Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 CrAccepted-AOC C O LT BASANTA TALUKDAR WARD NO 3 DIPTI NAGAR PO PS RANGIA KAMRUP ASSAM PIN 781354 | RANGIA | KAMRUP | ASSAM | 781354 | ₹2.5 Cr | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹2.5 Cr+₹1.7 L (0.68%)Rejected-Finance C O BACHH RAJ BUCHA WARD NO 1 NT ROAD PO PS KHARUPETIA DARRANG ASSAM PIN 784115 | KHARUPETIA | DARRANG | ASSAM | 784115 | ₹2.5 Cr+₹1.7 L (0.68%) | L2 | Rejected-Finance L2 Bidder |
Tender Value
₹2.3 Cr
EMD Value
₹4.5 L
Closing Date
15 May 2025, 2:00 pmClosed
Chairperson/Executive Officer
O/o of The Chairperson/Executive Officer, Dhekiajuli Municipal Board, Lachit Complex, Dhekiajuli
Work of providing ceiling, D.G Generator set, A.C., Fire Hydrant System and furniture etc at the newly constructed Town Hall for Dhekiajuli Municipal Board, Dhekiajuli in Sonitpur District under 15th Finance Commission Untied Grant for the year 2nd I
2025_UDD_44079_1
DMB/PW/15FC/2025/2730
Open Tender
Civil Works - Others
Item Rate
O/o of The Chairperson/Executive Officer, Dhekiaju
Please refer Tender documents.
3 documents required · 3 mandatory
₹4,500
Yes
₹4.5 L
Yes
O/o of The Chairperson/Executive Officer, Dhekiaju
17 Jun 2025
25 Apr 2025
15 May 2025
3 May 2025
15 May 2025
8 May 2025
3 May 2025 - 15 May 2025
5 May 2025
Amount
(A) Civil Works :-
12.45 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at ...... specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming
Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit ..... carrier and in direction perpendicular to it at 600 mm 12.54.2 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
(B) : Installation of Fire Hydrent System :-
M.S. Pipe to I. S 1239 (medium class) complete with full fitting like, union, coupling, bends, elbows, tees, offsets, reducers, flanges, ... to complete the work ... and making good the walls complete. 100 mm dia
M.S. Pipe to I. S 1239 (medium class) complete with full fitting like, union, coupling, bends, elbows, tees, offsets, reducers, flanges, ... to complete the work ... and making good the walls complete. 80 mm dia
M.S. Pipe to I. S 1239 (medium class) complete with full fitting like, union, coupling, bends, elbows, tees, offsets, reducers, flanges, ... to complete the work ... and making good the walls complete. 50 mm dia
M.S. Pipe to I. S 1239 (medium class) complete with full fitting like, union, coupling, bends, elbows, tees, offsets, reducers, flanges, ... to complete the work ... and making good the walls complete. 50 mm dia
Providing 15 mm dia type chromium plated brass side type sprinkle head with quartized bulb and set to operate at 68 degree. Complete in all respect.
Supply of first aid fire hose ree wall mounting, swinging type fitted with 25 mm dia ms pipe connection with jyoti or equivalent make 20 mm x 30 mtr rubber.... Nozzle with shut off valve ( Make : Newage, Andex)
Supply of Hydrant valve conforming to IS 5290 with 63 mm dia instantaneous female coupling on the out let with blank cap and chain ..... Complete as per specification ( Make Newage, Andex)
Supply of 63 mm dia 15 mtr long RRL horse including male and female instantaneous type coupling, machine, wrounded with copper wire .... And coupling to IS 903-1975 (ISL Make : Newage, Andex)
Supply of standard short size Brance pipe with nozzle 16 mm dia . Outlet with standar instantaneous type 63 mm dia coupling (ISI marked).
Supply of action air release valve with srewed inlet 25 mm dia.
Supply of horse cabinet 660 (W) x 250 (D) x 450 (H) as per sample approved . The construction of the cabinet to be in 18 G sheet with red colour powder coating.
Supply of CI butterfly valves PN 1.6 complete with bolt , nuts 3mm thick compressed gasket, companion, flanges etc. Complete.100 mm dia
Supply of CI butterfly valves PN 1.6 complete with bolt , nuts 3mm thick compressed gasket, companion, flanges etc. Complete.50 mm dia
Supplying of cast iron body non-return valves complete with matching flanges , rubber insertion , nuts, bolts and washer etc. (IS: 5312) of following sizes. 100 mm dia
Supply of ISI marked 9 ltrs AFFF type fire extinguisher (Near DG set and car parking)
Supply of 2 way fire bridge outlet connection of cast iron body with 2 nos. Gun metal male instantaneous intal coupling complete with cap and chain .... Conforming to IS : 904 as required :
Supply of ball valve
Supplying of the electric driven main fire pump set for hydrant and sprinkler system suitable for manual / automatic operation as per specification as required (5 HP)
Dolo starter for pump ( Lubi)
Water tank capacity of 2000 litre
Installation, testing and commissioning charge of Hydrant and Sprinkler system.
(C ) Furniture :-
Model : Godrej Venus I Frame Auditorium Chair
Model : Godrej Pisa 3 seater sofa
Model : Godrej Pisa 2 seater sofa
Model : Godrej table S-1071
Model : Godrej Greta 2.0 Full back chair
Model : Oxbo visitor chai
Model : Storewell plain Almirah
Model : Slimline 2 door with mirror (Alkmirah)
Wooden chair (For stage)
Wooden chair (For non stage)
Wooden table (42" x 72")
Wooden podium (Lecture table)
(D) Carpeting Work :-
Providing carpet including fitting and fixing.
(E) Electrical Work:-
supply, installation and commissioning of 250 KVA , 3 Phase, Capacity of Engine (cc) 8860, Rated Engine Power (kWm) - 100 % of the required powered at STP(Standard Temperature Pressure) i.e equal to (Nominal Rated Capacity (KVA) of power generator + Any Auxilary power Consumption by the Power generator) x Power factor(0.8) / Alternator eìcience Type of Engine cooling - Liquid Cooled, Type of governer - Electronic, Number of cylinders (nos) - 6, No of Strokes (nos) - 4, Rated RPM of Engine (RPM) - 1500, Fuel High Speed Diesel (HSD) - Overload capacity Engine is capable of delivering an output of 10% in excess of rated KVA for a period of one hour in any period of 12 hours continous running SpeciÒc, Fuel Consumption (gm/kWh) - 200 to 265, Starting voltage (volt) 24, Salient Features of Engine - Turbo Charged Engine,Direct injection Fuel System, with AMF Panel etc. Disel Generator.
Supplying of UG Aluminium Cable 120.00Sqmm 3 & 1/2core . Make - Avocab
Supplying of UG Aluminium Cable 300.00 Sqmm 3 & 1/2core . Make - Plaza
(DSR 7.1) Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (DSR -7.1.3) Above 95 sq. mm and upto 185 sq. mm
(DSR 7.1) Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (DSR - 7.1.4) Above 185 sq. mm and upto 400 sq. mm
Supplying of Square (2 X 2) LED Surface Ceiling Light . Make - Ascentech
Supplying of Circular LED Surface Ceiling Light 18 W . Make - Ascentech
Supply, Installation, Testing & Commissioning of Voltas Make Package AC Units Voltas Make Package tpye AC of Capacity 17 TR suitable for refrigerant ( R-410A)
Rectangular duct with Class-VIII GI Sheet along with necessary supports, flanges, labour part etc. as required and as per IS 655 standards of following gauges. (Mk-TATA/SAIL/AARTI) 24 SWG
Rectangular duct with Class-VIII GI Sheet along with necessary supports, flanges, labour part etc. as required and as per IS 655 standards of following gauges. (Mk-TATA/SAIL/AARTI)22 SWG
13 MM thick al foil face nitrile rubber insulation with necessary adhesive, tape etc.
Acoustic Insulation of duct with 12mm thick Rigid board glass wool (Density 48Kg/cum) covered with 32G Al.Perforated Sheet.
Supply & Errection of 18G GI duct damper
Supply and laying of Communication cable between IDU & ODU ( 6C x 1.5 Sqmm)
Supply and errection of Hard Drawn Copper refrigerant pipe for Suction line with nitrile rubber insulation and necessary elbow socket and ancilary items for Ductable Split AC
Supply and errection of Hard Drawn Copper refrigerant pipe for liquid line with nitrile rubber insulation and necessary elbow socket and ancilary items for Ductable Split AC
Supply and laying of PVC drain pipe of 25/32 mm with insulation and necessary supporting elements
Aluminium powder coated supply air grill / diffuser with Volume Control damper
Aluminium powder coated return air grill / diffuser without Volume Control damper
Supply & Top up of refrigerant ( R-410A)
Supply & errection of Indoor & Outdoor platform
Supply, installation, testing & commissioning of Conventional type Microprocessor based fire alram control panel suitable for wall mounted type with audio visual indication with audio visual indication zone i.e.rectifier and charger circuit and maintenance free battery of 2x12 volt with suitable Ampere hour capacity complte panel. Make - AGNI
Supply, installation, testing & commissioning of Conventional type Optical Smoke detector with mounting base. Make - AGNI/SYSTEM SENSOR
Supply, installation, testing & commissioning of Conventional type Manual Call Box made of M/S Aluminium Dia Cast with epoxy coated paint with hamer & chain. Make -AGNI/SYSTEM SENSOR
Supply, installation, testing & commissioning of Conventional type Fire Alarm Hooter with audible range of 25 metre 80bb output complete. Make - AGNI/SYSTEM SENSOR
Supply, installation, testing & commissioning of Conventional Beam Detector with Reflector.
Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built - In pressure Gauge to know the Readyness of the Extinguisher Squeeze Grip Handle Asper IS: 15683 with ISI Mark (06 kg capacity)
Supply, Installation, Fixing of Carbon Dioxide Fire Extinguisher confirming to IS : 15683 with ISI Mark (4.5) Kgs.
(DSR 2022) No.17.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
DEEPAK KUMAR BUCHA (BID ID -268318)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .