Rehabitation/Rejuvenation of various water supply schemes in Jal Shakti Sub Division Mandap in Tehsil Dharampur District Mandi HP under Jal Jeevan Mission

Amount

Construction of building

Excavation in foundation trenches etc. in earth work, lift upto 1.50mtr stacking the excavated soil not more than 3 mtr clear from the edge of excavation and then returning the stacked soil in 15cm layers, when required in to plinth, sides of foundations etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20mtr. (P J Work)

Providing and laying cement concrete 1:6:12 (one cement: six sand : twelve graded crushed stone aggregate) 40 mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth. within all leads and lifts complete as per the direction of Engineer-In-Charge

Providing and laying cement concrete 1:4:8 (one cement : four sand : eight graded crushed stone aggregate) 40mm ) nominal size and curing compiete excluding cost of form work in foundation and plinth. within all leads and lifts complete as per the direction of Engineer-In-Charge

Random rubble masonry/Polygonal rubble masornry ( uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth I/c levelling up with cement conrete 1:6:12 (1cement:6 sand :12 graded stone aggregate 20 mm nominal size ) at plinth level in cement motar 1:6 ( 1cement:6 sand). and curring complete including all leads and lifts as per the directions and to the entire satisfaction of the Engineer-in-charge.

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete. within all leads and lifts complete as per the direction of Engineer-In-Charge

Boulder filling under floor with hard stone, with at least one broken face, hand packed properly within all leads and lifts complete as per the direction of Engineer-In-Charge

Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 stone aggregate 20 mm nominal size) and curing complete.

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) using 1.70 kg. per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. within all leads and lifts complete as per the direction of Engineer-In-Charge

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centering, shuttering, strutting and propping etc. With wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. and removal of the same for in situ-reinforced concrete and plain concrete work in:

Foundation, footings basis of columns etc and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like

Columns, pillars, posts and struts (Square, rectangular or polygon in plane).

sides of soffits of beams, beams haunchings, cantilevers, bressumers and lintels not exceeding 1 mtr in depth in all heights from floor.

Edges of slabs and breakes in floors and walls under 20cm wide.

Brick work using (second class bricks) common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortar 1:6( 1 cement: 6 sand) and curing complete .

Half brick masonry using common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortar 1:4( 1 cement: 4 sand).within all leads and lifts complete as per the direction of Engineer-In-Charge

Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete upto floor two level within all leads and lifts complete as per the direction of Engineer-In-Charge

Providing and laying Reinforced cement concrete work 1:1.5:3 and curing complete excluding the cost of form work and reinforcement work in:-

Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level.

In column, pillars, posts and struts.

Lintels, beams girders bressumers and cantilevers upto floor two level :

Providing and Fixing anodised aluminium work (JINDLE MAKE) for door,window,ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868.(minimum anodic coating of grade AC 15) fixed with rawl plug and screws or with fixing clips,or with expansion hold fastener including necessary filling up of gaps at junctions at top,bottom and sides with required PVC.neoprene felt etc. Aluminium section shall be smooth rustfree,straight,mitred and jointed mechanically where ever required including cleast angle,aluminium,snap beading for glazing/panelling C.P. brass/stainless steel screws . All complete as per architectural drawings and the directions of Engineer-in-Charge.

For doors,windows and ventilators and glazed partitions frames

Providing and fixing anodized aluminium shutters of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)

P/F aluminium Grills of required pattrens including fixing with steel screws complete as per the direction Engineer-in-charge .

Providing and fixing anodized aluminum sliding doors bolts anidized colour and shade with bolts and nutts, screw, etc complete as per the direction of Engineer-In-Charge

250x16mm (Three hundred into sixteen millimeters) nominal size.

Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc complete as per the direction of Engineer-In-Charge

200x10mm (Three hundred into ten millimeters) nominal size

150x10mm (Two hundred fifty into ten millimeters) nominal size

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per the direction of Engineer-In-Charge

150mm (one hundred twenty five millimeters) nominal size

100mm (one hundred millimeters) nominal size

Providing and fixing M.S. hooks and eyes 200mm. Complete within all leads and lifts as per the direction of Engineer-in-Charge

Providing and fixing hudraulic door closer of approved brand and manufacture ) complete as per the direction of Engineer-In-Charge

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25mm dia and brackets of first clas deodar wood (actuallength) of rails to be measured.

Providing and laying Kota stone slab 25mm thick in risers of steps skirting dado and pillars laid in 12mm thick in cement mortar 1:3 (1 cement : 3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.

Upto all floor level.

Providing and Fixing 10mm thick anti skid water proof stain and impact resistance heavy duty vetrified tiles (NITCO or equivalant make) 600x600mmx10mm manufactured of approved shade and colour in flooring,treads of steps and landings laid over 12mm thick cement mortar 1:3(1 Cement :3 Sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

White glazed tiles 6mm thick (NITCO MAKE) in skirting risers of steps and dedo 12mm thick cement mortar 1:3 ( 1 cement : 3 sand) and joited with cement slurry.

Providing/Laying granite stone flooring 20mm average thickness base of cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete 20mm thick.

Providing/Fixing 0.60mm thick prepainted steel sheet (TATA make)in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge .

Providing/Fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel (TATA make) sheets in roofing with hut dipped metallic zinc coated sheets with top coat of regular modified polyesters organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia prepainted G.I. limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing/Fixing valley 60cm overall 0.60mm thick prepainted steel sheet ( TATA Make) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyesters of 5 microns cover 5 microns primer coating including fixing with prepainted iron J or L hooks bolts & nuts 6mm dia with prepainted GI limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing/Fixing flushing 38cms overall with 0.60mm thick prepainted sheet ( TATA make) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 micron primer coating plus back coat polyester of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks bolts nuts 6mm dia and prepainted GI limpet bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge.

P/F M.S.BP Sheet 1.66 mm to 2mm thick TATA MAKE in eves board/facia/soffits/celing including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in -Charge ( Base member of steel work shall be measured & paid separtely)

Providing Brick tile cladding 12 mm thick on front and back side of building within all lesads asnd lifts as oer the direction and to the entire satisfaction of Engineer in Charge

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressures not less than 4.5 kg/Sqm i/c filling the joints with approved adhesive complete. (100mm dai pipes)

Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete.

PVC plain bend 100mm dia

Providing and fixing M.S. holder bats clamps of approved design of CI or SCI embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix ( 1 cement : 2 sand : 4 graded stone aggregates 20mm nominal size) and cost of cutting holes and making good the wall etc. 100 mm dia for PVC pipe.

Steel work(TATA MAKE) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint

In trusses and trussed purlins in building

20 mm thick cement plaster with cement mortar 1:4(1 cement: 4 sand) in single coat on rough side of brick/concrete/stone walls for interior plastering all heights including arises, internal rounded angles chamfers and/ or rounded angles in all girth and finished even and smooth i) Upto floor two level

15mm thick cement plaster with cement mortar 1:4(1 cement:4 sand) in single coat on fair side of brick/concrete/stone walls for interior plastering all heights including arises, internal rounded angles chamfers and/ or rounded angles in all girth and finished even and smooth i) Upto floor two level

Providing and fixing stainless steel railing (1.00 mtr. height)a fixed in straight length over stainless steel flat/round at top of vertical & horizontal balusters including fixing with steel screws complete as per the direction of Engineer-in Charge.

Providing and fixing 12 mm thick and 100 mm vide pelmet with 25 mm diameter curtaing rod and brackets including fixing with 25x3 mm M.S. flat 10 centimeter long and plugs etc. complete in 1st class deodar wood within all leads and lifts as per the direction of Engineer-in- Charge.

6mm cement plaster to ceiling in cement mortar 1:4(1 cement :4 sand) to give smooth and even surface i/c the cost of form work & curing complete upto floor two level.within all leads and lifts as per the direction of Engineer-in- Charge.

Providing and fixing 40mm thick plain framed panelling with necessary screws priming coat on unexposed surfaces etc. complete with 1st class Indian teak wood. within all leads and lifts as per the direction of Engineer-in- Charge.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement: three sand) to give smooth and even surface i/c the cost of form work & curing complete upto floor two level.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink.

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint ( asian make)to give an even shade including cleaning the surface of dirt, dust and other foreign matter sand paaperiang & stoping. With enamel paint other than white.

Applying priming coat over new steel and oterh metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed priming paint brushing red lead, red oxide/zinc oxide chrome.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint ( Asian make) brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with enamel paint other than white complete.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture ( Asian make) for interior grade on undecorated concrete/stone/plastered wall surface give an even shade including thoroughly brushing the surface to given an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matte and sand papered smooth including applying of putty as required for melting the surface

Finishing wall with weather proof exterior grade emulsion of approved design (Apex ultima) or its equivalent on undecorated wall surfaces (two coats) of (ASIAN paints) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etc. including sand papered smooth complete.

Providing plinth protection 50mm (fifty millimeters )thick in cement concrete 1:3:6 ( one cement: three sand: six graded stone aggregate 40mm(forty millimeters) nominal size) including finishing the top surface of concrete.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground.

Constructing course rubble hammer dressed U shape open surface drains with side walls 15x23centimetre in cement mortar 1:6 (1 cement: 6 sand ) and inside plastering with cement plaster 1:3 (1 cement: 3 sand) including earth work laying 1centimetre cement concrete 1:5:10(1 cement: 5e sand: 10 graded stone aggregate of 40mm 75mm cement concrete 1:2:4 (1 cement,2 sand: 4 graded stone aggregate of 20mm nominal

C/O Septic tank & soak pit

Excavation in foundation trenches etc. in earth work, lift upto 1.50mtr stacking the excavated soil not more than 3 mtr clear from the edge of excavated and then returning the stacked soil in 15cm layers, when required in to plinth, sides of foundations etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20mtr. (P J Work)

Providing and laying cement concrete 1:4:8 (one cement : four sand : eight graded stone aggregate) 40mm ) nominal size and curing compiete excluding cost of form work in foundation and plinth.

Providing and laying Reinforced cement concrete work 1:1.5:3 and curing complete excluding the cost of form work and reinforcement work in:-

Foundation footing bases of columns and the like mass concrete.

Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mm and removal of the same for in situ-reinforced concrete and plain concrete work in:

Flat surfaces such as soffits of suspended floors, roofs, landing and the like

Vertical surface such as walls (any thickness) partitions and the like including pilasters, butresses, plinth and string courses and the like aith in all leads and lifts as per the direction of Engineer-in-Charge

Brick work using second class common burnt clay building bricks in cement mortar 1:4( 1 cement : 4 sand) and curing complete .

In foundation and plinth.

20mm thick cement plaster with cement mortar 1:4(1 cement:4 sand) in single coat on fair side of brick/concrete/stone walls for interior plastering all heights including arises, internal rounded angles chamfers and/ or rounded angles in all girth and finished even and smooth i) Upto floor two level

Providing 200 mm wide CI rungs with channel or ribed non slip surface including fixing in man hole with 200x100mm Cement Concrete 1:3:6 ( one cement :3 Sand : 6 Graded crushed stone agg.20mm nominal size)

Supplying and fixing cast iron cover with frame for man holes for frame of internal dimension 455x610mm (Four hundred fifty five into six hundred ten millimetres rectangular cast iron cover (light duty single seat pattern-I) the weight of cover should not be less than 23kg

Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete upto floor two level.

Boulder filling under floor with hard stone, with at least one broken face, hand packed properly.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressures not less than 4.5 kg/Sqm i/c filling the joints with approved adhesive complete. (110mm dai pipe)

C/O Rain Water harvesting tank

Excavation in foundation trenches etc. in earth work, lift upto 1.50mtr stacking the excavated soil not more than 3 mtr clear from the edge of excavated and then returning the stacked soil in 15cm layers, when required in to plinth, sides of foundations etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as a directed with in a lead of 20mtr. (P J Work)

Providing and laying cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate) 40mm ) nominal size and curing compiete excluding cost of form work in foundation and plinth.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ-reinforced concrete and plain concrete work in:

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like

Providing and laying Reinforced cement concrete work 1:1.5:3 and curing complete excluding the cost of form work and reinforcement work in:-

Foundation footing bases of columns and the like mass concrete.

Walls (any thickness but not less than 0.10 meter thickness) including attached pilasters buttresses,plinth and string courses etc. from top of foundation level up to floor two level.

Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor two level.

Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete upto floor two level.

20mm thick cement plaster with cement mortar 1:4(1 cement:4 sand) in single coat on fair side of brick/concrete/stone walls for interior plastering all heights including arises, internal rounded angles chamfers and/ or rounded angles in all girth and finished even and smooth i) Upto floor two level

Boulder filling under floor with hard stone, with at least one broken face, hand packed properly.

Supplying and fixing cast iron cover with frame for man holes for frame of internal dimension 455x610mm (Four hundred fifty five into six hundred ten millimetres rectangular cast iron cover (light duty single seat pattern-I) the weight of cover to be not less than 58kg

Providing and laying of galvanised mild steel tube (LC) for inlet ,outlet ,scour pipe as per the direction of Engineer-in charge.

20 mm nominal diameter

40 mm nominal diameter

Providing and Fixinng Submersible Pump/Tullu Pump of 2HP capacity along with complete fittings.

Providing& laying no fine concrete 1:4 based on cement concrete 1:2:4 with 20 mm nominal size Complete in all respect. With in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing wheel brass full way wheel valve of superior quality of various dia and class as per the direction of the Engineer-in-Charge.

20 mm dia nominal diameter

40 mm nominal diameter

C/O Boundary wall

Excavation in foundation trenches etc. in earth work, lift upto 1.50mtr stacking the excavated soil not more than 3 mtr clear from the edge of excavated and then returning the stacked soil in 15cm layers, when required in to plinth, sides of foundations etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20mtr. (P J Work)

Providing and laying cement concrete 1:4:8 (one cement : four sand : eight graded stone aggregate) 40mm ) nominal size and curing compiete excluding cost of form work in foundation and plinth.

Providing and laying composite stone masonry with stone facing chisel dressed stone one line dressed in cement mortar 1:4 and building bricks in cement mortar 1:4 on inner face of wall including centering, shuttering and propping complete up to floor level.within all leads and lifts complete as per the direction of Engineer-In-Charge.

In boundary wall

Steel work in single sections including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint in :- grating , framed guards, bars ,ladders, railing, brackets and similar works.

Providing barbed wire made of G.I. wire 5 mm thick fencing including fixing with with angle iron fencing posts complete with in all leads and lifts as per the direction of the Engineer- in- Charge.

Supplying and fixing of surface mounting T5 luminaries with powder coated CRCA sheet steel housing mirror optics reflactor, electronic ballast , decorative end caps, suitable for 28 watts FTL (T5) conmplete with all accessories including connections, testing and commissioning etc. as required 2x28 watt FTL (T5) catagory-A

Prov. Water Supply and Sanitary Installations

P/F vitreous china water closet squatting pan 580 mm size..Orrissa Pattern

Providing and fixing white vitreous china wash down water closet (European type W.C.pan) withintegral 'P'or 'S' trap including jointing the tap with soil pipe in CM 1:1 of Parryware / Hindware/ CERA,( seat and cover to be measured and paid for seperately)

Anglo Indian Universal Closet

Providing and fixing 100mm (One hundred millimetres) size P or S trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( One cement : One sand) sand cast iron.

Providing and fixing 10/12.50/15 liters vitreous china low level flushing cistern with a pair of C.I. or mild steel brackets complete with fitting such as lead valve with polythene float C.P brass handle, unions and couplings for connecting with inlet, outlet and overflow pipes 40mm dia. C.P flush bend including cutting holes in walls and making good the same and connecting the flush pipe with cistern and closet ( over flow pipe to be measured and paid for separately ) 10.00 liters. of Parryware / Hindware/ CERA

Providing and fixing plasic seat(solid/Hollow type) and cover for wash down water closet with C.P. brass and hinges and rubber buffers solid type White plastic seat of Parryware / Hindware/ CERA.

Providing and fixing china wash basin with singl hole for pillar trap with C.I. or M.S. brackets painted whie including cutting holes and making good the same with excluding fitting fla back 630mm x450mm of Parryware / Hindware/ CERA.

Providing and fixing C.P. brass waste for wash basin or sink 32mm dia of Jaquar /JAL make.

Providing and fixing china pedestal for wash basin complete recessed at rhe black for the reception of pipes and fittings of Parryware / Hindware/ CERA make .

Providing and fixing 32mm dia lead waste pipe for wash basin or sink including brass check nut. of Jaquar /JAL make.

Providing and fixing 600mm x450mm beveled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood and fixed to wooden plugs with C.P. brass screws the washers.

Providing and fixing C.P. brass towel rail complete with CP brass brackets fixed to wooden plugs with C.P. brass 650x20mm of Jaquar /JAL make..

Providing and fixing 600x120mm glass shelf with C.P. brass brackes and guard rail complete fixed o wooden plugs with C.P.brass screws of Jaquar /JAL make..

Providing and fixing chromium plated brass soap dish with C.P. brass bracket fixed to wooden cleats with CP brass screws complete of Jaquar /JAL make..

Providing and fixing 15mm dia C.P. brass pillar tap with capstan head of Jaquar /JAL make..

Providing and fixing C.P. brass bib tap with capstain head 15mm dia of Jaquar /JAL make..

Providing and fixing C.P. brass angle cock 15mm dia without nuts and pipe complete of Jaquar /JAL make..

Providing and fixing PVC connection pipe with unions 45cm. Long and 15mm.nominal bore of Jaquar /JAL make...

Providing and fixing brass full way valve with wheel 15mm dia without nuts and pipe complete of Jaquar /JAL make...

i) 15 mm dia

ii) 20mm dia

Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc.

i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing PVC single equal branch with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc.

i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing PVC double equal branch with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc.

i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing PVC Collars ISI Marked including fixing with approved adhesive etc.

i) 75 mm nominal size

ii) 110mm nominal size

Providing and fixing PVC Plain bend ISI Marke including fixing with approved adhesive etc.

i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing PVC Cowl including fixing with approved adhesive etc.

i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing stone ware gully trap grade-A complete with C.I. grating brick masonry camber in cement mortar 1:5 ( 1 cement: 5 sand) C.I. cover with frame 300x300mm size wt. of cover should not be less than 4.53 kg. and frame 2.72 kg..

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (midium grade) tube fitting and clamps including making good the wall ceiling and floor.

15 mm nominal bore.

20 mm nominal bore.

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved adhesive etc.

i) 75mm nominal size

ii) 110mm dia nominal size.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. pipes embeded in and including cement concrete blocks 10x10x10cm. Of 1:2:4 (1 cement : 2 sand : 4 stone graded stone aggregate 20mm nominal size) and cost of cuting holes and making good the wall etc. 100mm diameter for C.I. pipe.

75mm dia meter

100mm dia meter

Providing and fixing 75mm PVC floor trap ISI marked of self f cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etc. complete.

Providing and placing water tank of make sintex having of capacity of 2000 ltr. With necessary fittings including over flow pipe etc. and ball valve with cover and locking arrangements including make of required size for inlet and outlet and inside paint in of good quality complete including hoisting complete in all respect.

Providing and fixing 100mm sand C.P. grating for gully floor Cera /Hindware make.

Providing and fixing CP brass Jet Jaquar/Jal make with connection pipe and other fitting for (European Type) WC pan complete.

Providing and fixing high pressure PVC pipes ISI marked including fixing with approved adhesive etc.

i) 150mm nominal size

Providing and fixing white vitreous china bowl pattren urinal i/c connection the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid for separately) Flat back type size 430x260mmx350mm size white in colour

Providing and fixing automatic flushing cistern with a pair of C.I. or mild steel brackets complete with fitting suchCI syphonic apparatus mosquitos proof ld CP brass union , unions and couplings for connecting with inlet, outlet and overflow pipes 40mm dia. C.P flush bend including cutting holes in walls and making good the same and connecting the flush pipe with cistern and closet ( over flow pipe to be measured and paid for separately ) 10.00 liters.

Providing and fixing Division plate for urinals 600mm x 30mm vitreous china Cera /Hindware make.

Providing and fixing of KENT supreme RO UV UF Mineral purifier with storage tank capacity of 15 Ltr. To give user clean And safe drinking water with higher concentration through film tech 1812-75 GPD and the purification capacity tested on ra water shall be with TDS level of 750 PPM. The UV lamp shall be 11 watt the main filter used in this water purifier shall be sediment activated carbon, post carbon and carbon block including all accessories including installation charges with six month warranty as per the direction of Engineer-n-charges

Providing and fixing water cooler Usha 20 ltr. Stainless steel 2020-SS water cooleer (ISI Marked). The cooler shall be desined for grater safty and operational conveniuns, having low power consumption and the quality of grooved copper tubes and having high effeciency compressor, blue fins on condencer coil give the cooler a long life. it must be enviorment frendly and new age refrigant. the body material must be rugged stainless steel/galvanised steel with float valve, adjustable padestal and other cpmponents complete including installation at site as per the direction of the Engineer-in-Charge.

Prov. Electric Insttallation etc.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. cable :Havells, L & T and switches Anchor ,SSK make

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Havells, L & T and switches Anchor ,SSK make

Group C.

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.make Anchor ,SSK.

S.P. 5/ 6 Amps one way switch, piano type.

5 pin 5/ 6 Amps socket outlet, porcelain base/ piano type.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required..make Anchor ,SSK

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required..make Anchor ,SSK

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.Make L&T,Havells,Finolex

2x1.5 Sq. mm.

2x4 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.Make L&T,Havells,Finolex

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.Make L&T,Havells,Finolex

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Make L&T,Havells,Finolex.

Providing, Installation, testing and commissioning of K.Lite make Glazed LED 22 Watt Batten Cat. No. 1595 22 W LED T-5 TL High quality design aluminum extruded decorative end caps or its equivalent as per best satisfaction of Engineer-in-charge .

Supplying and fixing Surface mounting Bema LED down lighters (Square) polycarbonate diffuser (chrome finish frame) 16 watts K.Lite make Cat. No.7325 complete with connections etc. as required.

Supplying and fixing Surface mounting Bema LED down light round 10 watt k-light make Code No. 7665 complete with connections etc. as required..

Supplying and fixing Recess mounting LED.10 watts "DIVYA ROUND"Low height backlit round LED downlight with non integral drive k-lightmake Cat.No.7665 complete with connections etc,as required.

Supplying and fixing Recess mounting LED.18 watts "DIVYA SQUARE" Low height backlit SQUARE LED downlight with non integral drive k-lightmake Cat.No.7669 complete with connections etc,as required.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Havells velocity,Bajaj ultima,Usha technix

Ceiling Fan 1200 mm sweep, Havells make Category-A

Ceiling Fan 1400 mm sweep,Havells make Category-A

Supplying and fixing of Exhaust fan (Plastic) with Louver shutter 300mm 1000RPM `1125 Air Delivery (CMM) Bajaj make DDxl Model on the existing opening complete with connections etc. as required.Bajaj,crompton,Greaves.

Supply and fixing exhaust fan lower shutter for 300/380mm exhaust fan on the existing wall painting etc. as required.

Providing/installation modern computer clectronic and digital input device usually a keyboard and mouse. The display screen, printer or other devices with latest specifications complete in all respects as per the directions and to the entire satisfaction of the Engineer-in-charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-Bajaj,crompton,Greaves

Exhaust Fan, Heavy duty, (Domestic) 300 mm sweep

Supplying and fixing of LED 24 watt bulk head fitting "Frontier Half frame" Model K.Lite/Philips make code No. 4038 complete with all accessories including making connections, testing etc. as required.

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required. Anchor,SSK.

Telephone socket outlet, piano type.

Supplying and fixing Computer board, comprising 3Nos. of 5 amp. switches and 3 nos 5 amp socket and 0ne no metal box 200 X 250 X 100 mm deep , 1 No metal box size 100x100x60mm deep ,1 No phenolic laminated sheet size 200x250mm (i.e of size 8"x10")one No phenolic laminated sheet size 100 x100mm (i.e 5"x5") 3 mm thick and 1 No computer Jack with shutter including connections etc as required complete in all respect.MAKE :- Anchor,SSK.

Providing, Installation, testing and commissioning of K-Light/Philips make mirror light LED 10 Watt TL Cat. No. 1597 Modern surface mounting Luminaire two traditional down light solutioin the fixiture and the driver are designe to provide value technology idealy suited to Indian condition or its equivalent as per best satisfaction of Engineer-in-charge as per price list K-light Jan 2018 as required complete in all respect.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-

300 mm deep (nominal)

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing and fixing 25mm x 5mm copper strip in 40 mm dia. G.I. pipe from earth electrode etc. as required.

Prividing/installation of Laser Jet pro M11-M13 series computer printers. The equipment shall be tested and fount to compile with the limits for a class B digital device persuant to part 15 of FC rules complete in all respects as per the direction of Engineer-in-Charge.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

S/F of 1.5 ton split type air conditioner as per Voltas Hot & Cold better start rating 2 virus safe filter triple filter e-saver mode white display auto clean anti bacteria filter jet cool on of timer slip mode compressure code less remote complete in all respect suitable to operate 230/240 volts + - 10% AC supply capable to perform the function of cooling dehuminification air circulation bantilation and fitting in the size of nominal cooling capacity complete with 4KBA auto matic voltage stabeliser whirl pool make cat No-DMC-LX-1640 confirming to ISI specification. The stabiliser should have high voltage trip and MCB high low voltage trip and time relay complete in all respect including carriage of material with in all leads and lifts.

S/F of 2 ton split type air conditioner as per Voltas hot and cold better start rating 2 virus safe filter triple filter e-saver mode white display auto clean anti bacteria filter jet cool on of timer slip mode compressure code less remote complete in all respect suitable to operate 230/240 volts + - 10% AC supply capable to perform the function of cooling dehuminification air circulation bantilation and fitting in the size of nominal cooling capacity complete with 5KVA auto matic voltage stabeliser whirl pool make cat No-DMC-LX-1650 confirming to ISI specification. The stabiliser should have high voltage trip and MCB high low voltage trip and time relay complete in all respect including carriage of material with in all leads and lifts.

Supplying and drawing LAN cable Cat 6 Finolex make,solid copper conductor protected with PVC Sheathed in Existing surface/recessed ,steel /PVC Conduit as required.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

Supplying & fixing metal box of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required:-

100mm.x100mm.x60mm. deep

Supplying and laying H.D.P.E.PE-80 PVC pipe 32mm dia Pressure dia in ground 1.00 Mtr. Below ground level for laying the wires/cable etc. as required.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-Havell,L&T.

Armoured cable 25 sq. mm (3.5 core)

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

supplying and fixing stair light Havells make as per Cat No-LHDL07150099 - 15 watt but excluding the cost CFL complete with testing and commissioning etc as required.

Supplying and fixing LED. Lamp 10 watts E-27 Havells make in the existing batten holder

LED 10WATT Retrofit

S/F Shock treatment chart on the existing wall etc as required including carriage of material within all leads and lift.

S/F rubber mat 1x2 meter long 12mm thick infront of main panel as required including carriage of material with in all leads and lift.

supplying and fixing Bulk head fittiing k-light make as per Cat No-4039 , 25 LED watt complete with testing and commissioning etc as required.

Supplying and fixing of Post top lentern LED 33 watts ,K light make cat No-OVIYA -CUTOFFProduct code No-4973 33 watt LED TR.

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 50 mm x 50 mm x 6 mm thick duly welded complete with 3mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required

Supplying and fixing of 4 pole DPX 250 MCCB Enclosure of Legrand make (Ekinoxe distribution board )with cat no-607945 etc as required complete in all respect.

Providinjg and fixing MS. Steel fabricated floor mounted closed almirah type pannel board including angle iron post of suitable size duly painted with steel sheet of 16 gauge including fixing of 6 Amp. To 32 Amp. MCB, single pole MCV 240 Volt including earthing double door 4 way,8way and 12 way, 40 to 63 Amp 10 k breaking circuit breaker of double pole, MCB 100 Amp. 10 kA,, 200 Amp. 16 K, Bus bar , copper strips , changeover switch of 63 Amp. three phase indicator andb ICTP switch etc. complete in all respects

Providing, supplying/fixing of corporate type office furniture

Providing, supplying/fixing of corporate type office furtinure/workstations of various sizes with modular partitions 60 mm thick and height varies from 750 mm to 1200 mm of various sizes suits at site complete as per the direction of Engineer-in Charge.

Provision for structural design & drawing (after acertining the safe bearing capacity of the site) the architecure drawing structural designs and drawings of all the building and all other other components and getting them approved from the competent authority.

Shashank Jagota Govt. Contractor

MNBN Enterprises