Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹8.6 LAdmitted-Fee/PreQual/Technical/Finance SOUTH MANUBANKUL ROAD SABROOM SOUTH TRIPURA PIN 799143 | SOUTH TRIPURA | TRIPURA | 799143 | -1.29% | ₹8.6 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹8.7 L
EMD Value
₹17,385
Closing Date
3 Sept 2026, 3:00 pmClosed
The Executive Engineer, DWS Division, Sabroom
O/o the Executive Engineer, DWS Division, Sabroom
R/Mtc. of RWS/ARWS/NRDWP Schemes/S.H Maintenance and repairing of existing SBDTW Schemes at different locations of Rupaichari Sector under Rupaichari Block within DWS Sub-Division, Rupaichari during 2026-27.
2026_CEDWS_76312_1
26/EE/DWS/DIVN/SBM/2026-27
Open Tender
Civil Works - Water Works
Percentage
365 days
Sabroom
Please refer tender documents.
8 documents required · 8 mandatory
₹1,000
₹17,385
14 Sept 2026
25 Aug 2026
3 Sept 2026
25 Aug 2026
3 Sept 2026
25 Aug 2026
25 Aug 2026 - 3 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Lifting of submersible pump with delivery assembly by heavy duty chain - pully after dismantling from delivery line and staking properly as per direction of the Engineer-in-charge. | - | Job | 940 | - |
| 2 | Labour charge for fitting fixing and lowering of Submersible pump sets with delivery assembly 900 to 00 in/c. re-fitting fixing with the delivery line etc. as per direction of the Engineer-in-charge. | - | Job | 850 | - |
| 3 | Development & washing the tube well by using Air Compressor (diesel operated) until sand free water is available as per direction of the Engineer-in-charge. | - | Job | 3,000 | - |
| 4 | Providing and fitting fixing of 1500 GPH capacity submerssible with 10 stage pump with suitable single phase 2 HP submerssible motor with head of 48.00 mtr. DUKE make/VARUNA Make/ and other ISI mark make etc complete in all respect as per direction of the Engineer-in-charge. | - | Job | 19,120.97 | - |
| 5 | Repair and maintenance of submerssible Motor suitable for capacity submerssible pumpset by complete dismantling in/c. providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
i) 2.0 HP Motor suitable for 2000 GPH capacity submerssible pumpset. | - | No. | 6,794.9 | - |
| 6 | Providing & fitting fixing of single phase motor starter unit (with heavy duty 2 pole contactor, relay range 18.0 - 25.0, with volt meter & amps meter) of Havels/BCH/L&T make suitable for 2 HP Submersible motor etc complete as per direction of the Engineer-in-charge. | - | Job | 5,334.07 | - |
| 7 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of Thermal release range, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge.
i) 25-32 Amps. | - | No. | 5,299.3 | - |
| 8 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge.
i) 2.50 sqmm. | - | Mtr. | 211.3 | - |
| 9 | Providing and fixing G.I pipes medium class as per IS: 1239 with latest amendment complete with G.I fittings in/c. trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Eng.- in-Charge.
A) External work.
i) 40 mm dia. nominal bore. | - | Mtr. | 549.1 | - |
| 10 | Suppling and fitting fixing of M.S(18SWG)"KIOSK"(size;-width 450mm X length1200 mm x height 850mm) fitted with 4 Nos .support of 75mm X 75mm(6mm thick)M.S angle for embedding in 1:2:4 cement concerete bass(size 300mmX 300 X 600mm) with proper locking arrangement and coated with anti-corrisive base( size 300 mm x 300 mm x 600mm) with proper locking arrangement and coated with anti-corresive paint(both inside and outside) including necessary provisions for fitting fixing of single phase motor starter unit,main switch,energy meter etc, complete in all respect as per direction of the Engg. In-charge. | - | Nos. | 10,000 | - |
stage.html
html • 0.02 MB
finance_77683.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 3.47 MB
Appendix.pdf
Additional Documents • 0.40 MB
Annexure-II.pdf
Additional Documents • 0.28 MB
Form-7.pdf
Additional Documents • 0.32 MB
DNIeT-26.pdf
Tender Documents • 2.92 MB
BOQ_77683.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .