Modernization of Researchers room and paneling works infront of cold room at KFRI Peechi.

Amount

Providing and fixing Thomson Multi wood board or equivalent make paneling 18mm thick to frame, 9mm thick for backing or studding with screws, the exposed edges shall be sealed with PVC edge beading of same shade and colour, including topping and sides with 2mm thick mica of approved brand and colour to get smooth finishing and asthetic look. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, and powder coated telescopic drawer channels with necessary screws as required .Use necessary magnetic catchers, locks, handle etc wherever required.Use machine pressing for mica fixing.( Measurements are to be taken in sqm front length and height.)( For Computer table for students area)

Providing and fixing Thomson Multi wood board or equivalent make paneling 18mm thick to frame, 18mm thick for backing or studding with screws, the exposed edges shall be sealed with PVC edge beading of same shade and colour, including topping and sides with 2mm thick mica of approved brand and colour to get smooth finishing and asthetic look. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, and powder coated telescopic drawer channels with necessary screws as required (files are to be keep in hanging position in storage space or side cabins fix inside system accordingly).Use necessary magnetic catchers, locks, handle etc wherever required.Use machine pressing for mica fixing.( Measurements are to be taken in sqm front length and height.) ( For file keeping racks Ground level)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fastners of required dia and size including necessay filling up the gaps at junctions ie at top, bottom and sides with required EPDM rubber /neoprene gasket etc. Aluminum sections shall be smooth rust free, straight, mitred and jointed mechanically wherever reqquired including cleat angle, Aluminium snap beading for glazing/ paneling C.P brass/ stainless steel screws all complete as per architechural drawings and the directions of Engineer in charge. Powder coated aluminium (minimum thichness of powder coating 50 micron)with 4mm thick aluminium composit panel EPDM rubber / neoprene gasket combosit panel of 4 mm thickness etc. (kitchen cabinet model frameless work, steel colour frame work and sheet) Complete as per direction of Engineer incharge.

Supplying and fixing vertical blinds of standard size and pattern ( as approved by concerned official in charge) including necessary aluminium channels, and accessories , cost of all materials, labour ect. Complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work of powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge with necessary screws etc complete.

St.Joseph Engineering Works