directed.

S&F of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to (Fe 410-W grade E-250) quality A.complete all as specified and as directed.

M&L for Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, including dismantling old existing roof covering sheet of any description, complete all as specified and as directed.

S & F in repairs Door seal as per trade pattern with powder coated aluminium strip 25-30 mm width length having suitable dia holes (for fixing screws) & synthetic strip at bottom to avoid entry of dust etc fixed all as specified & directed .

Demolition of damaged downward hanging projection etc of chhajja (upto height 7m), cutting the reinforcement and rendering 10mm thick CM (1:3) on concrete / stone masonary surfaces finished even and smooth & made corner sharp with proper curing 7 days and applying 2 coats of cement based paint including necessary scaffolding , formwork and taking complete measures of saftey , required T&P etc , complete all as specified and as directed by Engineer-in-charge

NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

M/s Chawariya Enterprises (BID ID -3407402)

mahalaxmi enterprises (BID ID -3408210)

M/S SUMAN ENTERPRISES (BID ID -3413835)