Loading
Loading…
Loading…
Tender Value
₹18.1 Cr
EMD Value
₹18.1 L
Closing Date
24 Aug 2026, 6:00 pm
EXECUTIVE ENGINEER’S OFFICE, SURAT (R&B) DIVISION NO.1, SURAT
Construction of Categary E Type 32 Units Residential Quarters for the Judicial Officers at Nanpura, Surat
326648
5-1 of 2026-27
Open
Civil Works - Buildings
Works
Surat
17 documents required · 17 mandatory
₹18,000
Executive Engineer, Surat (R&B) Division 1, Surat
₹18.1 L
23 Jul 2026
23 Jul 2026
23 Jul 2026
24 Aug 2026
23 Jul 2026
No figures
1 Excavation for foundation upto 1.50 mt depth 2160.50 Cum 117.26
including sorting out and stacking of useful
materials and disposing the excavated stuff
upto 50 mt lead (A) Loose or soft soil.
2 Excavation for foundation 1.5 m to 3.0 m depth 1899.50 Cum 162.38
including sorting out and stacking of useful
materials and disposing the excavated stuff
upto 50 mt lead (B) Dense or hard soil
3 Excavation for foundation 3 m to 5 m depth 1170.40 Cum 287.48
including sorting out and stacking of useful
materials and disposing the excavated stuff
upto 50 mt lead (C) Hard Murrum
4 Providing and laying controlled lime moratar 1:1 163.10 Cum 1816.40
for fondation treatment in (A)Lime Mortar 1:1
(1-lime putty/ Equivalent dry Hydrated Lime
: 1-Fine sand)
5 Coursed rubble masonry with hard stone of 217.40 Cum 3334.48
approved quality in foundations and plinth in
Cement Mortar 1:6 (1-Cement : 6-coarse sand)
etc. complete.
6 Filling in foundation and plinth with Gravel in 102.02 Cum 419.89
layers of 10 cm. Thickness including watering
ramming and consolidating etc. comp. with all
lead and lift.
7 Filling in foundation and plinth with murrum or 795.40 Cum 289.06
including watering, ramming and consolidating
etc. complete.
8 Filling available excavated earth (excluding 2894.00 Cum 130.39
rock) in trenches. plinth, sides of foundations
etc. in layers not exceeding 20 cm. in depth
consolidating each disposited layer by ramming
and watering.
9 Applying general insecticide pest control 770.00 Sqm 50.90
treatment to floors, cupboards etc including
labour material etc. complete. Using
Imidacloprid 30.5 SC. As Per 6113 Part -II
(0.075% concentration by mass) is
recommended 10.5ml chemical diluted with
liters of water application 0.5 liters chemical/
sqm of surface is recommended as per I.S.
10 Providing and laying controlled cement concrete 363.60 Cum 3843.47
M.150 for curing complete excluding cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings For
Item Rate In
Description of Item Quantity Unit Amount
No figures
11 Providing and laying controlled cement concrete 1139.40 Cum 5081.31
M.300 and curing complete including the cost of
formwork and excluding reinforcement for
reinforced concrete work in (A) Foundations,
footings, and Mass concrete. For Raft &
Foundation footing
12 Constructing cast-in situ RCC diaphragm wall by 738.30 Cum 10260.59
providing and laying machine batched, machine
mixed, self compacting, ready mix reinforced
cement concrete, tramie controlled, of M
grade using minimum 425 kg cement per cum of
concrete including providing and mixing
required admixtures in recommended
proportions as per IS : 9103, as approved by the
Engineer-in-charge, for achieving 150- 200mm
slump, for diaphragm wall having thickness as
per approved structural design not exceeding
600 mm, in pannels of required depth and
lengths as per approved drawing, including
constructing necessary guide walls as required
and as specified including boring in all kinds of
soils and rocks, including working in or under
water and / or liquid mud, in foul conditions and
pumping or bailing out of water and removing
slush, including disposal of earth/ rock / slush
etc. for all leads and all lifts, including preparing,
providing and re-circulating bentonite slurry in
the trench as and when required for all depths,
including agitating bentonite slurry during
trenching etc., providing and fixing stop ends or
form tubes, upto the required depth of
diaphragm wall including extracting the same
after casting, including chipping off the
bentonite adulterated concrete or unsound
13 concrete
Providingup to laying
and the cutcontrolled
off level forcement
obtaining the
concrete 195.00 Cum 7297.46
M-350 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts For upto 1st
14 Providing and laying cement concrete 1:3:6 (1- 121.30 Cum 3005.76
Cement : 3- coarse sand : 6- Crushed stone
aggregates 40 mm nominal size) and curing
complete excluding cost of formwork in (A)
Foundation and Plinth
15 Providing and laying controlled cement concrete 179.50 Cum 7297.45
M-300 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts For 2nd Floor
to 4th Floor
Item Rate In
Description of Item Quantity Unit Amount
No figures
16 Providing and laying controlled cement concrete 268.90 Cum 7658.56
M-250 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts For 5th Floor to
17 Providing and laying controlled cement concrete 123.30 Cum 5897.39
M-250 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
below Plinth and Ground beam
18 Providing and laying controlled cement concrete 143.80 Cum 4623.78
M-250 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
below plinth slab
19 Providing and laying controlled cement concrete 994.50 Cum 6862.62
M.250 and curing complete including the cost of
formwork and excluding reinforcement for
reinforced concrete work in Slab for Ground
Floor to 9th Floor
20 Providing and laying controlled cement concrete 877.10 Cum 6349.88
M-250 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
beam for Ground Floor to 9th Floor
21 Providing and laying controlled cement concrete 33.50 Cum 6593.71
M-250 and curing etc. complete including the
cost of form work but excluding cost of
reinforcement for reinforced concrete work in
(c) Chhajja for for Ground Floor to 9th Floor
22 Providing and laying controlled cement concrete 37.00 Cum 8613.76
M-250 and curing etc. complete including the
cost of form work but excluding th cost of
reinforcement for reinforced concrete work in
(c) Lintel for for Ground Floor to 9th Floor
23 Providing and laying controlled cement concrete 39.60 Cum 7851.85
M-250 and curing etc. complete including the
cost of form work but excluding th cost of
reinforcement for reinforced concrete work in
(E) Stair case for for Ground Floor to 8th Floor
24 Providing and laying controlled cement concrete 42.50 Cum 7179.08
M-250 and curing etc. complete including the
cost of form work but excluding th cost of
reinforcement for reinforced concrete work in
Walls, from top of foundation to Plinth
Item Rate In
Description of Item Quantity Unit Amount
No figures
25 Providing and laying controlled cement concrete 172.70 Cum 7099.72
M-250 and curing etc. complete including the
cost of form work but excluding th cost of
reinforcement for reinforced concrete work in
RCC Vertical and horizontal wall for Ground
Floor to 9th Floor
26 Providing and laying controlled cement concrete 74.40 Cum 5899.37
M-250 for RCC work and curing complete
including the cost of form work but excluding th
cost of reinforcement for reinforced concrete
work in coping on Ground Floor to 9th Floor
27 Providing and fixing 30 cm high Stainless steel 152.00 Rmt 2449.25
Hand Railing made from anticorrocive 316 grade
S S pipe of 50 mm dia (16Gauge) as hand rail
with S S 316 grade Baluster of 38 mm dia (16
Gauge) as a vertical support fixed in RCC slab at
1.2m c/c at eqal distance fixed with baluster
including accessories as per detailed drawing as
directed etc. complete.
28 Providing and fixing Stainless steel Grill made 338.20 Sqmt 6051.92
from anticorrosive 316 grade S.S pipe of 50 mm
dia (16Gauge) as hand rail with S.S 316 grade of
38 mm dia (16 Gauge) as a vertical support fixed
in RCC structure at 0.60 m c/c equal distance &
S.S 316 grade of 25 mm dia (16 Gauge) as a
Horizontal support fixed in RCC structure at
0.175 m c/c at equal distance fixed including all
required accessories as per detailed drawing as
directed etc. complete.
29 Providing and fixing 75 cm high Stainless steel 95.70 Rmt 4103.63
railing made from anticorrocive 316 grade S S
pipe of 50 mm dia (16Gauge) as hand rail with S
S 316 grade Baluster of 38 mm dia (16 Gauge) as
a vertical support fixed in RCC slab at 1.2m c/c
including three horizontal S S pipes of 25 mm
dia (16Gauge) at eqal distance fixed with
baluster including accessories as per detailed
drawing as directed etc. complete.
30 Providing TMT Bar 500D reinforcement for 738571.00 Kg 78.38
R.C.C. work including bending, binding and
placing in position etc complete for All floor
31 Brick work using common burnt clay building 192.30 Cum 4021.02
bricks having crushing strength not less than
kg./Sq.Cm. in foundation and plinth in Cement
Mortar 1:6 (1- Cement : 6 -fine sand) (B)
Conventional
Item Rate In
Description of Item Quantity Unit Amount
No figures
32 Brick work using common burnt clay building 1691.70 Cum 4434.20
bricks having crushing strength not less than
kg./Sq.Cm. in foundation and plinth in Cement
Mortar 1:6 (1- Cement : 6 -fine sand) (B)
Conventional Ground Floor to 9th Floor
33 Half brick masonry in common brunt clay 758.40 Sqm 674.16
building bricks having crushing strength not less
than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-
Cement : 4 -coarse sand ) in foundation and
plinth (B) Conventional for Ground Floor to 9th
34 Providing and fixing 150 mm wide, approved 1839.00 Sqm 295.12
quality chicken wire mesh at junction of brick
work and RCC work or two dissimilar surfaces,
at all heights fixed by nails, rowal plugs or tag
before applying the plaster, including curing,
scaffolding all complete as directed.
35 Providing 20 mm thick double coat mala cement 15904.80 Sqm 370.31
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm
thick cement plaster in cement mortar (1
Cement : 4 coarse sand) in rough finishing and
mm thick top coat of cement mortar 1:2 (1
Cement : 2 Coarse sand) finished with trovel
including scaffolding curing, 10x10 mm grooves
at junction of structural member etc. complete.
For Ground Floor to 9th Floor
36 Providing 10 mm. Thick cement plaster in single 6455.60 Sqm 252.33
coat for plastering on ceiling and soffits of stairs
and finished even and smooth in : (I) Cement
mortar 1:4 (1 cement : 4 sand) including Mala
troveled finish etc. complete.For Ground Floor to
37 20 mm Thick sand faced cement plaster on walls 8617.30 Sqm 366.81
all height above ground level consisting of
mm Thick backing coat of c.m. 1:3 (1 cement :
sand) and 8 mm Thick finishing coat of c.m. 1:1
(1 cement : 1 sand) etc. complete. For All Floor
38 Applying and making (18x10) mm groove in 9217.80 Rmt 10.10
plaster at juction of structure or as required etc.
complete. For All Floor
39 Providing throating or plaster drip and moulding 713.20 Rmt 41.66
to R.C.C. Chhajja.
40 Applying two coats of putty & two coats of 22239.40 Sqm 40.59
primer of approved brand and manufacture on
new wall surface to give an even shade including
thoroughly brushing the surface free from
mortar dropping and other foreign matter and
sand papered smooth. For all floor
Item Rate In
Description of Item Quantity Unit Amount
No figures
41 Wall painting (three coats) with plastic 15783.80 Sqm 113.11
emulsion paint of approved brand including one
wall to highlight in special colour and
manufacture on undecorated wall surface to give
an even shade including throughly brushing the
surface free from mortar droppings and other
foreign matter and sand papered smooth. For all
42 Painting (three coats) with plastic emulsion 6455.60 Sqm 118.52
paint of approved brand including one wall to
highlight in special colour and manufacture on
undecorated ceiling surface to give an even
shade including throughly brushing the surface
free from mortar droppings and other foreign
matter and sand papered smooth. For all floor
43 Finishing wall with weather proof exterior 8619.30 Sqm 114.53
emulsion paint on wall surface (two coats)
including primer to give an required shape even
shade after thoroughly brushing the surface to
remove all dirt, and remains of loose powdered
materials.etc complete For all floor
44 Providing and fixing pre-cast Rubber Dye inter 1245.20 Sqm 686.90
locking concrete block 60mm thick with grade of
concrete M300 pnumatic compressed by
mechanically pressed and as per approved
design including 75mm Sand layer for levelling
and filling the joint with sand in proper line and
level etc complete.
45 Providing erecting and fixing double coated 40000.00 Litre 3.95
P.V.C water tank Confirming to IS 12701 of
required capacity each with all necessary fittings
and connection etc. complete on terrace
46 Providing laying and jointing in true line and 344.00 Rmt 336.33
level 50mm dia. U.P.V.C. Pipe ( SCH- 80) for cold
water including fittings make as approved by
Engineer In Charge. Pipe shall be fixed on Z
clamp (Paid Separately) with the help of clamp
at every two metre C/C or shall be concelled as
directed including necessary fittings etc.
including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all
materials.
47 Providing laying and jointing in true line and 672.00 Rmt 148.12
level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings as approved by
Engineer In Charge. Pipe shall be fixed on Z
clamp (Paid Separately)p with the help of clamp
at every two metre C/C or shall be concelled as
directed including necessary fittings etc.
including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all
materials.
Item Rate In
Description of Item Quantity Unit Amount
No figures
48 Providing laying and jointing in true line and 288.00 Rmt 91.84
level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings as approved by
Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre
C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive
solvent, including cost of all materials.
49 Providing laying and jointing in true line and 384.00 Rmt 72.65
level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold
water including fittings make as approved by
Engineer In Charge. Pipe shall be fixed on the
wall with the help of clamp at every two metre
C/C or shall be concelled as directed including
necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive
solvent, including cost of all materials.
50 Providing, laying and jointing in true line and 284.00 Rmt 831.22
level 160 diametre U.P.V.C (Type B) conforming
to IS 13592-1992 with one end plain and other
end socketed with rubber ring, & fittings
conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be
jointed with each other with rubber lubricant,
pipe shall be fixed on Z clamp (Paid Separately)
using of PVC clamp of the size 160 mm diametre
x 210 mm length x 196 mm heigh at every
mm center to center or shall be concealed in
walls as directed including necessary fittings
such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive
solvent cement including cost of all materials.
51 Providing laying and jointing in true line and 470.00 Rmt 1126.66
level 200mm dia. Form core Pipe for drainage
including fittings as approved by Engineer In
Charge. Pipe shall be fixed on existing structure,
Wall or ground with the help of clamp or shall
be concelled as directed including necessary
fittings etc. including testing of pipe and joints
and fixing the same with adhesive solvent,
including cost of all materials.
Item Rate In
Description of Item Quantity Unit Amount
No figures
52 Providing, laying and jointing in true line and 1320.00 Rmt 836.73
level 110 diametre U.P.V.C SWR (Type B)
conforming to IS 13592-1992 with one end plain
and other end socketed with rubber ring, &
fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line,
pipe shall be jointed with each other with rubber
lubricant, pipe shall be fixed on Z clamp (Paid
Separately) using of PVC clamp of the size
mm diametre x 149 mm length x 145 mm heigh
at every 2000 mm center to center or shall be
concealed in walls as directed including
necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed
with adhesive solvent cement including cost of
all materials.
53 Providing and fixing on floor 10.0 Kg. F/Cm2 64.00 Rmt 277.43
working pressure polythene pipes of the
following outside Dia. Low densidy, complete
with special falnge compression type fittings,
wall clipsetc. including making good the wall
ceiling and floor.(F) 75mm
54 Providing and fixing in PVC SWR cowel went 16.00 No 98.98
160mm dia to pipes.(B) 160mm dia.
55 Providing and fixing MS Z clamp on Wall or 1757.00 No 70.70
celling for Pipe Fitting including all type
necessary fittings and accessory etc. completed
as per directed engineer in charge.
56 Providing and fixing PVC SWR Nahni trap IS 352.00 No 571.08
14735 for drain - 100 mm diameter with jali of
the following nominal diameter of self cleansing
design with C.I scread down or hinged grating
including the cost of cutting and making good
the walls.
57 Providing and fixing Conventional EWC with jet 96.00 No 4386.43
CERA or equivalent Conventional snow white
with close seat cover including Health Faucet
ABC body with 1 m SS Braided connection pipe
with all fitting inlet and outlet connection and all
required fitting accessories etc. completed as per
directed engineer in-charge.
58 Providing and fixing ball cock of approved. 8.00 No 189.84
quality as directed.(A) Copper Metal (ii) 50mm
Item Rate In
Description of Item Quantity Unit Amount
No figures
59 Providing and fixing Wash Basin CERA or 128.00 No 2505.81
equivalent Snow White size 450x350x140mm
Including Rag Bolts ,Polyamide braided
connection pipe 12mm dia-450mm length
Wast coupling (Full thread) 32mm Dia , Wast
Pipe 32mm dia with all fitting inlet and outlet
connection and all required fitting accessories
etc. completed as per directed engineer in-
60 Providing and fixing Kitchen SS Sink Glosy ASIS 32.00 No 2057.37
304 Grade x 1mm thick with over all size
610x460 mm & bowl size 560x410x200
including cutting holes in walls and making good
the same including necessary fittings with
32mm dia C.P brass waste , 32mm dia M.I fisher
union and Rubber plug Etc. completed
61 Providing and fixing PVC non-return fullway 32.00 No 389.86
wheel valve (A) 25mm dia.
62 Providing and fixing PVC non-return fullway 32.00 No 570.65
wheel valve (A) 40mm dia.
63 Providing and fixing Towel Ring (SS 304) Round 96.00 No 735.28
Cera or equivelent End Pair including all screws,
Fittings and labour charges etc. Completed as
per directed engineer in charge.
64 Providing and fixing Bib Cock with wall flang 320.00 No 898.90
and aerator cock Cera or equivalent including all
Fittings and labour charges etc. Completed ;
Also including 15 years Warranty as per directed
engineer in charge.
65 Providing and fixing Pillar cock Cera or 128.00 No 898.90
equivelent with aerator including all Fittings
and labour charges etc. Completed ; Also
including 15 years Warranty as per directed
engineer in charge.
66 Providing and fixing Overhead Shower Cera or 96.00 No 1059.49
Equivalent 125 x 125mm dia (5" x 5") with
200mm (8") long shower arm and wall flang
including all Fittings and labour charges etc.
Completed ; Also including 15 years Warranty
as per directed engineer in charge.
67 Providing and fixing Angle Cock With adjustable 224.00 No 611.05
Wall Flange Cera or Equivalent including all
Fittings and labour charges etc. Completed ;
Also including 15 years Warranty as per directed
engineer in charge.
68 Providing and fixing Wall Mixer 3 in 1 Cera or 96.00 No 3652.16
Equivalent with bend pipe for overhed shower
including all Fittings and labour charges etc.
Completed ; Also including 15 years Warranty
as per directed engineer in charge.
Item Rate In
Description of Item Quantity Unit Amount
No figures
69 Providing and fixing Flush cock (Lever, 96.00 No 629.23
Cartridge, sleeve, flange) Cera or equivelent
including all screws, Fittings and labour charges
etc. Completed ; Also including 15 years
Warranty as per directed engineer in charge.
70 Providing and fixing S.W. gully trap with C.I. 16.00 No 1246.92
grating brick masonry chamber and water tight
C.I. cover with frame of 300mm x 300mm size
(inside) with standard weight (i) Square mouth
traps (B) 150mm x 100mm size P or R type
71 Constructing brick masonry chamber for 40.00 No 3027.98
underground C.I. Inspection chamber and bends
with bricks having crushing strength not less
than 35Kg. Cm2 in C.M. 1:5 precast RCC cover
455mm x 610mm intenal dimensions with frame
(IF required R.C.C. top slabe with 1:2:4 mix (1-
cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete
1:5:10 inside plaster 15mm thick with cement
mortar 1:3 finished smooth with a floating coat
of neat cement on walls and bed concrete etc.
complete (i) Inside dimensions 455mmx 610mm
and 450mm deep for single pipe line.
72 Constructing Manhole with foundation concrete 15.00 No 11353.41
1:3:6 mix (1-cement : 3- coarse sand :6-Brick
bats 40 + 50mm size) inside plastering 15mm
thick with Cement Mortar 1:5 (1-Cement : 5-
coarse sand) finished with a floating coat of neat
cement and making channels in cement concrete
1:2:4 mix (1-Cement :2-Coarse sand :4-stone
aggregate 20mm nominal size) finished smooth
complete including curing and festing (i) Inside
size 900mm x 1200mm and 1.5M. deep including
Precast RCC cover with frame size 560mm
diameter (A) With 230mm thick walls of brick
msonry using brick having crushing strength not
less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-
Cement: 5-Coarse sand) (1) A type depth
Metre for 150mm diameter sewer.
73 Extra over items for every additional depth of 40.00 No 242.39
0.1M. of part thereof beyond 450mm depth for
Brick masonry chamber.(i) for 455mm x 610mm
74 Providing cement vata (10cm x 10cm size) 780.20 Rmt 23.68
quarter round in cement mortar 1:1 including
neat cement finishing watering etc. Complete
Item Rate In
Description of Item Quantity Unit Amount
No figures
75 Providing and laying 600 mm x 600 mm Double 3794.10 Sqm 1144.33
charged 10 mm thick Vitrified tiles in flooring
laid on 20 mm thick cement mortar 1:6 (1
cement : 6 coarse sand) on new surface and
jointed with coloured cement slurry including
finished with flush pointing & cleaning the
surfaceetc complete for all floors as directed by
Architect or Engineer in chage. (including cost
of 10% dark colour tiles for patten of same
76 Providing and laying Double charged 10 mm 542.10 Sqm 1293.20
thick Vitrified tiles in Skirting laid on 10 mm
thick cement mortar 1:3 ( 1 cement : 3 coarse
sand) and jointed with white cement slurry with
matching pigments including cleaning etc.
complete for all floors as directed by Architect or
Engineer in chage.(including cost of 10% dark
colour tiles for patten of same material)
77 Providing and laying 600 mm x 600 mm 10 mm 549.70 Sqm 1169.38
thick full body MATT FINISH vitrified tiles in
flooring over 20 mm average base of cement
morter 1 : 6 ( 1 cement : 6 Coarse sand) on new
surface, jointed with colout cement slurry
including finishing with flush pointing and
cleaning the surface etc complete for all floors as
directed by Architect or Engineer in chage.
78 Providing and laying polished Blue Kota stone 261.00 Sqm 989.45
slab flooring over 20mm (Average) thick base of
cement mortar 1:6 (1-cement : 6-coarse sand) or
L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid
over and jointed with grey cement slurry mixed
with pigment to match the shade of slab
including rubbing and polishing including 3mm
Epoxy Groove etc. complete. (A) 25mm thick
79 Providing and laying polished Blue Kota stone 46.70 Sqm 1076.75
slabe 25mm thick in risers of steps, skirting
Dedo and pillars laid on 10mm thick cement
mortar 1:3 (1-Cement : 3 coarse sand) and
jointed with gray cement slury mixed with
pigment to match the shade of slab including
rubbing and polishing etc. complete
80 Providing and laying Mate Finished 549.80 Sqm 1070.60
Ceramic/Porcelin tiles 600mm x 600mm x 6mm
thick in flooring treads of steps and landing laid
on a bed of 12mm thick cement mortar 1:3 (1-
cement : 3-coarse sand ) finishing with 3mm
epoxy groove & jointed with white cement.
Item Rate In
Description of Item Quantity Unit Amount
No figures
81 Providing and laying 300mm x 600 mm & 8mm 3400.60 Sqm 1854.97
thick premium digital printed glazed tiles of
shade and design in skirting and dado on 10 cm
thick cement plaster 1:3 (1 cement : 3 coarse
sand) and jointed with white cement slurry with
necessary pigment to match the shade including
3mm spacer as per approved pattern and
aproved colour and size by Architect or Engineer
in charge for all floors.
82 Providing and fixing machine cut mirror 1375.60 Sqm 2568.43
polished 15mm-18mm thick Black Granite
cladding laid over 12mm thick base of cement
mortar 1:3 on sill, jambs and top in full width of
wall and rounded moulding of expose All edge as
directed etc. comp.
83 Ready to install Full body Vitrified tiles 8 to 10 258.70 Sqm 1934.25
mm thick with unique Anti-skid unglazed
surface finish with self embossed grooves and
Bull-nose finish of 2 pieces (1000mm x 300mm)
with a thickness of 12-15mm for the tread, and
pieces (1000mm x 150mm) with a thickness of
10mm for the riser. These tiles are to be installed
on a 20mm (average) thick layer of CM 1:6 for
the treads and a 10mm thick layer of CM 1:3 for
the risers on a new surface. The joints are to be
filled with colored cement slurry, finished with
flush pointing, and the surface cleaned.
Additionaly fixing Anti skid Tap 50mm widw on
Trads including labor RateThis process is to be
completed for all floors as directed by the
Architect or Engineer in charge. For staicase
84 Providing and laying China mosaic type water 827.40 Sqm 1077.67
proofing treatment on terrace including cleaning
the surface by wire brush as directed including
applying neat cement slurry @ 2.75 Kg/Sq.smt.
mixed with water proofing compound after
cleaning the surface, laying cement concrete
using brickbats 25 to 100mm size well
immersed in water with 50% of cement mortar
1:5 (1 cement :5 coarse sabd) mixed with water
proofing compound over 20mm thick layers of
cement mortar 1:5 (1 cement :5 sand) to
required slope including rounding of junctions of
walls and slabs and after two days of proper
curing, applying second coat of cement slurry
finishing the surface with rate 20mm thick
cement mortar 1:4 and china mosaic tiles and
finally finishing the surface with white cement
slurry and after finishing the whole terrace shall
be flooded with water for a period of two weeks.
Item Rate In
Description of Item Quantity Unit Amount
No figures
85 Providing and laying cement concrete flooring 523.70 Sqm 356.33
1:2:4 (1-cement : 2-coarse sand : 4-graded stone
aggregate 20mm nominal size) laid in one layer
and finished with a floating coat of neat cement.
(A) 50mm thick.
86 Providing and filling with good quality 52.40 Cum 535.30
sinder(steam coal) as directed by engineer in
charge in sunks in layers of 15 cm
thick,including watering,placing ,ramming well
etc as directed, for all floor.
87 Providing and laying water proofing treatment 686.00 Sqm 926.18
by conventional method including cleaning the
slab surface by wire brush as directed including
provding first layer of C.M. 1:4 of 40 mm
thickness mixed with water proofing compound
at rate prescribed by manufacturer, including
putting of brick bats of average thickness 40 mm
Well immerssed in water laid uniformly on first
layer of mortar including applying cement slurry
@ rate of 0.08 bag/sqm. on fixed layer of brick
bats including maintaining necessary slope, in
second layer 40 mm thick C.M 1:4 mixed with
water proofing compound as directed, including
finishing smooth with cement slurry as directed
88 Providing & fixing in position standard extruded 368.70 Sqm 4213.72
Aluminum Four track sliding shutters (1 Wired
Mosquito Shutter) with colour anodized section
having Horizontal Bottom and Top member-
20993 Weight per Rmt = 0.839 Kg , inter lock
section-20550 Weight per Rmt = 0.994 Kg, side
(Handle)-20549 Weight per Rmt = 0.809 Kg, &
Frame bottom with gutter section-20928 Weight
per Rmt = 2.032 Kg, Frame Top & side section-
20837 Weight per Rmt = 1.197 Kg including
providing heavy lock, 5 mm thick colour tinted
tinted glass for glazing fixed with transparent
silicon gasket & Providing and fixing Wire
Mosquito Mesh Jali of 0.71mm Gauge with All
required Fittings as per window size including
all required materials labours and equipments
as per detailed drwg. as directed.
Item Rate In
Description of Item Quantity Unit Amount
No figures
89 Providing & fixing in position standard extruded 31.00 Sqm 4691.45
Aluminum Two track sliding shutters with
colour anodized section having Horizontal
Bottom and Top member-20993 Weight per Rmt
= 0.839 Kg , inter lock section-20550 Weight per
Rmt = 0.994 Kg, side (Handle)-20549 Weight per
Rmt = 0.809 Kg, & Frame bottom with gutter
section-20928 Weight per Rmt = 2.032 Kg,
Frame Top & side section-20837 Weight per Rmt
= 1.197 Kg including providing heavy lock,
mm thick colour tinted tinted glass for glazing
fixed with transparent silicon gasket & Providing
and fixing Wire Mosquito Mesh Jali of 0.71mm
Gauge with All required Fittings as per window
size including all required materials labours and
equipments as per detailed drwg. as directed.
90 Providing & Fixing in position standard extruded 46.10 Sqm 2223.01
approved colour anodized Aluminum Ventilator
Size as per design with outer frame 63.50 x
38.10 x 1.95 mm Section No.4605,@ Wt.
kg/Rmt with 5 mm thick bajari figured
adjustable glass louvers as shown in elevation
Providing and fixing Nylon Mosquito net with
stitching on wall as per window size for as per
detailed drawing as directed. For Ventilator
91 Providing and fixing 35 mm thick flush Single 555.80 Sqm 5092.93
door shutter, solid core Confirming to IS:2202 &
ISI approved manufacture with Anodized
Aluminium section ( door section no 19552-
weight not less than 1.1 kg/mt ) frame size
63.5mm x 38mm inserted Non teak wood frame
inside the aluminium section for durable grip of
hinges(4no each shutter) & Single shutter with
required teakwood batten having 1mm thick
lamination on both side, including cost of
Hydraulic Door Closer , Durable Grip shall be
providing with both side 15cm long stainless
steel handle and necessary Locking system of
,fixtures & fastenings etc. directed by engineer in
Item Rate In
Description of Item Quantity Unit Amount
No figures
92 Providing and fixing FRP frame size 100x50mm 242.00 Sqm 2377.76
and 28 mm thick FRP shutter with wood grain
raised panneled design finish double shutter
having extra reinforcement on sides & edges in
Gel coat finish. The core of the shutter & frame is
to be filed up with injected polyurethene foam
done in situ along with embedded wooden
pieces for stiffening & also taking hinges &
fintures. The whole FRP frame & shutter is to be
water proof weather proof, termite proof &
resistance to mild acid/alkali. Rates are to be
inclusive of S.S hinges with fastener sleeve &
alluminium fixtures & fastenings.
93 Providing and fixing M.S Safty Grills having 11994.00 Kg 111.40
12mm Solid MS bar Horizontally at every equal
0.10m C/C distance and 2 no of bar Vertically at
every equal 0.375m C/C distance Fixing on
around (5x40) mm Solid MS Patti including
cutting, welding and fabrication etc; including
one coat of primer of approved quality and two
coats of oil painting as per detail drawing etc.
complete as per directed Engineer in charge.
94 Providing & Fixing 114mm wide G.I. Sheets 542.40 Sqm 3964.25
lovers having weight not less than 490 Gm/m
roll formed to create 84mm wide louver snap
fixed on special shaped GI channel. Fix louvers &
channels shall finished with powder coating of
55 micron (1) 0.55mm thick sheet.etc. complet
as per detail drawing as directed. All Floor
95 Providing and fixing G.I ladder 0.45m Width 10.00 Rmt 1356.43
having 50mm dia. pipe both side Vertically and
32mm dia. pipe at every 0.3m C/C Horizontally
or required spacing & with round headed bolts
and nuts or screws or welding including
Polishing work and all labour charges etc.
completed as directed by engineer in charge
96 Providing and fixing in position 150 mm high, 114.00 No 404.00
150 mm wide English /Gujarati letter made front
1.0 mm thick stainless sheet as directed by
Engineer-in-charge with all necessary tools &
plants etc. complete.
97 Writing letter or figures on any surface with 90.00 No 3.58
black japan paint or thick white paint (ii) Indian
or block (Letters/Figures)
Item Rate In
Description of Item Quantity Unit Amount
No figures
98 Constructing Sandwitch Platform of 15mm-18 79.20 Sqm 5546.92
mm thick Polished Black Granite at top and
mm thick Kota stone slab one side polished at
bottom with cementing Materials / adhsives
including makeing necessary grooves in walls
with Vertical sandwich two Kotastone 25 mm
support every 60 cm centre to centre covered
with granite patti or as required including all
labour material of approved quality incl. half
moulded round front edge granite strip of one
side polished and jointed with grey cement
slurry including rubbing and polishing etc.
complete for all floors
99 Providing and fixing 15mm-18 mm thick 730.50 Sqm 2497.73
Polished Black Granite Shalve with full round
edge and double side polished of any required
and fixing with 12 mm (av.) thick bases of
cement mortar 1:3 (1-cement : 3-coarse sand) &
adhesive including All exposed edges cut and
Smooth Finished as directed by engineering in
charge etc. complete.
100 Providing and fixing concealed center point to 576.00 Rmt 166.86
wall ceiling & floor CPVC (SDR 13.5) PIPE having
National Sanitation Foundation (NSF) seal for
potable water of following dia. nominal bore
tube fittings and clamps including making good
the wall, ceiling and floor etc. complete.[A]
101 Providing & fixing Cupboard shutter having 604.80 Sqm 3715.79
25mm thick block board & including with frame
25 mm x 50 mm size as directed etc. complete
including necessary both side lamination 1 mm
thick outer side & 0.80mm thick inner side fixing
by necessary 6" SS hinges, 8" handles, magnet,
stoppers, etc. as directed including fevicol, and
other hardware material required. Plywood and
all fixture shall be of ISI quality and as approved
by engineer-in-charge including cost of teak
wood beading, one coat of primer and two coats
of oil painting or polishing as directed.
102 Providing and fixing kitchen platform trolley 43.20 Sqm 13930.93
having three drawers of SS (IS 304) of required
size like thali, katleri, perforated, partition,
cupsosar type in kitchen platform having drawer
front side and backside by using 19mm thick all
proof plywood of ISI quality all side laminated
etc. as directed. The size of SS (IS 304) basket of
size 4" to 18" for thali, dish, katleri, perforated,
partition, cupsosar type as directed including
necessary S.S. fittings, handles, nobs, telescopic
channels, etc. as directed
Item Rate In
Description of Item Quantity Unit Amount
No figures
103 Providing and laying controlled cement concrete 293.00 Cumt 4922.74
M.250 and curing complete including the cost of
formwork and excluding reinforcement for
reinforced concrete work in (A) Foundations,
footings, and Mass concrete. For Raft &
Foundation footing
104 Providing and laying controlled cement concrete 39.00 Cumt 7130.60
M-250 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
(d) columns Up to Plinth level.
105 Providing and laying controlled cement concrete 6.00 Cumt 7429.62
M-250 and curing complete including the cost of
form work but excluding the cost of
reinforcement for reinforced concrete work in
Columns, pillars posts and struts G.FLOOR
106 Providing and fixing C.I. Manhole cover 0.60 M. x 2.00 Nos 958.17
0.45M. size having weight not less than 35Kg.
107 Providing and fixing rolling shutters of approved 6.00 Sqmt 2745.59
make made of 80 mm wide M.S laths inter-
locked together through heir entire length and
jointed together at the ends by end locks
mounted on specially designed pipe shaft with
bracket plates,guide channels and arrangement
for inside and outside locking with push-pull
operation including the cost of hood cover and
sprig etc.complete(A) Shutters having width
below 3.5M
108 Providing and laying cement concrete work 10.00 Cum 3902.20
1:2:4 (1- Cement : 2- Coarse sand : 4- graded
stone aggregates 20 mm nominal size) and
curing complete excluding cost of formwork and
reinforcement for reinforced concrete work in
(A) Foundations, footings, Base or columns and
Mass concrete For PCC
Item Rate In
Description of Item Quantity Unit Amount
No figures
109 Providing and fixing parking shed having M.S. 60.00 Sqm 2395.72
post Hollow section pipe sections
100mmx100mmx4.0mm every 3m c/c and cross
suport each side of Post , and roofing support
sections measuring MS hollow pipe
80mmx40mmx4.0mm parallel to the shorter
span every 3m c/c, and sections measuring MS
hollow section 40mmx40mmx2.6mm parallel to
the longer span every 1.1m c/c & the roof panel
shall be made out of 0.5 mm thick pre-coated
Colour GI sheet ridge flashing, and shall include
cutting, hoisting, fixing, welding, pop rivet or self-
drilling/self-stitching fasteners, all labor
charges, freight charges, with a priming coat of
red lead paint, and two coats of oil paint on steel,
etc. The work shall be completed as per the
drawing or directed by the engineering in-
110 Providing and laying of Hot applied 10.00 Sqm 367.72
Thermoplastic compound 2.5 mm thick
including Reflectorising Glass Beads @ 250 gms
per sqm area, thickness of 2.5 mm is exclusive of
surface applied glass beads as per IRC : 35 &
finished surface to be level, uniform and free
from streaks and holes.
111 Providing and fixing pre-cast concrete kerb 366.00 Rmt 361.64
stone of gray cement based concrete block 30cm
length,30cm height and 15cm thick of M250
grade concret as per approved design and
including excavation for fixing in proper line and
level,filling the joint with C:M 1:3 (1cement:3fine
sand) etc complete.
112 Drilling of min. 250 mm dia. bore hole in all 160.00 Rmt 1138.27
strata including dualover burden strata by
combination DR/DTH rig including lowering
mm dia MS ERW pipes in bore hole and testing
etc.all work as per directed engineer incharge.
113 Manufacture, supply and delivery of cage 60.00 Rmt 1252.40
typeTrapezoidal shape ( ' V ') wire wound low
carbon, Galvanized screen pipe and Stainless
Steel Screen pipes, confirming IS: 8110 For (B)
200mm dia 1) 1.00mm Slot size
114 Bore plug having 100 mm height made from M.S. 1.00 No. 1105.95
plate with 3 holes at equal distance on
circumference for nut-bolts type, locking
arrangement with nuts-bolts & lock nuts of std.
Make complete. For 250mm dia
115 Providing and fixing check or non return pully 1.00 No. 1111.00
wheel valve of 50 mm diameter.
Item Rate In
Description of Item Quantity Unit Amount
No figures
116 Manufacture, supply and delivery of following 60.00 Rmt 152.51
ISI marked HDPE pipes (IS:4984/1985 with
latest amendment) having material Grade PE-80
in approximate 100 meter coil length or as per
GWSSB requirement with SS316 nipple at both
ends having 11 TPI threads as per specifications,
press fitted and bolted having nominal diameter
as under as per detailed technical specifications.
117 Providing and fixing on Z clamp and floor 10.0 30.00 Rmt 336.24
Kg. F/Cm2 working pressure poluthene pipes of
the following outside Dia. Low densidy, complete
with special falnge compression type fittings,
wall clipsetc. including making good the wall
ceiling and floor.(G)110 mm
118 Providing and fixing on Z clamp and floor 10.0 120.00 Rmt 696.90
Kg. F/Cm2 working pressure poluthene pipes of
the following outside Dia. Low densidy, complete
with special falnge compression type fittings,
wall clipsetc. including making good the wall
ceiling and floor.(G)160 mm
119 Providing junction for rain water juncton 8.00 Nos. 8948.60
chamber of size 0.60x0.60x0.75m with
excavation of size 1.96x1.96 m & 0.15m thick
c.c.1:2:4 bed concrete including brick masonary
wall in CM 1:6 of 0.75m height & 0.23m thick
with 15mm thick cement plaster inside &
outside & 1.06x1.06 RCC (1:2:4) slab of
thickness 0.15m with CRS steel and
0.60mx0.45m cast iron manhole cover with
frame weight not less than 35 kg as per directed
by Engineer-in-charge
120 Providing Filter chamber of Brick work in C:M 2.00 Nos. 17394.71
1:6 of size 2.06mx1.20m x1.20m & excavation
dimension of 2.66mx 1.81x1.35m including C.C
1:2:4 bed concrete of 0.15m thick including brick
work in c.m 1:6 for 23cm thick wall including
15mm thick cement plaster inside & outside
with cement slurry & 10cm thick RCC 1:2:4 top
cover with frame of minimum weight of 35 kg &
filling filter material kapchi in layers (25-40mm
& 10-20mm) & BT metal 40mm & sand as per
directed by Engineer-in-charge.
Item Rate In
Description of Item Quantity Unit Amount
No figures
121 Providing and installation Recharge pit of 2.00 Nos. 109645.60
“RAIWOHA” Make 3 layer RCC Precast Injection
well system of size 1.5 meter Dia. X 3.4 Meter
Height rein forced concrete precast three layer
module with 6” dia x 12” dia. V wire screen of
0.75mm x 1.0 mm Slot size in SS 304 material
and 1.0 meter height with MS Top cover and
required Air vent including all necessary
excavation and transportation at site including
required filter media for the recharge system as
per site requirement.
122 Supplying slotted PVC pipes of approved quality 100.00 Rmt 555.50
at site of work confirming to IS. 1239/1974
180mm dia.
123 Cleaning & maintenance of system Including all 2.00 Nos. 4646.00
Labour and replacing of Filter Media as Required
for one year
124 Constructing brick masonry chamber for 15.00 No. 7723.47
underground C.I. Inspection chamber and bends
with briocks having croshing strength not less
than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame
(Light duty) 455mm x 610mm intenal
dimensions, total weight of cover with frame to
be not less than 38Kg. (Wt. of cover 23 Kg.) and
Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4
mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete
1:5:10 inside plaster 15mm thick with cement
mortar 1:3 finished smooth with a floating coat
of neat cement on walls and bed concrete etc.
complete.(iii) Inside dimensions 600mm x
mm and 450mm deep for pipe lines with three
or more inlets.
125 Providing and fixing concertina coil fencing with 188.00 Rmt 353.50
punched tape concertina coil 600 mm dia 10 mt
openable length having 50 no rounds per 6 mt
length, including angle iron (50mm x50mm
x5mm )requird shaped As per Directed
Engeenier in charge. placed 2.4mt or 3.00mt
apart and with 4 horizontal R.B.T. reinforced
barbed wire(3 mm) , stud tied with G.I. staples
and G.I. clips to retain horizontal, including
necessary bolts or G.I.barbed wire tied to angle
iron, all complete as per direction of Engineer-in-
charge, with reinforced barbed tape
(R.B.T.)/Spring core (2.5 mm thick) and weight
43.478 gm/meter at compound wall
Item Rate In
Description of Item Quantity Unit Amount
No figures
126 Supply. installation, testing & commissioning of 1.00 No 98432.20
ISI approved electrical motor driven jockey
pump set having 10.8 m3/hr. @ 70m head. The
pump unit shall be a horizontally direct mounted
motor. Unit shall comprise the following
minimum requirements: a) Pump, b) Electric
motor IE2, c) Foundation bolts, d) Mating flanges
with gasket and fasteners, e) Discharge gauges,
etc. complete in all respect, with labour.
127 Supply, installation, testing & commissioning of 1.00 No 25677.97
Priming tank, HDPE type, 1000 litres, with
necessary piping 100 mm size, G.I pipe for
priming the pumps, pipe of with butterfly valves
for isolation, Water Filling to priming tank by
piping min. 50 mm size, with all complete.
128 Supply, installation, testing & commissioning of 1.00 No 55635.59
Manifold( surge vessel,)for fire hydrant system,
min. 300 mm diameter, made from M.S plate,
hydro tested to 15 kg./cm2. with ball valves,
header with couplings for fitting pressure
switches, pressure gauges etc.with necessary
isolation valves with all complete.
129 Supply, fabrication & erection of aboveground 65.00 Mtr 398.01
G.I. 'C'-Class, ERW piping, conforming to
IS:1239, part-I, Heavy class up to 150 mm dia.
and IS:3589, for size 200 mm dia. & above,
thickness. G.I. pipe fitting's as per IS: 1239, part-
II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts
bolts & washers, 3 mm thick gasket, pipe
hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the
system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and
two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved
drawings, specicification and direction of the
Engineer-in-Charge, with all complete.
25 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
130 Supply, fabrication & erection of aboveground 65.00 Mtr 641.95
G.I. 'C'-Class, ERW piping, conforming to
IS:1239, part-I, Heavy class up to 150 mm dia.
and IS:3589, for size 200 mm dia. & above,
thickness. G.I. pipe fitting's as per IS: 1239, part-
II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts
bolts & washers, 3 mm thick gasket, pipe
hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the
system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and
two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved
drawings, specicification and direction of the
Engineer-in-Charge, with all complete.
50 mm dia.
131 Supply, fabrication & erection of aboveground 70.00 Mtr 1176.91
G.I. 'C'-Class, ERW piping, conforming to
IS:1239, part-I, Heavy class up to 150 mm dia.
and IS:3589, for size 200 mm dia. & above,
thickness. G.I. pipe fitting's as per IS: 1239, part-
II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts
bolts & washers, 3 mm thick gasket, pipe
hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the
system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and
two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved
drawings, specicification and direction of the
Engineer-in-Charge, with all complete.
80 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
132 Supply, fabrication & erection of aboveground 50.00 Mtr 1690.47
G.I. 'C'-Class, ERW piping, conforming to
IS:1239, part-I, Heavy class up to 150 mm dia.
and IS:3589, for size 200 mm dia. & above,
thickness. G.I. pipe fitting's as per IS: 1239, part-
II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts
bolts & washers, 3 mm thick gasket, pipe
hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the
system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and
two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved
drawings, specicification and direction of the
Engineer-in-Charge, with all complete.
100 mm dia.
133 Supply, fabrication & erection of aboveground 100.00 Mtr 2525.00
G.I. 'C'-Class, ERW piping, conforming to
IS:1239, part-I, Heavy class up to 150 mm dia.
and IS:3589, for size 200 mm dia. & above,
thickness. G.I. pipe fitting's as per IS: 1239, part-
II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts
bolts & washers, 3 mm thick gasket, pipe
hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the
system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and
two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved
drawings, specicification and direction of the
Engineer-in-Charge, with all complete.
150 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
134 Supply, fabrication & erection of aboveground 7.00 Mtr 3423.73
G.I. 'C'-Class, ERW piping, conforming to
IS:1239, part-I, Heavy class up to 150 mm dia.
and IS:3589, for size 200 mm dia. & above,
thickness. G.I. pipe fitting's as per IS: 1239, part-
II, Heavy class for size 150 mm dia. & below & IS:
3589, for size 200 mm dia. above, flanges, nuts
bolts & washers, 3 mm thick gasket, pipe
hangers, etc.
Hydrostatic testing for 2 hour's at 150% of the
system pressure, hook-up etc.
Painting for piping, fittings & structural pipe
support, shall be two coat of zinc primer and
two coats of fire red conf. to IS: 5, Shade
Complete with all accessories as per approved
drawings, specicification and direction of the
Engineer-in-Charge, with all complete.
200 mm dia.
135 Supply, installtion, testing & commissioing of 1.00 Mtr 2020.00
Underground GI (ERW) piping conforming to
IS:1239, part-I, Heavy class ('C' class) up to
mm dia. and IS:3589 Heavy class ('C' class), for
200 mm dia. & above, min. 6.35mm thickness
including Heavy class fittings, anti-corrosive
tape of size 150 mm wide x 4 mm thick,
wrapping & coating with 13KV holiday testing .
Rates shall include sand bedding of 75mm dia all
around, backfilling of the excavated including
installation of heavy pipe fitting's, flanges, etc.
% of all the welded joints shall be done
radiographically tested and 50% of the joints
radiographed shall be the "Field Joints".
Hydrostatic testing for 2 hours at 150% of the
system pressure, hook-up etc., complete with all
accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. (Road Crossing)
100 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
136 Supply, installtion, testing & commissioing of 10.00 Mtr 3047.12
Underground GI (ERW) piping conforming to
IS:1239, part-I, Heavy class ('C' class) up to
mm dia. and IS:3589 Heavy class ('C' class), for
200 mm dia. & above, min. 6.35mm thickness
including Heavy class fittings, anti-corrosive
tape of size 150 mm wide x 4 mm thick,
wrapping & coating with 13KV holiday testing .
Rates shall include sand bedding of 75mm dia all
around, backfilling of the excavated including
installation of heavy pipe fitting's, flanges, etc.
% of all the welded joints shall be done
radiographically tested and 50% of the joints
radiographed shall be the "Field Joints".
Hydrostatic testing for 2 hours at 150% of the
system pressure, hook-up etc., complete with all
accessories as per approved drawings,
specicification and direction of the Engineer-in-
Charge, with all complete. (Road Crossing)
150 mm dia.
137 Design , Supply and installation of Safety Signage 5400.00 Sq. inch 9.42
made of Zinc Sulphilde based glow in dark , Rigid
sheet with High Luminous property enclosed in
a transperent weather proof UV stabilized plastic
pasted on 3 mm thick clear acrylic sheet such as
EXITS, EMERGENCY EXIT, DO NOT USE LIFT
DURING FIRE, FLOOR MARKINGS, FIRE LIFT,
STAIRCASE EXIT, FIRE ALARM CALL POINT,
FIRE HOSE REEL, FIRE HYDRANT POINT etc.
138 Supply, Installtion, Testing & Commissioing of 60.00 No 556.36
Standard Response Sprinkler, Pendent Brass
Sprinkler, Quartzoid Bulb type with crome
finish, nickel crome platde, K factor K-80, Temp.-
680C, 1/2" end connection including resessed
escutcheon. (UL Listed).
139 Supply, installation, testing & commissioning of 3.00 No 2824.58
pressure switch. (Range 0 to 16 kg/cm2)
140 Supply, installation, testing & commissioning of 6.00 No 2738.98
150 mm dia. dial Burdon Type Glycerine Filled
pressure gauge with isolation ball valve
arrangements with necessary isolation valves
with all complete.( Range 0 to 15 kg/cm2)
141 Supply, installation, testing & commissioning of 2.00 No 5905.93
Cast iron body double flanged gate valve With
Rising Spinldle conf. to IS: 14846, PN-1.6 with
mating flanges, drilling as per IS/ANSI 150#
with mating flanges, galvanized nut, bolts &
washers, gasket 3 mm thick, etc., with all
complete. 50 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
142 Supply, installation, testing & commissioning of 1.00 No 8182.71
Cast iron body double flanged gate valve With
Rising Spinldle conf. to IS: 14846, PN-1.6 with
mating flanges, drilling as per IS/ANSI 150#
with mating flanges, galvanized nut, bolts &
washers, gasket 3 mm thick, etc., with all
complete. 80 mm dia.
143 Supply, installation, testing & commissioning of 1.00 No 10271.19
Cast iron body double flanged gate valve With
Rising Spinldle conf. to IS: 14846, PN-1.6 with
mating flanges, drilling as per IS/ANSI 150#
with mating flanges, galvanized nut, bolts &
washers, gasket 3 mm thick, etc., with all
complete. 100 mm dia.
144 Supply, installation, testing & commissioning of 1.00 No 15920.34
Cast iron body double flanged gate valve With
Rising Spinldle conf. to IS: 14846, PN-1.6 with
mating flanges, drilling as per IS/ANSI 150#
with mating flanges, galvanized nut, bolts &
washers, gasket 3 mm thick, etc., with all
complete. 150 mm dia.
145 Supply, Installation, Testing & Commissioning of 4.00 No 2011.44
Cast iron body Butterfly valve according to IS:
13095, PN-1.6, Iron Disc for size 150 mm dia. &
below Lever operated and above 150 mm dia.
Gear operated complete with mating flanges
/ANSI class # 150 with bolts & nuts washers,
rubber gaskets 3 mm thick, etc., with all
complete. 50 mm dia.
146 Supply, Installation, Testing & Commissioning of 2.00 No 2567.80
Cast iron body Butterfly valve according to IS:
13095, PN-1.6, Iron Disc for size 150 mm dia. &
below Lever operated and above 150 mm dia.
Gear operated complete with mating flanges
/ANSI class # 150 with bolts & nuts washers,
rubber gaskets 3 mm thick, etc., with all
complete. 80 mm dia.
147 Supply, Installation, Testing & Commissioning of 4.00 No 3124.15
Cast iron body Butterfly valve according to IS:
13095, PN-1.6, Iron Disc for size 150 mm dia. &
below Lever operated and above 150 mm dia.
Gear operated complete with mating flanges
/ANSI class # 150 with bolts & nuts washers,
rubber gaskets 3 mm thick, etc., with all
complete. 100 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
148 Supply, Installation, Testing & Commissioning of 4.00 No 4493.65
Cast iron body Butterfly valve according to IS:
13095, PN-1.6, Iron Disc for size 150 mm dia. &
below Lever operated and above 150 mm dia.
Gear operated complete with mating flanges
/ANSI class # 150 with bolts & nuts washers,
rubber gaskets 3 mm thick, etc., with all
complete. 150 mm dia.
149 Supply, installation, testing & commissioning of 1.00 No 1540.68
Cast iron body Dual Plate Wafer Type NRV conf.
to IS: 210, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets
mm thick, etc., with all complete Accessories.
150 Supply, installation, testing & commissioning of 1.00 No 2225.42
Cast iron body Dual Plate Wafer Type NRV conf.
to IS: 210, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets
mm thick, etc., with all complete Accessories.
151 Supply, installation, testing & commissioning of 2.00 No 3166.95
Cast iron body Dual Plate Wafer Type NRV conf.
to IS: 210, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets
mm thick, etc., with all complete Accessories.
100 mm dia.
152 Supply, installation, testing & commissioning of 1.00 No 5820.34
Cast iron body Dual Plate Wafer Type NRV conf.
to IS: 210, PN-1.6 complete with mating Flanges
class # 150 with bolts & nuts, washers, gaskets
mm thick, etc., with all complete Accessories.
150 mm dia.
153 Supply, installation, testing & commissioning of 1.00 No 1112.71
SG iron body SinglePlate Wafer Type NRV conf.
to ASTMA 536, PN-1.6 complete with mating
Flanges class # 150 with bolts & nuts, washers,
gaskets 3 mm thick, etc., with all complete.
Accessories. 50 mm dia.
154 Supply, installation, testing & commissioning of 1.00 No 1455.08
SG iron body SinglePlate Wafer Type NRV conf.
to ASTMA 536, PN-1.6 complete with mating
Flanges class # 150 with bolts & nuts, washers,
gaskets 3 mm thick, etc., with all complete.
Accessories. 80 mm dia.
155 Supply, installation, testing & commissioning of 1.00 No 1797.46
SG iron body SinglePlate Wafer Type NRV conf.
to ASTMA 536, PN-1.6 complete with mating
Flanges class # 150 with bolts & nuts, washers,
gaskets 3 mm thick, etc., with all complete.
Accessories. 100 mm dia.
156 Supply, installation, testing & commissioning of 1.00 No 5563.56
Y Type Strainer complete with mating flanges
with bolts & nuts, washers, gaskets 3 mm thick,
etc., with all complete accessories. 80 mm dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
157 Supply, installation, testing & commissioning of 2.00 No 7275.43
Y Type Strainer complete with mating flanges
with bolts & nuts, washers, gaskets 3 mm thick,
etc., with all complete accessories. 100 mm dia.
158 Supply, installation, testing & commissioning of 2.00 No 11555.09
Y Type Strainer complete with mating flanges
with bolts & nuts, washers, gaskets 3 mm thick,
etc., with all complete accessories. 150 mm dia.
159 Supply, installing, testing and commissioning of 1.00 No 4194.07
Normax make CI heavy duty ball type foot valve
with flanges, nut bolts, gaskets etc. with
necessary complete accessories. 80 mm dia.
160 Supply, installing, testing and commissioning of 1.00 No 6162.71
Normax make CI heavy duty ball type foot valve
with flanges, nut bolts, gaskets etc. with
necessary complete accessories. 100 mm dia.
161 Supply, installing, testing and commissioning of 1.00 No 12411.02
Normax make CI heavy duty ball type foot valve
with flanges, nut bolts, gaskets etc. with
necessary complete accessories. 150 mm dia.
162 Supply, installation, testing & commissioning of 1.00 No 8987.29
Four way fire brigade Inlet connection with
mm dia. stainless steel (SS304) instantaneous
male inlets with built in non return valve in each
inlet with 150 mm dia. header pipe, suitable
rubber cap and GI chain including nuts, bolts,
washers, gasket 3 mm thick, etc. with all
163 Supply, installation, testing & commissioning of 1.00 No 5135.59
Two way fire brigade Inlet connection with
mm dia. stainless steel (SS304) instantaneous
male inlets with built in non return valve in each
inlet with 100 mm dia. header pipe, suitable
rubber cap and GI chain including nuts, bolts,
washers, gasket 3 mm thick, etc. with all
164 Supplying FIRE bucket round bottom of 9 liters 8.00 No 1027.12
capacity made out of 24 gauge G.I Sheet with
extra handle at bottom duly painted white inside
and Red out side with FIRE mark. Filled with dry-
sand and kept on existing stand provided or
hung on wall hook.
165 Supplying and erecting floor mounting Stand for 2.00 No 5563.56
keeping four nos. of FIRE buckets comprising
1500 mm in length, 900 mm height frame made
out of 30mm x 30 mm x 4 mm angle iron with
cross supports legs, welded with 4 hooks and
duly painted with one coat of primer and two
coats of approved enamel P O red paint.
Item Rate In
Description of Item Quantity Unit Amount
No figures
166 Supply & installation of stainless steel body 12.00 No 1069.92
Orifice Plate of suitable inner bore along with
matching flange - as per specification &
requirement as per hydraulic calculation.
167 Providing and fixing approved make Perforated 15.00 Mtr 471.67
C type cable tray. Made from pre- galvanized
sheet steel. The cable tray should be bended as
per IS 2062/1079 . with max 17.5% perforation
with coupler plate / Fish plate and GI hardware
like nut - bolt and washers etc. erected on
existing support as per Specification and as per
instruction of engineer in charge..(5) 300 X 50 X
1.5 mm Thick
168 Providing and fixing approved make Perforated 15.00 Mtr 322.19
C type cable tray. Made from pre- galvanized
sheet steel. The cable tray should be bended as
per IS 2062/1079 . with max 17.5% perforation
with coupler plate / Fish plate and GI hardware
like nut - bolt and washers etc. erected on
existing support as per Specification and as per
instruction of engineer in charge..(3) 150 X 50 X
1.5 mm Thick
169 Supply, installation, testing & commissioning of 12.00 No 5435.17
Oblique pattern type stainless steel (SS 304)
single headed External Fire Hydrant Valve with
63 mm dia. female instantaneous outlet conf. to
IS: 5290, type - A, including mating flanges,
galvanised nuts, galvanised bolts/studs, washers
& gaskets 3 mm thick with all complete.
170 Supply, installation, testing & commissioning of 12.00 No 1754.66
63 mm dia. stainless steel (SS 304) Universal
Branch Pipe conf. to IS:
171 Supply & installation, testing & commissioing of 12.00 No 6967.29
Fire Fighting Hose - conf. to IS : 636, type B (type-
3), The fire hose shall be 15 m long with 63 mm
dia. stainless steel (SS 304) couplings conf. to IS:
903, at both the ends for connection with the
hydrant valve and the branch pipe.
172 Supply, installation, testing & commissioning of 12.00 No 2525.00
fabricated from 3 mm MS sheet, hose box of size-
450 mm x 600 mm x 250 mm - painted with Fire
Red as per IS: 5, shade no. 536 front 3 mm thick
transparent glass with lock & key, handle and
brass hinges - to accommodate one number of
15 mtr long hose and one number of universal
branch pipe, including supporting arrangement
with civil work.
Item Rate In
Description of Item Quantity Unit Amount
No figures
173 Supply, Installation, testing & commissioing of 12.00 No 7403.81
Swinging type mild steel hose reel drum with
mm dia. x 30 mtr. rubber hose as per IS: 884. The
mounting stand shall be of mild steel and the
hose shall be fitted with a SS shut-off nozzle & SS
ball valve of 25 mm dia. including supporting
arrangement with all complete. accessories
174 Supplying, fixing & testing of of CI ball Valve 20.00 No 706.14
25mm dia. (Thread)
175 Supplying, fixing & testing of New Battery of 1.00 No 15834.75
diesel engine 150 Amp.
176 Supply and installation of Diesel Tank For Diesel 1.00 No 16690.68
Engine With All Accessories 100 Ltrs.
177 Supplying, filling & testing lube oil for diesel 15.00 Ltrs 320.97
178 Supply and commissioning of Oil Filter. 1.00 No 706.14
179 Supplying, filling of diesel in diesel engine tank 50.00 Ltrs 89.87
180 Supply and commissioning of Diesel Filter 1.00 No 427.97
181 Supplying, filling & testing coolant to engine 20.00 Ltrs 239.66
cooling for radiator
182 Filling Of Gaps Between pipe and Core Cutting 30.00 No 299.58
Hole With Chemical and Cement
183 Steel work, welded in built up sections framed 250.00 Kg 90.48
work including cutting, hoisting, fixing in
position and applying a priming coat of read lead
paint & two coat oil paint. (A)In beams and
joists, channels angles Tees, flats, with
connecting plates or angle cleats as in main and
cross beams. Hip and jack rafters, purlins
conneted to common rafters and the like.
184 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 50.00 Mtr 136.35
unarmoured copper cable 1.1 KV grade to be
erected as directed of following size. (E) 3 core
2.5 Sq. mm for pressure switch
185 Providing and erecting XLPE(IS:7098)(I)-88 ISI 25.00 Mtr 285.83
armoured cable multistrand Copper conductor
for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe at road
crossing or floor of following size of cable. (Only
Fire Panel to Fire Pump) (B) 3 core 4 Sq. mm
186 Providing and erecting XLPE(IS:7098)(I)-88 ISI 35.00 Mtr 497.93
armoured cable multistrand Copper conductor
for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe at road
crossing or floor of following size of cable. (Only
Fire Panel to Fire Pump) (D) 3 core 10 Sq. mm
(Only Fire Panel to Fire Pump)
Item Rate In
Description of Item Quantity Unit Amount
No figures
187 Providing and erecting XLPE(IS:7098)(I)-88 ISI 30.00 Mtr 213.11
armoured cable multistrand Copper conductor
for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe at road
crossing or floor of following size of cable for
Diesel Engine Battery Charger (A) 3 core 2.5Sq.
188 Supply, Filling and Fixing of approved make ABC 15.00 No 1968.64
type fire extinguisher - 6 Kg. Capacity as per
189 Supply, Filling and Fixing of approved make CO2 15.00 No 5520.76
type fire extinguisher. Capacity 4.5 Kg.
(conforming to IS-15683).
190 Supply, Filling and Fixing of approved make ABC 3.00 No 3423.73
Moduler type automatic fire extinguisher.
Capacity 5 Kg. (conforming to IS-15683).
191 Submitting the application to obtain Fire Plan 1.00 No 136350.00
Approval and After Completion of Work Obtain
Final Fire NOC for 3 Year.
192 Supply, Installation and commissioning of Air 2.00 No 1412.29
Release Valve, 25 mm Dia. connection.
193 Supply, Installation and commissioning of Fire 1.00 No 21398.31
Alarm Panel Conventional type, 4 zone, with
complete accessories.
194 Supply, Installation and commissioning of smoke 5.00 No 1027.12
detectors / heat detectors, with complete
accessories.
195 Supply, Installation and commissioning of plug 5.00 No 256.78
in base for the smoke detectors, hooters, with
complete accessories.
196 Supply, Installation and commissioning of Audio 10.00 No 1069.92
hooters , with complete accessories.
197 Supply, Installation and commissioning of 10.00 No 1010.00
Manual Call Points, with complete accessories.
198 Providing and erecting XLPE(IS:7098)(I)-88 ISI 400.00 Mtr 176.75
armoured cable multistrand Copper conductor
for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe of following
size of cables (A) 2 core 2.5 Sq. mm for Fire
Alarm System
199 Core cutting in wall and in RCC slab with size as 6.00 No 342.37
below: 50 mm dia. Hole
200 Core cutting in wall and in RCC slab with size as 5.00 No 427.97
below: 80 mm dia. Hole
201 Core cutting in wall and in RCC slab with size as 5.00 No 513.56
below: 100 mm dia. Hole
202 Core cutting in wall and in RCC slab with size as 2.00 No 599.16
below: 150 mm dia. Hole
203 Core cutting in wall and in RCC slab with size as 10.00 No 855.93
below: 200 mm. dia.
Item Rate In
Description of Item Quantity Unit Amount
No figures
204 Supply, installation, testing & commissioning of 1.00 Set 204995.76
ISI approved electrical motor operated Kirloskar
make fire hydrant main pump set horizontal end
suction back pull out top discharge centrifugal
fire pump set with all the standard acessories,
base frame, coupling, and foundation bolts with
following specifications
Model -DB 80/26,
Flow-137 m3/hr,
Head-70 meter,
Motor Rating -45KW/60HP/3 ph
Suc x Del - 100 x
205 Supplying, Installation, Testing and 1.00 Set 447652.20
commissioning of Kirloskar make diesel engine
driven fire hydrant pump set suitable for
automatic operation and consisting of following:
horizontal type, centrifugal end suction back pull
out, top discharge pump of cast iron body &
bronze impeller with m.s.fabricated common
base plate, coupling, coupling guard, foundation
bolts etc.,as required.
Model -KFE
Flow-137 m3/hr,
Head-70 meter,
Engine - 62 HP / 3 ph
Suc x Del - 125 x
206 Fire Hydrant Panel suitable for 10 hp Jockey 1.00 No 101000.00
pump, 60 hp (137 m3/hr @ 70 m head) main
electrical pump and 62 hp (137 m3/hr @ 70 m
head) Diesel engine operated pump
A) Incomer
MCCB - 1 Nos
R Y B Indication - 1 Set
VAF Digital Meter - 1 Set
B) Outgoing
F1 60 HP Star Delta Starter - 1 For Main pump
F2 10 HP DOL Starter - 1 For Jockey Pump
F3 Auto - On / Off Diesel Pump With Battery
Control Circuit With Auto - Manual On/Off
On/Off Trip Indication
On/Off Push Button
C) Fabrication
Dully Powder Coated PO Red Colour,
Fabricated From 14/16 SWG,GI Sheet , IP-42
Protection,-Fixed Type Floor Mounted
Cable Entry : Bottom
207 Pay Legal Fees to Concern Authority for 6200.00 Sq.mt 8.08
Obtaining Plan Approval and Final NOC
208 3 year AMC for all fire fighting and fire alarm 3.00 Year 90900.00
system maintenance on every 6 months
periodical basis
Item Rate In
Description of Item Quantity Unit Amount
No figures
209 Box cutting the road surface to proper slope and 643.00 Cum. 104.20
camber for making a base for road work
including removing the excavated stuff and
depositing on the road side slope as directed
upto 50Mt.lead.
210 Providing, laying and compacting natural sand & 143.00 Cum. 324.21
gravel[ C.B.R. not less than 20%] below sub base
course including carriage of materials spreading
in uniform layer manually on prepared base and
compacted with vibratory roller to achieve
desired density including all materials, labour
etc. complete.
211 Construction of granular sub-base 150 mm thick 161.00 Cum. 1074.64
by providing coarse graded machine crushed
B.T. material satisfying MOST specification of
grading I (B.T. stone aggregate 53 mm to
mm 35 %, 26.5 to 4.75 mm - 45 % and 2.36 mm
below - 20 % )including spreading in uniform
layer with motor grader on prepared surface,
mixing by mix in place method with rotavator at
OMC and compacting with vibratory roller to
achieve the desired density etc. complete.
212 Providing and laying wet mix macadam base 353.00 Cum. 1264.52
course 250 mm thick in two layers using
machine crushed B.T. chips as per required
gradation mixing with required optimum
quantity of water, conveying the mix to site of
work, spreading in to grade and camber with
mechanical paver and consolidation each layer
with vibratory roller including cost of material
labour plant and equipment etc. complete.
213 Compaction and finishing of cement concrete 1071.00 Sqm 63.63
road by trimix process providing extra Labour
charges for the trimix vacume dewatering
service process on cement concrete road sutface
by using vacuum dewatering pump floater
surface vibrator including making groves and
rough finish to surface including leveling etc
214 Providing, laying (to level or slopes) and jointing 124.00 Rmt. 665.47
reinforced concrete Light duty non-pressure
pipes I.S. class NP2 of the following internal
diameter with collars and butt ends prepared for
collar joints including testing of joints complete.
Item Rate In
Description of Item Quantity Unit Amount
No figures
215 Providing and fixing decorative entrance gate 1010.00 kg 145.95
made out of cast iron and various mild steel
tabular section combination (Given as per detail
drawing), the Ornamental entrance gate should
be fixed at compound wall including pattern and
die making , cutting , welding , grinding,
fabrication , fixing in position at compound wall
with necessary pedestal, bearing block and other
locking arrangement. The entrance gate should
be painted with two coats of priming coat of
paint, and three coat of rubber paint (PU
Modified Alkys based finish) etc complete. As per
detail design and instruction of architect.
216 Point wiring for Light / Bell with 2-1.5 sq.mm 1127.00 Pt. 449.45
& earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in
below type of pipe erected with 6A Modular
type switch / bell push & accessories and earth
continuity of following type, erected on PVC /
Metallic/Wooden box, single mounting base
frame covered with textured/metallic/white
front plate modules erected on / in wall / ceiling
as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling
complete Cat. III
217 Point wiring for FAN with 2-1.5 sq.mm & earth 183.00 Pt. 629.23
wire of 1.5 sq.mm (Green) both are of .ISI
marked 1.1 KV Grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in
below type of pipe erected with 6A Modular
type switch and hum free EME step type
electronic fan regulator mounted and
accessories with earth continuity of following
type erected on PVC / Metallic/Wooden box,
single mounting base frame covered with
textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected.
with necessary ceiling rose / H.D.Connector as
directed. (f) with medium class Rigid PVC pipe
and accessories erected concealed in
wall/ceiling complete Cat. III
218 Point wiring for on board Looped Plug with 6A 390.00 Pt. 241.39
Modular type switch & 5 pin socket erected on
PVC / Metallic/Wooden box, single mounting
base frame covered with textured /
metallic/white front plate modules erected on
/ in wall / ceiling with following type accessories
Item Rate In
Description of Item Quantity Unit Amount
No figures
219 Point wiring for Two Way Controlled Light Point 192.00 Pt. 530.25
with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(green) both are of .ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires
erected in below type of pipe with 6A Modular
type switches and following type of accessories
erected on PVC / Metallic/Wooden box, single
mounting base frame covered with textured /
metallic/white front plate modules erected on /
in wall / ceiling as per pipe erected. with
necessary batten/angle holder or ceiling rose or
H.D.Connector as directed. (a) with medium
class Rigid PVC pipe and accessories erected
flushed on wall/ceiling complete Cat. III
220 Providing following type of Modular Type 480.00 Nos 144.43
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white
front plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (1)One No. SP 6 Amp. Cat.III
221 Providing following type of Modular Type 480.00 Nos 144.43
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white
front plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (2) One No 5 pin plug Cat.III
222 Providing following type of Modular Type 32.00 Nos 153.52
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white
front plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (3) Two Pin/RJ-11
Telephone Socket [A] For One Gang Cat.III
223 Providing following type of Modular Type 32.00 Nos 153.52
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white
front plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (4) TV Co-axial Socket outlet
Item Rate In
Description of Item Quantity Unit Amount
No figures
224 Providing following type of Modular Type 96.00 Nos 380.77
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white
front plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (5) Electronic hum Free
steps EME Fan regulator Cat.III
225 Providing following type of Modular Type 418.00 Nos 172.71
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white
front plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (9) 16 Amp. SP one way
switch Cat.III
226 Providing following type of Modular Type 418.00 Nos 190.89
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white
front plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (10) 6/16Amp. Universal
socket Cat.III
227 Providing following type of Modular Type 96.00 Nos 303.00
Accessories mounted with PVC /
metallic/Wooden box, single mounting base
frame covered with textured / metallic/white
front plate , modules erected with necessary
connections as per site situation directed by
Engineer In charge. (21) Foot Light as per colour
requirement with concealed box, modular
accessories, acrylic glass cover with suitable LED
watt with all accessories as per following module
(a) Two modules Cat-III
228 Providing and erecting ISI mark Medium class 1056.00 Mtr. 52.52
RIGID PVC PIPES of following size complete to
be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed
with adhesive solution & Clamps with following
dia of pipes, in approved manner as directed (c)
229 Supplying and laying UPVC cable trunking 100.00 Mtr. 265.63
system comprising unplasticised polyvinyl,
chloride rigid material with ignition free and
flame proof confirming BS with necessary end
caps Internal and external bend, flat bends,
coupler, tee etc..All necessary accessories and
measuring of following sizes (1) 75 mm x 50 mm
Item Rate In
Description of Item Quantity Unit Amount
No figures
230 Providing and erecting Mains with 1.1 KV grade 12652.00 Mtr. 78.78
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling,
with 1.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth
continuity of following size (A) With medium
class Rigid PVC pipe and accessories (b) 2 wire
231 Providing and erecting Mains with 1.1 KV grade 9900.00 Mtr. 107.06
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm
copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of
following size (A) with medium class Rigid PVC
pipe and accessories (a) 2 wire 4 sq. mm
232 Providing and erecting Mains with 1.1 KV grade 1120.00 Mtr. 248.46
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm
copper conductor FRLS PVC insulated stranded
wire of green colour for earth continuity of
following size (A) with medium class Rigid PVC
pipe and accessories (h) 4 wire 6 sq. mm
233 Providing and erecting Mains with ISI marked, 35.00 Mtr. 53.53
1.5KV grade electrolyte multi stranded, annealed
copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected
in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor
starters & control wiring) with required size of
copper lugs, nuts and bolts if required. (e) One
wire 6.00 sq. mm
234 Providing and erecting Mains with ISI marked, 30.00 Mtr. 87.87
1.5KV grade electrolyte multi stranded, annealed
copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected
in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor
starters & control wiring) with required size of
copper lugs, nuts and bolts if required. (f) One
wire 10.00 sq. mm
Item Rate In
Description of Item Quantity Unit Amount
No figures
235 Providing and erecting Mains with ISI marked, 10.00 Mtr. 225.23
1.5KV grade electrolyte multi stranded, annealed
copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected
in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor
starters & control wiring) with required size of
copper lugs, nuts and bolts if required. (h) One
wire 25.00 sq. mm
236 Providing & Erecting approved make following 1120.00 Mtr. 59.59
size of TV Co-axial flexible cable comprising
inner conductor of solid bare copper insulated
with Foam PE & Secondary conductor made of
poly - Aluminium film bonded Al. Braids @
suitable coverage overall sheathed with black
PVC insulation. [A] Conductor Size 0.5 mm (e)
237 Supplying & erecting approved make Telephone 1120.00 Mtr. 19.19
Cable electrolytic copper conductor PE
insulation twisted in two pairs, & wrapped with
FRLS PVC tape & sheathed with FRLS PVC or
HFFR outer Jacket suitable for telephone wiring
& confirming to C-DOT erected in existing pipe.
of following size of conductors & nos.of pairs.
With necessary connections. (2) Two Pairs
238 Providing & erecting main Distribution (MDF) 1.00 Ea 1678.62
indoor type, back mounted frame as per DoT
standard approved with krone strips (c) Suitable
for 50 pair
239 Providing & erecting Switch board for 32.00 Nos. 1081.71
Computer or electric apparatus consisting of
following modular type accessories mounted
with PVC / Metallic concealed/open box with
single mounting base frame covered with
textured/metallic /white front plate,modules
erected with necessary connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug
For Modular Type Accessories
240 Decorative call bell Ting-tong box type 250 volts 32.00 Nos. 68.68
complete erected
Item Rate In
Description of Item Quantity Unit Amount
No figures
241 Supplying and erecting LED indoor fittings with 549.00 Nos. 535.30
LEDs of wattage 0.2 Watt to 0.5 Watt assembled
on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel
conforming to IS: 513/CRCA/ aluminium die cast
powder coated and high U.V. & corrosion
resistance with diffuser with company
mark/name 160V to 270V, Power Factor more
than 0.95, THD < 15%, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt, LED driver
efficiency > 85 % (fitting required LM-79 & LM-
80 Certificates) (NOTE: Below description have
shown ranges of Wattage capacity of LED
wattage capacity between the ranges shown.)
(A) Tube Light with integral driver (v) 36-40
Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-
242 Supplying and erecting led lamps with following 288.00 Nos. 112.11
wattage capacity of 220 to 240 voltage,
minimum 15000 burning hours life, 500 V in
built-surge protection,Polycarbonate diffuser,
mounting suitable for E14 / E27 / B22 lamp
holders, pf >=
(A) LED Lamps integral type, with PC diffuser
suitable LAMP holder (ii) 5 to 8 watts
243 Supplying and erecting LED indoor fittings with 160.00 Nos. 589.84
LEDs of wattage 0.2 Watt to 0.5 Watt assembled
on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel
conforming to IS: 513/ CRCA/ aluminium
pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in
aluminium casted body with company
mark/name 160V to 270V,Power Factor more
than 0.95, THD < 15 %, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/ watt, LED driver
efficiency > 85 % ( fitting required LM-79 & LM-
80 Certificates) (NOTE: Below description have
shown ranges of Wattage capacity of LED
wattage capacity between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed
Mount Downlight with provision for spring
loaded mounting clips complete.IP20 (iii) 16-20
watts, Surge-2 KV Cat-III
Item Rate In
Description of Item Quantity Unit Amount
No figures
244 Supplying and erecting LED street light / Flood 23.00 Nos. 4997.48
light fittings with High power White LEDs
wattage of 3 Watt and above assembled on
single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast
aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with
diffuser and Polycarbonate optics/ lenses, with
toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power
Factor more than 0.95, THD < 10 %, CCT 3000 K
to 5700K, Uniformity ratio > 0.45, Luminaire
efficacy> 100 lumens/watt . LED driver
efficiency > 85 % (fittings required LM-79 & LM-
80 certificates) (NOTE: Below description have
shown ranges of Wattage capacity of LED
wattage capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV
integral and ,Light must have 440VAC line
supply with over-voltage protection. (ii) above
48 to 60 Watts Cat-III
245 (C) Post Top Lantern LED fitting comprises of 2.00 Nos. 4819.72
finish cast aluminum spigot and spun aluminum
canopy fixed with opal polycarbonate, pipe
arrangement for vertical mounting driver and
accessories wired upto terminal block.IP
(ii)32-40W Cat-III
246 Providing and erecting Approved make Four 6.00 Nos. 6173.12
pole moulded case circuit breaker having
breaking capacity ICU of 25 KA. at 415 V,having
normal current rating up to 25 A to 100A. with
Fixed thermal & magnetic release suitable to
work on A.C. supply 50 c/s. with all internal
connections, spreader tinned copper & complete
erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
247 Providing and erecting Approved make Four 1.00 Nos. 20946.39
pole moulded case circuit breaker having
breaking capacity ICU of 35 KA. and above at
V . having normal current rating 250A. with
variable thermal & magnetic release suitable to
work on A.C.supply 50 c/s. with all internal
connections, spreader tinned copper & complete
erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
Item Rate In
Description of Item Quantity Unit Amount
No figures
248 Providing and erecting Approved make Earth 1.00 Nos. 5415.62
fault Relay suitable to mount with inter
connection suitable to following size of moulded
case circuit breaker having CT ratio & MCCB
rating as following along with shunt trip 220V
AC. with all internal connections & complete
erected in existing M.S.housing.. (3) 250 A -400
A , CT Ratio 1/400
249 Supplying and erecting triple pole & neutral 1.30 Rmt 3202.71
440V / 500V panel mounting Copper Busbars
with four equal Nos. of electrolyte bus having
current density not more than 1.6 Amp. / sq.mm
(Rated current / cross section area) duly
wrapped with colour insulating tape for phase
sequence of following current carrying capacity,
erected with necessary bus bar supports
/insulators, main cable socket to each bar,
erected in existing cubical panel with necessary
connections. (B) Suitable for 200 Amp. capacity
250 Providing and erecting Miniature circuit breaker 25.00 Nos. 270.68
single pole 0.5A to 2A system and having
breaking capacity 10 KA to be erected in
existing box. confirming to IS 8828/1996 with
ISI Mark Cat.III
251 Providing and erecting Miniature circuit breaker 412.00 Nos. 112.11
single pole 6A to 25A suitable to operate on
V A.C. system and having breaking capacity
KA to be erected in existing box. confirming to IS
8828/1996 with ISI Mark Cat.III
252 Providing & erecting 240 V MCB double pole 5.00 Nos. 330.27
switch for motor & inductive load (C Curve)
having 10 KA breaking capacity & confirms to IS
: 8828 in existing box having following capacity
(B) 40 Amp. Cat.III
253 Providing & erecting 415 V MCB Four Pole for 74.00 Nos. 737.30
Motor & Inductive Load (C Curve) having 10KA
breaking capacity & confirms to IS :8828 in
existing box having following capacity (c)63
Amp. Cat.III
254 Providing and erecting Sheet Steel powder 34.00 Nos. 2339.16
coated MCB distribution board - flush / surface
mounted fitted with busbar, neutral link, earth
bar and DIN rail, Conforms to IS 8623-1 & 3, IEC
61439-1 & 3 without MCB to house appropriate
nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for (B)
three phase incoming and single phase
horizontal type outgoing Per phase isolation
type (PPI) (b) sheet steel double door (i) 4 way
Item Rate In
Description of Item Quantity Unit Amount
No figures
255 Providing and erecting Approved make RCCBs 102.00 Nos. 2235.13
conforming to IS: 12640 and having sensitivity
of 30 mA and Short Circuit withstand capacity of
10 KA and suitable for operation on single phase
240 V,50Hz. having characteristic of quick action
& tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed (ii)
40Amps. DP Cat. III
256 Supplying & fixing box for housing RCCB + MCB 36.00 Nos. 446.42
combination made of 18 SWG sheet steel duly
powder coated with gasket, dust & vermin proof
bakelite shield two earthing terminals for
following type of RCCB, RCCB + MCB[b] For
257 Providing and erecting Annealed bare Copper 5.00 Kg. 794.87
wire 8 to 16 SWG.
258 Supplying & erecting earth pit of minimum bore 5.00 Nos. 4519.46
dia.150mm size approved make Earthing
Electrode consisting Pipe-in-Pipe Technology as
per IS 3043-1987 made of corrosion free hot
dipped G.I.Pipes having Outer pipe dia of 50mm
having 80-200 Micron galvanising, Inner pipe
dia of 25 mm having 200-250 Micron
galvanising, connection terminal dia of 12mm
with constant ohmic value surrounded by highly
conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test
certificate including value of earth resistance of
installation duly stamped and signed by agency
and officer Incharge has to ensure the value of
earthing resistane mentioned in test Certificate)
& having back filling compound of (B) Inner
chemical (CCM Compound)- Resistivity:-
ohm / meter testing as per IEC 62561-2017,
Voltage drop:- < 1 volt at no load & dry form,
Sulphar content:- <2%(C) Back fill Compound :-
Earthing compound should be capable to retain
moisture for long time Necessary test report
must be submitted by Agency. (a) For Electrical
Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
259 (c) For Electrical Installation covering 4.00 Nos. 8636.51
Transformer Neutrals, Lightning arrester
Earthing, A.C.Plant & Sensitive Computer
System(like Automation, SCADA) i.e
independent Earthing in normal soil.
Length of Pipe : 3.00 mtrs
Back filling Compound :2 nos Bags of 25 Kg.
Item Rate In
Description of Item Quantity Unit Amount
No figures
260 Providing & erecting weather proof, dust & 4.50 Smt. 14902.55
vermin proof, floor mounted front operated
indoor type cubical panel board necessary IP-42
and above protection as per approval from
engineer incharge made from 14 SWG thick CRC
M.S. sheet for outer body & doors, 16 SWG thick
CRC M.S.sheet for internal partitions with
necessary accesories , supporting angles/ flats
channel including cutting, bending, drilling,
welding, riveting with internal partitions & cable
alley as per requirements & instruction of
engineer-in-charge with erection of supplied
switch gears, BUSBARS, suitable size of inter
connecting PVC copper wire / copper-
aluminium strips, rubber grommets, rib, bakelite
control fuses/MCB for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors,
handles with locking arrangement and rubber
gasket,heavy duty end terminal
connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel
shall be painted with epoxy powder coating.
(The rates excludes the cost of switchgears, bus
bars, inter connecting mains & Copper
Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with
261 following
Providing approved manufacturers
, erecting withthe M.S.
, fabricating 20.00 Kg. 77.77
structure as per requirement on site
incorporating proper size of M.S.
angles,square,round, flats, bars, channels,
sections complete with cutting, welding,
grinding & finishing duly painted with one coat
of red oxide with erection on site as per
direction of engineer in charge with necessary
grouting, cementing, plastering & finishing
262 Providing and erecting XLPE (IS:7098) (I)-88 ISI 120.00 Mtr. 90.90
armoured cable Aluminium conductor for
KV. to be laid on wall with necessary clamps or
in existing trench / pipe of following size of
cables. (B) 2 core 6 Sq. mm
263 Providing and erecting XLPE(IS:7098) (I)-88 ISI 170.00 Mtr. 281.79
armoured cable multistrand Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (C) 3 1/2 core 50 Sq.
mm ( 25 Sq.1/2 mm core)
Item Rate In
Description of Item Quantity Unit Amount
No figures
264 Providing and erecting XLPE(IS:7098) (I)-88 ISI 150.00 Mtr. 534.29
armoured cable multistrand Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (F) 3 1/2 core 120 Sq.
mm ( 70 Sq. mm 1/2 core)
265 Providing and erecting XLPE (IS:7098)(I)-88 ISI 310.00 Mtr. 124.23
armoured cable multistrand / Solid Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (B) 4 core 6 Sq. mm
266 Providing and erecting XLPE (IS:7098)(I)-88 ISI 120.00 Mtr. 188.87
armoured cable multistrand Aluminium
conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of
following size of cables (B) 4 core 25 Sq. mm
267 Making trench in soft soil of suitable width of 90 500.00 Mtr. 46.46
cm deep for laying cable or locating the fault all
over the run and back filling the same and
making the surface as normal ground.
268 Providing & laying. R.C.C. Hume pipe for cable to 60.00 Mtr. 263.61
be laid 90 cm. below ground across the road
crossing or on floor with necessary material in
an approved manner and making the ground as
per original. (E)150 mm dia
269 Providing & laying approved make Double 490.00 Mtr. 62.62
walled corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II) with
necessary connecting accessories of same
material at required depth in existing trench for
laying of cable. below ground / road surface for
enclosing cable (A)50 mm outer dia
270 Providing and, fixing heavy duty flange type 20.00 Nos. 38.38
brass cable gland with rubber ring for PVC
insulated armoured cable complete with out
going tails, insulating tape etc for following size
of cables. (B) 2 to 4 core 6 Sq. mm
271 Providing and, fixing heavy duty flange type 6.00 Nos. 75.75
brass double compression type cable gland
with rubber ring for PVC insulated armoured
cable complete with out going tails, insulating
tape etc for following size of cables. (B) 3 & 1/2
core 35/50 Sq. mm
272 Providing and, fixing heavy duty flange type 150.00 Nos. 140.39
brass double compression type cable gland
with rubber ring for PVC insulated armoured
cable complete with out going tails, insulating
tape etc for following size of cables. (E) 3 & 1/2
core 120 Sq. mm
Item Rate In
Description of Item Quantity Unit Amount
No figures
273 Solder less crimping type Aluminium lugs 48.00 Nos. 6.06
conforming to IS suitable for cable of following
size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/
cadmium plated nut bolts in an approved
manner. (A) 1.5/ 2.5/4/6 Sq.mm
274 Solder less crimping type Aluminium lugs 24.00 Nos. 20.20
conforming to IS suitable for cable of following
size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/
cadmium plated nut bolts in an approved
manner. (D) 35/50 Sq.mm.
275 Solder less crimping type Aluminium lugs 8.00 Nos. 45.45
conforming to IS suitable for cable of following
size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/
cadmium plated nut bolts in an approved
manner. (G) 120 Sq.mm.
276 Providing and fixing approved make Perforated 300.00 mtr 496.92
C type cable tray. Made from sheet steel. The
cable tray should be single or double bended as
per required and as per IS 2062/1079 and shall
be coated with hot dip galvanizing as per IS
2629/4759. with max 17.5% perforation with
coupler plate / Fish plate and GI hardware like
nut - bolt and washers etc. erection with
necessary support( included) as per
Specification and as per instruction of engineer
in charge.. (4) 200 X 50 X 1.6 mm Thick
277 Providing and erecting Approved make Ceiling 279.00 Nos. 1596.81
fan with double ball bearing ISI mark with
condenser A.C. 23OV.50 c/s.1200 mm. sweep
complete, canopy erected on existing hook or
clamp with earthing. [Make shall be approved by
Engineer in charge] (B) 1200 mm Sweep (48")
278 Supplying and erecting 19 / 20 mm. nominal 279.00 Mtr. 108.07
bore Medium Class M.S. Pipe down rod erected
duly painted for fan complete with proper
insulation without leakage and earthing.
279 Supplying & erecting fan hook box of 10 mm 279.00 Nos. 108.07
M.S. round bar bounded to the RCC bars up to
50mm length each side and pierced through a
16 Gauge M.S. box / Heavy Duty PVC box
complete erected concealed in Ceiling with
necessary finishing
Item Rate In
Description of Item Quantity Unit Amount
No figures
280 Supplying & erecting single phase approved 98.00 Nos. 2054.34
make industrial exhaust fan suitable for medium
duty ring mounted low noise operation suitable
for medium duty having following dia size and
maximum speed in RPM [A] 305 mm dia
281 Supplying and erecting approved make 9.00 Nos. 6874.06
Octagonal pole made from HR sheet steel. The
pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS
2629/2633/4759, suitable suspend local wind
speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB
Mounting, stud type terminal and arrangement
for cable termination to be erected With
Suitable foundation (Included) as per details
given by manufacturer considering site
requirement. (C) 5 Mtr. Long 70 mm Top X
mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4-M16 Bolts
and 600mm long with necessary G.I. J Bolts
.Approx Pole weight 46 kg
282 Supplying & erecting approved make SMC press 14.00 Nos. 476.72
moulded composite FRP. loop-in, loop-out
approx. 2mm thick box complete with Bakelite
connector strip 5way(3P+N+E),DIN rail for
mounting mob & hinged doors as per
requirement having locking arrangements with
mounting clamp with nuts, bolts & washers
suitable for erection on pole with cable clamps&
earth bolt of following size of box. (C)150mm x
125mm x 100mm [deep]
283 Providing and erecting street light pole bracket 4.00 Nos. 491.87
comprising main B Class GI pipe of
cm/require outside dia. complete with suitable B
Class G.I sleeve tubing of approx. 45cms.length
and suitable for 76.5 mm / 80mm. / require size
pole top having sufficient fasteners for fixing the
brackets and having spread of 1 mtr. length with
suitable rise as per site condition & suitable
welded stiffener reducer and nipple with check
nut complete painted with one coat of Red oxide
/ PU base primer and two coats of Aluminium /
PU paint. paint with following nos of arms. [A]
Single Arm bracket 0.5 Mtr
Item Rate In
Description of Item Quantity Unit Amount
No figures
284 Providing and erecting street light pole bracket 2.00 Nos. 622.16
comprising main B Class GI pipe of
cm/require outside dia. complete with suitable B
Class G.I sleeve tubing of approx. 45cms.length
and suitable for 76.5 mm / 80mm. / require size
pole top having sufficient fasteners for fixing the
brackets and having spread of 1 mtr. length with
suitable rise as per site condition & suitable
welded stiffener reducer and nipple with check
nut complete painted with one coat of Red oxide
/ PU base primer and two coats of Aluminium /
PU paint. paint with following nos of arms.[B]
Double Arm Bracket 0.5 Mtr
285 Supplying and erecting B class galvanised iron 12.00 mtr 343.40
pipe 32 mm outside dia 45 cm long duly welded
on 20 cm x 20 cm x 3 mm thick M.S. base plate,
erected on wall or corner for mounting street
light luminaire with necessary hardware
materials duly painted.
286 Supplying & erecting approved make IP 55 grade 2.00 Nos. 17059.91
Company fabricated Timer Panel of following
capacity for switch On-Off street lights on time
scheduling basis made from 16G CRCA sheet
duly epoxy power painted inside and outside
with hinged doors and locking arrangement
consisting of suitable size of 4 Pole MCB and
pole contactor (cat-III)with analog time switch,
auto manual switch of same make and suitable
input and output Bakelite terminals and with
door earthing approved by Engineer in charge.
287 Supplying and erecting approved make panel 1.00 Nos. 1275.63
mounting type Digital Voltmeter having 3 digits
LED display, 0 to 750 AC Volts range erected on
existing panel board with all connection, wiring
etc .with manufacturers calibration certificate.
288 Supplying and erecting approved make panel 1.00 Nos. 1558.43
mounting type Digital Ammeter having 3 digits
LED display, external CT operated, calibrated for
0 to 1000 Amps suitable to operate on 500 Volt
AC , erected on existing panel board with all
connection, wiring etc .with manufacturers
calibration certificate.
289 Supplying and erecting Ammeter / Voltmeter 2.00 Nos. 317.14
existing panel board with necessary connections.
290 Providing & erecting L.T. Current Transformer 1.00 Nos. 274.72
with bar primary 50/5 to 1000/5 ratio 15 VA
burden erected in existing CRCA box duly
secured with insulating materials connected to
Item Rate In
Description of Item Quantity Unit Amount
No figures
291 Supplying and erecting approved make suitable 3.00 Nos. 43.43
panel indicator LED type lamp, lens cover,
complete erected with necessary connections.
292 SITC of Vertical Air Termination Solid 4.00 Nos. 9416.23
aluminium with Base- 10 mm dia and 1000 mm
long. Air Termination Base tested for
conditioning, Ageing Test & Lightning impulse
current withstand test: 100 kA of 10/350µs
waveform in an accredited Third party
laboratory as per 6.3 & 6.4 of IEC 62561-1
protocol with MAST 34mm dia 3000 mm long-
Cold Galvanized
293 SITC of 8 mm dia solid Aluminium Conductor for 220.00 Mtr 299.97
roof top mesh grid and tested as per IEC 62561-
2 conducted in the Govt. accredited thirty party
laboratory to meet the requirement of IS/IEC
62305 with Required Accessories - Aluminium
Holding clamp at every 1 mtr distance,
Aluminium/SS cross splicer at every crossing of
Alu. conductor, Expansion piece with connectors
at every 20 mtr distance, Aluminium straight
Splicer to connect conductors. All Accessories
should be tested as per IEC 62561-1 2018 Cl.
for conditioning & Ageing Test & 6.4 for
Lightning impulse current withstand test:
kA of 10/350µs waveform(Ageing & Electrical
test ) conducted in a sequence manner & tested
in the Govt. accredited Third party laboratory to
meet the requirements of IS/IEC
Item Rate In
Description of Item Quantity Unit Amount
No figures
294 SITC of 10 mm MS Round Solid Conductor 220.00 Mtr 728.21
having smooth surface Should be tested and use
exclusively for lightning protection (Vertical
Riser/Down Conductor which shall be concealed
in Column OR Flushed on) to meet the
requirement of IS IEC 62305 With Accessories -
Earthing stud of dimension SS-75mm OD plate
with 10mm dia tail connector used in structural
steel ring earthing system to meet the
requirements of IS/IEC 62305. (For
Interconnecting the Column and the Terrace AL
Conductor / Strip/Flat), SS Cross Connector to
connect Earth fixing point to vertical
raiser/Down conductor, SS Straight Splicer at
every 4 Mtr to connect MS conductor in column,
Bonding /Rebar Clamp at every 3 mtr suitable
for interconnecting round conductor with
reinforcement inside the concrete for structural
earthing system, SS connector -To connect
external conductor 8- 10 mm with earth fixing
point. All Accessories should be tested as per
IEC 62561-1 2018 Cl. 6.3 for conditioning &
Ageing Test & 6.4 for Lightning impulse current
withstand test: 100 kA of 10/350µs
waveform(Ageing & Electrical test )Conducted in
a sequence manner & tested in the Govt.
accredited Third party laboratory to meet the
requirements of IS/IEC
295 SITC of Galvanized Steel Flat 25x6 mm thickness 40.00 mtr 154.53
from earth electrode directly in ground as
required. Zinc coating: 500 g/m square
(Approx:70 micron coating) tested and used
exclusively for lightning protection earthing
system and ring equipotential bonding.
296 SITC of 14.2 mm dia 3 mtr long Earth electrode 4.00 Per Set 5992.33
of High tensile steel electrode with 250 micron
copper bonding & 1 bag of Carbon fill Based
environment friendly backfill tested as per IEC
62561-7 in NABL accredited Laboratory and
suitable stainless Steel double sided clamp. Eco
Friendly rust proof heavy duty weather proof
Polyethylene Earth Pit Chamber with following
dimensions :254 mm dia (top), 330 mm dia
(bottom) & 260 mm (height). ENERGY AUDIT &
SAFETY AUDIT
297 Supplying, Erecting, Testing & Commissioning 2.00 Nos. 2252563.61
the passenger/ stretcher MRL lift having
following main features: (A) GENERAL
DESCRIPTION OF LIFTS. (Duplex System)
Item Rate In
Description of Item Quantity Unit Amount
No figures
[1] GEAR LESS LIFT DRIVE (MRL) comprising of
High Starting torque Lift 3 phase 440 V A. C.
Permanent Magnet Synchronous motor of
proper rating with high efficiency shall be used.
[2] Micro processor based / PLC, ACVVVF, vector
control drive with encoder feedback closed loop
system shall be used for lift car and door
operation hall call demand response, UP/DOWN
hall stops, Main, Up/ Down Contactor with
overload and phase reversal relay and safety
[3] Car with M S platform with bracings of
adequate size and to sustain the impact load
cabin + passenger with safety factor of fire for
steel and side panels of Stainless steel of sheet of
grade 304 duty. Car ceiling will be S.S. finishes
with aesthetic appearance with LED ceiling
lights. Car flooring shall be of anti skid PVC with
choice of colour of engineer in charge. Car doors
shall be of stainless steel grade 304, hairline
finish with centre opening / telescopic automatic
doors. Car panel will also be S.S. 304 finished
with emergency stop device, mechanical door
safety device, facility of auto/ attended mode. All
car panel buttons and all floor switches must be
with brail language as per lift act.
[4] All landing doors must be fire rated for
hour shall be fully automatic centre opening/
telescopic opening made of hairline finish steel
grade of 304 with key holes and infrared
curtains with Unlocking facility from outside
[5] Appropriate battery operated emergency
light in the car along with alarm switch shall be
provided. Also, Emergency Light & Fan should
start immediately without any Time Delay as
soon as power fails.
[6] Digital scrolling indicator system for up-
down arrow along with floor position indicator
shall be provided inside the car and at all floors.
[7] Full height infra red curtain with multiple
cross / crossing light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be
provided accordingly of passenger capacity with
Manual Rescue Operation ( Manual Cranking
Facility).
[9] Audio visual indication in the lift car showing
over loading shall be provided such that doors
kept open till excess load is removed.
Item Rate In
Description of Item Quantity Unit Amount
No figures
[10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with
automatic sleep timer shall be provided.
[12] Voice annunciator with suitable music shall
be provided in lift car.
[13] Self diagnostics system for operational and
safety parameters shall be provided in control
[14] Mechanical over speed governor with
governor calibration as per actual site
parameters and submission of calibration
certificate submission, door key holes in the
floor doors, fireman switch shall be provided.
[15] Lift machine hoisting arrangement in the lift
machine room and monkey ladder for lift pit
should be provided by the lift agency, along with
the other steel structure works, foundations for
the machine etc…
[16] In the hoist way fascia plate shall be
provided without any extra cost, where ever
required as / if directed by engineer in charge.
[17] Permanent wiring with necessary safety
devices like RCCB in all circuit, Over Voltage
Under Voltage protection and THD eliminator in
circuit for lift machine room and lift well with
proper numbers of light points, with fixtures,
exhaust fan and plug points shall be provided by
the agency. Only 3 phase Power Supply shall be
made available by department in lift machine
room. Necessary Earthing as per Lift Act/Rules
shall be arranged by Lift Agency.
[18] Any civil/ electrical works for additional
and alteration in lift shaft and machine room
related to erection of lift shall be made by lift
agency without any extra cost. (granite/marble
fixing around all landing door openings are not
in lift agency’s scope.)
[19] Agency has to provide all working drawings
and documents and liaison services for obtaining
all necessary permission from lift inspector and
other authorities.
[20] acrylic transparent licence/display A4 size
holder in lift car
Item Rate In
Description of Item Quantity Unit Amount
No figures
[20A] As per statutory requirement of Govt. Of
Gujarat lift & escalator act 2000, lift agency has
to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor.
4.carrying out third party lift inspection
during/after lift erection and provide report by
third party authorized by concern licensing
authority 5.agency has to provide third party
insurance upto completion of free maintenance
period and submit the document for the same.
[21] Car Panel Operating Buttons with floor
position indicator/buttons must be of Auto Glow
type clearly visible when view from inside cabin.
[22] For Physically Handicapped person Full
Length Handrails of hairline finish steel grade of
304 should be provided at appropriate height
on the Rear & Side Wall Panels in Lift Car.
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS
for PREMIUM category
1. Advanced control system dual 64 bit
embedded microprocessor with CANBUS Serial
Communication mode including Regenerative
power efficient operation,on site programming
facility, Anti nuisance, Pte-opening, BMS/RMS
with necessary online real time monitoring
system having necessary connectivity for remote
monitoring & other suitable supporting
hardware & software devices to fulfil the
2. Floor Indication LCD Display with call
registration & brail mark with arrival gong and
hall lantern & TFT Screen in the car with MP3
Voice Announcer.
3. CAR Panel should be Scratch resistive SS
Moonrock finish / Hair Line / Honeycomb for
car and all Doors, All landing doors must have
fire rating up to 2 hours and car door must have
multi-level crisscross beam door protection.
4. To & fro communication system & wiring (i.e.
car , control room & guard room ) and Each
elevator are equipped with remote monitoring
system.agency has to provide mobile app and
user id and password for monitoring
8 / 10 Passengers, Ground plus 8 upper floor
with Rated Speed of 1.5 / 1.75 / 2.0 m/sec.,
Item Rate In
Description of Item Quantity Unit Amount
No figures
(C) With General PLUS ADDITIONAL SPECIAL
FEATURES attached here with Prem. Cat.
(Duplex System)
Total Rs.
I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures
and words) of the estimated rate mentioned above. Amount of my /our
Tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:
PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.
4 items where there is a change as per actual mix design the cost of difference of cement consumption
have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Deputy Executive Engineer Executive Engineer
Surat (R&B) Sub-Division 1 Surat (R&B) Division No.1
Surat Surat
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
0 Scope of work E-Type Judges Quarter Surat (2 side).pdf
1.0 GRs - SBD with Index (2 side)_Final.pdf
1.1 Unique Code Certificate.pdf
1.2 P.Q. E-Type Judges Quarter Surat (1 side)_1.pdf
1.3 PROFORMA (2 side).pdf
1.4 Pragati G.pdf
1.5 Special Conditions of Contract.pdf
2 BOQ E-Type Judges Quarter Surat (1 side)_1.pdf
2 BOQ E-Type Judges Quarter Surat (1 side)_2.pdf
3 Item Wise Specification E-Type Judges Quarter Surat (2 side).pdf
4 Building-Specification Booklet (2 side) (2).pdf
Drawings.pdf
2.0 Special condion Electric.pdf
2.0 Lift AMC Condition-PART IV After Price BID 02_01_2023.pdf
3.0 NOMINATED ELECTRICAL SUB CONTRACTORS.pdf
3.0MOU Electrical Work.pdf
5 GeneralSpecification for LIFT.pdf
6.0 Special condition of Lift.pdf
7.0 Revise Yearly Lift Maintanance and Clause.pdf
8.0 Approved make list 2013 2014 Part 1.pdf
8.0 Approved make list 2013 2014 Part 2.pdf
9.0 Extra Access GR-1.pdf
9.0 Extra Access GR-2.pdf
10.0 Division schedule-b.pdf
11.0 ANNEXURE-2.pdf
PQ Criteria of Tenders for Installation of Lifts Work.pdf
SCHEDULE-B.pdf
0.0 SBD E-Type Judges Quarter Surat (2 side).pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].