KMSCL - Electrification and Maintenance of District Drug ware house, Kanhangad, Kasargod District

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with No.14 SWG bare copper , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.

Single control light point with 6A, 3 plate ceiling rose

Single control light point without ceiling rose

Single control ceiling fan point with 6A, 3 plate ceiling rose & with socket size stepped electronic regulator

Combined plug point with 6A, 5 pin plug socket controlled by 6A switcvh in the same switch board as that of light points

Independent plug

Call bell point with piano type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end including supply and fixing the buzzer types superior quality 250V AC call bell on existing MS box and giving connections

Supply, conveyance , installation , testing and commissioning of pre-wired LED light fittings 60x 60 cms squre with all accessories and36 W LED lamps etc. suspended from ceiling using 2 nos steel chain of length not exceeding 30cm properly hooked to steel hooks anchored to the ceiling and giving connections with required length of 16/0.20mm 3 core copper condutor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required with frame for LED 60 x60 cms

Supplying and providing extra steel chain (16 SWG) 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc. as required.

LED down light fitting 3 D tiltable light fittings 7 W (Dewton) complete

Supply, conveyance installation testing and commissioning of pre-wired light fittings made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVCround block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required. 16W LED light fittings

Supply and fixing wall light fittings (Comet model No: 30675/31/86 Philips) with 9W LED and giving connections etc as required

Supply & Installation of out door light fittings on buildings 1x 16W LED Street Light fittings etc.

Supply, fabrication, conveyance and fixing the 40mm dia with clamps made from 20x 3mm MS sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories in recess including cutting the wall and making good the damages etc as required.

20mm dia light guage

25mm dia light guage

32mm dia light guage

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

20mm dia light guage

25mm dia light guage

32mm dia light guage

Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. 1200 mm sweep - 5 star rated

Supply and providing every additional length of dowen rod of suitable size of heavy guage GI/WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire confirming in relevant ISS or with original wiring extended including painting as required

Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, colour washing etc. as required.

Supply and fixing 300/ 305 mm, single phase light duty exhaust fan in metal frame

Charges for cutting holes suitable for accommodating exhaust fans of sizes exceeding 305 mm sweep up to 450 mm including plastering, colour washing etc. as required.

380 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame

Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, colour washing etc. as required.

200 mm, single phase, light duty exhaust fan in plastic body with self opening louvers

Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, colour washing etc. as required.

305 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame

Charges for cutting holes suitable for accommodating exhaust fans of sizes exceeding 305 mm sweep up to 450 mm including plastering, colour washing etc. as required.

450 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 2 run

1.50 sq mm 4 run

2.50 sq.mm 2 run

2.50 sq.mm 4 run

2.50 sq mm 6 run

2.50 sq mm 8 run

4.00 sq.mm 2 run

4.00 sq.mm 4 run

6.00 sq.mm 4 run

10.00 sq.mm 4 run

Supply and fixing the following types / sizes of boxes suitable for modular accessories in surface / recess including making good the damages, colour washing etc., as required (ROHS)

1 module metal box in recess

2 module metal box in recess

3 module metal box in recess

12 module metal box in recess

Supplying and fixing the following types / sizes of front plates on the existing modular boxes (ROHS)

1 module white / off-white

2 module white/ off-white

3 module white / off-white

12 module white/ off-white

Supplying and fixing the following modular switch and accessories in the existing front plate and giving necessary connections as required. (Group B)

6 A SP 1 way switch

16 A SP 1 way switch

6 A 3 pin shuttered socket

6/16 A socket

25/20 A Motor socket switch

25/20 A Socket

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

6 way (8+18) - three phase double cover (IP 42/43)

4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

40 A four pole mini break isolator

63 A four pole mini break isolator

40 A, 10 kA, TP MCB

63 A, 10 kA, TP MCB

40 A 4 pole 30 m A RCCB

63 A 4 pole 100 mA RCCB

125A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply and fixng 6A to 32A, 10KA SP MCB etc as required 6-32A

Supplying and drawing bare earthing conductors of the following sizes along with wiring cable and giving connections as required.

2.00 mm copper conductor (14 SWG)

2.65mm copper conductor (12 SWG)

3.15 mm copper conductor (10 SWG)

Supply of superior quality copper earth socket for the following sizes of earth conductor including criping etc., as required

2.00 mm (14 SWG)

2.65mm (12 SWG)

3.15 mm (10 SWG)

Supply and providing the 25 x 3mm brass bolt and nut with washers on the existing MS Box / earth bus etc, as required including drilling necessary holes as required

-do- -do- 25 x 6 mm -do- -do-

Supply and providing plate earthing as per IS 3043 with 1200x1200x12 mm GI/CI earth plate, 50 mm GI watering pipe fixed to the earth plate with 25 x 3mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 450 x 450 x 450 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil)

Supply and providing the 450x450x10mm cast iron gully trap with covering at the top of the inspection chamber of earth pit as required

Supply and providing test joint for the earthing system using 2 Nos of the 2x32x3mm tinned copper strip sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watring pipe etc. as required.

Supply and providing earth lead from the test joint to the earth electrode using the 32 x 3 mm copper strip tinned at the point of contacts of conductors / strips including cutting drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc., as required

Supplying, threading, laying and jointing of the 50mm dia of ‘B’ class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads/ cables.

125A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Rotary kit up to 250A

Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.

Painting letters or figures of 2.50 cm, 4 cm or 5 cm height with enamel paint as identification mark to SB, DB, panel board etc as required

DEEPESH P

Bidder Name

DEEPESH P

Power Care Electrical