Poovappuzha Lift Irrigation Project At Eraviperoor Grama Panchayath in Aranmula constituency

Supply,Fabrication and errection of DI pipe, Flange etc. Mechanical work

OD4139/2025-2026:Supply of 300 mm dia Ductile Iron class K-9 pipe of min. 6.35 mm thick for suction and delivery side

OD4137/2025-2026:Supply of DI Flange of OD 445 mm for 300 mm DI pipe

OD4145/2025-2026:Supplying 45 degree 300mm dia DI bend with ISI Specification including all cost of material, conveyance etc. complete

OD4151/2025-2026:Supply of 90 degree 300mm dia DI bend with ISI specification including all cost of material, conveyance etc. complete

OD4155/2025-2026:Fabrication of DI eccentric reducer for 300mm to suitable size including cost of material, conveyance etc .complete

OD4157/2025-2026:Supply of MS concentric enlarger for size 300mm to suitable size including cost of all material, conveyance etc. complete

OD4625/2025-2026:Supply of 300mm dia C.I Non Return Valve of good quality including all cost of conveyance, materials etc. complete

OD4159/2025-2026:Fixing the 300 mm C.I Non Return Valve to 300 mm DI pipe

18.31.6.2:Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 300 mm diameterClass II

OD4160/2025-2026:Supply of Bolts and Nuts of various sizes

OD4162/2025-2026:Supply of 5T chain block with pulley including cost of conveyance, labour charges etc. complete

OD4163/2025-2026:Supplying Water tank of 80 ltr. capacity etc. complete

OD4172/2025-2026:Erection of 5HP vacuum pump and Supply and providing PVC fittings including elbows, couplings, reducers, brass nipples, tank connector etc. for vacuum pump connections to the pump

OD4164/2025-2026:Supply of Rubber Insertion sheet to prevent the leakage through the joints in between two flanges and cutting to size, drilling and fitting in correct position etc. including cost of material, labour charges etc. complete

OD4165/2025-2026:Conveyance of Pump assembly and pipes from road side to work site

OD4166/2025-2026:Erecting the 30 HP pump and motor on the foundation basement in proper alignment including the cost of all labour etc. complete as per the direction of officers at site

OD4167/2025-2026:Cutting holes in the existing Pump House building to facilitate easy passage of suction and delivery pipes

OD4169/2025-2026:Erection of 300 mm DI pipes including specials and fittings after conveying them within initial lead and carefully placing in alignment and levelling ,welding flanges in correct alignment after necessary cutting ,grinding, edge preparation etc.

OD32459/2025-2026: Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD40194/2025-2026:Supply of Banyan waste

OD32468/2025-2026: Supply of MS round bar including cost of conveyance charges

OD32462/2025-2026:Fabrication of sufficient support for suction and delivery pipe

OD4170/2025-2026:Supplying and fixing strainer of suitable size to the bottom of the suction side DI pipe line to protect from entry of weed and other materials in to the pipe line, including cost of material conveyance etc. complete

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

4.1.11:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

OD4171/2025-2026:Conducting trial run of the 30 HP pump and vacuum pump