Annual maintenance work of all offices at PH Campus, Chavdi Gate, Bhavnagar

Namer Of Work: Annual maintenance work of all offices at PH Campus,

Sr Gate Bhavnagar

PARTCULARS OF ITEM RATE PER AMOUNT

DEMOLITION WORK & RECOVERY

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) In

Demolition including stacking of serviceable materilas

2 and disposal of unserviceable materials with all lead 1097.15 Cmt

and lift. (i) R.C.C. work

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,

3 holdfasts and other attachment etc. complete and 194.71 No

stacking them within all lead and lift.(i) Not exceeding

3 Sq.M. in area.

Dismantling santtary fittings like wash basin . W.C. pan

Indian and European type, flushing tank etc. including

stacking the materials with all lead and lift.

Dismentling steel work including distempering and

5 stacking the materials with all lead and lift. 3.90 Kg

6 Recovery for bricks -3.00 No

7 Recovery for RCC steel -30.00 Kg

8 Recovery for door, window & ventilation -500.00 No

9 Recovery for Fabrication steel -30.00 Kg

A Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 500 meter.

1 (A)- Loose soil 124.61 Cmt

2 (B)- Dense or Hard Soil 159.30 Cmt

3 (C)- Hard murrum 272.60 Cmt

B Excavation for foundation for depth from 1.5 Mt to

Mt. depth including sorting out and stacking of useful

materials and disposing of the excavated stuff upto

4 (C)- Hard murrum 291.14 Cmt

5 (D)- Soft rock not requiring Blasting 304.12 Cmt

6 Filling available excavated earth (excluding rock)

trenches, plinth side of foundation etc. in layer not

exceeding in 20 cm. in depth consolidating each

deposited layer by ramming & watering.

7 Filling in foundation and plinth with murrum or

selected soil brought from out side with any lead in

layers of 20 cm. Thickness including watering,

pnumatic ramming and consolidating etc. comp

8 Filling in plinth with sand under floor including

watering, ramming, consolidating and dressing etc. 484.44 Cmt

9 Applying general insecticide pest control treatment to

floors, cupboards etc including labour material etc.

complete. Using Heptachloride 20 EC. As Per

6113_pests Consentration Weight 0.50 percent is

recommended one litre chemical emulsion dillute with 39.62 Smt

39 liter of water will give. Total dillute concrentration

10 P/L cement concrete 1:3:6(1 CEMENT: 3-Coarse sand:

6 - Hand broken stone aggregate 40MM nominal Size)

and curing complete excluding the cost of formwork

in.- Foundations and plinth.

11 Providing and laying cement concrete M-150 (1cement

: 2coarse sand : 4 graded stone aggregate 20 mm.

Nominal size) and curing complete including cost of 5126.25 Cmt

form work in (A) - foundation footings, Base of

Columns and mass concrete

P/L controlled cement concrete M 250 and curing

complete including the cost of form work and

excluding reinforcement for reinforced complete work

12 (A)- foundation footings, Base of Columns and mass

13 (C)- Beam, Lintel, chhajahs, Shelvas etc. upto floor one

14 (C)- Beam, Lintel, chhajahs, Shelvas etc. above floor

15 (C)- Beam, Lintel, chhajahs, Shelvas etc. above floor

16 (C)- Slab, for upto floor two level. 7628.52 Cmt

17 (C)- Slab, above floor two level. 7669.88 Cmt

18 (D)- Columns, Pillars Posts and Struts up to floor two

19 (D)- Columns, Pillars Posts and Struts above floor two

20 (D)- Columns, Pillars Posts and Struts above floor three

(E)-Staircases excluding landing upto floor two level. 7406.51 Cmt

22 Providing TMT Bars confirming to IS 1786 FE 500D for

R.C.C. work including bending, binding and placing 76.52 Kg

in position complete up to GF level

23 Providing TMT Bars confirming to IS 1786 FE 500D for

R.C.C. work including bending, binding and placing

in position complete above FF level

24 Providing TMT Bars confirming to IS 1786 FE 500D for

R.C.C. work including bending, binding and placing

in position complete above SF level

25 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- 4268.05 Cmt

Cement : 5 -fine sand)(B) Conventional

26 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

Superstructure in Cement Mortar 1:5. (1- Cement : 5 -

fine sand)(B) Conventional

27 Brickwork using common burnt bricks having crushing

strength not less than 35 kg./Sq.Cm. in Super Structure

up to floor two level. in Cement Mortar 1:5 (1- Cement

: 5 -fine sand) - FF

28 Brickwork using common burnt bricks having crushing

strength not less than 35 kg./Sq.Cm. in Super Structure

up to floor two level. in Cement Mortar 1:5 (1- Cement

: 5 -fine sand) SF

29 Half Brick masonary in common burnt building bricks

having crushing strength not less than 35 Kg. / Sqmt. in

cement mortar 1:4 (1-Cement : 4-Coarse Sand) in 689.60 Smt

above Plinth level up to floor two level. C- Brick work

31 Providing 15 mm. Thick cement plaster in single coat

on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even and 249.41 Smt

smooth in (i) C.M.1:3 (1cement : 3 sand)- For walls

finishing with a floating

coat of neat cement slurry.

32 Providing 15 mm. Thick cement plaster in single coat

on both sides Brick/concrete walls for interior

plastering above floor two level and finished even and 273.63 Smt

smooth in (i) C.M.1:3 (1cement : 3 sand)- For walls

finishing with a floating

coat of neat cement slurry.

33 Providing 10 mm. Thick cement plaster in single coat

on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even and 198.95 Smt

smooth in (i) C.M.1:3 (1cement : 3 sand)- For Celling

34 Providing 10 mm. Thick cement plaster in single coat

on both sides Brick/concrete walls for interior

plastering above floor two level and finished even and 225.36 Smt

smooth in (i) C.M.1:3 (1cement : 3 sand)- For Celling

35 20 mm. Thick sand faced cement plaster on walls up to

height 10 meters above ground level consisting of

mm. Thick backing coat of C.M. 1:3 (1 cement : 3 sand) 347.10 Smt

and 8 mm. Thick finishing coat of C.M.. 1:1 (1 cement :

1 sand) etc. complete.

36 Providing cement vata 10 x10 cm size quarter round in

cement concrete in C.M. 1:1 including neat cement 24.04 Rmt

finishing watering etc. complete.

37 Providing and laying Broken China Mosaic flooring for

terrace using 12 mm to 20mm broken pieces of glazed

tiles to be laid over cement mortrar 1:3 to plain or

slope and to be tampred to bring mortar creme out up

to surface using white cement including rounding off

junctions and extending them up to 15cm along the

wall, clearing with water and oxalic acid etc. as

38 Providing and laying 24" x 24" Vitrified 8mm thick tiles

flooring over 20mm (Average) base of Cement Mortar

1:6 (1-Cement : 6 Coarse Sand) on new surface or

fixing on existing flooring by adhesive materials 1281.70 Smt

including dismentalling of existing flooring and jointed

with colour cement slurry including finished with flush

pointing & cleaning the surface etc. complete for Light

39 Providing and laying coloured glazed tiles of the size

floring, skirting, risers of steps and dedo on 10mm 1508.58 Smt

thick cement plaster 1:3 (1-Cement : 3-Coarse sand) &

jointed with white cement slurry.

40 Providing and laying granite stone slab flooring over

20mm (average)base of cement mortar 1:6 (1-cement :

6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse

sand) laid and jointed with gray cement slurry

including rubbing and polishing complete. (A) granite

slab 18mm thick

41 Providing and laying polished kotah stone slab

Flooring over 20 mm (Average ) thick bases of cement

mortar 1:6 (1- cement : 6 coarse sand ) or LM 1:1:5 (1

lime putty : 1.5 coarse sand ) laid over and jointed 1009.30 Smt

with grey cement Slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc.

completed (A) 25mm thick

42 Providing and laying kotah stone slab 25 mm thick in

riser of steps, dedo and pillars laid on 10mm thock

cement mortar 1:3(1- cement : 3coarse sand ) and

jointed with grey cement Slurry mixed with pigment to 1124.24 Smt

match the shade of slab including rubbing and

polishing etc. completed, kotastone -25mm thick

43 Providing & laying 20 to 25mm thick, both faces

polished kotah stone with all edges machine cut up

to 450mm width and of required length (only one

piece to be used ) of approved quality for cupboard 1263.21 Smt

shelves including fixing the same in masonry wall by

cement mortar in three sides including curing etc.

complete as directed by E.I.C

44 Providing and fixing fully glazed/partly glazed Single

door shutter made, frame of 10.15cmX4.45cm

aluminum section, and Shutter-Top & vertical section

of 8.5cmX4.45cm size and bottom section of

11.40X4.45cm size, using 5mm thick "TRIVENI" or HB4

plain glass glazing deep rubber gasket with locking 5397.50 Smt

arrangement, all fixtures & fastening of anodized

section with all labours & materials etc. complete as

per drawing & as directed by EIC Complete as per

drawing and as directed by E.I.C..

45 Providing, & fixing hot pressed phenol bonded,

exterior type solid flush door 30mm shutter made by

approved brand & as per I.S.I. standard with water

resisting plywood facing and 1mm thick laminated

sheet on both side of door & teak wood leaping all-

round including 100X75mm. teak wood frame.If

necessary with glass looking window with T.W. batten

and polishing /Colour. Rates are without fixtures &

fastening but with 3 NO. of 100mm. long butt or

parliamentary hinges on each flap of double shutter &

150mm. long hinges for single shutter and 3 NO. of

M.S. flat hold fast grouted in C.C. (1:2:4) on each side

of frame, 3 coats of oil painting of approved shades

make etc., complete as per drawing & as directed by

Providing and fixing FRP frame 100X50 mm and 28 mm

thick FRP depressed pannel shutter having extra

reinforcement on sides and edges and in Gel coat

finish.The core of the shutter & frame is to be filled up

with injected fire retardent grade polyurethane foam

done in situ along with embedded wooden pieces for

stiffening and also for taking hinges and all fixures. The 2354.22 Smt

whole FRP Frame and shutter is to be water proof,

weather proof, termite proof and resistance to mild

acid/alkali.Rates are to be inclusive of S.S. hinges with

necessary screws and allumunium fixtures & fastening

& fastener sleeve.

47 Providing and fixing Window having extruded

Alluminium Colour anodized section frame main outer

size 63.50 x 38.10 x 1.95mm (of Jindal Section No.

4605, @ Wt. 1.094 Kg./Rmt.), horizontal two track

member size 61.85mm x 31.75mm x 1.20mm (of Jindal

Section No. 8687 @ Wt. of 0.695 Kg./mt.), vertical

member of size 61.85mm x 31.75mm x 1.30mm (of

Jindal Section No. 8758 @ Wt. of 0.659 Kg./mt.) with

sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal Section No. 8949 @ Wt. of

0.456 Kg./mt.), vertical member of size 40mm x 18mm

x 1.29mm (of Jindal Section No. 8947 @ Wt. of

Kg./mt. / Section 8948 @ Wt. 0.457 Kg./mt) with 5mm

thick transparent bronze colour tinted float glass with

powder coated alluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

detailes etc. complete for Window

48 Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm (Jindal

Section :2434, @ Wt. 0.643 kg per mt with colour 1163.92 Smt

Powder Coated alluminium frame for ventilation with

5 mm thick frosted glass as details etc complete for

49 Providing &fixing in position fully panneled/partly

pennaled partly glazed/ full height/ half height

alluminium frame partition if necessary colour

anodized coated rectangle section in 75 x 38 mm

vertical & horizonal to be used for top all intermediate

bottom & side ends panels.Pannels is to be prepared

from 5 mm thick Modiguard or equivalent approved

standard quality coloured/plain glass or 12 mm eco 4085.98 Smt

board prelaminated both side of standard and

approved quality with glazing clip rubber gasket with

aluminium bedding of required size, All glazing should

be designed with decorative film if necessary.Scope

includes all fixtures and fastening and screws

etc.completed as directed by EIC.Pennaling is to be

done as directed by EIC.

50 Providing & fixing MS plain grills of required pattern to

wooden frames of windows and gap filling of wall etc.

with MS flats or M.S, pipes at required spacing and

frame all- round square or round bars with round 112.68 Kg

headed bolts and nuts or by screws with one coat red

oxide & two coat of oil paint (A) plain grill

51 Applying two coats of Birla or Asian acrylic lapy (

putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even 40.19 Smt

shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand papered smooth.

52 Providing & applying 1 coat of approved make of

primer paint including scaffolding etc., complete as 28.00 Smt

directed by E.I.C.

53 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly 83.98 Smt

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.- in

54 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly 89.58 Smt

55 Finishing Wall with Weather Proof Exterior Emulsion

Paint on Wall Surface (Two Coats) to give an required

shape even shade after thoroguhly brushing the 120.93 Smt

surface to remove all dirt, and remains of loose

powdered materials etc. complete

56 Providing & Fixing of ISI approved quality hydraulic

door closer as directed.

57 Providing erecting fixing double coated Syntex of

Equivalent PVC ( ISI ) mark Water tank of required

capacity each with all necessary fittings and 3.91 Ltrs.

connection etc complete on terrace as directed by EIC.

58 Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at 71.93 Rmt

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials....15mm dia.

59 Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed 90.93 Rmt

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. 25mm dia.

60 Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at 117.97 Rmt

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.....32mm dia.

61 Providing laying and jointing in true line and level

U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at 193.73 Rmt

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.......50mm dia

62 Providing and fixing ISI quality heavy gum metal check

or non return valve full way wheel valve - 25MM 416.47 No.

63 Providing and fixing ISI quality heavy gum metal check

or non return valve full way wheel valve - 40MM 656.86 No.

64 P/F Wash basin with single hole for pillar tap with

providing and fixung 15mmC.P. brass quarter turn

pillar tap, capstan head screw down high pressure with

screws, shanks and back nutswith C.I. or M.S. Brackets 2570.59 No.

painted white paint including all material and labour

65 Providing & Fixing colour porcelain lip shaped wall

type URINAL PAN of approved quality & make

including waste coupling bends & necessary outlet of 1489.36 No.

25mm.dia. G.I Pipe connections including

providing,flush cock, P.V.C. connection etc., complete

66 Providing and fixing wash down closet (European W.C.

Pan) with integral "P" or "S" trap and PVC flushing tank

cistern with fittings and incl. plastic seat and cover 6004.37 No.

with brass hinges and rubber buffersand PVC

connector , nozzle etc. including jointing tr

67 Providing & fixing PVC SWR nahni trap IS 14735 for

drain -75mm diameterr with Jali of the following

nominal diameter of self cleansinf design with CI 582.44 No.

scread down of higed grating including the cost of

cutting and making good the walls.

68 Providing and fixing S.W Gully trap with C.I Grating

brick masonary chamber and water tight C.I cover with

frame of 300MM x 300MM size (inside) with standard 1234.57 No.

weight. [I] Square mouth traps. [B] 150MM x 100MM

size 'P' or 'R' type.

69 Providing and fixing screw down quarter turn bib taps

of following size -Brass cromium plated screw down 184.98 No.

bib tap -15 mm dia..

70 Providing B.B. Masonry inspection chamber

(MANHOLE) of approved size including light type C.I.

Cover with frame, necessary excavation bottom

concreting of .C.C. (1:3:6) 150mm. thick/ 225mm. thick

B.B. Masonry in C.M.(1:6) 12mm thick cement plaster

in C.M.(1:3) inside & to all exposed faces up to

300mm. below ground level, curing etc., including 3858.70 No.

disposal off surplus excavated earth up to radius of

300 mt. including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed by

E.I.C., with free supply of cement by the Board

(B.B.MASONRY UPTO 1000mm. DEPTH.)--300X300 mm

71 Providing B.B. Masonry inspection chamber

(MANHOLE) of approved size, necessary excavation

bottom concreting of .C.C. (1:3:6) 150mm. thick/

225mm. thick B.B. Masonry in C.M.(1:6) 12mm thick

cement plaster in C.M.(1:3) inside & to all exposed

faces up to 300mm. below ground level, curing etc.,

including disposal off surplus excavated earth up to 6027.83 No.

radius of 300 mt. including 3 coats of white or colour

wash to all exposed finished surface etc. complete as

directed by E.I.C., with free supply of cement by the

Board (B.B.MASONRY UPTO 1000mm. DEPTH.)--

600x450mm clear size

72 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with 168.00 Rmt

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -75mm Dia.

73 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with 219.00 Rmt

approved solution & all fittings like bend, tee. Y bend

74 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend 312.00 Rmt

plug bend with water tight jointsIf pipe laid in

trenchesscope -110 mm Dia.

75 Providing & fixing to wall, ceilling, and floor in plumb

by means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 6.00 Kg. /cm2 working pressure

polythene pipes of approved brand incl. joining with 516.00 Rmt

approved solution & all fittings like bend, tee. Y bend

plug bend with water tight jointsIf pipe laid in

trenchesscope -160 mm Dia.

76 Providing & Fixing light type C.I. Manhole covers with

water tight C.I. Frame & fixing the same in concrete

etc., complete as directed by E.I.C. 600mm x 450mm

size not less than 35 kg.

77 Providing & Fixing 600X450X6mm. thick size approved

best quality of looking glass mirror Modi or gold fish,

mounted on 6mm thick ply with edging with PVC angle 850.90 No.

patti as directed with fixture as required.

78 Providing and fixing in position callapsible steel

shutters with vertical channels 20 x 10 x 2 mm braced

with flat iron diagonals 20 x 5 mm size with top and

bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, 6200.22 Q

steel pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including applying a

priming coat of read lead paint.

79 P & F steel cupboard shutter of 20 gauge with steel

frame & fixing the frame with brick masonary including

locking arrangement with 1 coat of primer ( red oxide )

i.e asian, dulux or its equivalent and 3 coats of 3730.00 Smt

approved oil paint i.e asian, dulux or its equivalent etc.

complete as per requirement and instruction of EIC.

80 P/F brass towel rail complete with C.P. Brass brackets

fixed with C.P. Brass screws.-600 X20 mm size. 610.32 No.

81 Providing and fixing stainless steel font on any surface

upto 10 mtr height with necessary fasteners and

fixtures etc completed as directed by EIC.

82 Steel work welded in built up setions, framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint and two coats

of oil paint:- (A) In beams and joists, channels angles 95.183 kg

Tees, flats, with connecting plates or angle cleats as

in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

83 Providing 2500mm internal diameter & 3.0 Mt. Deep

soak pit including excavation in all types of soil & soft

rock & CC(1:3:6) bedding, 300 mm thick below

masonry and 450mm thick B.B Masonry in CM(1:6) up

to 600mm height, 350mm thick for further 600mm and

230mm thick for remaining height honey combed,

plastering in CM(1:3) outside up to 1.5 Mt height and

100mm thick M200 RCC slab with 600x600mm

C.I.HEAVY duty cover with frame, with necessary 77018.18 No.

reinforcement as per design & C.I Vent pipe 1800mm

long with B.B masonry pillar 350x350x450 plastered all

around filling with 40 to 50mm size brick bats up to

Mt depth, including 16mm dia M.S’U’ shape steps,

refilling including disposal of the surplus excavated

earth up to the lead of 500mt. Radius including 3 coats

of white or colour wash to all exposed finished surface

etc. complete as directed by E.I.C.

84 Providing and fixing precast rubber dye inter locking

concrete block 60mm thick with grade of concrete M-

300 pnumatic comressed by mechanically pressed and

as per approved design including 35mm sand layer for 700.54 Smt

levelling and filling the joint with sand in proper line

and level etc comp as per directed.

85 Supplying & stacking 40 to 60mm size hard stone road

black crushed metal including Spreading,Watering

consolidating By 8 to 10 tonnes power roller 1099.52 cmt

transportation filling the box etc. complete. (box

measurement shall be paid with 20% void deduction

86 Supplying & stacking murrum of approved quality

including Spreading,Watering consolidating By 8 to

tonnes power roller transportation, filling the boxes 570.95 CMT

etc. completed as directed. (Box measurement will be

paid with 15% deduction of voids).

87 Providing and fixing fully glazed/partly glazed Double

door shutter made, frame of 10.15cmX4.45cm size ( @

Wt 1.37 Kg/Rmt) aluminum section, and Shutter-Top &

vertical section of 8.5cmX4.45cm size ( @ Wt

Kg/Rmt) and bottom section of 11.40X4.45cm size( @

Wt 1.50 Kg/Rmt) , using 5mm thick "TRIVENI" or HB4 6926.74 Smt

plain glass glazing deep rubber gasket with locking

arrangement, all fixtures & fastening of anodized

section incl. floor mounted spring with all labours &

materials etc. complete as per drawing & as directed

by EIC Complete as per drawing and as directed by

88 Providing and fixing Stainless Steel railing having

mm dia, hollow stailess steel pipe hand rail and 40 mm

dia. Hollow stainless steel pipe with combination of

cm long 20 mm dia pipe as vertical support with

mm dia hollow pipes 3 rows as intermidiate members 3135.00 Rmt

running throughout with steel bol as cap at each end

including cutting, bending, welding & fabrication the

structure as per drawing in 404 grade of steel etc.

completed as per instruction.

89 Providing and fixing eco-friendly lightweight calcium

silicate false ceiling tiles having Tegular edge &15mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Lightweight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity 0.043°w/mKC. for the best

thermal Insulation .The Lightweight calcium Silicate

tiles hall be of approved texture Fine fissured/

Spintone/ Cosmos having NRCvalue of 0.5&Globe

having NRC value of 0.75NRC or equivalent of

size595X595mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per

sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and 1657.57 Smt

sizeof24X38mm made from 0.30mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm(Minimum)sheet

spaced 1200mm along spaced between main‘T’at

600mm centre to centre to form a grid of

1200X600mm and secondary cross’T’ of length 600mm

and size24x28mm made of 0.30mm thick (Minimum)

sheet tobe interlocked at middle of the 1200X600mm

panel to form grid of size600X600mm resting on

periphery walls/partitions on a perimeter wall angle

pre-coated steel of size (24X24X3000mm made of

0.40mmthick(minimum sheet with the help of

rawlplugs at 450mm centre to centre with25mm long

drywall screws@230mm interval and laying

Providing DensifiedG.I.

corrugated edges light

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete 726.92 Smt

excluding the cost of purlins, Rafters and Trusses.(1)

0.80 mm thick sheet. (upto 10 ton)

91 Providing full round moulded round front edge in

trade of steps including rubbing and polishing etc. 132.00 Rmt

92 Providing Half round moulded round front edge in

trade of steps including rubbing and polishing etc. 94.50 Rmt

93 Providing and fixing roling shutters of approved make

made of 80 mm. Wide M.S. Laths interlocked together

through their entire length and jointed together at the

end locks mounted on specially designed pipe shaft

with bracket plates, guide channels and out side 3519.21 Smt

locking with push-pull operation including the cost of

Hood cover and spring etc. complete.

(A) Shutters having width below 3.5 M.

94 Drilling of bore well of 165mm.dia. by machine in all

kind of soil, sand, clay, murrum, soft rock & hard rock

etc., complete, truly vertical with all equipments and 264.00 Rmt

labours etc., complete as directed by E.I.C. a) 0 to

95 As above but b) 151 to 180 M depth. 302.00 Rmt

96 Providing, fixing & lowering heavy duty 10 KG / CM2

P.V.C. casing pipe suitable for 160 mm dia bore well

including necessary coupling connector, solution etc.

complete as directed by E.I.C.

97 Providing and fixing best quality of HDPE pipe of

98 Providing and fixing of cable Laxson or equivalent

brand 4 mm three core copper ISI approved make incl.

connecting with submersible motor and with approved 110.00 Rmt

tap to HDPE pipe at 3.0 mt interval etc. completed.- for

99 Providing and fittings of standard swith board with

Ampere and Volt meter , fuse etc.suitable for single

phase submersible pump with metal/wooden covered 1950.00 No.

box with locking arrangements and fiiting on wall as

100 Supplying and lowering 5 H.P. Three Phase.

submersible pump of approved brand with ISI mark

including lowering vertically, fitting with HDPE pipe

and top clamp and connecting cable with motor and 29900.00 No.

switch board including all necessary accessary like

Nipple, Bore Cape, Bussing, Non Return Valve Etc.

including and commissioning etc. completed.

101 Providing & fixing of wall cupboard shutters using

18MM plywood with Wood Framing size of 25 x

mm, decorative laminate of approved shade & brand

on front side and backside with white laminated sheet.

Including finishing with beading patti and polishing the

same. Fixing of door with hinges, one number of 6396.00 Smt

magnet and door handle on each door and one

number of door lock and stopper for locking

arrangement good quality etc. Complete including

materials and labour as direction of Engineer in

102 Providing and fixing pre-cast concrete Kerb stone of

grey cement based concrete block 30 cm length, 30cm

height and 15cm thick of M-200 grade concrete as per

approved design and including excavation for fixing in 408.05 Rmt

proper line and level, filling the joint with C.M. 1:3 ( 1-

Cement : 3-Sand ) etc complete as directed by EIC.

103 Providing and fixing MS wire mesh(Chicken mash) at

every joint of masonary and concrete, or any joint

includding all fixtures and fittings as directed by EIC.

104 Providing and fixing of Roller blind with fabric

properties of polyester with chain mechanism type

with 100% operating height as directed by EIC

105 Providing and fixing wall cupboards, of 12" depth using

18MM plywood for sides & shutters, 6MM plywood at

backside laminate of approved shade for all sides and

inside white laminate including materials such as 8358.00 Smt

beading strips, handles, magnets, adhesive having

good quality of locking arrangements including labour

complete in all respect as directed by EIC.

106 Providing and fixing wooden partition of sandwich

type36mm thick made up of @ 600mm x 600mm grid

made up of 18mm thick plywood frame with 6mm

thick plywood on either side laminated with 1.00mm 5046.00 Smt

decorative sunmica of approved design including

bidding and polishing of same inclusive of all types of

material and labour etc.. complete as directed by EIC.

In Words : Rupees Ten Lakh Only.

The bidders are requested to submit price – bid (Schedule – B) on-line only and not to submit

the price bid in physical form. This is mandatory. If price bid is submitted in physical form, same