enewal of Painted Service Road from Km. 10.000 to Km. 11.000 of Gambhirwa Minor

WBM Grade-III Providing and Laying, spreading 10cm Loose (after compaction 7.50cm) approved stone aggregate of 53-22.40 mm gauge size to water bound macadam Grade-III specification including spreading in uniform thickness, hand packing, rolling smooth wheeled roller 80-100 Kn in stages to proper grade and Camber, applying and brooming 11.2mm size stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Techincal clause 405. But excluding Cost of GST.

Prime Coat Providing and applying primer coat with bitumen with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spreying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Sepecifications clause 502. But excluding GST

Tack Coat Providing and applying Tack coat with bitumen VG- 10 Using distriutor at the rate of 0.35 kg to 0.45 kg per sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom As per Technical Sepecifications clause 503. But excluding Cost of GST.

Open Graded Premix Surfacing Providing, Laying and rolling of open graded premix carpet of 20 mm. Thickness composed of 13.2 mm to 5.60 mm aggregate either using penetration grade and level to serve as wearing course on a previously prepared base including mixing in suitable plant, laying and rolling with a three wheel roller 80-100 Kn static roller capacity, finished to required level and grades to be followed by seal coat of Type B as per Technical Specification clause 508. But Excluding cost of GST.

Seal Coat Type "B" Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type-B as per technical specifications 510. But Excluding Cost of GST

Brick Edging Brick edging on both sides of roads of 1st class bricks including supply of bricks finished to required templete and in proper alignment for proper completion of work.