Replacement of old dilapidated qrs. with Standard staff quarters in colony No. 12 at Ludhiana and Sanehwal. (8 U T-II & 2 U-T-III) in colony No. 12 at LDH ( 4 U T-II & 2 U T-III ) at SNL under ADEN/LDH.

Item Breakup - A-DSR-2021

88 mm, weighing not less than 170 gms Total 616489.80 Item- 13 CHAPTER-18.0) WATER SUPPLY S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, 18.4 including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. -Internal Exposed on walls 1 18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 696 254.95 177445.2 FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded 18.5 polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer- in-Charge. -Concealed work,including cutting chases and making good the wall etc. 2 18.5.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 360 501.6 180576 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 3 18.15.1 15 mm nominal bore Each 40 303.85 12154 Providing and fixing brass stop cock of 18.16 approved quality : 4 18.16.1 15 mm nominal bore Each 76 303.85 23092.6 5 18.16.2 20 mm nominal bore Each 40 327.95 13118 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.2 45 cm length 6 18.21.2.1 15 mm nominal bore Each 48 85.2 4089.6 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 10000 9.7 97000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 7 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS 18.50 standards and weighing not less than 810 gms. 8 18.50.1 15 mm nominal bore Each 28 715.05 20021.4 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS 18.51 standards and weighing not less than 690 gms. 9 18.51.1 15 mm nominal bore Each 24 708.4 17001.6 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 10 18.52.1 15 mm nominal bore Each 24 594.75 14274 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 11 18.53.1 15mm nominal bore Each 24 500.35 12008.4 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15mm nominal bore, 86 mm long, weighing Each 108 109.85 11863.8 12 not less than 88 gms Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 13 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 28 45.25 1267 FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Total 583911.60 Item- 14 CHAPTER-19.0) DRAINAGE S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 1 19.1.1 100 mm diameter Metre 260 375.75 97695 2 19.1.2 150 mm diameter Metre 260 591.4 153764 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone 19.3 aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 3 19.3.1 100 mm diameter S.W. pipe Metre 260 425.6 110656 4 19.3.2 150 mm diameter S.W. pipe Metre 260 689.75 179335 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. 19.4 cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 19.4.1 100x100 mm size P type 19.4.1.1 With common burnt clay F.P.S. (non modular) Each 20 2453.55 49071 5 bricks of class designation 7.5 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), inside 19.7 plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total 19.7.1 weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non modular) Each 20 11687.1 233742 6 bricks of class designation 7.5 19.8 Extra for depth for manholes : 19.8.1 Size 90x80 cm 19.8.1.1 With common burnt clay F.P.S. (non modular) Metre 16 8127.45 130039.2 7 bricks of class designation 7.5 Providing and fixing in position pre-cast 19.19 R.C.C. manhole cover and frame of required shape and approved quality FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal 19.21 size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 8 19.21.1 For pipes 100 to 250 mm diameter Each 16 683.7 10939.2 Extra for depth beyond 45 cm of brick 19.31 masonry chamber : 19.33 Constructing soak pit 1.20x1.20x1.20 m filled Each 16 2940.2 47043.2 with brickbats including S.W. drain pipe 100 9 mm diameter and 1.20 m long complete as per standard design. Total 1012284.60 Item- 15 CHAPTER-21.0) ALUMINIUM WORK S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 2600 433.95 1128270 or dyed to required shade according to IS: 1 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 88 1325.55 116648.4 2 (weight not less than 12.50 kg/sqm) Total 1244918.40 Item- 16 CHAPTER-22.0) WATER PROOFING S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge to required slope and treating 22.7 similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test."All above operations to be done in order and as directed and specified by the Engineer-in- Charge : 22.7.1 With average thickness of 120 mm and Sqm 961.74 1522.95 1464681.93 1 minimum thickness at khurra as 65 mm. Grading roof for water proofing treatment 22.14 with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 57 7510.75 428112.75 2 sand : 4 graded stone aggregate 20mm nominal size) Total 1892794.68

Item Breakup - B-Electrical items

NS-1 Supply and Erection of modular metal Numbers boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar. Metal boxes boards are to be concealed in the wall for 12 Module FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY

NS-2 Supply and Erection of modular metal Numbers 110.00 boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 8 Module

NS-3 Supply and Erection of modular metal Numbers 130.00 boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 4 Module

NS-4 Supply and Erection of modular metal Numbers boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 2 Module

N S-5 Supply and recessing/fixing of 25mm Metre (Medium) PVC conduit pipe conforming to IS 9537/PLIII/1983 or Latest Version with accessories, junction box, etc including making chase, plastering/clamping etc as per technical Total 209964.20