Construction,Renovation and other development work under Swacch Saher Sudar Saher yojana for Borsad Nagar Palika, Borsad. Dist Anand.(3nd Attempt)

Item. No. Description Total Quantity Unit Rate Amount

Demolition including stacking of serviceable

1 materilas and disposal of unserviceable materials Cumt. 1082.35

with all lead and lift. (i) R.C.C. work

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead. (B) Dense or Hard soil

Providing and laying cement concrete work M-

150 for curing complete excluding cost of

3 formwork and reinforcement for reinforced Cumt. 4285.98

concrete work in(b) walls for top of foundations

level upto floor two level.

Providing and laying controlled cement concrete

M.250 and curing complete including cost of

4 formwork and excluding cost of reinforcement for Cumt. 8830.69

reinforced concrete work in (D) Column upto floor

two level. (upto 10 ton)

Providing and laying controlled cement concrete

M.250 and curing complete including cost of

5 formwork and excluding cost of reinforcement Cumt. 4655.93

for reinforced concrete work in (C) Ground Beam

upto floor two level. (upto 10 ton)

Filling available excavated earth (excluding rock)

in trenches ,plinth, sides of foundations etc.in

layers not exceeding 20cm in depth consolidating

each deposited layer by ramming & watering.

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness

including watering, ramming and consolidating

etc. complete. (upto 10 ton)

Providing TMT Bar FE 500/500D reinforcement

for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) and finishing with a

floating coat of neat cement slurry. (upto 10 ton)

Steel work, welded in built up sections framed

work including cutting, hoisting, fixing in

position and applying a priming coat of read lead

paint. (A) In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats

as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

Item. No. Description Total Quantity Unit Rate Amount

Providing and fixing Pre-Cast Rubber Dye/steel

dye Inter locking concrete Block 60mm thick

with grade of concrete M-30 pnumatic

compressed by mechanically pressed and as per

approved designconfirming to IS 15658:2006

including 35mm sand layer for levelling and

filling the joint with sand in proper line and level

as per IRC: SP 63-2018 ETC. complet.

Finishing wall with water proofing cement paint

on wall surface (two coats) to give an approved

brand and manufectureres and of required shape

even shade after throughly brushing the surface to

remove all dirt and remains of loose powered

materials etc. complete

Providing and Stacking of Bottle Palm of 210-

13 240 cm Bottamgrith 30-35 cm well developed in Nos. 353.5

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly leaning oil grease and other

forign matter and scoured with brushes fine steel

wood scrapers and sand paper with ready mixed

priming paint brushing red lead.

Painting two coat(excluding priming coat) on

new steel and other metal surface with enamel

paint,brushing interior to give an even shade

including cleaning the surface an even shade

including cleanin surface of all dirt dust and other

construction of Waste to Wonder work as directed by

Engineer in Charge

Finishing wall with Artistic Design with weather proof

exterior emulsion paint on wall surface (two coats) to

give a required shape even shade after thoroughly

17 brushing the surface to remove all dirt, and remains 252 Sqmt. 1484.7

of loose powdered materials etc. completed at all

floors / all levels / all heights and all shapes. The rate

includes all Type of Taxes and transportation.

Providing and erecting Neon light Pole Beautification

etc as directed by Engineer in Charge

Item. No. Description Total Quantity Unit Rate Amount

Direction sign (Junction board):-Providing and fixing

sing boards made out of 2mm aluminium sheet; size

244 x 122cms. rectangle as as per the design of IRC-

67-1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint; reflectorised with

retro refiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per

19 IRC-30-1968, 3.1m long (2 nos) stand post and frame 4 Nos. 14831.71

fabricated from suitable size iron angle of 50 x 50 x

5mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision

of engineer in charge.SOR 26098A P

Contigency Charge