Construction of Entry Gate @ Jessore Wildlife, Iqbalgadh Range, Banaskantha Division

NAME OF WORK: Construction of Entry Gate @ Jessore Wildlife, Iqbalgadh Range, Banaskantha Division

Sr. No. Item Description QTY. Unit Total Rate Amount

Excavation for foundation up to 1.50 m. depth including sorting out & stacking of

useful material & disposing off the excavated stuff up to 50.0 m. lead etc.

Filling in plinth with sand under floors including Watering , ramming, consolidating

and dressing completed

Providing and laying cement concrete 1:3:6 (1-Cement : 3- Coarse sand : 6- graded

3 stone aggregates 20 mm nominal size) and curing complete Including cost of 5.87 Cu.m. 3,638.79

formwork in (A) Foundation and Plinth-PCC

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns and Mass

concrete.-Footing

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (D) Columns, Pillars posts and struts, upto floor two

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams,

Girders and Cantilever upto floor two level.-Slab

Providing and laying controlled cement concrete M.250 and curing complete

7 including the cost of formwork and excluding the cost of reinforcement for 15.86 Cu.m. 8,051.70

reinforced concrete work in (A) Plinth Beam & Slab Beam

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level (upto 10 ton)

Brick work using common burnt clay building bricks having crushing strength not less

9 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- Cement : 6 - 4.41 Cu.m. 4,214.33

fine sand)(B) Conventional - Foundation

Brick work using common burnt clay building bricks having crushing strength not less

10 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 - 32.98 Cu.m. 4,526.81

fine sand)(B) Conventional - Superstructure

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

11 or half brick walls for interior plastering upto floor two level and finished even and 190.33 Sq.mt. 165.02

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

P & L By Natural Stone (Rockface) Wall Cladding Tiles 15 mm thick , in skrting risers of

steps and dedo on 15 mm thick cement plaster 1:3 (1-cement : 3-coarse sand) on

12 New Surface and jointed with white cement slurry and jointed with color cement 126.34 Sq.mt. 3,297.65

slurry including finised with flush pointing & cleaning the surface etc. complete for

Providing and fixing 35 mm thick water proof flush door solid core double shutter

with 1mm thick laminated sheet on both side of the shutter having teakwood lipping

edge patti of 38 mm x 25.4 mm on all edges, including Indian teak wood frames

cm x 7 cm with Melamine Polish matching shade of laminate with Magnetic catcher

13 triple strip vertical type(2 Nos), S.S. 304 tower bolt (barrel type) 300x10 mm (2 Nos), 1.89 Sqm 2,601.00

Main door set handle 19mm dia x 150 mm SS 304 10 x 150 mm connector (2 Nos),SS

Hinges of 100mmX75mmX3.2mm (8 Nos) with necessary SS fixtures and fastenings

etc. complete all SS fittings to be of SS304 matt finish as directed by Engineer-in-

NAME OF WORK: Construction of Entry Gate @ Jessore Wildlife, Iqbalgadh Range, Banaskantha Division

Sr. No. Item Description QTY. Unit Total Rate Amount

Providing and fixing powder-coated aluminium domal section glass Window of

approved make and design, using standard aluminium sections of required size and

thickness, including vertical stiles, top and bottom rails, necessary glazing clips,

neoprene / EPDM gaskets, screws and fasteners, with 5.5 mm thick clear float glass /

14 approved type glass fixed with proper beading and sealant, complete with handles, 2.16 Sqm 5,111.61

tower bolts, floor spring, lock and other required accessories, as per drawing and

direction of the Engineer-in-Charge. The rate shall be for finished work per square

metre including cost of all materials, labour, tools, equipment, wastage, and

scaffolding, all complete.

Providing and fixing Granite Stone Jamb for door and windows of 18 to 20mm thick

and width as per wall thickness polished and cut as per required size of door/window

opeinings. Fixed to wall and lintle with adhesive and Hilti Frame anchor HRD-CR2

10x100 at 1000mm distance in vertical rames and 600mm distance in horizontal

frames. Jamb fixed to walls with Adhesive Material Kerakol Bioflex Flexible Mineral

Adhesive. as per instruction of site incharge complete

Steel work, welded in built up sections framed work including cutting, hoisting, fixing

in position and applying a priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of all dirt, dust and other

foreign matter.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and sand

papered smooth.

Wall painting (three coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including thoroughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth

Providing and fixing SLOTH BEAR , BEAR TWINS AND LEOPARD (STATUE OF

19 MAXIMUME STANDARD SIZE) ISI FRP Standard Materials including transportation and 1.00 LS 4,50,965.00

fitting charge of making necessary etc.

Providing and fixing electrical condutes, wiring and fixtures for Rest House. All

including labour and fixing material.

Add 1.50% Contigency Charge

I/am we/are willing to carry out the work at………………...% above /below………………….percent (should be written in figures and words) of the estimated

rates mentioned above. Amount of my/our tender works out as under.

* Estimated amount put to tender * Estimated amount put to tender

Deduct : % below Rs. Add : % Above Rs.

Net Rs. Net Rs.

In words In words

{* Strike whichever is not applicable.} {* Strike whichever is not applicable.}

NAME OF WORK: Construction of Entry Gate @ Jessore Wildlife, Iqbalgadh Range, Banaskantha Division

Sr. No. Item Description QTY. Unit Total Rate Amount

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In- Charge for which no extra

payment shall be made.

Credit Amount Rs. 0.00 for dismantling of materials shall be deducted from running account bill

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 GST and Income tax TDS will be deducted at a source while making payments of bills

5 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.