Construction of Two Wheeler parking shed at old block, NIFT Centre - Kolkata

Amount

Construction of Two Wheeler parking shed at old block, NIFT Centre -Kolkata

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Supplying, fitting & fixing Zn-Al alloy coated (followed by colour coated) steel sheet work having minimum yield strength of 550 MPA of trapezoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 10 mm. dia. J or L hook- bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (payment to be made on area of finished work) (i) in roof: - With 0.45 mm thick all complete

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) ---

12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m²

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Supply, installation, testing and commissioning of 20 Watt LED light fittings (T5/T8 type)

CIVIL CONSULTANT

M/S S A ENTERPRISE