Construction of School of Nursing inDr R. P. Govt. Medical College at Tanda in Distt Kangra (Himachal Pradesh). Deposit Work

Amount

Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, shoring, strutting or bailing out water (Surface and sub soil water) upto any depth or height any quantum of water including de-watering removal of slush, lift upto any height, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or wedging out rocks where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height any quantum of water including slush which may arrise during dewatering any other mixed variety of soil, lift upto any height, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths, sides of foundations etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specifications, approved drawing, design, specification and as per the entire satisfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in vertical fins and vertical sun breakers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling in plinth dry hand packed with hard stone approved quality under floor including watering, ramming, consolidating and dressing complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic metre to give a smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete in all depths/thickness upto all floors levels as per specifications, drawing, design as per entire satisfaction and direction of Engineer-Incharge including carrige of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum comressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/thickness upto all floor levelas per specifications, approved drawing, design as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical and horizontal walls/fins (thickness not more than 0.10m) (Zero point one zero metre) individually or forming box louvers and projected band upto all floor level as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed, vibrated and curing complete for reinforced concrete in Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work but excluding the cost of reinforcement for reinforced concrete work up to all floor levels up to all height as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and specifications. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls (thickness not more than 0.10m) (Zero point one zero metre) individually or forming box louvers and projected band upto all floor level as per specifications approved drawing, design including carriage of materials within all heights leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-Incharge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated to give smooth and even surfaces including centring, shuttering but ecluding the cost of and reinforcement as in mouldings, cornices, windows sills etcetera to any girth, as per specifications, drawing and design complete, as directed by the Engineer-in-charge.upto floor all levels including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying plain cement concrete work of grade M-20 (M- twenty) obtain the minimum ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre to give a smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work plain concrete work in foundation and plinth in all depths/thickness upto all floors levels as per specifications, drawing, design as per entire satisfaction and direction of Engineer-Incharge including carrige of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Tor steel reinforcement of TATA/Sail/Tisco for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) thick and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry using common burnt clay building bricks in super-structure upto any floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class half masonry using brick common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:3 (One cement: Three sand) with hoop iron and curing complete including carriage of material within all leads, lifts of materials and other incidentals, as per approved specifictions drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying second class half brick thick honey comb brick work with common burnt clay building bricks in cement mortar 1:4 (One Cement : Four sand) including entire carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 40mm (Forty millimetres) thick brick bat including consolidation complete under sock pit including entire carriage of material within all leads, lifts and other incidentals. as per approved specifications drawing, design and as directed by the Engineer-In-charge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 20mm (Twenty millimetres) thick Cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) thick in girth, grooves along walls joints etc and finished even and smooth with cement mortar 1:3 (1 Cement :3 sand) including entire carriage of material within all leads, lifts and other incidentals. as per approved specifications drawing, design and as directed by the Engineer-In-charge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick both sides water proof particle preliminated board BWP phenol bonded exterior/interior grade of Action/Tesa/Century/Kitply/Green ply of approved shade for doors in fill panels complete including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and manufacture complete box of cup board shall be made of 25mm (Twenty five millimetres) thick water proof termite resistance commercial board of Uniply/Green ply/ Century ply/Dura ply Marino ply back side of cup board shall be 8mm (Eight millimetres) thick in shutters and shelves water proof ply as per detail/drawing. The shutters of all side shall have 6/12 mm (Six/Twelve millimetres) thick hard wood edging to be finished 1mm (One millimetres) thick laminated of Century/ Greenlam/Tesa/Green ply of approved shade with 1mm thick mica on front side . All the cut portion of board should have 6mm (Six millimetres) thick hard wood edging including jointing fitt and rubbing compete etcetera; including carriage of materials within all leads, lifts and other incidentals and further as per approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof termit resistant commercial board of Kit ply /Centuary ply/Duraply/Marino ply for shelves and shutter all cut portions of the board shall have 6/12mm (Six/Twelve millimetres) thick hard wood edging to be finished with 1mm (One millimetres) thick lamination of Century/Green/Greenlam/Tesaply and approved shade with butt joints and fixing nails and screws etcetera; upto all floor level complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (Twennty five millimetres) thick water proof commercial board in SDB shutter of Kitply/Centuary ply/Duraply including all cut portions of the board shall have 6/12mm (Six/Twelve millimetres) thick hard wood edging and PGI sheet linning in sdie of approved shade in matt finish including fixing with nickel plated piano hinges with screws etc upto all floor levels complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five milimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) upto all floor levels including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium anodised powder coated Grill 8mm (Eight millimetres) thick pattern to existing window/ventilatior with 80mmx80mm (Eighty millimetres into eighty millimetres) panels with 25x8mm (Twenty five millimetres into eight millimetres) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size chromium plated sliding door bolts with necessary screws etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated Tower bolts (Barrel type) with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten millimetres) nominal size

150x10mm (One hundred fifty into Ten millimetres) nominal size

Providing and fixing chromium plated handles with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetres) nominal size

100mm (One hundred millimetres) nominal size

Providing and fixing 250mm (Two hundred fifty milimetres) size chromium plated hooks and eyes with necessary screws etcetera; complete within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 40mm (Forty millimetres) thick cement concrete flooring of cement concrete 1:2:4 (One cement : Two sand: Four graded crushed stone aggregate 20mm (twenty millimetres) nominal size laid in one layer finished with floating coat of neat cement upto all floor level including carriage of material within all leads, lifts of material and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing nd laying 25mm (Twenty five millimetres) thick Kota Stone 55x55cms (Fifty five into fifty five centimetres) size of uniform colour with 7.5cm (Seven point five centimetres) wide Jaislmer yellow brand of looring (Mirror polished) of approved shade/white marble over base of flooring 20mm (Twenty millimetres) (Average) thickness cement mortar 1:4 (One cement : Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing/moulding an noising complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing automatic vibro hydraulic compressed and polished 300x300x25mm (Three hundred by three hundred by twenty five millimetres) polished terrazzo tiles of ISI marked No-1237, top layer in 50% (Fifty percent) white, 50% (Fifty percent) grey cement in white, maroon, yellow & dark green shade. The size of chips shall be O,B,2B No. SG-4038 of NTC in floor on a bed of 25mm (Twenty five millimeters) thickness of cement mortar 1:6 (One cement : Six sand) jointed with neat cement slurry mixed with pigment to match the shade and colour of tiles (wherever required) including rubbing and polishing upto all floors levels complete including entire carriage of material as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying ceramic tiles 5.5 mm (Five point five millimetres) thick antiskid of Somany/Rak/Nitco/kazaria as per approved shade in flooring 300x300mm (Three hundred into Three hundred milimetres) size in flooring laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : three sand) finished with flush pointing in white cement upto all floor levels complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimetres) thick acid resistant vitrified tiles of Johnson/Somany/ Kajaria/Bell/Simpola/Nitco of size 600x600mm (Six hundred into Six hundred millimeters) specified shade in floors laid on a bed of 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement isto Three sand) finished with flush pointing in white cement cement mixed with pigment to match the shade of tiles complete including entire carriage as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Precast terrazzo tiles hydraulic compressed 25mm (Twenty five millimetres) thick (with marble chips of ISI marked No-1237 50% (Fifty percent white) and 50% (fifty percent grey) cement in white, yellow, green and marroon chips of and B size No (SG-403B) of Nitco as per approved shade in skirting upto all height on 10mm (Ten millimetres) thick cement plaster 1:3 (One cement : Three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of any shades/colours complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2mm (Two milimetres) thick heavy duty antistatic vinyl flooring of L.G./VISTA/WONDER FLOOR/ACTION TESA, plain or coloured carved or mosaic/metalled finish laid with aproved adhesive on sub floor (Damp Proofing treatment to be paid for separately) including carrige of materials within all leads, lifts and other incidentals and further as per specifications approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 19mm (Nineteen millimetres) thick green marble table rubbed and polished in base of flooring and top of wall 20mm (Twenty millimetres) thick in cement mortar 1:3 (One cement : three sand) including jointing with cement mortar 1:2 (One white cement : Two marble dust sand) with an admixture of pigment to match the shade of marble including sand round noising moulding and jonting complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying kota stone slab 25mm (Twenty five millimetres) thick in risers of steps of single size, dado of Jaislmer of yellow brand as per detail drawing design laid on 12mm (Twelve millimetres) (Average) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing and moulding doublr or single complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimetres0 granite stone (In combination of Cheema Pink and Black) in flooring with semi round nosing moulding double or single moulding laid on 20mm (Twenty millimetres) (average) thick base of cement mortar 1:3 (One cement: Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete incluing carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x450mm (Three hundred into Four hundred fifty millimetres) ceramic glazed tiles of Kajaria/NITCO/Rak/Johnson in walls or skirting and dado upto all heights with 12mm (Twelve milimetres) thick cement mortar 1:3(One cement :Three sand) jointing with cement slurry complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 60mm (Sixty millimetres) thick precast paver blocks ISI marked of NTC IS No 15658 with vibro compacted upto M-50 (M-Fifteen) grade including border or kurb block grey or coloured laid over sub-base of concrete with 25mm (Twenty five millimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 600x600x10mm (Six hundred into Six hundred into Ten millimetres) nominal size Double charged vetrified tiles Nitco/Rak Kajaria/Johnson manufactured of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage within all leads, lifts and other incidentals and further as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 600x600x10mm (Six hundred into Six hundred into Ten millimetres) nominal size full body matt finished vetrified tiles Nitco/ Rak Kajaria/Johnson manufactured of approved shade and colour in flooring, treads of steps and landing laid on bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage within all leads, lifts and other incidentals and further as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero millimetres) thick prepainted steel sheet of TATA Durashine/Sail/Jindal ISI marked-2-1201 in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Sixty milimetres) thick prepainted steel sheet TATA Durashine/Sail/Jindal ridges (Factory made) shall be having proper Gola/Shape of steel sheet Tata/ Sakti with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valleys 90 cm (Ninety centimetres) over all over all with 0.60mm (Zero decimal Sixty milimetres) thick prepainted sheet TATA Durashine/Sail/Jindal in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester organic coating of 20 (Twenty)microns primer coating back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirt centimeters) wide 90cm (Ninety centimeters) over all semi-circular 0.63mm (Zero decimal sixty three millimetres) thick of TATA plain G.I. sheet gutter with iron brackets 40x3mm (Forty into Three millimetres) size shall be provided with dome shade grating including bolts, nuts and washers etcetera and making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge complete. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. (mild steel) B.P. sheet 2mm (Two millimetres) thick fixed in eaves board/ceiling/cutting soffits/ceiling including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millmetres) dia pipes on wall face P.V.C (D-Plast) rain water pipes of 6 Kgs ( Six kilogram) ISI make of Finolex/Relpipe/Victous of working pressure not less than 4.5 kg/sqmm (Four point five kilograms per sqaure millimetres) high density pipe including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. (D-plast) acessories for rain water pipes 6 kgs/sqm (Six kilograms per square millimetres) as per IS mark of Phenolex Relpipe (Reliance) victus working pressure class-B un plastisized PVC D-Plast high denesity pipe confiming to ISI Code 4545:2004 for rain water pipe fixed with approved adhesive including filling the joints complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimtres)diameteres PVC Plain bend

150mm (One hundred fifty milimtres)diameteres PVC Plain shoe

Providing and fixing 150mm (One hundred fifty milimtres) nominal bore/diametres PVC Clamps of Supreme/Kisan of approved shade with steel screws and rawl plugs etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing flushing 38cm (Thirty eight centimetres) overall in plain G.I. sheet of TATA fixed galvanised iron. J or L hooks, bolts and nuts, G.I. limpet washer and bitumen washers complete bent to shape and fixed in walls with cement mortar 1:3 (One cement : Three sand) 1.25mm (One decimal Two Five millimetres) thick sheet upto all floor levels as per specifications, approved drawing, design and as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections/tubler/single section of TATA/SAIL in trusses and framed work or grills,grating including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins beams, joists, channels, angles, tees flat with connecting plates or angle cleats as in main and cross beams, hips, jack rafters, purlins connect to common rafters and the like including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium work/ powder coated / colour coated in any colour for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron frames manufactured from M.S. Angle iron section 25x25x5mm (Twenty five into Twenty five into Five millimetres) thickness including hinges jamb,lock jamb,beed and if required angle threshold of mild steel angle 25x25mm (Twenty five into Twenty five millimetres) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five millimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete in all respect as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium work/powder coated /colour coated in any colour for shutters of doors windows & ventilators shutters of Jindal/Hindlco aluminium extrusion including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodised transparent or dyed to required shade according to IS:1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws all complete for shutters Jindal shall be used as per specifications, approved drawing, design as per entire satisfaction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to existing door frames 30mm(Thirty millimetres) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19mmx19mm (Nineteen into nineteen millimetrs) for styles and 15mmx15mm (Fifteen into Fifteen millimetrs) for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame overed with 5mm (Five millimetres) thick heat moulded PVC "C" channel of size 30mm (Thirty millimetres) thickness, 70mm (Seventy millimetres)width out of which 50mm(Fifty millimetres)shall be flat and 20mm(Twenty millimetres)shall be tappred in 45 (Forty five) degree angle on either side forming style and 5mm (Five millimetres) thick, 95mm (Ninety five millimetres) wide, PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetres) wide PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetres) thick, 20mm (Twenty millimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (Five millimetres) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into fifty into one decimal ninety millimetres) size with necessary screws etc complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) Glazing (Modi Gaurd/Saint Gobin) with glass panes of 6.00mm (Six millimetres) thickness (weight not less than 13.75 kg/sqm (Thirteen point seventy five kilgrams/square metre) as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing fly wire mesh shutters for aluminium doors, windows and clearstory windows including shutter necessary accessories complete including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel knock down railing of KICH AISI with glass No-D554-2-G-10 hand rail fixed on 10x50mm (Ten into Fifty milimetres) S.S. flats baluster placed at 1200mm (One thousand two hundred milimetres) centre to centre along with 3 Nos. (Three) numbers 10mm (Ten millimetres) at the rate of 16mm (Sixteen milimetres) wide sail connected at the side of baluster with fixture. The balustered would be fixed on the floor with casted base plate of minimum 6mm (Six milimetres) thickness shall be connected with suitable S.S.316 GRADE railing hight to be not less than of 85cm (Eighty five centimetres) from floor as approved drawing, design and specifications level including entire carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing of SST pipe hand railing for ramp with 50mm (Fifty millimetres) diametre SST pipe rail slip resistant with round ended joint at two level at 75cm or 90cm (Seventy five centimetres or Ninety centimetres) height it should extend 30cm (Thirty centimetres) beyond the top and bottom of ramp 25mm diametre SST (solid square bar) baluster welded to 50mm (Fifty millimetres) diametres SST pipe and embeded in cement concrete 60cm centre to centre and as per detail and HP PWD specifications including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and fixing plain glass 5mm (Five millimetres) thick glass panes of Modi Gaurd/Saint Govin/Aashgi for shutter of opening with putty and nails and as per detail and HP PWD specifications including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) with Nerolac/Asian paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces with Nerolac/ Asian paint other than white brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six milimetres) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights in all floor including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles, drip course grooves horizontal or vertical not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) upto floor all levels including drip course/groove complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles drip course grooves horizontal or vertical not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including drip course/groove complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on brick/concrete/stone walls for exterior plastering including arises, internal rounded angles, chamfers or rounded angles drip course grooves horizontal or vertical not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including drip course/groove complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two or more coats) with acrylic washable emulsion paint of Asian Paint/Dulux/ Nerolac and manufacture on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with premium emulsion paint of Dulux/Apex/Asian/Nerolac and manifactured on wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two or more coats) with acrylic oli bound washable distemper with Dulux/Apex/Asian paint brand and manufactire and required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matters and also including preparing the surface even and sand papered smooth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection of 60mm (Sixty millimetres) thick interlocking cement concrete paver blocks with 23cm (Twenty three centimetres) diametres half round stone ware pipe for drainage purpose including laid over cement concrete bedding 1:3:6 (One cement : Three sand : Six graded crushed stone aggregate 40mm (Forty milimetres) nominal size for pipe fitting complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetres) thick everest fiber cement bounded ceiling fixed with powder coated T-Grid system incluing jointing and filling complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall paiting (Two coats) apex weather proof exterior grade emulsion paint of asian paint/exterior of Nerolac Suraksha and manufacture (Apexultima) on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing unistone 12mm (Twelve millimetres) nominal size cladding of suitable colour on wall surface on 12mm (Twelve millimetres) thick cement plaster 1: 3 (One cement : Three sand) and jointed with cement slurry including scaffolding etc. complete.complete including entire carriage of material within all leads, lifts and all floors other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetres) thick frosted glass panes for toilets fixing and jointing complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetres) thick Acoustical panels with colour of approved shade of size 600x1200mm (Six hundred millimetres into One thousand two hundred millimetres) dexune acoustical/Himalyan Acoustical/Everest Acoustical pannel to be installed on G.I/aluminium grid system as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Four milimetres) thick 595x595mm (Five hundred ninety five into Five hundred ninety five millimetres) size design board of Everest board E board ceiling pannel of prepaintes G.I. sheet flooring 600mm (Six hundred millimetres) centre to centre with screws and clamps etc complete (frame work for base & cover fillets to be measured and paid for separately) as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of filled up with polysterence back or rod base members, self aligning / centering arrangement and support . The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight with polysterence back or rod surfaces mechanically snap locking the multicellular to facilitate movement as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100mm diametres P.V.C. pipe extending through the full width of the structure with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specifications Clause 614, 709, 1204.3.7 and as per the instructions of Engineer-in-charge within all leads, lifts of materials and other incidentals.

Back filling behind abutment, wing wall and return wall complete as per drawing & Technical Specification Clause-1204.3.8 Granular material as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetres) dia SST steel pipe of Grab bar at 78cm to 85cm (seventy eight to Eighty five centimetres) height with M.S. plate as per detail and position of W.C. complete for disability person etcetera including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Labrador (Rainbow Series) of NTC size of 300x300x25mm (Three hundred into three hundred into twenty five millimetres) average thickness laid over 12mm (TWelve millimetres) thick base of cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing finish complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying upto all floor level reinforcement concrete work of grade M-25 (M-Twenty five) mix design to obtain the minimum crushing strength of 25N/mm square with cement contents not less than 350 kg (Three hundred fifty kilograms) mechanically mixed and vibrated including curing complete but excluding the cost of reinforcement as in walls any thickness but not less than 0.10 mtrs (Zero decimal One Zero metres) thickness, including attached buttresses, pilaster and their caps and bases and string courses etc; as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe Kitec /Kisan U.V. stabilized with carbon black Conforming to IS-15450-2004 for water supply including clamp at 1m (One metre) spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (16mm (Sixteen millimetres) Outer diameters pipe

1620 (20mm (Twenty millimetres) Outer diameters pipe

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc; including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (One thousand two hundred sixteen) 16mm (Sixteen millimetres) Equal Tee of Kitec/Kisan

1620 (One thousand six hundred twenty) 20mm (Twenty millimetres) Equal Tee Kitec/Kisan

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) thread Female Elbows of Kitec /Kisan

1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) thread Female Elbow of Kitec/Kisan

1216 x 1216 x 15 mm (One thousand two hundred sixteen into One thousand two hundred sixteen into fifteen millimetres) thread Female Branch tee of Kitec/Kisan

1620 x 1620 x 20 mm (One thousand six hundred twenty into One thousand six hundred twenty into twenty millimetres) thread Female Branch tee of Kitec/Kisan

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) female thread connector of Kitec /Kisan

1216mm (One thousand two hundred sixteen millimetres) Coupler

1620mm thread (One thousand six hundred twenty millimetres) Coupler

Female thread socket in floowing blocks of Kitec /Kisan

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) thread male connector of Kitec /Kisan

1620 x 15mm (One thousand six hundred twenty into fifteen millimetres) thread male connector of Kitec /Kisan

Providing and fixing flush pipe for urinal spreaders with necessary fiting complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and including making good the wall, ceiling and floorcomplete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and laying 20mm (Twenty milimetres) nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately)complete including fixing with approved adhesive etc; complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PVC door bend Supreme/Kisan/astral with oval access door, insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc; complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

150mm (One hundred fifty milimetres) nominal bore

110mm (One hundred ten milimetres) nominal bore

Providing and fixing PVC single equal branch plain with oval access door ISI marked with insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

150mm (One hundred fifty milimetres) nominal bore

110mm (One hundred ten milimetres) size

Providing and fixing P.V.C. Supreme/ Kisan Collar ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimetres) nominal bore/diametre

110mm (One hundred ten milimetres) size

Providing and fixing P.V.C. Supreme/ Kisan plain bend including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty milimetres) nominal bore/diametre

110mm (One hundred ten milimetres) size

Providing and fixing 150mm (One hundred fifty milimetres) nominal bore/diametre PVC plain double equal branch including fixing with approved adhesive etc; complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) dia C.P. Cap brass accessories incluing neccessay fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing G.I. Nipple incluing neccessay fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) nominal bore/diametres

20mm (Fifteen millimetres) nominal bore/diametres

Providing and fixing 20mm (Fifteen millimetres) nominal bore/diametres G.I. elbow incluing neccessay fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty millimetres to Forty millimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in trenches P.V.C. pipe of Supreme/ Kishan/Finolex/Relpipeincluding pressure 6Kg/mm(Six kilogram per millimetres) spigot socket waste ventilatiing pipe including fixing with adhesive mixure complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres (2.7 mm (Two point seven millimetres) thick pipe

110 (One hundred ten millimetres) nominal bore/diametres (2.2mm (Two point two millimetres) thick pipe

Providing and fixing P.V.C. holder bat clamps including steel bolts to PVC pipes embedded in and including cement concrete blocks 100x100x100mm (One hundred inti One hundred into One hundred millimetres) dia of 1:2:4 mix (One cement : Two sand : Four graded stone aggregate 20mm (Twenty millimertes) nominal size including cost of cutting holder and making good the walls complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing P.V.C. Supreme/ Kisan heal rest ISI marked including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing P.V.C. Supreme/Kisan cowl ISI marked including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing 110x90mm (One hundred ten into nineteen millimetres) nominal size/diameter P.V.C. floor trap Supreme/ Kisan ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Orissa pan-20090 of Hindware/Cera/Jaquar of star white/Snow white shade with size 53x41cm (Fifty three into forty one centimetres) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing EWC vitreous china of Star No-20087 (S-10) of size 57x35x39cm (Fifty seven into Thirty five into Thirty nine centimetres) fixed to PVC cistren (Sleek plug) fixed to jet pressure of Hindware/Cera/Jaquar of star white/Snow white shade including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing EWC matrix fixed with jet pressure of Hindware/Cera/Jaquar of star white/Snow white shade fixed to PVC cistren (Sleek plus) of star white/snow white fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten litres) capacity PVC low level dual flushing cistern ISI marked as Cera/Jaguar/Hindware with a pair of C.I. or M.S. brackets with fittings such as lead valve less siphon, 15mm (Fifteen milimetres) nominal size brass ball valve with polythene float, C.P. brass handles, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty milimetres) diametres C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) within all leads, lifts of materials and other incidentals

Providing and fixing 100mm (One hundred millimetres) nominal bore sand cast iron P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement : One sand) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in 32mm (Thirty two milimetres) nominal bore/diameters nternal diameters galvanized steel tubes flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated (Heavy duty makes) ISI marked brass soap dish with C.P. brass brackets fixed to cleats with C.P. brass screws including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat solid type and cover for wash down water closet with C.P. brass hinges and rubber buffers matching with shade of European W.C. pan including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china urinal including connection the urinal snow whie shade with waste pipe by means of white lead mixed with chopped hemp large flat back No-6002 Hindware/Cera/Jaquar of star white/Snow white shadetype Snow white shade of size 39x37.5x59cm (Thirty nine into Thirty seven point five into Fifty Nine ccentimetres) including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin gariet No-10080 Cera / Hindware Jaguar/Snow white/star white shde 58x43cm (Fifty eight into forty three centimetres) under counter basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same with pedestal but excluding fittings including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 610x510mm (Six hundred ten into Five hundred ten millimetres) depth of 200mm (Tweo hundred millimetres) stainless steel kitchen sink with drain of AMC/Unik/Diamond with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin delta No-10010 of Cera / Hindware of approved shade having size 55x40cm (Fifty five into forty centimetres) with single hole for pillar tap and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union for wash basin and sink complete in all respect including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres PVC waste pipe for wash basin or sink including check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of ISI marked of Kingston/CPM/Jal/ESS/Jaguarfor gully floor or Nahni trap including entire carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetres) beveled edge mirror of ATUL/MODI of superior glass mounted on 6mm (Six millimetres) thick A.C. sheet or ply wood sheet and fixed to plugs with C.P. brass screws or suitable mechanism and washers fixed on wall at a distance of not less than 20mm including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetres) C.P. brass Towel rail ISI marked Kingston/Gem/Parko/Jaguar complete with C.P. brass brackets fixed to plugs with C.P. brass screws etcetera including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetres) glass shelf with C.P. brass of ISI marked of approved brand (Heavy duty) with brackets and guard rail complete fixed to wooden plugs with C.P. brass fitting with neccessary screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of (Heavy duty make ISI marked of approved brand including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 5 Ltrs (Five litres) net capacity PTMT of Paryag coloured white dual flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (over flow pipe to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated jet pressure of Kingston/Gem/Jaquar including fitting complete including entire carriage of material within all leads lifts and other incidentals and as per specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated PTMT push cock tap of ISI marked of Kingston/Gem/ESS/Jaquar complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated fancy bib tap of ISI marked of Kingston/Cera/ESS/Jaquar complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametre C.P. brass stop cock IS marked of Kingston/Cera/ESS/Jaquar as per specifications including entire carriage of material within all leads lifts and other incidentals and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametres C.P. brass pillar tap with capstan head IS marked of Cera/ESS /Jaquar including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametres brass angle valve without nuts IS marked Cera/ESS/Jaquar as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass full way valve with wheel ISI marked of Cera/ESS/ Jaquar as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) nominal bore/ diametres

20mm (Twenty millimetres) nominal bore/ diametres

Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. brass valve (Horizontal plunger type) high pressure with copper plate as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. SINTEX water storage tank (Tripple layers) having capacity of 1000 (One thousand) liters of ISI 12701 marked with G.I. (Galvanised iron) inlet and outlet connection, 15mm (Fifteen millimetres) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (One Cement : Three Sand : Six graded stone aggregate 40mm (Forty millimetres) nominal size bedding for underground pipes of 150mm (One hundred fifty millimetres) diametres including necessary form work and curing completes as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm (Forty millimetres nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetres) 500mm(Five hundred millimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred ten millimetres) internal dimensions. Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23 Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and fixing cast iron manhole C.I. cover with frame weight not less than 38 Kgs (Thirty eighty kilograms) i.e. weight of cover should be 23 kgs (Twenty Three Kilograms) and weight of frame 15 kgs (Fifteen Kilograms) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetres nominal size) inside plastering 15mm ( Fifteen millimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetres) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetres) internal dimensions. Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PTMT urinal spreader of approved quality and colour complete including entire carriage within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PTMT urinal waste coupling of approved quality and colour complete within all leads, lifts of material and other incidentals, as per specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Ujjawal Singh

Kumar