Civil Work

Name of Work :- Estimate For Repairing Work of Padra Sub Division Ta.

Padra Dist. Vadodara

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Rates in Total

Civil works items

1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding 3 15.00 No. 187.52

2 Labour Work For Dismentle Existing POP In various Room

3 Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto 15.57 Cum 268.28

50 Meter lead.(B) Dense or Hard soil

4 Providing and laying cement concrete work 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal size) and

curing complete Including cost of formwork But Excluding The Cost Of 0.95 Cum 4188.47

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base or columns and Mass concrete .(For PCC)

5 Provinding and laying controlled cement concrete M -250 and

finishing smooth with curing etc complete, including the cost of

formwork but excluding the cost of reinforcement for R.C.C. work 2.51 Cum 4906.58

in(A) Foundations, footings, Base of Columns and Mass concrete.(For

6 Brick work using Common burnt clay building bricks having crushing

strength not less than 35 kg/sq.cm in Super Structure above floor Two

Level in cement mortar 1:6 ( 1 cement : 6 fine sand ) (B) Conventional.

7 Providing and laying controlled c.c. M.200 & curing complete including

the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Collumns, pillars, posts & struts upto floor

two level for FF

8 Provinding and laying controlled cement concrete M -250 and

finishing smooth with curing etc complete, including the cost of 1.36 Cum 6984.18

formwork but excluding the cost of reinforcement for R.C.C. work in

(A) plinth Beam

9 Providing and laying Controlled c.c.M.200 & curing complete including

the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs,landing,cantilevers upto floor two 0.75 Cum 6984.18

level for G.F. slab

10 Providing & fixing 35 mm thick Single shutter flush door solid core

finished with both side 1 mm thick laminationboth side like 'NOVAPAN

'or equivalent, of natural wood grain shade as approved by this office

having telephone blackgranite 18 mm thick frame with double stone

including fixed ventilation above lintle level as per drg and as per

theinstruction of Engineer in

Providing TMT Bar FE 500D reinforcement for R.C.C. work

includingbending, binding and placing in position complete upto floor 936.23 Kg. 77.29

12 Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto 18.43 Sq.mt 171.21

floor two level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand)

It. Description of Item Rates in Total

13 Providing 20mm thick cement plaster in single coat on single or half

brick walls for interior plastering upto floor two level and finishedeven 20.85 Sq.mt 218.49

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

14 Polymer Modified Mortar (up to 50mm) : Providing and Applying single

component, dual shrinkage-compensated, high strength, fibre

reinforced, thyrotrophic cementitious patch repair mortar that achieves

compressive strength minimum of 15 MPa at 1 day and 45 MPa at

days and capable of applying up to 50mm thick in single layer such as

, to the prepared concrete area FOR AVERAGE THICKNESS OF 49.00 Sq.mt 6622.57

60MM, after applying bonding coat if required as per manufacturer’s

specification, before the bonding agent becomes tack free, initially by

hand and finally finishing the same with trowel carefully compacting the

same around the rebar and finishing to bring it in line

15 Applying two coats of putty & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including 166.93 Sq.mt 40.59

thoroughly brushing the surface free from mortar dropping and other

Applyingmatter and sand

two coats papered

of putty smooth.For

& two Interiorof

coats of primer wall

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other 2.62 Sq.mt 42.72

foreign matter and sand papered smooth.

17 Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth. (Ceiling Paint) 166.93 Sq.mt 83.00

18 Providing and fixing window having extruded aluminum colour

anodized section frame main outer size 95mm x 24mm x 1.17mm (of

Jindal section no.2459 @ Wt. 0.738 Kg/mt), horizontal three track

member size 92mm x 31.75mm x 1.30mm (of Jindal section no. 8688, 25.20 Sq.m. 4956.07

@ Wt. 1.07 Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm

(of Jindal section no. 8933 @ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section

19 Providing and fixing M.S. grills of required pattern to

wooden/Marble/Granite/Stone frames of windows etc. with M.S. flats

at required spacings and frame alround, square or round bars with 661.50 Kg. 128.27

round headed bolts and nuts or by screws (A) Plain grill

20 Providing and fixing Aluminium partition sytem made from Powder

coated aluminum section of 95 x 24 x1.17 , 127 x 38.10 x 1.35 and

other section which is necessory including 5 mm th. Glass fitting with 49.84 Sq.mt 2541.16

beading clip having single side film for vision barrier and bottom panel

with pvc sheet as per design and all the joint filled with silicon

21 Providing and laying Vitrified tiles 8 to 10 mm thick , 24''x 24'' in flooring

treads of steps and landing laid on abed of 12mm thick cement mortar

1:3 (1-cement :3-coarse sand ) finishing with flush pointing in white

22 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

It. Description of Item Rates in Total

23 Preparing & supplying the Designer Executive table with shelfs cabinet

made from variety of ply as per design & diamension, made with

various size of ply (i.e. 12mm,19 mm ,6mm , 25mm ,18 mm)and finish

with light shade Laminate of Indian Teak and other combination having

thickness 1 mm and inner of 0.8 mm and all joint chamferd proper and

fill with putty and appropriate color and top glass of 8 mm tuffen glass

with bevelled edge, Side cabinet have 3 drawer and 2 shutter including 1.00 No. 25000.00

all standard Hardware, Fixtures and labour complete. shades, material,

hardware selection & fixing as per directed by Engineer Incharge.

structure : 25 mm, 19 mm plywood (green, surya , sagun Duro or Equi.)

Laminate : Greenlam, Century, Meriolam Or Equi. Hardware :

Hettich,Godrej, Haffle or Equi. SIze (Main Table 6 x 2.5 Feet) (Side

Table 4 x 2 Feet)

24 Revolving Chair :- Full-Back Executive Office Chair upholstered in

bonded net/mess and cloth type seat back for all-day comfort and

support, Pneumatic seat-height adjustment; 360-degree swivel; smooth-

rolling casters and having overall dimension 73.9D x 65W x 115.6H 2.00 No. 11000.00

Centimeters with Armrest and head rest (Black) with selected brand.

25 Visiting Chair :-Non-Revolving and Non-Tilting chair with Armrest

Seater Visiting Chair of Moulded Plywood type Seat Material &

kg/Cub Meter density of polyurethane foam used in backrest. seat

materail thickness is 12mm, & having overall dimension Is390 D X

B X 435 H MM, backrest width is 350mm & backrest height from seat

is 300mm with suitable Brand which will select by enginner

26 Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on

the Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value

of0.75 NRC or equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per Sq.mt including

both side) consisting of main ‘T’ runner suitably spaced at joints to get

required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 57.33 Sq.m. 1674.15

24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre to centre to form

agrid of 1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a perimeter wall

angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm centre to centre

with 25mm long dry wall screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/Cosmos/Spintone) in the grid

including, cutting /making opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’

27 Providing and fixing factory made “KAKA” sintex , tata, or equivalent

Brand PVC wall panel manufactured by m/s KAKA Industries Limited,

made of wall panel work is done with three different with wall thickness

1.0mm named as ‘C’ (bottom), ‘U’ (patti), and ‘L’ (corner). The,

complete frame work is supported by PVC Pipe. ‘L’ angle from the roof

and ‘L’ section is fixed all around the wall. 6mmx250mm pvc panel are

fixed with screws on ‘U’

It. Description of Item Rates in Total

28 Providing and fixing the name Panel Board made from Color finish MS

frame structure and Plywood, finish with laminates,also The name plate

of indivisual made from SS CNC cutting in predetermined Design and 0.50 Sq.m. 10100.00

all items must be executed as Per directed by Engineer Incharge.

29 Providing erecting and fixing double coated ISI water tank of

requiredcapacity each with all necessary fittings and connection etc.

completeon terrace 3000.00 Liter 3.95

30 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100mm

diameter with jali of the following nominal diameter of selfcleansing

design with C.I scread down or hinged grating including thecost of 5.00 No. 572.32

cutting and making good the walls.

31 Providing and laying wash down water closet ( european type

WallHung WC pan ) Florentine series FLS-WHT 0111B including

providing and fixing metropole Flush cock seat cover, jet wash etc

complete unit of jaquar Branch ( or equvalant ) including installing and

fitting as per manufacturers standards by skilled trained plumber

32 Providing and fixing ball cock of approved quality as directed.(A)

Copper metal(i) 25 mm dia.

33 Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE

/SUPREME/ ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of 20.00 Rmt. 91.84

clamp at every two metre C/C or shall be concelled as directed

34 Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE

/SUPREME/ ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of 27.00 Rmt. 148.12

clamp at every two metre C/C or shall be concelled as directed

35 Providing and fixing Gun metal check or non-return fullway wheel

valve.(E) 40mm dia. 4.00 No. 663.43

36 Providing and fixing Gun metal check or non-return fullway wheel

valve.(E)25mm dia. 4.00 No. 420.63

37 Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(ii) 25mm

38 Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts.

(ii) 20mm dia 1.00 No. 354.69

39 Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good

the same but including fittings.(A) Vitreous China:(ii) Flat Back 1.00 No. 6333.71

washbasin 560 mm x 410mm x 200mmsize.

40 Providing and fixing C.P.Brass towel rail complete with C.P.Brass

brackets fixed to woodenplugs with c.p.brass screws.(B) 600 mm x 20 1.00 No. 616.42

It. Description of Item Rates in Total

41 Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735- 22.50 Rmt. 856.03

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed

42 Constructing brick masonary chamber for under ground C.I.inspection

chamber and bends with bricks having crushing strength not less

than35 kg/sq.cm in C.M.1:5 C.I.cover with frame ( light duty) 455 mm x

610 mm internal dimension total weight of cover with frame to be not

less than 38 kgs.(weight of cover 23 kg and wt.of frame

kg)R.C.C.top slab with 1:2:4 mix ( 1 cement:2 coarse sand:4 graded

43 stone aggregates

Providing 20 mm size)

and Installation foundation

of Curtain as perconcrete

directed1:5:10 inside and

i.e. Rs. fifty-five thousand, four hundred twenty-four And Ninety paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as

directed and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Executive Engineer

Panchayat (R & B) Sub Division, Officer Panchayat (R & B) Division,

Karjan Panchayat (R & B) Division, Vadodara