Loading…
Loading…
Tender Value
₹3.8 L
EMD Value
₹9,500
Closing Date
17 Sept 2026, 6:00 pmClosed
EXECUTIVE ENGINEER, TDB, MAVELIKKARA
OFFICE OF THE EXECUTIVE ENGINEER, TDB, MAVELIKKARA-690101
Kaippuzha devaswom in Aranmula group-Constructing partition wall in between toilet and temple
2026_TDB_869595_1
EEM/ET-64/2026-27
Open Tender
Civil Works - Others
Percentage
45 days
Adoor
Please refer Tender documents.
8 documents required · 8 mandatory
₹944
₹9,500
23 Sept 2026
14 Sept 2026
18 Sept 2026
14 Sept 2026
17 Sept 2026
14 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Constructing of a New Partition Wall for Separating the Temple Boundary from the Toilet Block | |||||
| 1.001 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 21.17 | cum | 257.63 | ₹5,453.51 |
| 1.002 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 3.53 | cum | 7,932.89 | ₹27,987.24 |
| 1.003 | OD65249/2026-2027:Random rubble in CM 1:6 for foundation and basement | 17.64 | cum | 5,603.11 | ₹98,838.86 |
| 1.004 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.65 | cum | 9,963.93 | ₹26,364.56 |
| 1.005 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 216 | kilogram | 112.43 | ₹24,284.88 |
| 1.006 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 11.76 | sqm | 386.16 | ₹4,541.24 |
| 1.007 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 12.23 | cum | 7,279.03 | ₹89,000.7 |
| 1.008 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 158.88 | sqm | 369.76 | ₹58,745.99 |
| 1.009 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 158.88 | sqm | 209.26 | ₹33,246.39 |
stage.html
html • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.45 MB
IntegrityPact.pdf
Tender Documents • 0.05 MB
form_of_tender.pdf
Tender Documents • 0.19 MB
preliminary_agreement_new.pdf
Tender Documents • 0.22 MB
epaymentnew.pdf
Tender Documents • 0.16 MB
Affidavit.pdf
Tender Documents • 0.06 MB
BOQ_1473511.xls
BOQ • 0.32 MB
sbd64.pdf
Tender Documents • 1.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .