Tender for Electrical maintenance at Olpad RuralDivision office and all sub division of Olpad Rural Division.

Work of Electrical maintenance at Olpad (R) Division office. And all subdivision of Olpad

Particulars Rate. Per.

1 Providing and Fixing of Fan Hook fitting etc. as directed. 182 No

P&F new fan pipe 2 feet long or required length with twin

2 core flexible wire copper wire fitting etc. completed as per 120 No

P&F 16A-32A MCB breaker approved make for lighting &

A.C. 7 computers etc. completed as per inst. Of EIC.

P&F A/C starter 32Amp. 250Volts heavy duty North East,

Gelco or equivalent brand etc. Completed per inst. Of EIC.

P &F LED 4ft. 22 watt Tube light ISI marked of approved

make Crompton/Philips/Havelles with 2 year warranty.

P&F NORTH-WEST (WIPRO), LEGRAND, CRABTREE ,etc. or

6 approved brand electronics Fan regulator 6 position with 624 No

360 rotation ISI marked etc. complete as instruction of EIC

Repairing of exhaust fan with removing from wall fitting

providing & Fixing rewinding coils, replacement of bushes

with other minor repairing etc. completed as per inst. Of

P&F new door call bell incl. removing burnt bell from fitting

etc. completed.

P&F as per describe in item 1 Wall fan 400mm size (like

Crompton/Anchor/Havelles and equivalent to these)

Removing & Repairing single phase motor monoblock incl.

10 winding & rewinding of burnt motor with loading & 2350 No

unloading & fitting etc completed as per inst. Of EIC.

Labour Charges for repairing ceiling fan pedestrain fan, wall

11 fan, repairing with busing, bairing varnish, rewinding of 720 No

motor etc. completed as per inst. of EIC.

P&F of decorative/traditional ceiling fan of

cromton/Havells/Anchor/bajaj,1200 mm size including

copper flexible cord of suitable & approved size from ceiling

rose upto fan terminals & fixing of regulators.

P&F 3 to 5 MFD fan capacitor with fixing the same in ceiling

fan / wall fan etc.

Labour Charges for shifting of wall fan/ceiling fan from one

place to another place of office etc. completed

2.5 Sq mm 3 Cor Cable, CassingCaping under

Computer/Office Table as directed.

P&F 10 W lamp for office quarters etc. ISI marked of

16 approved make chromton/Philips/Havelles with 2 year 125 No

17 P&F 5 amp plug point etc. including labour and material. 360 No

Repairing of Submersible Pump with all accessories incl.

Removing and replacing Pump

P&F New Exhaust fan all necessary wiring including labour

P&F e-urja cat cable fitting etc including labour and

Repairing of electric gizar with winding or other repairing

Providing and fixing of heavy duty exhausted fan 12" of

22 Havells / crompton make with ISI mark only including wiring, 1450 No

earthing to exhausted fan any as per instruction of EIC.

Providing and fixing ellectronic type cordless bell (effective

23 range minium 50 Ft.) other necessary fitting, as per 685 No

instruction of EIC

Providing and fixing of LED ROOF LIGHT 3/6/9/12/15/20

24 Watts of Havells / crompton or equivalent brand make with 220 No

ISI mark only any as per instruction of ELC. (a) 3 watts

25 Do as above (b) 6 watts 340 No

26 Do as above (c) 9 watts 450 No

27 Do as above (d) 12 watts 850 No

28 Do as above(e) 15 watts 1050 No

29 Do as above(e) 20 watts 1500 No

Providing & fixing 63A NORTH-WEST (WIPRO), LEGRAND,

30 CRABTREE, or equivalent brand etc. Four pole RCCB switch 2765 No

Wiring as per describe in item 1 for looped plug on board

with flush shock proof (like NORTH-WEST (WIPRO),

LEGRAND,CRABTREE and equivalent to these) 16A Socket

and Switch of 16A Capacity

Unconcealed wiring point for lights and fans with 1.00 Sq

mm Single core copper conductor as per IS 694 (2010) with

earth wire green (like RR Kable, Havells, Polycab and

equivallent to these) up to 6 meter length with ISO mark

PVC casing and capping 32*12 mm. Including flush shock

proof Modular accessories (like NORTH-WEST (WIPRO),

LRGRAND, CRABTREE and equivallent to these) mounted in

PVC box 3mm thick with

PVC/Hydro/PC(Polycarbonated)/Acrylic/Laminated/Bakelite

33 P&F 5 amp plug point etc. Including labour and material. 360 No

A.C Point looped plug on board with flush shock proof

NORTHWEST (WIPRO), LEGRAND, CRABTREE, or equivalent

brand etc. or approved brand 25A plug socket / Ac starter

and switch of 25A capacity

Providing & fixing 10A to 25A NORTH-WEST (WIPRO),

35 LEGRAND, CRABTREE or equivalent brand, etc. Single pole 175 No

MCB switch ISI mark etc.

Providing & fixing two Pole MCB of 10A to 32A (like NORTH-

36 WEST (WIPRO), LEGRAND, CRABTREE and equivalent to 685 No

Providing & fixing four Pole MCB of 40A with metal box (like

37 NORTH-WEST (WIPRO), LEGRAND, CRABTREE and 1884 No

equivalent to these)

Providing & fixing 63A NORTH-WEST (WIPRO), LEGRAND,

38 CRABTREE or equivalent brand, etc. Four pole MCB switch 1050 No

Providing & laying of Main Line meter to MCB Distribution

39 Box 4.00 Sq mm. Copper wire (4.00 Sq mm size 4 Nos.) (like 359 Mtr.

RR Kable, Havells, Polycab and equivallent to these)

Copper Plate Earthing size of 600mm*600mm with a

thickness of 3mm. This shall be installed in a pit of Size

900mm*900mm*1050mm (Ibh) and Chemical Earthing Bag

25Kg Copper patti 25*3mm with length 5 feet and copper

wire 18 sq mm up to 3 meters.

Flood Light Supplying & erecting Wall washer type flood

light. The housing of the luminaire shoud be made from

pressure diacastaluminium, with epoxy-polyster powder

coating, aerodynamik design with ergonomic shape. The

lamp and gaer compartment should be intregrated together

to make fast access to lamp & control gear. The reflector

should be high quality anodized aluminium type, parabolic

41 type for narrow rotationaly symmetric beam, for high 6500 No

lighting architectural lighting application. Suitable for one

no of 70 W CDM-T lamp. And with choke, capacitor, holder,

etc., complete with Lamp. As per detail Specification and

drawing. Sample to be approved by consultant architect.

The model should be philips make flood light uniflood

RVP339 or other aproved brand having similar look as well

as Technical data. Basic Rate: 4000/

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmored

42 copper cable 1.1 KV grade to be erected as directed of 80 Mtr.

following size.(B) 3 core 2.5 Sq. mm

Providing & Fixing new LED street light 36 watt ISI marked of

43 approved make Crompton/Havelles/Philips with 2 years 2372 No

Providing & Fixing street light timer with contactor 32 Amp

44 ISI marked of approved make Havelles/L&T with warranty 2 2200 No

Providing & Fixing 24 ftuppar Dome Light 90 watt ISI marked

of approved make Chrompton/Philips/Havelles

Removing & repairing single/three phase motor monoblock

46 incl. winding & rewinding of burnt motor with loading & 2500 No

unloading & fitting etc. completed as per inst. of EIC

Providing and fixing Single phase monoblock 1 HP 1400 Rpm

47 motor pump with starter of approved make ISI marked 12500 No

Chrompton/CRI/Falcon with 2 years warranty

Providing and fixing Three phase monoblock 1 HP Rpm

48 motor pump with starter of approved make ISI marked 13000 No

Chrompton/CRI/Falcon with 2 years warranty.

Providing and fixing Single phase Submersible 2 HP motor

49 pump with starter of approved make ISI marked 21700 NO

Chrompton/CRI/Falcon with 2 years warranty.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand/Solid Copper conductor for 1.1 KV. To be

50 laid on wall with necessary clamps or in existing trench/pipe 539 MTR

at road crossing or floor of following size of cable (B) 4 core

Providing and Fixing automatic water controller starter 6 to

51 18 Amp having ISI mark of any make including labour and 4200 Mtr

52 Carbon Sensor Set (6 Set) 1200 Set

53 Copper Strip 3.00 mm thick Rolled for Earthing 790 Mtr.

54 Copper 4 Core 50 Sq mm Cable 1841.25 Mtr.

55 63/100 Amp Copper Busbar (3-Phase neutral) 4399 Nos

200A Triple Pole Metal Clade SFU 415/500 V with HRS Fuse

(Suitable load and natural link)

Industrial type wall fan/Pedestal fan 400/600 mm 230volt

make (Crompton/Almonad/Usha)

58 100A MCCB FP 8066.78 Nos

59 P&F of 63A FP ELCB 8057 Nos

P &F LED 4ft. 40 watt Tube light ISI marked of approved

make Crompton/Philips/Havelles with 2 year warranty.

61 200A MCCB FP 16500 Nos

62 24 Way DB Box 5600 Nos.

P&F of decorative/traditional BLDC with Remote

Controlceiling fan of Crompton/Havelles/Anchor/bajaj,

63 mm size including copper flexible cord of suitable & 4150 Nos.

approved size from ceiling rose upto fan terminals & fixing

64 16sq mm 4core copper cable 1450 Mtr.

100mm * 50mm Cable Tray with Cover with Powder Coating

200mm * 50mm Cable Tray with Cover with Powder Coating

300mm * 50mm Cable Tray with Cover with Powder Coating

68 Decorative Wall Light 5000 Nos.

Providing and fixing of Panasonic/siska/Wipro/Crompton or

69 Equillent Brand 36 to 50 watt panel light 2 feet*2 feet LED 2850 Nos

70 Miscellaneous Work - (Market

71 P&F Gelco make 100 AMP ELCB/ELR 19000 Nos

72 P&F Gelco make 125 AMP ELCB/ELR 23500 Nos

73 P&F Gelco make 160 AMP ELCB/ELR 29500 (Market

74 P&F Aeco Make 2*2 Cealing Fan 6450 (Market

75 160 AMP ATS Switch ISI Make 56000 (Market

76 125 AMP ATS Switch ISI Make 40000 (Market

In Words: - Thirty Lakh Rupees Only

% Above/Below of Estimate Rate

Stamp/Sign of Contractor

The rates of mentioned items are inclusive of labour charges for replacement and exclusive

Executive Engineer (O&M),

DGVCL, Olpad ® Division, Surat

1). Evaluation of the tender will be done on lowest offered rate.

2). I/We agree to supply the articles noted above at the rates herein tendered by me/us

subjected to the condition of tender and supply of the tender inquiry which I/We have

carefully read and which I/We thoroughly understood and to which I/We agree.

3). I/We here by agree to keep this offer open for 180 days after the date of opening of

technical bids of the tender and shall be bound by Communication of acceptance dispatch

within the prescribed time.

4).if in any Bidders company/firm, the interest (i.e. Shareholding in company and share in

partnership firm) of any employee of the tendering company or his/her relative as defined

in section 2(77) of the company’s Act.2013 is 10% or more, the tendering company will

not deal with such company /firms at all.

Tender therefore, must specifically disclosed this fact in his technical Bid. Non-disclosure of

such facts would immediately disqualify the tenderer for further dealing with the tendering