REPAIR TO DOOR / WINDOW PLASTERING FLOORING PLUMBING SANITARY ITEMS AND MISC B/R WORKS OF JCOS/OR MD/OTM ACCN OF 27 MADRAS 26 MARATHA LI 382 ASC COY 104 AD REGT AND MH AT JAMNAGAR MIL STATION

Amount

M&L Preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as specified and directed by Engineer-In-Charge.

M&L preparation of old painted surfaces of wood/ wood based materials of any description over 10Cm width or girth and applying one coat of synthetic enamel paint etc. complete all as specified and directed by Engineer-In-Charge.

M&L Preparation of old surfaces of wall removing nails including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) , filling undulation and holes with putty and applying one coat of oil bound distemper with roller finish complete all as directed.on walls etc.complete as specified and as directed by Engineer-In-Charge.

M&L Preparing old decorated surfaces by complete removal of existing treatment, scraping down, washing, rubbing down and stopping of painted surface of walls & ceiling including roof projection / chajjas and by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9lit/10 sqm complete all as specified and directed by Engineer-In-Charge.

M&L Preparing old decorated surfaces by complete removal of existing treatment, scraping down, washing, rubbing down and stopping of painted surface of walls & ceiling including roof projection / chajjas and by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on one coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9lit/10 sqm complete all as specified and directed by Engineer-In-Charge.

Complete Removal of existing treatment on wall and applying two coats of oil bond distemper and 1 mm putty complete all as specified and directed by Engineer-In-Charge.

Taking down cement plaster on brick, stone or concrete surface including racking out joints hacking for key scrubbing down with water to receive plaster a, etc complete all as specified and directed by Engineer-In-Charge.

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of stone masonry/brick/concrete surfaces or surfaces other than fair faces of brick work, finished even and fair without using extra cement complete all as specified and directed by Engineer-In-Charge.

M & L for rendering 10mm thick plaster in CM (1:6) on surfaces of brick work/ stone masonry /concrete surface, finished even and fair without using extra cement complete all as specified and directed by Engineer-In-Charge.

M & L for Rendering 5mm thick plaster in CM 1: 4 to ceiling,finished even & smooth with using extra cement complete all as specified and directed by Engineer-In-Charge.

M & L for preparation of new plastered surfaces of walls by applying chalk whiting, preparatory to distempering and evenly applying two coats of oil bound distemper (oil emulsion) on walls complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-In-Charge.

M&L Preparation of newly plastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-In-Charge..

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm complete all as specified and directed by Engineer-In-Charge.

Taking down shutters of any description exc 1.0 sqm and nexc 2.0 Sqm each complete all as specified and directed by Engineer-In-Charge.

Refixing in same opening shutters of any description exc 1 sqm but n exc 2 sqm complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class hard wood in plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned joints including necessary tarrying and sanding complete all as specified and directed by Engineer-In-Charge.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-In-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per complete all as specified and directed by Engineer-In-Charge.

S&F 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (any number of Panel) with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces,. The size of rail and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated. complete all as specified and directed by Engineer-In-Charge.

S&F 35 mm thick Flush shutters, solid core constuction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed by Engineer-In-Charge.

S&F powder coated anodised Aluminium alloy sections door frame weight 2.863 Kg/Rm and 12mm Toughened glass shutter Jindal or equivalent duly fitted with neoprene beading, glazing clips, glass panes 12 mm nominal thickness aluminium alloy handles etc. complete all as specified and directed.(Make: Jindal/Hindalco/Indal) Note : Rates include all joining,, locking arrangements, handle, hinges etc complete all as specified and directed by Engineer-In-Charge.

S&F 35 mm thick 2nd class hardwood factory made glazed & skeleton door shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed by Engineer-In-Charge.

S & F stainless steel wire cloth 0.36mm dia of wire and avarage width of aperture 1.40mm and fixed with stainless steel wire staple in any type of window/door/ventilator complete all as specified and directed by Engineer-In-Charge.

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed by Engineer-In-Charge.

S&F100mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,type B21 complete all as specified and directed by Engineer-In-Charge.

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised complete all as specified and directed by Engineer-In-Charge.

S&F Aluminium anodised barrel tower bolts, 150 mm long, of extruded section complete all as specified and directed by Engineer-In-Charge.

M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all as specified and directed by Engineer-In-Charge.

S&F coloured aluminium anodised sliding window of 3 track, frame of section 92mm X 32mm X 1.47 mm or appropriate equivalent section and shutters of section 18 mm X 44 mmX 1.35 mm or appropriate equivalent section ,aluminium sections weighting 0.55 Kg/m, fixed with 4.80/5mm thick tinted glass with rubber gasket, handles, locking arrangement and SS wire mesh,aluminium powder coated any colour (powder coating not less than 50 micron) incl making good jambs, cills etc including taking down old iron window complete all as specified and directed by the Engr-in-Charge. Note : rate shall include all glazing/SS wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

S&F in powder coated aluminium fixed louvered ventilator, frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 4 mm thick figured/frosted sheet glass with rubber gasket,Aluminium wire mesh, handles, locking arrangement etc incl making good jambs, cills etc and including taking down old iron ventilator complete all as specified and directed by the Engr-in-Charge.

S & F in repair stainless steel wire cloth 0.36mm dia of wire and avarage width of aperture 1.40mm and fixed with stainless steel wire staple in any type of window/door/ventilator complete all as specified and directed by Engineer-In-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L Non skid coloured ceramic tiles 7-8mm thick area of each tiles exceeding .06 Sqm but not exceeding .11 Sqm, in floors etc. set and jointed in neat cement slurry mixed with water proofing liquid compound and pointed in white or coloured grouting chemical to match , over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-In-Charge.

M&L Glazed ceramic coloured designer tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 0ver 10mm thick plaster in cement mortar (1:3) complete all as specified and directed by Engineer-In-Charge.

S&F Coloured Vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles n exc 0.36 sqm in floors and jointed in neat cement slurry and pointed in white or coloured cement to match in light shade including 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-In-Charge.

M&L18- 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms,wash basin counter and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, incl 20 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-In-Charge.

Moulding to Granite(single or double) slab including rounding off edges for 20 mm thick slabs including grinding and polishing complete all as specified and directed by Engineer-In-Charge.

Taking down steel tubing and connection including cleaning for refixing or removal to store complete

(a) 20mm dia

(b) 25mm dia

S&F tube medium grade galvanised steel with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engineer-In-Charge.

(a) 20mm dia

(b) 25mm dia

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and directed by Engineer-In-Charge.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engineer-In-Charge.

S&F in repairs counter sunk Vitreous china wash basin (560x410x180mm) white including mounting on granite slab 20mm thick brass chromium plated perforated waste coupling /fittings 32mm dia with long screwed shanks and fly nut, flangeebd bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length complete all as specified and directed by Engineer-In-Charge.

S&F in repair 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Brass CP three way wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-In-Charge.

S&F fancy type CP bib taps, 15 mm bore with crutch or , screwed down, fixed as in repairs complete all as specified and directed by Engineer-In-Charge.

S&F in repairs stop valve chromium plated with l 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-In-Charge.

S&F in repairs fancy type Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe/cpvc pipe and fixed complete all as specified and directed by Engineer-In-Charge.

S&F 15 mm bore Chromium plated shower roses with or without swivel joints, any size, including fixing to steel/cpvc pipe or union in repairs complete all as specified and directed by Engineer-In-Charge.

S&F Tubular towel rail, brass CP 20mm dia, D type, 60cm long between flanges in repairs complete all as specified and directed by Engineer-In-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and directed by Engineer-In-Charge.

S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors. complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-In-Charge..

S&F in repairs 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PVC(SWR) bend any radius, 110 mm dia.provided with access door complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 110mm PVC (SWR) junction double, (double T), equal or unequal provided wit access door complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-In-Charge.

Hacking out old broken glass (any thickness, size, any discription from wooden / metal frame incl glazing pins and beadings all as specified and as directed by Engineer-In-Charge.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each pane in steel window/wooden window including beading and complete fitting all as specified and directed by Engineer-In-Charge.

Dismantling exc 250 and n exc 500 ltr water tank removing to store complete all as specified and directed by Engineer-In-Charge.

S&F 500ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm ball/float valve complete all as specified and directed by Engineer-In-Charge.

Dismantling exc 500 and n exc 1000 ltr water tank removing to store complete all as specified and directed by Engineer-In-Charge.

S&F 1000ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm ball/float valve complete all as specified and directed by Engineer-In-Charge.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including CI 'P' or 'S' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish with and includingand PVC flushing pipe, 32 mm dia complete all as specified and directed by Engineer-In-Charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe). complete all as specified and directed by Engineer-In-Charge.

S & F plastic water closet seat for pedestal pan,black(coloured) closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and complete all as specified and directed by Engineer-In-Charge.

S&F CP Health Faucet with 1.50mtr tube & Hook any description including flexible attachment in repair as,complete all as specified and directed by Engineer-In-Charge.

S&F SS Curtain Rod Decorative pattern as approved by Engr-in-Charge. In repairs complete all as specified and directed by Engineer-In-Charge.

S&F SS Curtain Rod Bracket decorative type all as directed and approved by Engr-in-Charge in repairs complete all as specified and directed by Engineer-In-Charge.

S&F Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals etc complete all as specified and directed by Engineer-In-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for window grills etc complete all as specified and directed by Engineer-In-Charge.

S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new steel surfaces exc 10 cm in width or girth and applying 2 coats synthetic enamel paint over a coat of red primer complete all as specified and directed by Engineer-In-Charge..

SHAM AND CO (BID ID -3455488)

M/S Badri Electicals (BID ID -3457279)