Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹15.4 LAdmitted-Finance | -23.15% | ₹15.4 L | L1 | Admitted-Finance |
| 2 | L2₹15.4 L+₹7,202 (0.47%)Admitted-Finance | -22.79% | ₹15.4 L+₹7,202 (0.47%) | L2 | Admitted-Finance |
| 3 | L3₹19.4 L+₹4.0 L (25.9%)Admitted-Finance | -3.22% | ₹19.4 L+₹4.0 L (25.9%) | L3 | Admitted-Finance |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
4 Jun 2026, 6:00 pmClosed
XEN CMD SVP
kangan
Repair works inside power house like repairing of transformer bed stairs front store work including machine hall floor control room floor stairs and arresting of water leakages in machine hall at MHP Pahalgam
2026_SPDC_309837_5
CMD SVP K 04 of 2026
Open Tender
Civil Works
Percentage
75 days
Pahalgam
Please refer Tender documents.
5 documents required · 5 mandatory
₹715
CPAO PDC Srinagar
₹40,000
Divisioal office
8 Jun 2026
13 May 2026
6 Jun 2026
14 May 2026
4 Jun 2026
14 May 2026
18 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.
For thickness of tiles 10 mm to 25 mm | 82.04 | Sqm | 57 | ₹4,676.28 |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :
Of area of 3 sqm. and below | 3 | Each | 285.25 | ₹855.75 |
| 3 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete
with: Makrana Doongri adanga veined (18 mm Thick) | 100 | Sqm | 5,762.45 | ₹5,76,245 |
| 4 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete:
12 mm thick | 15.71 | Sqm | 2,668.1 | ₹41,915.85 |
| 5 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) | 1,500 | Kg | 522.7 | ₹7,84,050 |
| 6 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item.)
With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) | 158 | Sqm | 1,061.95 | ₹1,67,788.1 |
| 7 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).kg | 50 | Kg | 731 | ₹36,550 |
| 8 | Providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge. Polyester powder coated minimum thickness 50 micron aluminum tubular handle bar | 6 | No | 661.25 | ₹3,967.5 |
| 9 | Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete. 8.25.2 MDF board IS: 1998 m
25 mm thick | 40 | Sqm | 2,308.3 | ₹92,332 |
| 10 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) | 74.85 | Kg | 607.4 | ₹45,463.89 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.33 MB
BOQ_1002757.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .