PROVISION OF SPORTS STORE, SPECIAL REPAIRS TO BUILDING NO 51J IN PHASE II RESIDENTIAL AREA AND VICTUALING STORE AT NAVAL STATION BHEEMUNIPATNAM

Amount

Excavating over areas, n. exc. 1.5m deep and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 Sq.m. on plan and n. exc. 1.5m in depth and getting out in complete all as soft/loose soil complete all as specified and as directed.

All as per Item No. 2 above but depth exc 1.5 m and not exc 3 m.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated soil to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed.

Spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Use and waste of form work to sides of foundation/footings, plinth beams and similar work for rough finished surfaces complete all as specified and directed.

Use and waste of form work to sides of columns and pillars for for fair finished surfaces complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work, not exceeding 200mm thick for fair finished surfaces complete all as specified and directed.

Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces complete all as specified and directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in footings, plinth beams and the like complete all as specified and directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in columns and pillars complete all as specified and directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in lintel beams, roof beams lintle beams and the like complete all as specified and directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in slabs supported on walls and the like complete all as specified and directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) as in chajjas, shelves etc and the like complete all as specified and directed.

S & F 32 mm thick Flush shutters , solid core construction, with block board core and plywood face panels with both face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed.

M & L for second class Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel Paint over a coat of pink primer complete all as specified and directed.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F 125 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150mm size aluminium handles, cast type,anodised complete all as specified and directed.

S & F of 200mm aluminium anodised,barrel tower bolts of extruded section complete all as specified and directed.

S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M & L for anodised powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F anodised powder coated aluminium window and ventilator shutters, sliding type without sash bars, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, rollers, screws, anodised aluminium fittings such as suitable handle (1 No.) complete (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

S&F 4.0 mm thick plain sheet glass, ordinary quality in square exc. 0.5 sq.m. in each pane fixed to aluminium frame work complete all as specified and as directed.

S&F of aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F powder coated aluminium grill Decogrill or equivalent make as approved by GE fixed to aluminium frame work shutters (minimum thickness of powder coating 50 micron) including 'F' sections complete all as specified and directed. complete all as specified and as directed by the Engineer-in-Charge.

M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per Sl Item No. 33 but TMT steel bars upto 8mm dia

M & L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for 40mm thick Plain Cement concrete 1:2:4, type B-1 (20mm graded aggregate) in sub base complete all as specified and as directed.

M & L for 75 mm thick Plain Cement concrete 1:3:6, type C2 (40 mm graded aggregate) in sub base complete all as specified and as directed.

M & L for 75mm thick Plain Cement concrete 1:3:6, type C2 (20 mm aggregate) as in Plinth protection finished even and smooth with extra cement complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 fanished fair and even complete all as specified and directed.

M & L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 fanished fair and even complete all as specified and directed.

M&L for 5 mm thick rendering on ceiling surfaces in cement mortar 1:3 fanished fair and even complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over 2 mm thick wall care putty complete all as specified and directed.

M & L for preparation of new/old plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion over a coat of primer over a coat of wall care putty complete all as specified and directed.

M & L for 10 mm thick screed bed in CM 1: 3 over top of the roof surfaces for provision of roof treatment finished even and smooth without using extra cement complete all as specified and directed.

Supply and laying water proofing treatment with polymeric bituminous water proofing membrane of weight not less than 3 kg/Sq.m. with 90 micron thick high molecular high density poly ethylene film sandwiched between two layers of polymeric bitumen laminated on both sides with 20 micron HMHDPE film adhesed to the previously painted surface with a coat of hot blown bitumen 85/25 grade @ 1.2 kg/Sq.m. after priming the surface with a bituminous emulsion (tack coat) @ 100 gms/Sq.m. with 10cm over laps of membrane, fused by LPG torch and applying the entire surface a coat of hot blown bitumen 85/25 grade @ 1.2 kg/Sq.m. over polymeric standard membrane sanded properly when the bitumen is still hot complete all as specified and as directed by the Engineer-in-Charge.

S & F stainless steel pipe 25mm dia Curtain rod for windows, doors opening etc complete all as specified and as directed.

S & F Fancy type chromium plated knobs for fixing curtain rod complete all as specified and as directed.

M & L for Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc.set and jointed in neat slurry and pointed in white or coloured cemment to match for joint free over screed bed or bedding layer of mortar 15mm of thick CM 1:4 for laying floor finishes complete all as specified and as directed.

M & L for Non skid ceramic tiles in vertical surface 350x 250x 7 mm (or) 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match for over backing of 10 mm thick in CM1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

S & F grating doom 125 mm dia with waste hole of PTMT (Min weight 40 gms) complete all as specified and as directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, PVC low level flushing cistern of 10 Liters capacity and Seat Cover) complete all as specified and as directed.

Taking down bib taps/pillar taps/ stop valves complete all as specified and as directed.

S & F 15mm bore dia Pillar tap, fancy type, chromium plated, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F Bib taps 15mm dia Fancy type Chromium Plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F PVC flexible connections 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.

S & F PVC flexible connections 15mm size with PTMT nuts of length 600 mm long complete all as specified and as directed.

S & F 15mm bore dia Stop valves fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F two way bib cock, Chromium plated, Fancy type - 15mm dia, Make : Jaguar Catlogue No : FON-40041 complete all as specified and as directed.

S & F 15 mm dia two way bib cock, chromium plated, fancy type complete all as specified and as directed.

S & F Health Faucet for 15mm dia with 1.5m long easy flex tube in Chrome finish and wall look complete all as specified and as directed.

S & F 750 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S & F 25mm internal dia PP-R Ball valves (brass insert) as per requirement of the site complete all as specified and as directed.

S & F 25mm internal dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.

S & F 32 mm internal dia/bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F 25mm Internal dia/bore 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F 15mm internal dia/bore 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by the Engineer-in-Charge.

M & L for Underground drainage double wall corrugated HDPE pipe 150 mm dia SN4 confirming to IS : 16098(PART II) single socketed in any length laid in trenches or floors complete all as specified and as directed.

S & F Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

Taking down PVC (SWR) pipes of any 110/75 dia complete all as specified and as directed.

S & F PVC (SWR) pipes 40 mm dia fixed to walls complete all as specified and as directed.

S & F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius with axis door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S & F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius with axis door complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) gully trap 110 mm size, setting and jointing with solvent cement including grating complete all as specified and as directed.

S & F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.

S & F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) double 'Y' branch piece junction , single equal or unequal complete all as specified and as directed.

S & F Stainless Steel Tubular towel rail , 20mm dia, 60cm long between flanges complete all as specified and as directed.

S & F Soap dish chromium plated, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S & F Brass chromium plated shower rose 125mm size complete all as specified and as directed.

M & L for Walling of random rubble stone masonary uncoursed ,well bonded ,bedded and solidly hearted, built in CM 1:6 incl brought upto course at interval of every 60 cm complete all as specified and as directed

M&L for broken stone or boulders in hardcore of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for 50 mm thick Plain cement concrete 1:2:4, type C2 (20 mm graded aggregate) in subbase complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for designer cement concrete tiles rubber moulded of size 300 x 300 x 25mm thick, set, jointed and pointed in neat cement slurry with grey and cement pigment in floors over a screed bed of 20mm thick in cement mortar 1:4 complete all as specified and directed.

Taking down door chowkhat with shutter area n. exc 1.5 Sqm each(with taking off shutters from the frame) complete all as specified and directed.

Taking down door chowkhat with shutter area exc 1.5 Sqm and n.exc 4 Sqm each (with taking off shutters from the frame) complete all as specified and directed.

S & F Rolled Mild Steel Framed work as in doors or gates of angle or door chowkat other section confirming to Fe 410 -W(E-250)quality-A, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S & F 5.5mm thick plain sheet glass, ordinary quality, in square exc 0.5 sq. m in each pane fixed to aluminium frame work complete all as specified and directed.

S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated complete all as specified and directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B1 (Using 20 graded aggregate) as in benching/copping/leveling course and bed plate etc including necessary form work complete all as specified and directed.

S&F 100 mm long MS butt hinges cold rolled medium weight complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F 200 mm long aluminum anodized barrel tower bolt extruded section and fixed 200 mm long complete all as specified and as directed.

S&F Aluminum anodized handle cast type 150 mm size complete all as specified and as directed.

M&L for cutting and chases, pinning in making good to facings where required pointing in cement motor 1:3 to end or edges of landing, steps cills, sunshades, shelves, lintels etc. and cutting chases for concealed conduit wiring etc. and making good cutting n. exc. 10 cm girth in brick walls complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M & L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 fanished even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for machine cut granite mirror finished kota stone slab flooring 18-20mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing complete over 15 mm thick screed bed of CM 1:6 as in steps/shelves/window cills/cooking platform complete all as specified and directed. Note:- All Kota stones should be in uniform colour and each kota stone size should not be less than 550x550 mm cut size, except the location where the balance portion remain less than size specified.

M&L glazed ceramic coloured tiles 250 x 350x 6 to7 mm thick as in verticle surfaces, set & jointed in neat cement slurry & pointed with coloured cement to match with, over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L PCC 1:2:4 type B1 using 20mm graded stone aggregate for fixing of hold fasts etc including necessary form work complete all as specified and directed

M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and as directed. Note :- Joints shall be provided by mechanical cutter.

Taking down and refixing wooden shutters of any description exc 1 Sqm and n. exc 2 Sqm each complete all as specified and as directed.

Taking down wooden shutters of any description exc 1 Sqm and n. exc 2 Sqm each complete all as specified and as directed.

S&F Flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

M & L for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and as directed.

S & F 4.80mm thick plain sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for 25mm thick plain cement concrete 1:2:4, type B-1 (Using 20mm graded aggregate) in sub base complete all as specified and as directed.

M & L for Ist /Premium quality of non skid ceramic coloured joint free tiles of of size 400 x 400 x 6 to 7mm thick as in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete all as specified and as directed.

All as per Sl Item No. 119 above but on skirting over a backing coat of 10 mm thick in CM 1:4. complete all as specified and as directed by the Engineer-in-Charge.

M&L for glazed ceramic coloured tiles 300 x 450 x 6 to 7 mm thick as in vertical surface set & jointed in neat cement slurry & pointed with coloured cement to match over 10 mm thickbacking coat in CM 1:4complete all as specified and as directed by the Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed.

M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar 1:4 complete all as specified and directed.

S&F in repairs 32mm dia Gun metal Globe Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

M & L for complete removal of existing treatment on internal walls and applying two coats of Oil bound distemper over wall care putty of 2mm thick including one coat of primer over putty complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Tubular towel rail brass chromium plated, 20mm dia, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge.

M&L for vitreous china wash hand basin, white, flat back, size 550x400mm execluding taps ,waste pipe , chain and plug but including brackets, cutting cutting and for pinning in ends of brackets complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet of "Orissa" pattern size 580 x440mm white with integral foot rests including connection to trap and to flushing pipe anti syphonage pipe etc complete and making good to floor all as specified and directed.

S&F in repairs PVC Flushing cistern 10 ltr capacity with inlet ball valve float, handle and 32mm bore flush pipe including bracket complete all as specified and directed.

S & F 125mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for stainless steel chromium plated plate rack of size 600mm (Width) x 750mm (Height) x 300 mm (Depth) made by 1 mm thick sheet complete all as specified, directed and as approved by GE.

M & L for preparion of old treated surfaces and applying two coats of weather proof exterior emulsion on walls over a coat of primer over a coat/layer of wall care putty complete all as specified and as directed.

M&L for 15 m thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra and mixing water proofing compound complete all as specified and as directed by the Engineer-in-Charge. Note : Water proofing compound will be measured and paid separately.

M&lL for 10 mm thick rendering on fair faces of concrete surfaces as in ceiling in CM 1: 4 finished even & smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Providining/making hole in marble/granite slab of cooking plateform for cooking gas pipe etc by means of drilling machine n.exc 25 mm dia complete all as specified and directed by Engineer-in-Charge

M&L for 100 mm long hasp and staple, aluminium anodized including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections complete all as specified and directed.

S & F 500 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 20 mm bore ball valve high, pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

S&F in repairs 20mm dia Gun metal Globe Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking down old tarfelt treatment from roof surfaces including plaster etc complete all as specified and as directed by the Engineer-in-Charge.

Demolition of mud phuska treatment any thickness including plastering and leaping plaster any thickness and removing complete all as specified and directed.

M&L for cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (Using 20 mm graded stone aggregate) as in roof padding over roof slab, roof kerbs or mud stop rounded or chamfered on edges complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S & F 18 mm thick Prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboards etc complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised for 30 mm width of flaps complete all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 Kg/per square centimetre in field using 400 Kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

M&L for boulder pitching dry, hand packed tightly and grouted with cement and sand mortar 1:6 complete all as specified and directed.

Taking down carefully existing aluminium conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed.

Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc. for reuse at site complete all as specified and as directed. (Note : To be measured only when found serviceable in all respects complete for reuse)

M&L for point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including new pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface all as specified and as directed.

All as per Item No 153 here-in-before but for one fan point controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item No.153 above but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item No 153 here-in-before but for one switch socket outlet, 5 Amp on the same board with other switches all as specified and as directed

All as per Item No 153 here-in-before but for one bell point controlled by one bell push on the same board with other switches or independent board all as specified and as directed

All as per Item No 153 here-in-before but for one light point controlled by Two way switch all as specified and as directed

All as per Item No.153 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

S&F socket out let multipurpose 3 pin 15 amp and one 3 pin 5 amp controlled by and including one 15 amp switch all as specified and as directed.

S&F switch piano flush button single pole one way 5 amps all as specified and as directed.

S&F switch socket outlet 5 pin 5 amp flush type with including switch all as specified and as directed.

Fixing only switch flush button single pole one way 5 amps ( Material obtained from Item No. 150 here-in- before )flush type with incl switch all as specified and as directed.

S&F ceiling rose surface bakelite three terminals all as specified and as directed.

S&F Ceiling fan regulator electronic deluxe rotary step type all as specified and as directed.

S&F sheet metal enclosure for MCB DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8 way with dim rail earth and neutral bar all as specified and as directed.

S&F in proper position MCB SP 6 to 32 amps, C curve 10 KA breaking capacity of 240 Volts complete all as specified and as directed.

S&F in proper position MCB Double Pole of capacity up to 40 amps, 240 Volts C series with 10KA breaking capacity complete all as specified and as directed.

S&F indoor luminare decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 10 W including twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. Make:Havells Cat Part No. LHEXBTP7IN1W009 or equivalent model in Philips/Wipro/Crompton.

S&F indoor luminare decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20W including twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. Make:Havells Cat No. LHEXACP7IN1W020 or equivalent model in Philips/Wipro/Crompton.

S&F lamp holder insulated body suitable for Retrofit lamp all as specified and as directed.

S&F energy saving and enviromental friendly long life LED Building security light 25 W with IP66 protection , 230 volts, 50 HZ including cable from ceiling rose with 1.5 Sqmm PVC insulated standed copper cable and 25 mm dia medium grade GI bracket of size 1.5 mt complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Model No.ENDURA PEARL 25 W MP Cat. Part No.ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in Phillips/Crompton/Wipro

S&F Exhaust fan wall mount type 300 mm sweep metal body Heavy duty , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

Supply and lay cable XLPE PVC insulated amoured, heavy duty electric power cable with aluminum conductor 1100 volts cross sectional area 16 Sqmm 2 core complete all as specified and directed.

Supply and spread clean river sand as cable cushioning for protection of cable to be laid in trenches all as per SSR part I complete all as directed by Engineer-in-Charge. Note: Punned thickeness will be measured and paid.

Supply and lay bricks common burnt clay building bricks sub-class B of size 230x113x75 in cable trenches complete all as directed

M&L for earthing complete with 7.5m CI pipe 80mm dia. with both flanged ends, centrifugally cast iron, Class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slote up to 7.5m length buried directelly and preferable vertically in ground with top flanged ended 7.5m below ground lebel welded/connected with copper strip 25x3mm size on the top edge of the flange to bottom edge of the flanged for earthing includding filling the pit with charcol and common salt surrounding the earth pipe including drilling 400mm dia. bore in any strata of soil to lower the CI pipe complete all as specified and as directed by the Engineer-in-Charge. Note: The rate deemed to be included earth pit chamber, CI cover and earth lead 32x6mm GI strip from earth pit to DB upto 7m length and testing on completion.

Supply and lay medium grade galvanised 25mm dia GI tuibing with all fitting complete to walls and ceilings or laid in floors complete all as specified and as directed.

Material and labour for cutting and screwing existing steel tubing of size 15 mm dia for alterations or additions complete all as specified and as directed

S&F in repairs 25mm dia Gun metal Globe Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 25 mm dia ball brass valve high pressure with polycarbonate flot and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed

M&L for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 2.5 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 to the ends with taking down old unserviceable sub main wiring and making good disturbed surface complete all as specified and as directed. Note: Two runs of 4 Sq.mm. cable, one run of 2.5 Sq.mm. cable and one length of PVC conduit shall be measured as ne length.

Fixing only switch socket outlet 5 amp flush type (Material obtained from item No.150 here-in-before ) all as specified and as directed.

Fixing only ceiling rose surface bakelite three terminals (Material obtained from item No.150 here-in-before) all as specified and as directed.

S&F switch flush type, single pole Two way 5 Amps 230 volts all as specified and as directed.

S&F sheet metal enclosure for MCCB DBs, phosphatised, powder coated , triple pole and neutral (TPN), suitable for 4 way, Double door 415 Volts all as specified and as directed .

S&F in proper position MCCB, four pole of capacity 100 amps, 415 Volts 25 KA breaking capacity complete all as specified and as directed.

S&F in proper position MCB Four Pole (FP) C curve 10 KA breaking capacity of 63 amps, 415 Volts complete all as specified and as directed.

Supply and lay of size 4core 25sqmm cable XLPE PVC insulated amoured, heavy duty electric power cable with aluminum conductor 1100 volts cross sectional area complete all as specified.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan including blades to the work shop including cleaning and dismantling the fan into parts and segregation of unserviceable parts, replacement of unserviceable spares/parts with new parts including necessary machining work and lubricating with approved grade of grease and necessary minor soldering work (if required) and re-assembling the fan complete and testing and refixing the fan in same position including all electrical connection and material and labour for replacement of two nos split pins, one connection block and one rubber reel all as specified and as directed. Note : The rate quoted is deemed to be inclusive of Rewinding work (if any), new spare parts required for replacing old worn out parts other than connector and labour cost for replacing spare parts.

M&L for preparation of old painted surfaces and removing all dust, oil mark etc and filling cavaties with filler materials for ceiling fans of any sweep/make and applying one coat of first quality synthetic enamel paint of approved tint by spray including and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc 2 cm ) complete all as specified and as directed.

Taking down carefully existing exhaust fan of size 300mm to 450 mm sweep and any make after disconnecting the electrical connection, and removing the exhaust fan with blades to the work shop including cleaning of dust and dismantling the fan into parts and segregation of unserviceable parts, replacement of unserviceable spares parts with new parts including necessary machining work and lubricating with approved grade of grease and necessary minor soldering work (if required) re-assembling the fan complete , testing and refixing the fan in same position including all electrical connection and material and labour for replacement of one connection block all as specified and as directed. Note : The rate quoted is deemed to be inclusive of Rewinding work (if any), new spare parts required for replacing old worn out parts other than connector and labour cost for replacing spare parts.

M&L for galvanized iron tubing 25mm bore light grade with all fittings for protection of FRLS cable, laid in trenches/wall/floor including necessary clamps, bolt/nut complete all as specified and as directed. Note: Earth work excavation willbe measured and paid separately.

S&F bell ding dong AC 230 volt single pole complete all as specified and as directed

S&F 10 W LED decorative CITY 3 wall/surface mounting polycarbonate body siitable for retrofit LED Lamp base B-22 complete all as specified and as directed. Make Havells cat Part No.LHDL06160099 or equivalent model in Philips/Wipro/Crompton.

Supply and fixing 9 W LED lamp 4 star suitable for Retrofit LED fitting complete all as specified and as directed. Make:Havells Cat Part No. LHEDEUECNL8R009 or equivalent model on Phillips/Wipro/Crompton

Taking down carefully ceiling fan of any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan including blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connection complete all as specified and as directed

M&L for earthing with copper earth plate electrode 60cmx60cmx6mm buried directly in ground vertically to a depth of not less than 2.25m below ground level with the top edge not less than 1.5m below ground level connected to 4mm dia. GI wire as earth lead by means of bolts, nuts and washers including necessary earthwork & excavation, CI cover, watering pipe funnel, PCC pit etc. complete and frame work complete all as shown in electrical plate No.3 of MES Sch ‘A’ Part-I complete all as specified and as directed by the Engineering-in-Charge. Note: The rate deemed to be included earth pit chamber, CI cover etc. and earth wire from earth pit to test point upto 7.5m length.

SRI GOWRI ENGINEERING WORKS

N V S S K N SIVA PRASAD

SWATHI CONSTRUCTIONS