CA NO.CWE BLY/GE (W)/ 35 OF 2020-21 PROVN OF SECURITY FENCING AT NURSING OFFRS MESS AND RCC WALL WITH SWAN NECK BARBED WIRE FENCING AT MH BAREILLY UNDER GE (WEST) BAREILLY

Amount

Excavation in trenches not exc. 1.50 m wide and not exceeding 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exceeding 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance n. exc. 50 m and and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for foundation filling and mass concrete complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spaces and binders cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits(if any) of foundation and plinth beams and similar work vertical or batter for rough finished surfaces.

M & L for form work to sides of pillars, posts, struts, piers, columns for rough finished surfaces of concrete complete all as specified and directed.

M&L for providing reinforced cement concrete M25 as in foundation,, including rafts, footings, foundation beams, plinth beams, bases of columns etc complete all as specified and directed.

M&L for providing reinforced cement concrete M25 as in columns, piers, posts and struts etc complete all as specified and directed.

M&L for providing reinforced cement concrete M25 as in coping including form work complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar 1: 4 on fair faces of bricks wall or concrete surfaces finishing the surface even and fair to receive tiles/granite/kota stone complete all as specified and directed.

M&L Brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm 1:4 complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1: 4 on bricks wall or concrete surfaces finishing the surface even and fair complete all as specified and directed.

M & L for applying two coats of cement based paint on wall surface over a coat of cement wash including preparing of un decorated surfaces complete all as specified and directed.

S & F for framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc shall be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings complete all as specified and directed.

M & L for Granite stone slab(best quality) 13 to 15mm thick machine cut as on vertical surfaces of wall fixed and jointed with gray cement slurry and pointed with white cement with pigment to match the shade of granite stone including moulding, grinding and polishing complete all as specified and directed.

S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. complete all as specified and directed (each line of wire to be measured).

S & F joist, channel, angle or tee sections, fixed indepedently without connecting plates etc. (cut to ordinary length i.e. within 20mm of the length indicated) complete all as specified and directed.

M & L preparation of new steel surfaces of any description over 10cm width or girth (guide for roller) and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M/S Gupta Builders

SUBHASH CHANDRA AGARWAL

M/s Agarwal Builders

hardeep singh enterprises

M/S Harshri Nath Enterprises

REHAN CONSTRUCTION

Goel Enterprises

DIKSHA CONSTRUCTION CO

Shikhar ji Enterprises