Supply and fixing of LED flood light fitting 200 watt in replace of sodium flood light at 10 High Mast Pole and repairing of control pannel board,cable ,high mast pole,etc at different places

Amount

Part A :Repairing of high mast light

S/F of LED street light fitting 200 watt with proper connection..(specification :- LED streetlight made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. Lumen Efficacy: > 110 Lm/W and operating voltage range of 140V-270V, Surge Protection of 5KV internal, Power Factor≥0.95, CCT of 5700K

S/F of MCCB 63 Amp MCCB 4 Pole with proper connection

S/F of 40 Amp contactor 4 pole with proper connection etc

S/F of timer switches (surface mounting) 4 pole

S/L of PVC insulated Aluminium Armoured cable 16 sq mm X 4 core with proper connection complete in all respects

S/F of motors foot mounted three phase (1 H.P)operate reverse & forward with proper connection

S/F of door for electric control pannel with locking system & weld with hinges in pannel including powder coatedpaint etc.complete in all respects

S/F of powder coated pannel board made from CRCA sheet suitable for grout/ fix in ground with 40 Amp, 4 Pole contactor, 63 Amp MCCB 4 Pole, Timer Switch 4 Pole, Bus Bar etc. with proper connection & grout with C.C etc complete in alll respect

Repair charge of electric control pannel board with proper connection etc complete in all respects

S/F of three phase connection box for LED Flood lights on top of High Mast Pole

S/F of LED aviation light with proper connection

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and laying 6 SWG G.I wire at 0.50 meter below ground level for conductor earth electrode,including connection/ termination with G.I thimble etc. as required

S/W of PVC insulated sheathed copper wire 5 core X 2.5 sq mm

Dismantling/removing of sodium flood light fittings from above 10 high mast pole(6 nos. flood light fittings set x 2 lamps & copper choke etc. per each high mast pole) with disconnection including cartage from different site to MDDA Store

Saklani electrical works

M/s Dhawan Electrical Works

National Electricals