Project No.198/2021 Providing electrification in the renovated Annex building in Corporation Thiruvananthapuram - Office fitout for State Audit and Statistics Department etc

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B) modular accessocies)

90.2.1.1. Single control light point with 6A, 3 plate ceiling rose

90.2.1.3. Single control light point with out ceiling rose

90.2.1.4. Single Control ceiling fan point with 6A.3 plate ceiling rose and with socket typped electronic regulator.

90.3.20.3.Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required. 1200 mm 2X20W LED Lamp with box type fixture

Supply conveyance, installation, testing and commissioning (Havells/Philips/Bajaj) make recessed mounted, copmact vertical, round shaped down lighter with removable driver suitable for low ceiling lights 15W LED 4000K(white)

90.4.1. Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

90.4.5.2 Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

120mm sweep (category B) 5 star rated

Supply and fixing angle/straight brass lined skirt type, bakelite batten holder without shade and giving connection etc as required with 10 W LED bulb

200 mm sweep light duty exhaust fan in plastic body with self opening lowers working on 230 V single phase A/C supply

1.27.5. Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 module (125 x 125 mm)

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 socket outlet.

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amp switch.

1.32. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

90.6.4.12 Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.6.4.12 1.50 sq mm 2 run

90.6.4.13 1.50 sq mm 3 run

90.6.4.14 1.50 sq mm 4 run

90.6.4.16 1.50 sq mm 6 run

90.6.4.22 2.50 sq mm 2 run

90.6.4.34 4.00 sq mm 4 run

90.6.4.44 6.00 sq mm 4 run

90.9.2.1 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.

100 x 50 mm CMS with base and lid

90.9.2.2 cable divider

90.9.2.3 External Angle

90.9.1.24 Flat angle

90.9.2.7 Flat Cross

RJ11 Telephone jack with shutter

1.24.6 Telephone socket outlet

1.23.6 Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required. Telephone socket outlet

9.11.1.19. Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. 6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

9.11.1.11. Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. 6 way (8+18 - three phase double cover (IP 42/43)

2.13.1.. Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.3.4. Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 16 way Double door)

2.13.2.. Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

2.15.2. Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. RCCB 300 mA 40A

2.12.1 Supplying and fixing following rating, double pole, 240 isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

2.10.2 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

NET working

MULTIMODE FIBER O.F. Cable 06F O outdoor Armoured Unitube MM (50/125 mm) OM3-HDPE sheath.

LIU fully Loaded LIU 12 port rack mount- Loaded (LC) MM

PIGTAIL LCMM (50 UM) OM3 SIMPLEX length- 1 m

PATCH CORD LC-LC MM (50) OM3 duplux length- 1 m

10 G switches 24 port 10/100/1000 Mbps+4 10G ports smart pro Switch for 5 th floor

MODULES 10 G Base- SR Multi-Modu, OMI 33M/OM2 82 M/OM3 : 300M, SDF+850nm)

9U rack wall mount 9U x 550 W 450 D , frond glass door (tinted, toughened) with lock & key, 2 pairs of 19 mounting rails with U-making welded side walls with metal engraved D-link logo standard accessories : 1U cable manager (1), Hardware Packet (1Pkt) 6 socjet 5 amp, power distribution Unit (1 No) Roof mounted fan unit/90 CFM/230V AC (1No.)

Cat 6 UTP cable 23 AWG solid 305 M

Face plate- single (keysone Jack, square)

Jack cat 6 keystone UTP - White

Back box for single, Dual (cat5e/cat6/Cat6A,square)

Cat 6 UTP 24 AWG patch cord: 1 M, Plug 30U Snagless

Cat 6 UTP 24 AWG patch cord: 2 M, Plug 30U Snagless

Patch panel cat 6 UTP Keystone type-24 port-fully loaded

PVC pipe and casing cap

Hdp laying

Pick Tail Termination

Liu fixing

Net work Configuration and termination