Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.4 LAccepted-AOC | L1 | Accepted-AOC Due to L1 | |
| 2 | L2₹38.4 L+₹95,107.10 (2.54%)Rejected-Finance | L2 | Rejected-Finance Due to L2 | |
| 3 | L3₹40.7 L+₹3.2 L (8.66%)Rejected-Finance | L3 | Rejected-Finance Due to L3 |
Tender Value
₹43.7 L
EMD Value
₹87,360
Closing Date
10 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Bidar
GE AF Bidar, Naubad road, Bidar, Karnataka 585401
IMPROVEMENT TO KITCHEN OF CERTAIN MD QTRS IN HAWK ENCLAVE ( PHASE II ) AT AFS BIDAR
2022_MES_551322_1
8172/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF Bidar
As per NIT
8 documents required · 8 mandatory
₹500
GE AF Bidar
₹87,360
Yes
17 Dec 2022
12 Sept 2022
11 Oct 2022
12 Sept 2022
10 Oct 2022
26 Sept 2022
60 days
Amount
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified and as directed .
Granite (of any type) 18-20 mm thick, work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar locations complete all as specified and as directed.
Glazed coloured ceramic coloured tiles in vertical surfaces 300 X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
Demolition of brick work, stone / boulder masonry, precast concrete block masonry etc., built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
Brick work with sub class 'B' bricks (old size brick) straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and ascdirected.
Taking down cement plaster on brick or concrete or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.
Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.
Preparation of new surfaces of wall and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed.
Complete removal of existing treatment of walls including cornices pillars etc and applying two coats of Oil Bound Distemper over one coat of alkali resistant primer complete all as specified and as directed.
Preparation of old decorated surfaces of ceilings by washing, rubbing down stopping and applying one coat of white wash complete all as specified and as directed.
GI tubing 15mm dia medium grade with all fittings and fixed to walls and ceiling or laid in floors including taking down old steel tubing complete all as specified and as directed.
S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or liad on floors including necessary clamps complete all as specified and as directed.
S&F in repairs PVC (SWR) bends 75mm dia with access door any radius complete all as specified and directed.
S & F in repairs 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S & F in repairs 75 mm bore, PVC (SWR) vent cowl complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and directed.
S&F in repairs PVC (SWR) gully trap 125mm including setting and jointing with solvent cement etc complete all as specified and directed.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.
Steel windows with side hung shutters including friction / projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
Framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.
Glazing with sheet glass 3 mm thick ordinary quality fixed with oil putty in square n.exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Preparation of new Steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Factory made Second class hardwood glazed and skelton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, clause 8.24(a) and fitted to chowkats, complete all as specified and as directed.
Preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete, all as specified and as directed.
Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.
Aluminum aodised sliding door bolts of 300mm long with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
Butt Hinges medium weight cold rolled mild steel, 100 mm long complete all as specified and as directed.
Mild steel work as in hold fasts and other similar items conforming to Fe-290 Gde-E-165, complete all as specified and as directed.
M&L for 18/19 mm thick Prelaminated particle board exterior grade, both sides prelaminated with decorative choice lamination , fixed with screws to timber frame work for shutters of ward robes, cabinets etc., complete all as specified and as directed.
M&L second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
S&F auto closing hinges for fixing cabinet doors in kitchen cabinet system with self closing mechanism which allows the cabinet door to close smoothly complete all as specified and as directed.
Teak wood lipping 6mm thick fixed with nails to 18/19mm thick board complete all as specified and as directed.
Aluminium anodized handles fabricated type of extruded section of 75mm long complete all as specified and as directed.
Hasp and staple 100mm long, aluminium anodized including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Aluminum anodised barrel tower bolts of extruded section 75mm long complete all as specified and as directed.
S &F in repairs Stainless steel kitchen sink, made of stainless steel 1 mm thick, with plugs, washers, PTMT waste coupling 38/40mm ( half or full threaded) incluing waste pipe 32mm bore with reducer socket, overall size 495mm X 420mm, bowl size 410mm X 330mm X 160mm complete all as specified and as directed.
Grating doom 100mm dia of stainless steel with hole for waste pipe complete all as specified and directed.
Making hole in granite kitchen cooking platform suitable for gas pipe complete all as specified and as directed.
S&F in repairs 12mm thick ply wood, grade BWR type BB fixed with nails to timber frame work complete all as specified and as directed.
Point wiring with 1100 V grade 1.5 Sqmm single core PVC insulated unsheathed cable, copper conductor multistranded passing through and including heavy duty PVC conduit with all accessories, surface type on wall/ roof/ floor with concealed MS box / Surface type PVC box as required at site with 3mm thick laminated top cover duly earthed with 1.5 sqmm multistranded PVC insulated copper conductor cable for one light point /bell point /fan point controlled by one switch complete all as specified and as directed.
All as per item No 45.00 here-in-before but size of cable 2.5 sqmm for 15 Amp switch socket with earth wire 2.5 sqmm PVC insulated multistranded copper conductor cable complete all as specified and as directed.
Switch piano flush, single pole, one way, 5/6 Amp, complete all as specified and as directed.
Ceiling rose surfaces bakelite 63.5 X 28mm three terminals complete all as specified and as directed.
Switch socket combination, 2 in 1, 3 Pin 5 Amps and 15 Amps 240 Volt, flush type universal complete all as specified and as directed.
Sub main wiring complete with 2 runs of 4 sqmm single core PVC insulated unsheathed FRLS cable, 1100 volts grade, multi stranded copper conductor drawn through and including suitable size of PVC conduit pipe and accessories concealed to surface / wall roof etc with one run PVC insulated 4sqmm FRLS cable , copper condutor for earth continuity conductor all as specified and as directed. Note : Three runs of of 4.0 sqmm PVC insulated stranded copper conductor and one run of PVC conduit shall be measured and paid as one unit.
MCB DB SPN 12 way metallic, double door,IP-42 protection 240 V, AC 50Hz with for MCB double pole as incomer and single pole MCB as outgoing with tinned copper bus bar of rated 200 amps neutral earth link complete all as specified and as directed.
MCB SPN 63 Amp 240V 50 Hz, 10 KA, 'C' series including making electrical connection with proper size lugs complete all as specified and as directed.
MCB SP 6- 32 Amp 240V 50 Hz, 10 KA, 'C' series including making electrical connection with proper size lugs complete all as specified and as directed.
S & F 20/22 W LED Surface mounted, batten fixture, 1200mm in length, with powder coated pressure dia cast aluminium housing and translucent diffuser. The fitting should have multichip on board LED metal clad PCB and dedicated heat shrink. The minimum lumens output of the system should not be less than 1450 lumens. The fitting should have surge protection of minimum 2 Kv input current <200mA, THD<10 % and CCT between 5000 k to 6500 K complete all as specified and as directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .