E.T.No.-EDC(USN)04/2025-26

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line.

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual.

Erection of Sp-55 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual

Erection of SP-72 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual.

Grouting of pole in size 0.45x4.45x1/9 of the support in CC ratio 1:4:8(1 cement:4 graded stone 20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO cnstruction manual.

Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc.

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store (PCC Single Pole)

Dismantling of existing HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store (ACSR Rabbit)

Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Painting of SP-72 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint an d two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Laying of 11KV Cable in 1.5 mtr depth with suitable trencheless technology including laying in trench with providing & fixing of HDPE pipe.

Laying, Spreading, Stringing and sagging of 11 KV / 33 KV line in 3 phase (3 Phase 3 wire) of ACSR Dog as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart.

Route cleareance by cutting of tree branches / proning, lopping and chopping of trees for L.T., 11 & 33 KV line.

Jointing and fixing of cable jointing kit indoor/outdoor 11 KV XLPE heat shrinkable cable boxes.

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km).

Cartage of ST pole SP-72 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km).

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 21-50 Km)

Headload cartage of SP-55 Pole from road to site (distance 1-3 Km)

Straightning of Tilted STP Poles

Service of Hydra Machine for Lines and Transformer related work because of busy traffic in Town area for safety purpose.

Tightening of Stay Set.

Resagging of 11 KV Line.

Digging of Pit through Hammer at CC, DAMAR Road.

Fixing of MS Clamp for PCC Pole with Nuts and Bolts

Providing Fresh Jumpers 11 KV/LT line.

Fixing of MS Channel, Angle and all accessories on existing/new double pole.

Digging of PIT and Straight of Tilt Pole.

Erection and Laying of HT 11 KV XLPE Alu. Armoured Cable 3x300 Sq.MM. in HDPE Pipe mixed soil including back filling of earth and erection on pole using MS channel, angle and Clamps etc.

Making loop of 11 KV XLPE Cable.

Annexure-B (SUPPLY ITEMS) (As per UPCL Specifications)

Supply of MS Nut & Bolt off size

Supply of Holding Clamp for SP-55 with N/B

Suppy of X-arm Clamp for ST Pole SP-55 with N/B

Supply of Top Channel Clamp with N&B

Supply of stay Clamp for SP-55 with Nut & Bolt

Supply of 11 KV Fuse Set

Supply of GI Pipe 6 inch Diameter (8 No. 8 m each).

Supply of 65 mm HDPE Pipe.

MANRAJ ELECTRICAL & INFRASTRUCTURE (BID ID -381559)

NUTECH POWER CONTROL (BID ID -382149)