CONSTRUCTION OF NEW DEFICIENT WASHROOMS FOR SERVANT QUARTERS AT OMQS, PROVISION OF STORE ROOM AT MALHAR CAMP AND ADDN/ALTN TO SNCOs LIVE-IN ACCN AT MKP CAMP AT MAKARPURA AF STN BARODA

Amount

Taking down cement plaster of walls or roof ceiling of any description including raking out joints, hacking for key, scrubing down with water etc including cleaning site time to time without accumulating the debris in and around the working place complete all as specified and directed.

M&L for applying bonding coat (1:1:3) of modified styrene butadine emulsion (SBR bonding agent i.e Nitobond SBR 45 or approved equivalent) in proportion 1 ( Nitobond SBR-45) : 1 ( Water) :3 (Cement) by volume all as per manufacturers instructions with the brushes etc to bind new Cement Plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose/ disintegrated old concrete/ plaster, surface preparation etc as required complete all as specified and directed. Note: Rate quoted shall deemed to be inclusive of proper scaffolding/safety measures and tools etc. Dept shall not compromise any deviation on this safety measures

M&L for applying 15mm thick plaster in CM 1;3 ( on wall/ ceiling) with polymer modified mortar fortified with SBR ( Nitobond SBR 45 or approved equivalent) in proportion 1 (cement): 3 ( sand ) by weight 5 litres Nito bond SBR 45 to be added to 50 Kg cement including two coats of cement base paint complete all as specified and directed. Note: (i) Rate quoted shall deemed to be inclusive of proper scaffolding/safety measures and tools etc. Dept shall not compromise any deviation on this safety measures (ii) Nitobond SBR 45 shall be measured and paid seprately under item No 77.00 of BOQ

S & F in position steel reinforcement of approved make including cutting, bending, fabricating, making dowel, hooks, rings, providing spacers, plastic or steel chairs including binding, welding including wastage etc. complete all as specified and directed. Note : (i) TMT Bars of various size as required. (Actual reinforcement placed & fixed in position shall be measured for payment. (ii) Welding wherever necessary shall deemed to be included in the quoted rate.

M & L for applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement with the help of wire brush and treating it with rust remover (reebaklens RR) including thoroughly cleaning, washing, air blowing, brushing etc. including scaffolding as required complete all as specified and directed. Note : (Quantity of Zinc based epoxy rust preventor only shall be taken into account for payment purpose on the basis of actual consumption and quoted rates shall be deemed to be inclusive of this aspect.)

M & L filling of cracks by grouting epoxy complete all as specified and directed as under:- (a) Removal the plaster if any (100mm to 150mm wide along the crack) incase of non-exposed RCC work and Make 'V' grove along the crack. (b) Drill hole of suitable diameter and 35mm to 50mm (or more if required) deep @ 300mm to 500mm c/c along the crack. (c) Clean the grove and hole with wire brushes and air blower and surface shall be free from dust, oil and grease etc. (d) Seal the crack with epoxy putty and fix the 10mm dia (internal) PVC ports injection with epoxy putty. (e) Inject Moisture insensitive low viscous epoxy resin (Conbextra EP 10 M) with the pressure pumps through the injecting port on lower level of the cracks. Injecting shall be continued till the injecting material starts flowing from another port on higher level and the process shall be repeated on next port till injecting is done in all ports along the cracks. (f) After setting of epoxy grout cut the injectinion port at least 2 mm below the surface, cleaning etc. complete. The quantity of the Epoxy Resin actually consumed at site shall be accounted for the payment.

M&L for pressure shortcreting 25mm thick in cement concrete 1:1:2 (nominal mix) including necessary scaffolding to all affected area of RCC structure complete along with necessary saftey equipment as required for execution of the work as required complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast cement concrete block masonry type 1:5:8 using 40mm graded aggregate with solid blocks, exc 10cm in width and setting in CM 1:6 complete

M&L for Expanded metal n exc 4 kg / sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples fixed to wood or steel members complete all as specified and directed.

M&L for drilling 16mm dia holes in old concrete upto depth not less than 150mm cleaning the holes by blower and injecting grouting chemical of make-HILTI product HY-150 or equivalent into the holes & inserting 12 mm dia TMT bars into holes complete all as specified and directed. Note :- TMT bars shall be measured and paid seperately.

M/L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of birla white putty over one coat of primer complete all as specified and directed.

M/L for prepration of newly plasetered surface of wall/ceiling and applying two coats of oil bound distemper over one coat of birla white putty over one coat of primer complete all as specified and directed.

M&L preparation of newly plastered or unplastered wall surfaces and applying two coats of exterior ACRYLIC Emulsion paint (colour or shade as approved by GE) over and including a coat of primer as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning permise clean and tidy complete all as specified and directed by Engineer-in-Charge. Make : Apex ULTIMA/Berger weather coat ALL Guard including necessary steel scaffolding complete all as specified.

M&L for 5 mm rendering in CM 1:3 on fair face of wall or on concrete surfaces finished even and smooth with using extra cement including taking down old existing plaster complete all as specified and directed.

M&L for 10 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth with using extra cement including taking down old existning plaster complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in hard /dense soil complete all as specified and directed.

Description all as per item No 18.00 above but depth exceding 1.5mtr and not exceding 3mtr

Returning , filling in, including spreading leveling, watering and well ramming in layers n.exc 25cm each layer in soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting points complete all as specified and directed.

M&L for hardcore of broken stone or boulder of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for moorum/red bajri filling under floor/pavement or in foundation laid in layers n exc. 15cm thick, spread , levelled and rammed including watering and consolidation all as specified.

M & L for cement concrete 1:4:8 type D 2 using 40 mm .graded stone aggregate in foundation complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 complete all as specified and directed.

M&L for reinforced cement concrete M25 (Design mix) (using 20mm graded stone aggregate) as in foundation, incl raft footing, foundation beams, plinth beams, bases of columns etc complete all as specified and directed.

M&L for reinforced cement concrete M25 (Design mix) (using 20mm graded stone aggregate) as in columns, pillars, post etc complete all as specified and directed.

M&L for reinforced cement concrete M25 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, lintels etc and the like complete all as specified and directed.

M&L for reinforced cement concrete M25 (Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floor landing and the likecomplete all as specified and directed.

M&L for reinforced cement concrete M25 (Design mix) (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified and directed.

M & L for TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified and directed.

Use & waste of form work for rough finished flat surfaces such as side of concrete of foundation, footings, bases of columns and similar work vertical or to batter complete all as specified and directed.

Use & waste of form work for rough finished flat surfaces of concrete as in beams, lintels complete all as specified and directed.

Use & waste of form work for rough finished flat surfaces such as side of columns pillar post, struts pilers complete all as specified and directed.

Use & waste of form work for rough finished flat surfaces of concrete in chajja/shelves complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs, landing & similar works n.exc 200 mm thick etc complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal for sloping and similar work exc 10cm but n exc 20cm wide complete all as specified.

M&L for shingle filling in floors or pavings, laid in layers n.exc 15 cm thick spread, levelled and blinded with earth and rammed including watering complete all as specified and directed.

M&L for rendering 15mm thick in two layers, first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on concrete block masonry surfaces finished even and smooth without using extra cement as specified. Note : The rate of waterproofing compound shall be measured and paid seprately.

M&L for rendering 5mm thick in CM 1:3 mixed with water proofing compound @ 3% by weight of cement on ceiling surface finished even and smooth without using extra cement as specified. Note : The rate of waterproofing compound shall be measured and paid seprately.

Supply only Water Proofing Compound ISI Marked complete all as specified

M&L for 10 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered or unplastered surface of wall & applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered or unplastered surface of wall & applying two coats of cement based paint over one coat of primer with alkali resistent priming coat complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type BO using 12.5mm graded stone aggregate as in floors complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in sub base of floors complete all as specified and directed.

M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded aggregate) in plinth protection,floors and pavings complete all as specified.

M&L for 75mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase complete all as specified and directed.

M&L for non- skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed or bedding layer of cement mortar 1:4, 15mm thick complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10 mm thick rendering on fair faces of concrete surfaces in CM 1:4 as backing coat for tiles complete all as specified and directed.

M&L for applying cold bituminous primer @ 0.30 ltr/Sqm conforming to IS 3384 and laying APP polymer modified fiber glass reinforced membrane 3mm thick 3.5Kg/Sqm (modified bituminous water proofing membrane) with plain finish with ploystere base reinforcement sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane by torching the same all as per manufacturer instruction including one coat of butuminous aluminum paint @ 0.10 ltr/sqm over membrane Complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & as per TD drawing No CEAA/TD/149 Sheet 1/1 complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thik (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rai & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing No CEAA/TD/149 Sheet 1/1 complete all as specified and as directed.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm Butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75mm anodised aluminium handle cast type complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, sliding bolts, steel peg stay, complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with Glazing bars, dovetailed or welded complete all as specified and directed by engineer in charge.

Preparing new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.

S & F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S& F 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and directed by engr in charge

S & F steel water tubing medium grade galvanised with all fittings and fixed to complete to walls and ceilings or laid in floors to the following bore of pipe complete all as specified and directed:-

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

S&F 15 mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in flooring laid over and including 20mm thick cement screed in cement 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed in cement 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for anti termite tretment to the bottom, top and sides of excavation and top surface of field earth at the rate of 5 litres of emulsion per Square metre of surface area complete all as specified and directed.

M&L for anti termite tretment backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for anti termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

S/F, grating square 150mm size of PTMT (minimum weight 100 gms ) complete all as specified and directed.

M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed by engr-in charge.

S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints fixed to walls complete all as specified and directed of following size:-

110mm dia pipe

75mm dia pipe

Supply only Nitobond SBR 45 chemical complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T ) equal or un equal , complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T ) equal or un equal , complete all as specified and directed.

S&F 15mm Angular stop cock cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F vitreous China wash basin white flat back size 580x450mm including waste coupling, waste pipe and brackets for erecting stand complete all as specified and as directed.

S&F 15mm dia pillar taps fancy type with capstain heads chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shank and fly-nut, screws for iron pipe and fixed for 15mm dia of pipe complete all as specified and directed.

S&F PVC connection 15mm dia 450mm length with PTMT nuts complete all as specified and directed.

Supply & fix cast iron nahani trap 75mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed.

S&F Vitreous China soap tray of size 160mmx160mmx90mm (approximately) embedded in the wall complete all as specified and directed.

S&F vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and including flush pipe) including connection to trap and flushing pipe etc and making good the floor as per existing surface complete all as specified and as directed.

S&F 10ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F Flush pipes polythene low or high density of PVC 32mm dia to pedestal pan, including all joints complete all as specified and as directed.

S&F Rotational moulded polye­thylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F Rotational moulded polye­thylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete for Iron pipe or brass ferrule and fixed complete all as specified and directed.

Material and labour for reinforcement cement concrete (RCC) pipes, 200mm bore, class NP2, laid and jointed complete with collars in trenches and making joints and testing complete all as specified and directed.

Material and labour for concrete bed to drain pipes of 200 mm bore in cement concrete (1:3:6) type C2, (using 40mm graded stone aggregate) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material & labour for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in coping, benching and haunching against the side of manhole and the like incluiding weathering, slightly rounded or chamfered angles & inclduing necessary form work if required complete all as specified and directed.

Material & labour for providing reinforced cement concrete, M-25 grade design mix in cover slab (for manholes etc) and in the shelves and similar articles with plain faces including chamfers, weathering, throating and the like complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement complete all as specifed and directed. (Inner girth shall only be measured).

Preparing new plastered or unplastered surface of ceiling & applying three coats of white wash complete all as specified and directed.

M&L for cutting into existing manholes for connectng new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate)smooth finished and reforming benching as required for 150mm bore pipe complete all as specified and directed.

S&F MS Framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed gaurds bars; barred iron doors; ladders; framed balusters; walk ways; railways; railing; framework of watertanks and similar work conforming to Fe 290, Gde E- 165 complete all as specified.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed

M& L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment including 40mm thick sand bedding complete all as specified and directed

M/L for concealed Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed (FRLS) multistranded copper conductor cable 1100 volt grade enclosed in and including rigid steel conduit with accessories all as per ISI including sunk type boxes for mounting fitting like switches, socketes fan regulators with 3 mm thick phenolic Laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified and directed. complete all as specified and directed of following.

One light/fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on same board with other switch.

One 3 pin 5 Amps socket outlet on independent board

S&F switch piano flush type single pole one way 5 Amp 240 Volts complete all as specified and directed.

Supply and fixing socket outlet 3 pin 6 amps, 230/250 volt. flush type, ISI Marked. complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc.

Supply and fixing indoor decorative channel housing fitting slim LED batten 18 Watt with polycarbonate housing and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the same with two Nos PVC square box complete all as per specified and directed. Make :Orient as per cat No.LBLN-18-C-SQ or equivalent make mentioned in Appx

S&F energy saving LED light fitting 10 Watt Bulk head luminairecomplete with all acessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size 230 Votls. complete all as specified and directed

Supply and fixing Bulb LED 15 Watt suiable for holder

Supply and fixing bracket for security light made up of 32 mm dia GI pipe 'Light' grade bent to shape required length , over all length 1.2 mtr fixed to wall with two clamps made of 20 x 3 mm MS flat , 4 nos of bolts with nuts. complete all as specified and directed.

S & F MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. (Make: Schneider- Seimens /Legrand ) . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCB, single pole and neutral link 240 volts 40 to 63 Amps capacity B series complete all as specified and directed.

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity B series fixed in DB's complete all as specified and directed.

Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No. 3 of SSR Part-I. Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia unto 7.5 from the earth plate electrode & refillling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engr-in-Charge including demolishion of old and unsv existing earth pit and removing from site .

Supply and fixing exhaust fan with louvers of size 300 mm sweep, 900 RPM 230 volts single phase AC supply complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan for giving connection complete all as specified and directed by Engineer-in-Charge, Make- Havells, Khetan, Bajaj

S&F Ceiling Fan 1200 mm sweep 230 Volts AC complete including clamp, down rod, canoopy and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to fan complete all as specified and directed.

Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. Note:- Punned thickness shall only be measured for payment.

Supplying & Laying Sub Class `B’ bricks, old size, kiln burnt, laid with axis of brick perpendicular to the axis of the cable, for protection of cable all as specified and directed by Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning LT underground cables, 1100 volts grade of size 16 Sq mm 2 core, PVC insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-1554 marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed.

M& L for Isolater Double pole 63 Amp Ac 230 vlt ,"C' series complete all as specified and directed.

Material and labour for boring of roads/ hard cemented surface for insertion of 40 mm dia G I pipe for laying of cable and finish the surface as per existing complete all as specified and directed

Supply and fix GI tubing light grade for protection of cable at wall/trench of size 40mmdia bore complete all as specified and directed.

Supply and fixing LED security light luminaire 25 watt freedom , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete. Make : Orient as per cat No : LSFS-020-C or equivalent make as mentioned in appx

Supplying and laying LT cable XLPE insulated, screened, PVC bedded, galvanised steel strip armoured, electric power cables (heavy duty) with aluminium conductor through pipes, induct/ wall/ under roads/trenches, 1100 volt grade of size 6 Sqmm 2 core complete all as specified and directed.

Badri Electricals

Micro Protect