SPECIAL REPAIR TO BUILDING NO P 109 SINGLE JCOS ACCN AT GRRC LANSDOWNE UNDER AGE I LANSDOWNE

Amount

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling of 100 mm dia cast iron pipe jointed in cement mortar and taking out of trenches , if required complete all as specified and directed.

Taking up or down steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking down cement plaster, any desription on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc and including removalof old materials from site not exceeding 100 meter complete all as specified and directed.

Disconnecting existing water tank,capacity not exc. 500 ltr setting aside (or lowering if required) and S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 300ltr hoisted and fixed in position complete all as specified and directed complete all as specified and directed.

Taking down Chowkats or frames incl. shutters (without taking of shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down Chowkats or frames incl. shutters (without taking of shutter from the frames) exc 1.50 Sqm and not exc 4 sqm complete all as specified and directed.

Taking down shutters of any description area exc. 1.00 sqm but not exc 2.00 Sqm each complete all as specified and directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:6 .complete all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan to any redius built in half brick thick wall built in cm 1:4 (Using old size brick) complete all as specified and directed.

M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note :-(i) Water proofing liquid compound shall be measured and paid separately(ii) Rates qouted are deemed to be including the cost of scaffolding as the building is Ground + one storey building.

Supply only Water proofing liquid compound (ISI Marked) complete all as specified and directed..

Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed..

Material & labour for Rendering 5 mm thick CM 1:3 on brick or concrete surfaces of ceiling /chajja's finished even & smooth without using extra cement complete all as specified and directed.

Material & Labour for 400x400x 7 to 8mm thick joint free Non-Skid light coloured ceramic tiles of any design and pattern, 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 Sqm and not exc. 0.16 Sqm, in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects.over and including 15 mm thick screed bed in cm 1:6 including dismantling of existing old tile and including removal of old materials from site not exceeding 100 meter . complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE(I)

Material & Labour for 400X400X 8 to 9 mm thick joint free light coloured glazed ceramic tiles of any design and pattern, as in dado etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects. including 10 mm thick in cm (1:4) backing coat and including dismantling of old tiling and including removalof old materials from site not exceeding 100 meter complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE(I) Lansdowne

Material & Labour for 300X450X 8 to 9 mm thick: light coloured glazed ceramic tiles of any design and pattern, as in dado etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects. including 10 mm thick in cm (1:4) backing coat and including dismantling of old tiling and including removalof old materials from site not exceeding 100 meter complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE(I) Lansdowne

M&L for mirror polished machine cut kota stone slab as in stair case 20 to 25mm thick in single piece and edges shall be bull nosing , laid over and including 20mm thick cement mortar 1:4 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab etc including dismantling of old tiling/stone and including removalof old materials from site not exceeding 100 meter complete complete all as specified & directed .

M&L for mirror polished Kota stone slab 20-25 mm thick in riser of steps in single piece , skirting, dado and pillar laid over cement screed/backing coat 15mm thick in CM 1:4 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc including dismantling of old tiling and including removalof old materials from site not exceeding 100 meter complete complete all as specified and directed

Material & Labour for 300x300x 7 to 8mm thick Non-Skid light coloured ceramic tiles of any design and pattern, 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.06 Sqm and not exc. 0.11 Sqm, in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects. including 15 mm thick screed bed in cm 1:6 including dismantling of existing old tile and including removal of old materials from site not exceeding 100 meter . complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE(I)

M & L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) 25 mm thick as in leveling course, fair finished to receive floor finishes complete all as specified and directed

S&F in repair PVC (SWR) pipes, 110mm bore, ISI Marked duly approved by AGE(I) , single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F PVC (SWR) bend 110 mm bore , ISI Marked duly approved by AGE(I) complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

S& F for GI tubing 15mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.

S&F for GI tubing 20 mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) ( heavy grade ISI Marked) including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete . complete all as specified and directed.

Fixing only GI tubing medium grade 15 mm bore with all fittings ( heavy grade ISI Marked) to wall /ceiling or laid in floors complete all as specified and directed Note :- Old GI tubing obtained from item No. 03 shall be reused in this item.

Fixing only GI tubing medium grade 20 mm bore with all fittings ( heavy grade ISI Marked) to wall /ceiling or laid in floors complete all as specified and directed. Note :- Old GI tubing obtained from item No. 04 shall be reused in this item.

S & F CI Nahani trap 75 mm dia with grating ( ISI marked heavy duty ) including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and directed

S&F in repair WC vitreous china, (pedestal patern ) white ISI Marked (including flushing cistern, seat cover and flush pipe of polythene of low or high density 32 mm ( ISI marked duly approved by AGE(I) lansdowne ) copmlete all as specified.and directed . Make Jaquar Essco Cat part No.ECS-WHT-551 PNPP183NLZ or equivalent in (Hindware Cat Part No. 20044 , Parryware Cat Part No. C0252/E8307/E8333 . complete all as specified and directed.

Supply and fixing PVC connection 15 mm dia, 450 mm long ( ISI marked duly approved by AGE(I) lansdowne ) including brass ferrules on both ends complete all as specified and directed

Supply only low density PVC pipe 32/40 mm dia as in waste pipe to sink ( ISI marked duly approved by AGE(I) lansdowne ) complete all as specified and directed

S & F stack clamp made out of 50x5 mm flat iron and 16 mm dia round iron stays incl bolts & nuts and secruing ends of stays to wall for 100 mm bore complete all as specified and directed

S&F in repair chromium plated health fauset telephonic type with CP flexible arms of approved make suitable for 15 mm bore iron pipes or for union and fixed complete all as specified and directed Make :- Jaquar Essco Cat Part No. ALE-ESS-585 and Hindware Cat Part No.F-160059 complete all as specified and directed Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site ..

S&F in repair CP shower rose with or without swivel joints of 125 mm size with shower arm complete all as specified and directed Make of shower rose Make – Jaquar Essco cat part No. ALE-536A or Hindware cat part No. F160004 and Make of overhead shower (JaquarEssco) Cat Part No. EOS-538 RB or equavlent in Hindware and Gem.. Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repair bib tap cast copper alloy with crutch or butter fly handle, screwed down for iron pipe 15 mm bore of tubing fancy type cromium plated (ISI Marked). complete all as specified and directed.Make -JaquarEssco Cat No MQT-511KN or equvalent in Gem Cat part No. 12210 and Hindware Cat part No. F200003 ( Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repair stop valve cast copper alloy screwed down high presure screwed both end for iron pipe 15 mm dia fancy type cromium plated (ISI Marked). complete all as specified and directed. Make JaquarEssco Cat Part No -MQT-526KN or equvalent in Gem Cat Part No. 12260 , Hindware Cat Part No. F110004 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repairs 15mm dia of pipe stop valves, fancy type and chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and directed .(Make Jaquar Essco Cat Part No - MQT-513AKN or equavalent in Gem and Hindware) Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe screwed down for 15 mm dia bore GI pipe complete all as specified and directed Make –Jaquar Essco Cat Part No 508 KN or equivalent in Gem , Hindware ( Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F Vitreous China wall hung wash basin white flat back excluding taps waste, chain and plug, but incl brackets fixed in repairs complete all as specified and directed. Make - Jaquar Essco Cat Part No. ECS-WHT-801,Hindware Cat Part No. F 10054,Parryware) Cat Part No. C0405

M&L for preparation of new surface of wall and applying two coat of Anti -fungel acrylic emulsion paint Make-Berger (wall masta),or equavlent in Asain or nerolac including one coat of primer complete all as specified by manufacturer and directed by Engineer-in-charge .

M&L for Complete removal of existing treatments by mechanised method from wall and applying two coat of Anti -fungel acrylic emulsion paint Make-Berger (wall masta),or equavlent in Asain or nerolac including one coat of primer after warring the surface with Bleaching Powder solution complete all as specified by manufacturer and directed by Engineer-in-charge

M&Lprepairing of new plaster surfaces and applying two coat Acrylic Emulsion paint after applying wall care putty as per manufacturer instruction incl a coat of primer white or tinted complete all as specified by manufacturer and directed by Engineer-in-charge.

M&L for Complete removal of existing treatments by mechanised method from wall by scraping and filling the damage portion with wall putty or cement mortar as required at site and applying two coat of Acrylic Emulsion Paint over a coat of primer after applying wall care putty as per manufacturer instructions including preparation of surface , complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M&L for Preparation of old wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint Ist quality after removal of existing treatment from old surface with help of thiner or other removing chemical materilas complete all as specified and directed.

M & L for preparation of old steel surafces of any description over 10 cm width or girth & applying two caots of synthetic enamel paint Ist quality after removal of old existing treatments with help of thiner or other removing chemical materilas complete all as specified and directed

M&L for preparation of new wooden surfaces of any desription over 10 cm width or girth & applying two coats of synthetic enamel paint (ISI Marked) Ist quality, over coat of Pink primer complete all as specified and directed

M&L IInd class hard wood( SAL) for plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed etc complete all as specified and directed.

S&F 35 mm thick plain framed panelled factory made shuttermade out of IInd class hard wood ( SAL) rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure treated of any number of panel as directed by EIC

S & F for FRP door frame : fibre glass reinforced plastic (FRP) Door frames shall be three lagged of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame. Complete all as specified and directed. Make - M/s Ashwini and Sons Murad nagar, TATA FRP Doors Mumbai, AGEWS Ahemdabad Gujarat, Ashish Industries Ghaziabad

S & F for FRP paneled door shutter FDR Door shutter shall be 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer. Made with fire retardant grade unsaturated polyester resin moulded to 3mm thick FRP laminat for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels. complete all as specified and directed : Make - M/s Ashwini and Sons Murad nagar, TATA FRP Doors Mumbai, AGEWS Ahemdabad Gujarat, Ashish Industries Ghaziabad

Providing and fixing windows & ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated(PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality. Galvanised as per IS 277 with Zinc of 90 Gsm/SqMt w. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.GI Section of 0.58mm thick in Double rebate windows in which both glazed shutter and flymesh shutter, 74 X 60mm outer frame , Mullion 72 x 49mm, Glazed shutter 48 x 22mm, Flymesh 41 x 22mm, Beading with round ends for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner PolyVinylChloride brackets centre mullion fixed with PolyVinylChloride Mullion caps . Glass of 4mm thick plain float glass fitted with Ethylene Propylene Diamine Monomer in glazed shutter and wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Black Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of polyvinylchloride with crca of zinc phosphate coat.Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, PolyVinylChloride handle 1 in each and Powder coated Peg stay in Glass shutter.Window shall be provided with Powder coated MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat with countersunk holes at both vertical ends . Gap between the bars should not be more than 150mm . Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screws after drilling in walls. VC Black Gypsum Drywall screws should be used while fixng corner brackets,stay,hinges,mullion caps of windows. . Windows to be procured from any of the below mentioned companies- i)_Ashwani and sons, 1246/2 Meerut Road,Morta, Murad nagar-201003 ii)TATA Steel-Mumbai iii)Jindal,2-32,Gurgaon, Haryana-122001 iv) Ashish Industries, R-4/66, Raj Nagar, Ghaziabad , Ph-9891542779

Supply & fixed in repairs Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40mm as in gauze door /window/ventilators shutters and fixed with aluminium wire staples etc(ISI Marked ) complete all as specified and directed.

S & F IInd class hard wood (SAL) fillets square or rectanguler or triangular in section wrought fixed to wall with screw area exc 13 but n. exc 25 sq cm complete all as specified and directed.

S & F 100 mm long stainless steel non megnetic butt hinges and fixed with stainless steel screw/welded to frames etc (ISI marked approved by AGE(I) all as specified and as directed

S&F 125 mm Extruded Aluminium handles fabricated type anodised etc (ISI marked approved by AGE(I) complete all as specified and directed

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed (ISI marked approved by AGE(I) .

S & F stainless steel non megnetic handle 150 mm long, (ISI marked approved by AGE(I) complete all as specified and directed

S&F 150 mm long stainless steel non megnetic barrel tower bolt (ISI marked approved by AGE(I) complete all as specified and directed.

S & F 150 mm long aluminium anodised, barrel tower bolt of extruded section (ISI marked approved by AGE(I) complete all as specified and directed

S & F 75 mm long aluminium anodised, barrel tower bolt of extruded section (ISI marked approved by AGE(I) complete all as specified and directed

S&F 300 mm long stainless steel non megnetic sliding door bolts , with bright bolt not less than 12 mm dia with and including minimum of six bolts and nuts, four on bolt plate and two on staple plate(ISI marked approved by AGE(I) etc complete all as specified and directed

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane including hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm figured glass, pin head type and glazed with oil putty in sqm n exc 0.50 aqm in each pane including hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as sp

S&F for Curtain rod 32 mmm dia, medium grade fixed with brackets brass chromium plated including bracket. complete all as specified and directed. Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

Demolition of cement concrete, reinforced in any description and in any position not otherwise specifically provided for and including removalof old materials from site not exceeding 100 meter complete all as specified and directed all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for providing factory fabricated precast cement concrete type B-1 1:2:4 (20mm graded aggregate)as in cover slabs (for manholes, drains etc.) of any size and thickness as required Set in cement mortar 1:4 including 10 mm dia TMT bar used as per desgin approved by AGE(I) complete all as specified and directed.

M&L for chequered cement concrete tiles 300X300X25 mm thick, rubber finished ,as in floors laid over and including 20 mm thick screed bed in cement mortar 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the tiles including dismantling of old stone slab tiling/ tileing and including removalof old materials from site not exceeding 100 meter complete complete all as specified and directed

Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. all as specified and directed.

M&L Point wiring with 1.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases etc along with contineous earth wire 1.5 Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover ISI marked fixed wth brass screw complete with all accessories for Make of PVC pipe:-Finolex,RPG,ESS ESS Kay (a) one light point/fan point/call bell point controlled by one, oneway switch.

(b) One light point controlled by one No piano type switch 5 AMPS single pole two way

(c) One 3 pin 5 Amps socket outlet on same board controlled by one, one way 5 Amps piano switch.complete all as specified & directed.

(d) All as per item no 75 above but for One 5 pin switch socket outlet 5A on independent board. complete all as specified & directed.

M&L Point wiring with 2.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases etc along with contineous earth wire 2.5Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover ISI marked fixed wth brass screw complete with all accessories for Make of PVC pipe:-Finolex,RPG,ESS ESS Kay (a) one three pin 15 Amps Switch Socket outlet on independent board

S&F switch piano 230 volts AC flush type, single pole, one way 6 Amps ISI Marked complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F bell push flush 5 Amps 230 volts single pole ISI marked complete all as specified and directed Make : Anchor/ Cona / Havells

S&F switch piano 230 volts AC flush type, single pole, two way 6 Amps ISI Marked complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F socket outlet 2/ 3 pin 230 volts 5/6 Amps flush type complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F switch piano 230 volts AC flush type single pole, one way 16 Amps ISI Marked complete all as specified and directed. Make : Anchor/ Cona / Havells

S&F socket outlet 3 pin 5 amp & 3 pin 15 Amps flush type 230V AC (ISI Marked) complete all as specified and directed. Make : Anchor/ Cona / Havells

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting ISI marked complete all as specified & directed Make : Anchor/ Cona / Havellsdirected

S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed Make : Anchor/ Cona / Havells

S&F bell ding dong elelctric 230V AC single pole all as speccified and directed Make : Anchor cate part No doorbell-10489-1B or equavalent in Cona / Havells

S&F MCB DB TPN 4 way with 200 amps 415 V rated copper busbar in sheet steel enclosure,double door type,complete all as specified and as directed. Make:- Legrand,Schneider,Siemens,L&T,

S&F MCB DB SPN 4 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure.double door type complete all as specified and as directed. Make:- Legrand,Schneider,Siemens,L&T,

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make:- Legrand,Schneider,Siemens,L&T,

Supply & fixing MCB TPN, AC, 415 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make:- Legrand,Schneider,Siemens,L&T,

S&F sub main wiring with two single core PVC insulated,unsheathed, stranded copper conductor cable 6 Sqmm with 6 Sqmm PVC insulated, unsheathed, stranded copper conductor cable as earth wire in and including rigid PVC conduit 25 mm dia or higher, medium grade ISI marked and earth wire connected to common earth dolly all as specified & directed. Note: Two run of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit. Make:- Havells,KEI,Universal,RPG,Gloster

S&F 20 Watt LED TUBE Rod with single side connection, polycarbonate diffuser and aluminium extruded housing,ultra bright LED tube light with very high efficiency suitable for G13 lamp holder, voltage range 120v-280V AC, power factor >0.95, thd<20%, CCT 6500k, to give glare free light complete all accessories all as specified &directed Cat No :LTTB4F20WLED of C&S /SZFRTMX020 of Shakti / equivalant in Havells/Wipro. System efficacy 110 lumens / watt. LM79 and LM80 reports to be produced.

Supply and fix LED street/security light fitting 20W housing made out of pressure die-cast aluminium alloy with toughned glass, IP-66 protection, working on 240 Volts AC, 50 HZ, consisting of reflective lens wired with approximate driver PF>0.98 having over voltage protection upto 440 volts, Surge protection level > 10 KV, thermal short circuit protection THD < 10% made up of long life LED chips (SMD) in modular with Ra>70, and LED lumen efficiency >140 lumen per watt, beam angle along the drive way, 120 degree, beam angle across the drive way, 80 degree luminior efficiency > 120 Lumens/watt power LED should be of more than 01 watt CCT should be between 5700 K- 6500 K including fixed on wall with 02 Nos MS clamp made out of 40 x 6 mm F1 and bracket made out of 40 mm dia light grade GI pipe not less than 1.2 mtr long bend to shape including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volta grade all as specified and as directed by Engr-in-Charge Make : shakti Cat Part No : SZPSLPM020/ ENDURAPEARLSL20W of HEVELLS/eauivalant Model in Bajaj/Wipro. Note :- (i) the firm has to give warranty for street light fittings including driver minimum for 03 years for any defects developed during the period. (ii) The contractor shall submit the third party LM 79 & LM 80 report from any NABL approved laboratory. (iii) The fitting should have BIS, CRS (iv) Connection to luminaire shall be done in suitable PVC connector within the bracket/luminaire end and are inclusive in above.

Supply and lalying as in repair XLPE insulated, screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) with alumimnium conductor, 1100 volts, grade cross sectional area 16 sqmm 4 core complete all as specified and directed.

Excavation in trenches in soft/disintegrated soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/foundation/for poles etc complete all as specified and directed.

Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.

Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for fine dry sand cushioning for underground cable by providing layers of sand 8 cm before laying and 15 cm deep after laying the cable including streching the cable (measurement to be taken after punning down consolidated thickness). complete all as specified and directed.

M&L for cable protection bricks common burnt clay sub class 'B' designation 75 for protection of UG cable laid in trenches all as specified and directed at site.

Supplying, laying & jointing GI water tubing, 50 mm bore, light grade as in sleeving etc laid in trenches / pole post /under culvert/ under road etc. for cable protection complete all as specified and directed .

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 4 mm GI wire as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick raienforced with XPM weight not less than 4kg/sqm in lieu of CI cover.

RAMAPATI ENGINEERING SERVICES

PIONEER REFRIGERATION AND ELECTRICALS

M/S Hind Constructions