Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 CrQualified | ₹2.4 Cr | L1 | Qualified MSE, MII, Category: General |
| 2 | L2₹2.4 Cr+₹55,540 (0.23%)Qualified B 1023 NATIONAL HIGH WAY KANSIPORA BARAMULLA KANSIPORA KANISPORA BARAMULLA JAMMU KASHMIR 193103 UDYAM JK 03 0001401 01AAFFH7641P1Z6 R M | BARAMULLA | JAMMU AND KASHMIR | 193103 | ₹2.4 Cr+₹55,540 (0.23%) | L2 | Qualified MSE, MII, Category: General |
| 3 | L3₹2.4 Cr+₹88,093 (0.37%)Qualified | ₹2.4 Cr+₹88,093 (0.37%) | L3 | Qualified MSE, MII, Category: General |
| 4 | Qualified | - | - | Qualified MSE, MII, Category: General |
| 5 | Qualified | - | - | Qualified MSE, MII, Category: General |
Tender Value
₹2.1 Cr
EMD Value
₹6.3 L
Closing Date
8 Jul 2024, 1:00 pmClosed
LIVING BUNKER
6528072
GEM/2024/B/5058304
Two Packet Bid
ISMB size 150 x 75mm wt 15 Kgs per RM of 5.05m long,ISMB size 150 x 75mm weight 15 Kgs per RM of 5.
60 days
Jammu And Kashmir; Baramulla, Jammu And Kashmir; Dungarpur
Total value wise evaluation
BOQ
8 documents required · 8 mandatory
3 yrs
₹3
40%
₹6.3 L
22 Jul 2024
16 Jun 2024
8 Jul 2024
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | ISMB size 150 x 75mm wt 15 Kgs per RM of 5.05m long | ISMB size 150 x 75mm wt at the rate of 15.00 Kgs per RM of 5.05m long shall be welded with 02 Nos x 5mm thick MS plate of size 250x75x5mm on both ends of ISMB and including MS plates shall have 02 Nos x 16mm dia predrilled holes per plate for fixing fdn bolts also including 04 Nos x 100mm long 16mm dia fdn bolts which shall be grouted with 150mm thick RCC roof band and conforming to relevant IS. | 30 | Nos | flowersepo | 60 |
| 2 | ISMB size 150 x 75mm weight 15 Kgs per RM of 5.60m long | ISMB size 150 x 75mm wt at the rate of 15.00 Kgs per RM of 5.60m long shall be welded with 02 Nos x 5mm thick MS plate of size 250x75x5mm on both ends of ISMB and including MS plates shall have 02 Nos x 16mm dia predrilled holes per plate for fixing fdn bolts also including 04 Nos x 100mm long 16mm dia fdn bolts which shall be grouted with 150mm thick RCC roof band and conforming to relevant IS. | 15 | Nos | flowersepo | 60 |
| 3 | ISMB size 75 x 40mm of 5.05m long | ISMCs size 75 x 40mm of 5.05 m long shall be welded with 02 Nos x 5mm thick MS plate of size 175x50x5mm on both ends of ISMC and MS plates shall have 02 Nos x 12mm dia predrilled holes per plate for fixing fdn bolts and including 04 Nos x 100mm long, 12mm dia fdn bolts which shall be grouted with 150mm thick PCC of ratio 1 2 4 of size 400x175x150mm over roof band and conforming to relevant IS | 25 | Nos | flowersepo | 60 |
| 4 | 20 Nos x 12mm dia, 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm | 20 Nos x 12mm dia 150mm long foundation bolt to welded with 150mm long MS angle of Size 50x50x6mm at roof for fixing Rafter 12 Nos and at rear to fix purlin 8 Nos and conforming to relevant IS Total 20 Nos of Fdn bolts reqd fto weld with MS angle. | 100 | Nos | flowersepo | 60 |
| 5 | Steel Roofing Trough SRT of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel confroming relevant IS complete | Steel Roofing Trough SRT of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel confroming relevant IS complete with set of 14 Nos MS hexagonal nuts. Bolts and bitumen and steel washers 12 mm dia 40mm long and a spanner OJDE of size 20 to 22 per 10 Nos of SRT including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 25.00 Kgs 5 percentage tolerance. | 120 | Nos | flowersepo | 60 |
| 6 | Steel Roofing Troughs SRTs of size 1270 mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel | Steel Roofing Troughs SRTs of size 1270 mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel conforming torelevant IS complete with set of 14 Nos MS hexagonal nut bolts and washers 12 mm dia 40mm long and a spanner OJDE of size 20 to 22 per 10 Nos SRTs including applying two coats of synthetic enamel OG paint over a coat of red oxide primer. SRT shall not be less than 18.68 Kgs, 5 percentage tolerance. | 180 | Nos | flowersepo | 60 |
| 7 | Pre cast RCC beams 110x110x1420mm minimum M 25 Grade. | Pre-cast RCC beams 110x110x1420mm minimum M-25 Grade. Four Nos 10mm dia TMT bars two each on top and bottom with 8mm dia MS bar stirrups spaced at 150mm cc will be provided as reinforcement complete all as per drg and also supply including 2 Nos MS flat for size 40mm x 6mm and 150mm long nut bolt arrangement as shown in the drawing. MS Flat strips of qty 130 Nos and 150mm long nut and bolts with washer of qty 260 Nos shall be provided with each PD by L1 Vendor. Steel Bar Make to be used ISI marked only. | 755 | Nos | flowersepo | 60 |
| 8 | Pre prefabricated Steel door confirming to IS 1038 of 1938 of size 900mm x1800mm. | Pre prefabricated Steel door confirming to IS 1038-1938 of size 900mm x1800mm. The door chowkhat frame made angle iron 50mm x 50mm x 6mm with 03 Nos holdfasts 150mm long each side of angle 35x35x5mm and shutter outer frame made of angle 35 x 35 x 5 mm covered with 2mm thick black carbon sheet welded or riveted on shutter frame work. Bracing 02 Nos x 1.22m long MS flat 50x6mm at braces in middle and 02 Nos diogonal bracing support to be provided made of MS FI 50x6mm at top & bottom door panels. 3 Nos 150mm butt hinges 2 Nos MS tower bolt 200mm long 01 at Top and 01 at bottom of shutter 2 Nos MS bow handle 125mm long two No MS sliding bolt 300mm long of 20mm dia plain round bar including all requisite iron mongery fittings with steel door. Applying two coat of synthetic enemal paint OG over one coat of red oxide primer before supply of door complete . All materials shall conforming to relevant IS | 5 | Nos | flowersepo | 60 |
| 9 | Steel window of size 1200mmx300mm | Steel window of size 1200mmx300mm shall be provided. The main frame work shall be MS angle of size 50 x 50 x 6mm and 02 Nos of shutters shall be made from 6mm thick MS plate. Whereas MS angle frame at top and bottom shall be split in to two rows to slide the shutters smoothly within MS angle. MS angle shall be split into rows by welded with two nos of MS flat of size 50x6mm one at mid and other at edge along the length of the angle. Two Nos of bow handles shall be provided for easy opening and shifting the shutters. Two Nos of 100mm long tower bolts shall be provided. Chain link mesh wire of dimension 50x50x3.6mm shall be fixed with the help of MS flat 50x6mm over the window frame by welded externally iIncluding of all iron mongery etc. Windows shall be painted with two coats of OG Synthetic enamel paint over one coat of red oxide primer. | 20 | Nos | flowersepo | 60 |
| 10 | 0.60 mm thick PPGI sheet of size 4270 mm x 1000mm for roof at entrance | 0.60 mm thick PPGI sheet of size 4270 mm x 1000mm for roof at entrance. | 15 | Nos | flowersepo | 60 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_6528072.pdf
GEM_BID
living_bunker_2024-06-16-12-17-33_0dd7cef683cfe3d3d45b1fc74423e0fe.pdf
BOQ
living_bkr_-_copy_2024-06-16-12-17-33_595a7b175c615788aee49398f6f2104c.csv
BOQ
CERT_740f53f2-92f8-433e-a15b1718521320949_flowers39fdpk.docx
OTHER
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .